This patchset is based on 4.2-rc2 and [1], and contains minor fixes and
subsystem clocks support for Mediatek MT8173.
The previous reviews can be found in [2].
changes since v6:
- Use DUMMY_RATE (0) instead of typical rate for clocks that we don't care
and not controlled in CCF.
changes since v5:
- Rebase to 4.2-rc2.
- Patch "Fix enabling of critical clocks" had been included in 4.2-rc2,
so it need not be included in this patchset.
changes since v4:
- Add a separated patch to remove unused dpi_ck.
- Add separated patches to fix clk/mediatek in release 4.2-rc1.
- Add __init* for initialization data and functions.
- Rename dummy_clk with oscillator in DT.
- Remove mtk_clk_register_apmixed_ex(), call mtk_clk_register_ref2usb_tx()
directly to register USB clock.
changes since v3:
- Remove clk_null dependency from root clocks.
- Use fixed-rate clocks with typical rate to replace clk_null.
- Separate ref2usb_tx implementation to clk-apmixed.c
- Use clock-controller as the name of clock providers.
changes since v2:
- Rebase to 4.2-rc1.
- Add device tree nodes for subsystem clocks.
- Fine tune comments of patches.
- Add __init, __initconst and const to init data and functions.
- Removed unused code from init functions of subsystem clocks.
changes since v1:
- Add CA7PLL and CA15PLL as critical clocks.
- Use the same register descriptor for imgsys, vensys and vencltsys.
- Generalize apmixedsys special clocks registration.
[1] https://patchwork.kernel.org/patch/6446341/
[2] https://lkml.org/lkml/2015/8/4/111
James Liao (9):
clk: mediatek: Removed unused dpi_ck clock from MT8173
clk: mediatek: Remove unused code from MT8173.
clk: mediatek: Add __initdata and __init for data and functions
clk: mediatek: Add fixed clocks support for Mediatek SoC.
clk: mediatek: Fix rate and dependency of MT8173 clocks
dt-bindings: ARM: Mediatek: Document devicetree bindings for clock
controllers
clk: mediatek: Add subsystem clocks of MT8173
clk: mediatek: Add USB clock support in MT8173 APMIXEDSYS
arm64: dts: mt8173: Add subsystem clock controller device nodes
.../bindings/arm/mediatek/mediatek,imgsys.txt | 22 ++
.../bindings/arm/mediatek/mediatek,mmsys.txt | 22 ++
.../bindings/arm/mediatek/mediatek,vdecsys.txt | 22 ++
.../bindings/arm/mediatek/mediatek,vencltsys.txt | 22 ++
.../bindings/arm/mediatek/mediatek,vencsys.txt | 22 ++
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 37 +++
drivers/clk/mediatek/Makefile | 2 +-
drivers/clk/mediatek/clk-apmixed.c | 107 +++++++
drivers/clk/mediatek/clk-gate.c | 2 +-
drivers/clk/mediatek/clk-mt8173.c | 342 ++++++++++++++++++++-
drivers/clk/mediatek/clk-mtk.c | 36 ++-
drivers/clk/mediatek/clk-mtk.h | 24 +-
drivers/clk/mediatek/clk-pll.c | 7 +-
include/dt-bindings/clock/mt8173-clk.h | 101 +++++-
14 files changed, 735 insertions(+), 33 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,vencltsys.txt
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt
create mode 100644 drivers/clk/mediatek/clk-apmixed.c
--
1.8.1.1.dirty
The dpi_ck clock can be removed because it not actually used
in topckgen and subsystems.
Signed-off-by: James Liao <[email protected]>
---
drivers/clk/mediatek/clk-mt8173.c | 1 -
include/dt-bindings/clock/mt8173-clk.h | 1 -
2 files changed, 2 deletions(-)
diff --git a/drivers/clk/mediatek/clk-mt8173.c b/drivers/clk/mediatek/clk-mt8173.c
index 8b6523d..80871e2 100644
--- a/drivers/clk/mediatek/clk-mt8173.c
+++ b/drivers/clk/mediatek/clk-mt8173.c
@@ -26,7 +26,6 @@ static DEFINE_SPINLOCK(mt8173_clk_lock);
static const struct mtk_fixed_factor root_clk_alias[] __initconst = {
FACTOR(CLK_TOP_CLKPH_MCK_O, "clkph_mck_o", "clk_null", 1, 1),
- FACTOR(CLK_TOP_DPI, "dpi_ck", "clk_null", 1, 1),
FACTOR(CLK_TOP_USB_SYSPLL_125M, "usb_syspll_125m", "clk_null", 1, 1),
FACTOR(CLK_TOP_HDMITX_DIG_CTS, "hdmitx_dig_cts", "clk_null", 1, 1),
};
diff --git a/include/dt-bindings/clock/mt8173-clk.h b/include/dt-bindings/clock/mt8173-clk.h
index 4ad76ed..7230c38 100644
--- a/include/dt-bindings/clock/mt8173-clk.h
+++ b/include/dt-bindings/clock/mt8173-clk.h
@@ -18,7 +18,6 @@
/* TOPCKGEN */
#define CLK_TOP_CLKPH_MCK_O 1
-#define CLK_TOP_DPI 2
#define CLK_TOP_USB_SYSPLL_125M 3
#define CLK_TOP_HDMITX_DIG_CTS 4
#define CLK_TOP_ARMCA7PLL_754M 5
--
1.8.1.1.dirty
Remove unused header files from MT8173, and remove unused
keywords from function declaration.
Signed-off-by: James Liao <[email protected]>
---
drivers/clk/mediatek/clk-mt8173.c | 2 --
drivers/clk/mediatek/clk-mtk.h | 4 ++--
2 files changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/clk/mediatek/clk-mt8173.c b/drivers/clk/mediatek/clk-mt8173.c
index 80871e2..13aa432 100644
--- a/drivers/clk/mediatek/clk-mt8173.c
+++ b/drivers/clk/mediatek/clk-mt8173.c
@@ -14,8 +14,6 @@
#include <linux/of.h>
#include <linux/of_address.h>
-#include <linux/slab.h>
-#include <linux/mfd/syscon.h>
#include "clk-mtk.h"
#include "clk-gate.h"
diff --git a/drivers/clk/mediatek/clk-mtk.h b/drivers/clk/mediatek/clk-mtk.h
index 9dda9d8..740fe5e 100644
--- a/drivers/clk/mediatek/clk-mtk.h
+++ b/drivers/clk/mediatek/clk-mtk.h
@@ -41,7 +41,7 @@ struct mtk_fixed_factor {
.div = _div, \
}
-extern void mtk_clk_register_factors(const struct mtk_fixed_factor *clks,
+void mtk_clk_register_factors(const struct mtk_fixed_factor *clks,
int num, struct clk_onecell_data *clk_data);
struct mtk_composite {
@@ -152,7 +152,7 @@ struct mtk_pll_data {
int pcw_shift;
};
-void __init mtk_clk_register_plls(struct device_node *node,
+void mtk_clk_register_plls(struct device_node *node,
const struct mtk_pll_data *plls, int num_plls,
struct clk_onecell_data *clk_data);
--
1.8.1.1.dirty
Add __init for clock registration functions, and add __initdata for
mtk_gate_regs initial structures.
Signed-off-by: James Liao <[email protected]>
---
drivers/clk/mediatek/clk-gate.c | 2 +-
drivers/clk/mediatek/clk-mt8173.c | 6 +++---
drivers/clk/mediatek/clk-mtk.c | 13 +++++++------
3 files changed, 11 insertions(+), 10 deletions(-)
diff --git a/drivers/clk/mediatek/clk-gate.c b/drivers/clk/mediatek/clk-gate.c
index 5702036..576bdb7 100644
--- a/drivers/clk/mediatek/clk-gate.c
+++ b/drivers/clk/mediatek/clk-gate.c
@@ -97,7 +97,7 @@ const struct clk_ops mtk_clk_gate_ops_setclr_inv = {
.disable = mtk_cg_disable_inv,
};
-struct clk *mtk_clk_register_gate(
+struct clk * __init mtk_clk_register_gate(
const char *name,
const char *parent_name,
struct regmap *regmap,
diff --git a/drivers/clk/mediatek/clk-mt8173.c b/drivers/clk/mediatek/clk-mt8173.c
index 13aa432..361fe32 100644
--- a/drivers/clk/mediatek/clk-mt8173.c
+++ b/drivers/clk/mediatek/clk-mt8173.c
@@ -586,7 +586,7 @@ static const struct mtk_composite top_muxes[] __initconst = {
MUX(CLK_TOP_I2S3_B_SEL, "i2s3_b_ck_sel", i2s3_b_ck_parents, 0x120, 8, 1),
};
-static const struct mtk_gate_regs infra_cg_regs = {
+static const struct mtk_gate_regs infra_cg_regs __initconst = {
.set_ofs = 0x0040,
.clr_ofs = 0x0044,
.sta_ofs = 0x0048,
@@ -615,13 +615,13 @@ static const struct mtk_gate infra_clks[] __initconst = {
GATE_ICG(CLK_INFRA_PMICWRAP, "infra_pmicwrap", "axi_sel", 23),
};
-static const struct mtk_gate_regs peri0_cg_regs = {
+static const struct mtk_gate_regs peri0_cg_regs __initconst = {
.set_ofs = 0x0008,
.clr_ofs = 0x0010,
.sta_ofs = 0x0018,
};
-static const struct mtk_gate_regs peri1_cg_regs = {
+static const struct mtk_gate_regs peri1_cg_regs __initconst = {
.set_ofs = 0x000c,
.clr_ofs = 0x0014,
.sta_ofs = 0x001c,
diff --git a/drivers/clk/mediatek/clk-mtk.c b/drivers/clk/mediatek/clk-mtk.c
index 18444ae..268b6ff 100644
--- a/drivers/clk/mediatek/clk-mtk.c
+++ b/drivers/clk/mediatek/clk-mtk.c
@@ -24,7 +24,7 @@
#include "clk-mtk.h"
#include "clk-gate.h"
-struct clk_onecell_data *mtk_alloc_clk_data(unsigned int clk_num)
+struct clk_onecell_data * __init mtk_alloc_clk_data(unsigned int clk_num)
{
int i;
struct clk_onecell_data *clk_data;
@@ -49,8 +49,8 @@ err_out:
return NULL;
}
-void mtk_clk_register_factors(const struct mtk_fixed_factor *clks, int num,
- struct clk_onecell_data *clk_data)
+void __init mtk_clk_register_factors(const struct mtk_fixed_factor *clks,
+ int num, struct clk_onecell_data *clk_data)
{
int i;
struct clk *clk;
@@ -72,7 +72,8 @@ void mtk_clk_register_factors(const struct mtk_fixed_factor *clks, int num,
}
}
-int mtk_clk_register_gates(struct device_node *node, const struct mtk_gate *clks,
+int __init mtk_clk_register_gates(struct device_node *node,
+ const struct mtk_gate *clks,
int num, struct clk_onecell_data *clk_data)
{
int i;
@@ -111,7 +112,7 @@ int mtk_clk_register_gates(struct device_node *node, const struct mtk_gate *clks
return 0;
}
-struct clk *mtk_clk_register_composite(const struct mtk_composite *mc,
+struct clk * __init mtk_clk_register_composite(const struct mtk_composite *mc,
void __iomem *base, spinlock_t *lock)
{
struct clk *clk;
@@ -196,7 +197,7 @@ err_out:
return ERR_PTR(ret);
}
-void mtk_clk_register_composites(const struct mtk_composite *mcs,
+void __init mtk_clk_register_composites(const struct mtk_composite *mcs,
int num, void __iomem *base, spinlock_t *lock,
struct clk_onecell_data *clk_data)
{
--
1.8.1.1.dirty
This patch adds fixed clocks support by using CCF fixed-rate
clock implementation.
Signed-off-by: James Liao <[email protected]>
---
drivers/clk/mediatek/clk-mtk.c | 23 +++++++++++++++++++++++
drivers/clk/mediatek/clk-mtk.h | 17 +++++++++++++++++
2 files changed, 40 insertions(+)
diff --git a/drivers/clk/mediatek/clk-mtk.c b/drivers/clk/mediatek/clk-mtk.c
index 268b6ff..cf08db6 100644
--- a/drivers/clk/mediatek/clk-mtk.c
+++ b/drivers/clk/mediatek/clk-mtk.c
@@ -49,6 +49,29 @@ err_out:
return NULL;
}
+void __init mtk_clk_register_fixed_clks(const struct mtk_fixed_clk *clks,
+ int num, struct clk_onecell_data *clk_data)
+{
+ int i;
+ struct clk *clk;
+
+ for (i = 0; i < num; i++) {
+ const struct mtk_fixed_clk *rc = &clks[i];
+
+ clk = clk_register_fixed_rate(NULL, rc->name, rc->parent,
+ rc->parent ? 0 : CLK_IS_ROOT, rc->rate);
+
+ if (IS_ERR(clk)) {
+ pr_err("Failed to register clk %s: %ld\n",
+ rc->name, PTR_ERR(clk));
+ continue;
+ }
+
+ if (clk_data)
+ clk_data->clks[rc->id] = clk;
+ }
+}
+
void __init mtk_clk_register_factors(const struct mtk_fixed_factor *clks,
int num, struct clk_onecell_data *clk_data)
{
diff --git a/drivers/clk/mediatek/clk-mtk.h b/drivers/clk/mediatek/clk-mtk.h
index 740fe5e..32d4f55 100644
--- a/drivers/clk/mediatek/clk-mtk.h
+++ b/drivers/clk/mediatek/clk-mtk.h
@@ -25,6 +25,23 @@
#define MHZ (1000 * 1000)
+struct mtk_fixed_clk {
+ int id;
+ const char *name;
+ const char *parent;
+ unsigned long rate;
+};
+
+#define FIXED_CLK(_id, _name, _parent, _rate) { \
+ .id = _id, \
+ .name = _name, \
+ .parent = _parent, \
+ .rate = _rate, \
+ }
+
+void mtk_clk_register_fixed_clks(const struct mtk_fixed_clk *clks,
+ int num, struct clk_onecell_data *clk_data);
+
struct mtk_fixed_factor {
int id;
const char *name;
--
1.8.1.1.dirty
Remove the dependency from clk_null, and give all root clocks a
typical rate, include clkph_mck_o, usb_syspll_125m and hdmitx_dig_cts.
dpi_ck was removed due to no clock reference to it.
Replace parent clock of infra_cpum with cpum_ck, which is an external
clock and can be defined in the device tree.
Signed-off-by: James Liao <[email protected]>
---
drivers/clk/mediatek/clk-mt8173.c | 19 +++++++++++++------
1 file changed, 13 insertions(+), 6 deletions(-)
diff --git a/drivers/clk/mediatek/clk-mt8173.c b/drivers/clk/mediatek/clk-mt8173.c
index 361fe32..c251787 100644
--- a/drivers/clk/mediatek/clk-mt8173.c
+++ b/drivers/clk/mediatek/clk-mt8173.c
@@ -20,12 +20,18 @@
#include <dt-bindings/clock/mt8173-clk.h>
+/*
+ * For some clocks, we don't care what their actual rates are. And these
+ * clocks may change their rate on different products or different scenarios.
+ * So we model these clocks' rate as 0, to denote it's not an actual rate.
+ */
+#define DUMMY_RATE 0
+
static DEFINE_SPINLOCK(mt8173_clk_lock);
-static const struct mtk_fixed_factor root_clk_alias[] __initconst = {
- FACTOR(CLK_TOP_CLKPH_MCK_O, "clkph_mck_o", "clk_null", 1, 1),
- FACTOR(CLK_TOP_USB_SYSPLL_125M, "usb_syspll_125m", "clk_null", 1, 1),
- FACTOR(CLK_TOP_HDMITX_DIG_CTS, "hdmitx_dig_cts", "clk_null", 1, 1),
+static const struct mtk_fixed_clk fixed_clks[] __initconst = {
+ FIXED_CLK(CLK_TOP_CLKPH_MCK_O, "clkph_mck_o", "clk26m", DUMMY_RATE),
+ FIXED_CLK(CLK_TOP_USB_SYSPLL_125M, "usb_syspll_125m", "clk26m", 125 * MHZ),
};
static const struct mtk_fixed_factor top_divs[] __initconst = {
@@ -50,6 +56,7 @@ static const struct mtk_fixed_factor top_divs[] __initconst = {
FACTOR(CLK_TOP_CLKRTC_INT, "clkrtc_int", "clk26m", 1, 793),
FACTOR(CLK_TOP_FPC, "fpc_ck", "clk26m", 1, 1),
+ FACTOR(CLK_TOP_HDMITX_DIG_CTS, "hdmitx_dig_cts", "tvdpll_445p5m", 1, 3),
FACTOR(CLK_TOP_HDMITXPLL_D2, "hdmitxpll_d2", "hdmitx_dig_cts", 1, 2),
FACTOR(CLK_TOP_HDMITXPLL_D3, "hdmitxpll_d3", "hdmitx_dig_cts", 1, 3),
@@ -608,7 +615,7 @@ static const struct mtk_gate infra_clks[] __initconst = {
GATE_ICG(CLK_INFRA_GCE, "infra_gce", "axi_sel", 6),
GATE_ICG(CLK_INFRA_L2C_SRAM, "infra_l2c_sram", "axi_sel", 7),
GATE_ICG(CLK_INFRA_M4U, "infra_m4u", "mem_sel", 8),
- GATE_ICG(CLK_INFRA_CPUM, "infra_cpum", "clk_null", 15),
+ GATE_ICG(CLK_INFRA_CPUM, "infra_cpum", "cpum_ck", 15),
GATE_ICG(CLK_INFRA_KP, "infra_kp", "axi_sel", 16),
GATE_ICG(CLK_INFRA_CEC, "infra_cec", "clk26m", 18),
GATE_ICG(CLK_INFRA_PMICSPI, "infra_pmicspi", "pmicspi_sel", 22),
@@ -727,7 +734,7 @@ static void __init mtk_topckgen_init(struct device_node *node)
mt8173_top_clk_data = clk_data = mtk_alloc_clk_data(CLK_TOP_NR_CLK);
- mtk_clk_register_factors(root_clk_alias, ARRAY_SIZE(root_clk_alias), clk_data);
+ mtk_clk_register_fixed_clks(fixed_clks, ARRAY_SIZE(fixed_clks), clk_data);
mtk_clk_register_factors(top_divs, ARRAY_SIZE(top_divs), clk_data);
mtk_clk_register_composites(top_muxes, ARRAY_SIZE(top_muxes), base,
&mt8173_clk_lock, clk_data);
--
1.8.1.1.dirty
This adds the binding documentation for the mmsys, imgsys, vdecsys,
vencsys and vencltsys controllers found on Mediatek SoCs.
Signed-off-by: James Liao <[email protected]>
---
.../bindings/arm/mediatek/mediatek,imgsys.txt | 22 ++++++++++++++++++++++
.../bindings/arm/mediatek/mediatek,mmsys.txt | 22 ++++++++++++++++++++++
.../bindings/arm/mediatek/mediatek,vdecsys.txt | 22 ++++++++++++++++++++++
.../bindings/arm/mediatek/mediatek,vencltsys.txt | 22 ++++++++++++++++++++++
.../bindings/arm/mediatek/mediatek,vencsys.txt | 22 ++++++++++++++++++++++
5 files changed, 110 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,vencltsys.txt
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt
new file mode 100644
index 0000000..b1f2ce1
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt
@@ -0,0 +1,22 @@
+Mediatek imgsys controller
+============================
+
+The Mediatek imgsys controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be:
+ - "mediatek,mt8173-imgsys", "syscon"
+- #clock-cells: Must be 1
+
+The imgsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+imgsys: clock-controller@15000000 {
+ compatible = "mediatek,mt8173-imgsys", "syscon";
+ reg = <0 0x15000000 0 0x1000>;
+ #clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
new file mode 100644
index 0000000..4385946
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
@@ -0,0 +1,22 @@
+Mediatek mmsys controller
+============================
+
+The Mediatek mmsys controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be:
+ - "mediatek,mt8173-mmsys", "syscon"
+- #clock-cells: Must be 1
+
+The mmsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+mmsys: clock-controller@14000000 {
+ compatible = "mediatek,mt8173-mmsys", "syscon";
+ reg = <0 0x14000000 0 0x1000>;
+ #clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt
new file mode 100644
index 0000000..1faacf1
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt
@@ -0,0 +1,22 @@
+Mediatek vdecsys controller
+============================
+
+The Mediatek vdecsys controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be:
+ - "mediatek,mt8173-vdecsys", "syscon"
+- #clock-cells: Must be 1
+
+The vdecsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+vdecsys: clock-controller@16000000 {
+ compatible = "mediatek,mt8173-vdecsys", "syscon";
+ reg = <0 0x16000000 0 0x1000>;
+ #clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencltsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencltsys.txt
new file mode 100644
index 0000000..3cc299f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencltsys.txt
@@ -0,0 +1,22 @@
+Mediatek vencltsys controller
+============================
+
+The Mediatek vencltsys controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be:
+ - "mediatek,mt8173-vencltsys", "syscon"
+- #clock-cells: Must be 1
+
+The vencltsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+vencltsys: clock-controller@19000000 {
+ compatible = "mediatek,mt8173-vencltsys", "syscon";
+ reg = <0 0x19000000 0 0x1000>;
+ #clock-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt
new file mode 100644
index 0000000..5bb2866
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt
@@ -0,0 +1,22 @@
+Mediatek vencsys controller
+============================
+
+The Mediatek vencsys controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be:
+ - "mediatek,mt8173-vencsys", "syscon"
+- #clock-cells: Must be 1
+
+The vencsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+Example:
+
+vencsys: clock-controller@18000000 {
+ compatible = "mediatek,mt8173-vencsys", "syscon";
+ reg = <0 0x18000000 0 0x1000>;
+ #clock-cells = <1>;
+};
--
1.8.1.1.dirty
Most multimedia subsystem clocks will be accessed by multiple
drivers, so it's a better way to manage these clocks in CCF.
This patch adds clock support for MM, IMG, VDEC, VENC and VENC_LT
subsystems.
Signed-off-by: James Liao <[email protected]>
---
drivers/clk/mediatek/clk-mt8173.c | 267 +++++++++++++++++++++++++++++++++
include/dt-bindings/clock/mt8173-clk.h | 97 +++++++++++-
2 files changed, 361 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/mediatek/clk-mt8173.c b/drivers/clk/mediatek/clk-mt8173.c
index c251787..14f61f1 100644
--- a/drivers/clk/mediatek/clk-mt8173.c
+++ b/drivers/clk/mediatek/clk-mt8173.c
@@ -32,6 +32,10 @@ static DEFINE_SPINLOCK(mt8173_clk_lock);
static const struct mtk_fixed_clk fixed_clks[] __initconst = {
FIXED_CLK(CLK_TOP_CLKPH_MCK_O, "clkph_mck_o", "clk26m", DUMMY_RATE),
FIXED_CLK(CLK_TOP_USB_SYSPLL_125M, "usb_syspll_125m", "clk26m", 125 * MHZ),
+ FIXED_CLK(CLK_TOP_DSI0_DIG, "dsi0_dig", "clk26m", DUMMY_RATE),
+ FIXED_CLK(CLK_TOP_DSI1_DIG, "dsi1_dig", "clk26m", DUMMY_RATE),
+ FIXED_CLK(CLK_TOP_LVDS_PXL, "lvds_pxl", "lvdspll", DUMMY_RATE),
+ FIXED_CLK(CLK_TOP_LVDS_CTS, "lvds_cts", "lvdspll", DUMMY_RATE),
};
static const struct mtk_fixed_factor top_divs[] __initconst = {
@@ -704,6 +708,183 @@ static const struct mtk_composite peri_clks[] __initconst = {
MUX(CLK_PERI_UART3_SEL, "uart3_ck_sel", uart_ck_sel_parents, 0x40c, 3, 1),
};
+static const struct mtk_gate_regs cg_regs_4_8_0 __initconst = {
+ .set_ofs = 0x0004,
+ .clr_ofs = 0x0008,
+ .sta_ofs = 0x0000,
+};
+
+#define GATE_IMG(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &cg_regs_4_8_0, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+static const struct mtk_gate img_clks[] __initconst = {
+ GATE_IMG(CLK_IMG_LARB2_SMI, "img_larb2_smi", "mm_sel", 0),
+ GATE_IMG(CLK_IMG_CAM_SMI, "img_cam_smi", "mm_sel", 5),
+ GATE_IMG(CLK_IMG_CAM_CAM, "img_cam_cam", "mm_sel", 6),
+ GATE_IMG(CLK_IMG_SEN_TG, "img_sen_tg", "camtg_sel", 7),
+ GATE_IMG(CLK_IMG_SEN_CAM, "img_sen_cam", "mm_sel", 8),
+ GATE_IMG(CLK_IMG_CAM_SV, "img_cam_sv", "mm_sel", 9),
+ GATE_IMG(CLK_IMG_FD, "img_fd", "mm_sel", 11),
+};
+
+static const struct mtk_gate_regs mm0_cg_regs __initconst = {
+ .set_ofs = 0x0104,
+ .clr_ofs = 0x0108,
+ .sta_ofs = 0x0100,
+};
+
+static const struct mtk_gate_regs mm1_cg_regs __initconst = {
+ .set_ofs = 0x0114,
+ .clr_ofs = 0x0118,
+ .sta_ofs = 0x0110,
+};
+
+#define GATE_MM0(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &mm0_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+#define GATE_MM1(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &mm1_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr, \
+ }
+
+static const struct mtk_gate mm_clks[] __initconst = {
+ /* MM0 */
+ GATE_MM0(CLK_MM_SMI_COMMON, "mm_smi_common", "mm_sel", 0),
+ GATE_MM0(CLK_MM_SMI_LARB0, "mm_smi_larb0", "mm_sel", 1),
+ GATE_MM0(CLK_MM_CAM_MDP, "mm_cam_mdp", "mm_sel", 2),
+ GATE_MM0(CLK_MM_MDP_RDMA0, "mm_mdp_rdma0", "mm_sel", 3),
+ GATE_MM0(CLK_MM_MDP_RDMA1, "mm_mdp_rdma1", "mm_sel", 4),
+ GATE_MM0(CLK_MM_MDP_RSZ0, "mm_mdp_rsz0", "mm_sel", 5),
+ GATE_MM0(CLK_MM_MDP_RSZ1, "mm_mdp_rsz1", "mm_sel", 6),
+ GATE_MM0(CLK_MM_MDP_RSZ2, "mm_mdp_rsz2", "mm_sel", 7),
+ GATE_MM0(CLK_MM_MDP_TDSHP0, "mm_mdp_tdshp0", "mm_sel", 8),
+ GATE_MM0(CLK_MM_MDP_TDSHP1, "mm_mdp_tdshp1", "mm_sel", 9),
+ GATE_MM0(CLK_MM_MDP_WDMA, "mm_mdp_wdma", "mm_sel", 11),
+ GATE_MM0(CLK_MM_MDP_WROT0, "mm_mdp_wrot0", "mm_sel", 12),
+ GATE_MM0(CLK_MM_MDP_WROT1, "mm_mdp_wrot1", "mm_sel", 13),
+ GATE_MM0(CLK_MM_FAKE_ENG, "mm_fake_eng", "mm_sel", 14),
+ GATE_MM0(CLK_MM_MUTEX_32K, "mm_mutex_32k", "rtc_sel", 15),
+ GATE_MM0(CLK_MM_DISP_OVL0, "mm_disp_ovl0", "mm_sel", 16),
+ GATE_MM0(CLK_MM_DISP_OVL1, "mm_disp_ovl1", "mm_sel", 17),
+ GATE_MM0(CLK_MM_DISP_RDMA0, "mm_disp_rdma0", "mm_sel", 18),
+ GATE_MM0(CLK_MM_DISP_RDMA1, "mm_disp_rdma1", "mm_sel", 19),
+ GATE_MM0(CLK_MM_DISP_RDMA2, "mm_disp_rdma2", "mm_sel", 20),
+ GATE_MM0(CLK_MM_DISP_WDMA0, "mm_disp_wdma0", "mm_sel", 21),
+ GATE_MM0(CLK_MM_DISP_WDMA1, "mm_disp_wdma1", "mm_sel", 22),
+ GATE_MM0(CLK_MM_DISP_COLOR0, "mm_disp_color0", "mm_sel", 23),
+ GATE_MM0(CLK_MM_DISP_COLOR1, "mm_disp_color1", "mm_sel", 24),
+ GATE_MM0(CLK_MM_DISP_AAL, "mm_disp_aal", "mm_sel", 25),
+ GATE_MM0(CLK_MM_DISP_GAMMA, "mm_disp_gamma", "mm_sel", 26),
+ GATE_MM0(CLK_MM_DISP_UFOE, "mm_disp_ufoe", "mm_sel", 27),
+ GATE_MM0(CLK_MM_DISP_SPLIT0, "mm_disp_split0", "mm_sel", 28),
+ GATE_MM0(CLK_MM_DISP_SPLIT1, "mm_disp_split1", "mm_sel", 29),
+ GATE_MM0(CLK_MM_DISP_MERGE, "mm_disp_merge", "mm_sel", 30),
+ GATE_MM0(CLK_MM_DISP_OD, "mm_disp_od", "mm_sel", 31),
+ /* MM1 */
+ GATE_MM1(CLK_MM_DISP_PWM0MM, "mm_disp_pwm0mm", "mm_sel", 0),
+ GATE_MM1(CLK_MM_DISP_PWM026M, "mm_disp_pwm026m", "pwm_sel", 1),
+ GATE_MM1(CLK_MM_DISP_PWM1MM, "mm_disp_pwm1mm", "mm_sel", 2),
+ GATE_MM1(CLK_MM_DISP_PWM126M, "mm_disp_pwm126m", "pwm_sel", 3),
+ GATE_MM1(CLK_MM_DSI0_ENGINE, "mm_dsi0_engine", "mm_sel", 4),
+ GATE_MM1(CLK_MM_DSI0_DIGITAL, "mm_dsi0_digital", "dsi0_dig", 5),
+ GATE_MM1(CLK_MM_DSI1_ENGINE, "mm_dsi1_engine", "mm_sel", 6),
+ GATE_MM1(CLK_MM_DSI1_DIGITAL, "mm_dsi1_digital", "dsi1_dig", 7),
+ GATE_MM1(CLK_MM_DPI_PIXEL, "mm_dpi_pixel", "dpi0_sel", 8),
+ GATE_MM1(CLK_MM_DPI_ENGINE, "mm_dpi_engine", "mm_sel", 9),
+ GATE_MM1(CLK_MM_DPI1_PIXEL, "mm_dpi1_pixel", "lvds_pxl", 10),
+ GATE_MM1(CLK_MM_DPI1_ENGINE, "mm_dpi1_engine", "mm_sel", 11),
+ GATE_MM1(CLK_MM_HDMI_PIXEL, "mm_hdmi_pixel", "dpi0_sel", 12),
+ GATE_MM1(CLK_MM_HDMI_PLLCK, "mm_hdmi_pllck", "hdmi_sel", 13),
+ GATE_MM1(CLK_MM_HDMI_AUDIO, "mm_hdmi_audio", "apll1", 14),
+ GATE_MM1(CLK_MM_HDMI_SPDIF, "mm_hdmi_spdif", "apll2", 15),
+ GATE_MM1(CLK_MM_LVDS_PIXEL, "mm_lvds_pixel", "lvds_pxl", 16),
+ GATE_MM1(CLK_MM_LVDS_CTS, "mm_lvds_cts", "lvds_cts", 17),
+ GATE_MM1(CLK_MM_SMI_LARB4, "mm_smi_larb4", "mm_sel", 18),
+ GATE_MM1(CLK_MM_HDMI_HDCP, "mm_hdmi_hdcp", "hdcp_sel", 19),
+ GATE_MM1(CLK_MM_HDMI_HDCP24M, "mm_hdmi_hdcp24m", "hdcp_24m_sel", 20),
+};
+
+static const struct mtk_gate_regs vdec0_cg_regs __initconst = {
+ .set_ofs = 0x0000,
+ .clr_ofs = 0x0004,
+ .sta_ofs = 0x0000,
+};
+
+static const struct mtk_gate_regs vdec1_cg_regs __initconst = {
+ .set_ofs = 0x0008,
+ .clr_ofs = 0x000c,
+ .sta_ofs = 0x0008,
+};
+
+#define GATE_VDEC0(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &vdec0_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr_inv, \
+ }
+
+#define GATE_VDEC1(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &vdec1_cg_regs, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr_inv, \
+ }
+
+static const struct mtk_gate vdec_clks[] __initconst = {
+ GATE_VDEC0(CLK_VDEC_CKEN, "vdec_cken", "vdec_sel", 0),
+ GATE_VDEC1(CLK_VDEC_LARB_CKEN, "vdec_larb_cken", "mm_sel", 0),
+};
+
+#define GATE_VENC(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &cg_regs_4_8_0, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr_inv, \
+ }
+
+static const struct mtk_gate venc_clks[] __initconst = {
+ GATE_VENC(CLK_VENC_CKE0, "venc_cke0", "mm_sel", 0),
+ GATE_VENC(CLK_VENC_CKE1, "venc_cke1", "venc_sel", 4),
+ GATE_VENC(CLK_VENC_CKE2, "venc_cke2", "venc_sel", 8),
+ GATE_VENC(CLK_VENC_CKE3, "venc_cke3", "venc_sel", 12),
+};
+
+#define GATE_VENCLT(_id, _name, _parent, _shift) { \
+ .id = _id, \
+ .name = _name, \
+ .parent_name = _parent, \
+ .regs = &cg_regs_4_8_0, \
+ .shift = _shift, \
+ .ops = &mtk_clk_gate_ops_setclr_inv, \
+ }
+
+static const struct mtk_gate venclt_clks[] __initconst = {
+ GATE_VENCLT(CLK_VENCLT_CKE0, "venclt_cke0", "mm_sel", 0),
+ GATE_VENCLT(CLK_VENCLT_CKE1, "venclt_cke1", "venclt_sel", 4),
+};
+
static struct clk_onecell_data *mt8173_top_clk_data __initdata;
static struct clk_onecell_data *mt8173_pll_clk_data __initdata;
@@ -848,3 +1029,89 @@ static void __init mtk_apmixedsys_init(struct device_node *node)
}
CLK_OF_DECLARE(mtk_apmixedsys, "mediatek,mt8173-apmixedsys",
mtk_apmixedsys_init);
+
+static void __init mtk_imgsys_init(struct device_node *node)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+
+ clk_data = mtk_alloc_clk_data(CLK_IMG_NR_CLK);
+
+ mtk_clk_register_gates(node, img_clks, ARRAY_SIZE(img_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+}
+CLK_OF_DECLARE(mtk_imgsys, "mediatek,mt8173-imgsys", mtk_imgsys_init);
+
+static void __init mtk_mmsys_init(struct device_node *node)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+
+ clk_data = mtk_alloc_clk_data(CLK_MM_NR_CLK);
+
+ mtk_clk_register_gates(node, mm_clks, ARRAY_SIZE(mm_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+}
+CLK_OF_DECLARE(mtk_mmsys, "mediatek,mt8173-mmsys", mtk_mmsys_init);
+
+static void __init mtk_vdecsys_init(struct device_node *node)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+
+ clk_data = mtk_alloc_clk_data(CLK_VDEC_NR_CLK);
+
+ mtk_clk_register_gates(node, vdec_clks, ARRAY_SIZE(vdec_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+}
+CLK_OF_DECLARE(mtk_vdecsys, "mediatek,mt8173-vdecsys", mtk_vdecsys_init);
+
+static void __init mtk_vencsys_init(struct device_node *node)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+
+ clk_data = mtk_alloc_clk_data(CLK_VENC_NR_CLK);
+
+ mtk_clk_register_gates(node, venc_clks, ARRAY_SIZE(venc_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+}
+CLK_OF_DECLARE(mtk_vencsys, "mediatek,mt8173-vencsys", mtk_vencsys_init);
+
+static void __init mtk_vencltsys_init(struct device_node *node)
+{
+ struct clk_onecell_data *clk_data;
+ int r;
+
+ clk_data = mtk_alloc_clk_data(CLK_VENCLT_NR_CLK);
+
+ mtk_clk_register_gates(node, venclt_clks, ARRAY_SIZE(venclt_clks),
+ clk_data);
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+}
+CLK_OF_DECLARE(mtk_vencltsys, "mediatek,mt8173-vencltsys", mtk_vencltsys_init);
diff --git a/include/dt-bindings/clock/mt8173-clk.h b/include/dt-bindings/clock/mt8173-clk.h
index 7230c38..87820ee 100644
--- a/include/dt-bindings/clock/mt8173-clk.h
+++ b/include/dt-bindings/clock/mt8173-clk.h
@@ -153,12 +153,16 @@
#define CLK_TOP_I2S2_M_SEL 135
#define CLK_TOP_I2S3_M_SEL 136
#define CLK_TOP_I2S3_B_SEL 137
-#define CLK_TOP_NR_CLK 138
+#define CLK_TOP_DSI0_DIG 138
+#define CLK_TOP_DSI1_DIG 139
+#define CLK_TOP_LVDS_PXL 140
+#define CLK_TOP_LVDS_CTS 141
+#define CLK_TOP_NR_CLK 142
/* APMIXED_SYS */
-#define CLK_APMIXED_ARMCA15PLL 1
-#define CLK_APMIXED_ARMCA7PLL 2
+#define CLK_APMIXED_ARMCA15PLL 1
+#define CLK_APMIXED_ARMCA7PLL 2
#define CLK_APMIXED_MAINPLL 3
#define CLK_APMIXED_UNIVPLL 4
#define CLK_APMIXED_MMPLL 5
@@ -231,4 +235,91 @@
#define CLK_PERI_UART3_SEL 39
#define CLK_PERI_NR_CLK 40
+/* IMG_SYS */
+
+#define CLK_IMG_LARB2_SMI 1
+#define CLK_IMG_CAM_SMI 2
+#define CLK_IMG_CAM_CAM 3
+#define CLK_IMG_SEN_TG 4
+#define CLK_IMG_SEN_CAM 5
+#define CLK_IMG_CAM_SV 6
+#define CLK_IMG_FD 7
+#define CLK_IMG_NR_CLK 8
+
+/* MM_SYS */
+
+#define CLK_MM_SMI_COMMON 1
+#define CLK_MM_SMI_LARB0 2
+#define CLK_MM_CAM_MDP 3
+#define CLK_MM_MDP_RDMA0 4
+#define CLK_MM_MDP_RDMA1 5
+#define CLK_MM_MDP_RSZ0 6
+#define CLK_MM_MDP_RSZ1 7
+#define CLK_MM_MDP_RSZ2 8
+#define CLK_MM_MDP_TDSHP0 9
+#define CLK_MM_MDP_TDSHP1 10
+#define CLK_MM_MDP_WDMA 11
+#define CLK_MM_MDP_WROT0 12
+#define CLK_MM_MDP_WROT1 13
+#define CLK_MM_FAKE_ENG 14
+#define CLK_MM_MUTEX_32K 15
+#define CLK_MM_DISP_OVL0 16
+#define CLK_MM_DISP_OVL1 17
+#define CLK_MM_DISP_RDMA0 18
+#define CLK_MM_DISP_RDMA1 19
+#define CLK_MM_DISP_RDMA2 20
+#define CLK_MM_DISP_WDMA0 21
+#define CLK_MM_DISP_WDMA1 22
+#define CLK_MM_DISP_COLOR0 23
+#define CLK_MM_DISP_COLOR1 24
+#define CLK_MM_DISP_AAL 25
+#define CLK_MM_DISP_GAMMA 26
+#define CLK_MM_DISP_UFOE 27
+#define CLK_MM_DISP_SPLIT0 28
+#define CLK_MM_DISP_SPLIT1 29
+#define CLK_MM_DISP_MERGE 30
+#define CLK_MM_DISP_OD 31
+#define CLK_MM_DISP_PWM0MM 32
+#define CLK_MM_DISP_PWM026M 33
+#define CLK_MM_DISP_PWM1MM 34
+#define CLK_MM_DISP_PWM126M 35
+#define CLK_MM_DSI0_ENGINE 36
+#define CLK_MM_DSI0_DIGITAL 37
+#define CLK_MM_DSI1_ENGINE 38
+#define CLK_MM_DSI1_DIGITAL 39
+#define CLK_MM_DPI_PIXEL 40
+#define CLK_MM_DPI_ENGINE 41
+#define CLK_MM_DPI1_PIXEL 42
+#define CLK_MM_DPI1_ENGINE 43
+#define CLK_MM_HDMI_PIXEL 44
+#define CLK_MM_HDMI_PLLCK 45
+#define CLK_MM_HDMI_AUDIO 46
+#define CLK_MM_HDMI_SPDIF 47
+#define CLK_MM_LVDS_PIXEL 48
+#define CLK_MM_LVDS_CTS 49
+#define CLK_MM_SMI_LARB4 50
+#define CLK_MM_HDMI_HDCP 51
+#define CLK_MM_HDMI_HDCP24M 52
+#define CLK_MM_NR_CLK 53
+
+/* VDEC_SYS */
+
+#define CLK_VDEC_CKEN 1
+#define CLK_VDEC_LARB_CKEN 2
+#define CLK_VDEC_NR_CLK 3
+
+/* VENC_SYS */
+
+#define CLK_VENC_CKE0 1
+#define CLK_VENC_CKE1 2
+#define CLK_VENC_CKE2 3
+#define CLK_VENC_CKE3 4
+#define CLK_VENC_NR_CLK 5
+
+/* VENCLT_SYS */
+
+#define CLK_VENCLT_CKE0 1
+#define CLK_VENCLT_CKE1 2
+#define CLK_VENCLT_NR_CLK 3
+
#endif /* _DT_BINDINGS_CLK_MT8173_H */
--
1.8.1.1.dirty
Add REF2USB_TX clock support into MT8173 APMIXEDSYS. This clock
is needed by USB 3.0.
Signed-off-by: James Liao <[email protected]>
---
drivers/clk/mediatek/Makefile | 2 +-
drivers/clk/mediatek/clk-apmixed.c | 107 +++++++++++++++++++++++++++++++++
drivers/clk/mediatek/clk-mt8173.c | 47 +++++++++++++++
drivers/clk/mediatek/clk-mtk.h | 3 +
drivers/clk/mediatek/clk-pll.c | 7 +--
include/dt-bindings/clock/mt8173-clk.h | 3 +-
6 files changed, 161 insertions(+), 8 deletions(-)
create mode 100644 drivers/clk/mediatek/clk-apmixed.c
diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
index 8e4b2a4..95fdfac 100644
--- a/drivers/clk/mediatek/Makefile
+++ b/drivers/clk/mediatek/Makefile
@@ -1,4 +1,4 @@
-obj-y += clk-mtk.o clk-pll.o clk-gate.o
+obj-y += clk-mtk.o clk-pll.o clk-gate.o clk-apmixed.o
obj-$(CONFIG_RESET_CONTROLLER) += reset.o
obj-y += clk-mt8135.o
obj-y += clk-mt8173.o
diff --git a/drivers/clk/mediatek/clk-apmixed.c b/drivers/clk/mediatek/clk-apmixed.c
new file mode 100644
index 0000000..5303c59
--- /dev/null
+++ b/drivers/clk/mediatek/clk-apmixed.c
@@ -0,0 +1,107 @@
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: James Liao <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+
+#include "clk-mtk.h"
+
+#define REF2USB_TX_EN BIT(0)
+#define REF2USB_TX_LPF_EN BIT(1)
+#define REF2USB_TX_OUT_EN BIT(2)
+#define REF2USB_EN_MASK (REF2USB_TX_EN | REF2USB_TX_LPF_EN | \
+ REF2USB_TX_OUT_EN)
+
+struct mtk_ref2usb_tx {
+ struct clk_hw hw;
+ void __iomem *base_addr;
+};
+
+static inline struct mtk_ref2usb_tx *to_mtk_ref2usb_tx(struct clk_hw *hw)
+{
+ return container_of(hw, struct mtk_ref2usb_tx, hw);
+}
+
+static int mtk_ref2usb_tx_is_prepared(struct clk_hw *hw)
+{
+ struct mtk_ref2usb_tx *tx = to_mtk_ref2usb_tx(hw);
+
+ return (readl(tx->base_addr) & REF2USB_EN_MASK) == REF2USB_EN_MASK;
+}
+
+static int mtk_ref2usb_tx_prepare(struct clk_hw *hw)
+{
+ struct mtk_ref2usb_tx *tx = to_mtk_ref2usb_tx(hw);
+ u32 val;
+
+ val = readl(tx->base_addr);
+
+ val |= REF2USB_TX_EN;
+ writel(val, tx->base_addr);
+ udelay(100);
+
+ val |= REF2USB_TX_LPF_EN;
+ writel(val, tx->base_addr);
+
+ val |= REF2USB_TX_OUT_EN;
+ writel(val, tx->base_addr);
+
+ return 0;
+}
+
+static void mtk_ref2usb_tx_unprepare(struct clk_hw *hw)
+{
+ struct mtk_ref2usb_tx *tx = to_mtk_ref2usb_tx(hw);
+ u32 val;
+
+ val = readl(tx->base_addr);
+ val &= ~REF2USB_EN_MASK;
+ writel(val, tx->base_addr);
+}
+
+static const struct clk_ops mtk_ref2usb_tx_ops = {
+ .is_prepared = mtk_ref2usb_tx_is_prepared,
+ .prepare = mtk_ref2usb_tx_prepare,
+ .unprepare = mtk_ref2usb_tx_unprepare,
+};
+
+struct clk * __init mtk_clk_register_ref2usb_tx(const char *name,
+ const char *parent_name, void __iomem *reg)
+{
+ struct mtk_ref2usb_tx *tx;
+ struct clk_init_data init = {};
+ struct clk *clk;
+
+ tx = kzalloc(sizeof(*tx), GFP_KERNEL);
+ if (!tx)
+ return ERR_PTR(-ENOMEM);
+
+ tx->base_addr = reg;
+ tx->hw.init = &init;
+
+ init.name = name;
+ init.ops = &mtk_ref2usb_tx_ops;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ clk = clk_register(NULL, &tx->hw);
+
+ if (IS_ERR(clk)) {
+ pr_err("Failed to register clk %s: %ld\n", name, PTR_ERR(clk));
+ kfree(tx);
+ }
+
+ return clk;
+}
diff --git a/drivers/clk/mediatek/clk-mt8173.c b/drivers/clk/mediatek/clk-mt8173.c
index 14f61f1..2a12b74 100644
--- a/drivers/clk/mediatek/clk-mt8173.c
+++ b/drivers/clk/mediatek/clk-mt8173.c
@@ -976,6 +976,24 @@ static void __init mtk_pericfg_init(struct device_node *node)
}
CLK_OF_DECLARE(mtk_pericfg, "mediatek,mt8173-pericfg", mtk_pericfg_init);
+struct mtk_clk_usb {
+ int id;
+ const char *name;
+ const char *parent;
+ u32 reg_ofs;
+};
+
+#define APMIXED_USB(_id, _name, _parent, _reg_ofs) { \
+ .id = _id, \
+ .name = _name, \
+ .parent = _parent, \
+ .reg_ofs = _reg_ofs, \
+ }
+
+static const struct mtk_clk_usb apmixed_usb[] __initconst = {
+ APMIXED_USB(CLK_APMIXED_REF2USB_TX, "ref2usb_tx", "clk26m", 0x8),
+};
+
#define MT8173_PLL_FMAX (3000UL * MHZ)
#define CON0_MT8173_RST_BAR BIT(24)
@@ -1018,6 +1036,15 @@ static const struct mtk_pll_data plls[] = {
static void __init mtk_apmixedsys_init(struct device_node *node)
{
struct clk_onecell_data *clk_data;
+ void __iomem *base;
+ struct clk *clk;
+ int r, i;
+
+ base = of_iomap(node, 0);
+ if (!base) {
+ pr_err("%s(): ioremap failed\n", __func__);
+ return;
+ }
mt8173_pll_clk_data = clk_data = mtk_alloc_clk_data(CLK_APMIXED_NR_CLK);
if (!clk_data)
@@ -1025,6 +1052,26 @@ static void __init mtk_apmixedsys_init(struct device_node *node)
mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls), clk_data);
+ for (i = 0; i < ARRAY_SIZE(apmixed_usb); i++) {
+ const struct mtk_clk_usb *cku = &apmixed_usb[i];
+
+ clk = mtk_clk_register_ref2usb_tx(cku->name, cku->parent,
+ base + cku->reg_ofs);
+
+ if (IS_ERR(clk)) {
+ pr_err("Failed to register clk %s: %ld\n", cku->name,
+ PTR_ERR(clk));
+ continue;
+ }
+
+ clk_data->clks[cku->id] = clk;
+ }
+
+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+ if (r)
+ pr_err("%s(): could not register clock provider: %d\n",
+ __func__, r);
+
mtk_clk_enable_critical();
}
CLK_OF_DECLARE(mtk_apmixedsys, "mediatek,mt8173-apmixedsys",
diff --git a/drivers/clk/mediatek/clk-mtk.h b/drivers/clk/mediatek/clk-mtk.h
index 32d4f55..cf19363 100644
--- a/drivers/clk/mediatek/clk-mtk.h
+++ b/drivers/clk/mediatek/clk-mtk.h
@@ -173,6 +173,9 @@ void mtk_clk_register_plls(struct device_node *node,
const struct mtk_pll_data *plls, int num_plls,
struct clk_onecell_data *clk_data);
+struct clk *mtk_clk_register_ref2usb_tx(const char *name,
+ const char *parent_name, void __iomem *reg);
+
#ifdef CONFIG_RESET_CONTROLLER
void mtk_register_reset_controller(struct device_node *np,
unsigned int num_regs, int regofs);
diff --git a/drivers/clk/mediatek/clk-pll.c b/drivers/clk/mediatek/clk-pll.c
index 44409e9..813f0c7 100644
--- a/drivers/clk/mediatek/clk-pll.c
+++ b/drivers/clk/mediatek/clk-pll.c
@@ -302,7 +302,7 @@ void __init mtk_clk_register_plls(struct device_node *node,
const struct mtk_pll_data *plls, int num_plls, struct clk_onecell_data *clk_data)
{
void __iomem *base;
- int r, i;
+ int i;
struct clk *clk;
base = of_iomap(node, 0);
@@ -324,9 +324,4 @@ void __init mtk_clk_register_plls(struct device_node *node,
clk_data->clks[pll->id] = clk;
}
-
- r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
- if (r)
- pr_err("%s(): could not register clock provider: %d\n",
- __func__, r);
}
diff --git a/include/dt-bindings/clock/mt8173-clk.h b/include/dt-bindings/clock/mt8173-clk.h
index 87820ee..e3db63a 100644
--- a/include/dt-bindings/clock/mt8173-clk.h
+++ b/include/dt-bindings/clock/mt8173-clk.h
@@ -175,7 +175,8 @@
#define CLK_APMIXED_APLL2 12
#define CLK_APMIXED_LVDSPLL 13
#define CLK_APMIXED_MSDCPLL2 14
-#define CLK_APMIXED_NR_CLK 15
+#define CLK_APMIXED_REF2USB_TX 15
+#define CLK_APMIXED_NR_CLK 16
/* INFRA_SYS */
--
1.8.1.1.dirty
This patch adds device nodes providing subsystem clocks on MT8173,
includes mmsys, imgsys, vdecsys, vencsys and vencltsys.
Signed-off-by: James Liao <[email protected]>
---
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 37 ++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index a2f63e4..32c85cc 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -102,6 +102,13 @@
clock-output-names = "clk32k";
};
+ cpum_ck: oscillator@2 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "cpum_ck";
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupt-parent = <&gic>;
@@ -227,6 +234,36 @@
clocks = <&uart_clk>;
status = "disabled";
};
+
+ mmsys: clock-controller@14000000 {
+ compatible = "mediatek,mt8173-mmsys", "syscon";
+ reg = <0 0x14000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ imgsys: clock-controller@15000000 {
+ compatible = "mediatek,mt8173-imgsys", "syscon";
+ reg = <0 0x15000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ vdecsys: clock-controller@16000000 {
+ compatible = "mediatek,mt8173-vdecsys", "syscon";
+ reg = <0 0x16000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ vencsys: clock-controller@18000000 {
+ compatible = "mediatek,mt8173-vencsys", "syscon";
+ reg = <0 0x18000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ vencltsys: clock-controller@19000000 {
+ compatible = "mediatek,mt8173-vencltsys", "syscon";
+ reg = <0 0x19000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
};
};
--
1.8.1.1.dirty
Hi James,
On Mon, Aug 10, 2015 at 5:50 PM, James Liao <[email protected]> wrote:
> This patchset is based on 4.2-rc2 and [1], and contains minor fixes and
> subsystem clocks support for Mediatek MT8173.
>
> The previous reviews can be found in [2].
>
> changes since v6:
> - Use DUMMY_RATE (0) instead of typical rate for clocks that we don't care
> and not controlled in CCF.
For the whole series:
Reviewed-by: Daniel Kurtz <[email protected]>
>
> changes since v5:
> - Rebase to 4.2-rc2.
> - Patch "Fix enabling of critical clocks" had been included in 4.2-rc2,
> so it need not be included in this patchset.
>
> changes since v4:
> - Add a separated patch to remove unused dpi_ck.
> - Add separated patches to fix clk/mediatek in release 4.2-rc1.
> - Add __init* for initialization data and functions.
> - Rename dummy_clk with oscillator in DT.
> - Remove mtk_clk_register_apmixed_ex(), call mtk_clk_register_ref2usb_tx()
> directly to register USB clock.
>
> changes since v3:
> - Remove clk_null dependency from root clocks.
> - Use fixed-rate clocks with typical rate to replace clk_null.
> - Separate ref2usb_tx implementation to clk-apmixed.c
> - Use clock-controller as the name of clock providers.
>
> changes since v2:
> - Rebase to 4.2-rc1.
> - Add device tree nodes for subsystem clocks.
> - Fine tune comments of patches.
> - Add __init, __initconst and const to init data and functions.
> - Removed unused code from init functions of subsystem clocks.
>
> changes since v1:
> - Add CA7PLL and CA15PLL as critical clocks.
> - Use the same register descriptor for imgsys, vensys and vencltsys.
> - Generalize apmixedsys special clocks registration.
>
> [1] https://patchwork.kernel.org/patch/6446341/
> [2] https://lkml.org/lkml/2015/8/4/111
>
> James Liao (9):
> clk: mediatek: Removed unused dpi_ck clock from MT8173
> clk: mediatek: Remove unused code from MT8173.
> clk: mediatek: Add __initdata and __init for data and functions
> clk: mediatek: Add fixed clocks support for Mediatek SoC.
> clk: mediatek: Fix rate and dependency of MT8173 clocks
> dt-bindings: ARM: Mediatek: Document devicetree bindings for clock
> controllers
> clk: mediatek: Add subsystem clocks of MT8173
> clk: mediatek: Add USB clock support in MT8173 APMIXEDSYS
> arm64: dts: mt8173: Add subsystem clock controller device nodes
>
> .../bindings/arm/mediatek/mediatek,imgsys.txt | 22 ++
> .../bindings/arm/mediatek/mediatek,mmsys.txt | 22 ++
> .../bindings/arm/mediatek/mediatek,vdecsys.txt | 22 ++
> .../bindings/arm/mediatek/mediatek,vencltsys.txt | 22 ++
> .../bindings/arm/mediatek/mediatek,vencsys.txt | 22 ++
> arch/arm64/boot/dts/mediatek/mt8173.dtsi | 37 +++
> drivers/clk/mediatek/Makefile | 2 +-
> drivers/clk/mediatek/clk-apmixed.c | 107 +++++++
> drivers/clk/mediatek/clk-gate.c | 2 +-
> drivers/clk/mediatek/clk-mt8173.c | 342 ++++++++++++++++++++-
> drivers/clk/mediatek/clk-mtk.c | 36 ++-
> drivers/clk/mediatek/clk-mtk.h | 24 +-
> drivers/clk/mediatek/clk-pll.c | 7 +-
> include/dt-bindings/clock/mt8173-clk.h | 101 +++++-
> 14 files changed, 735 insertions(+), 33 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt
> create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt
> create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt
> create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,vencltsys.txt
> create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt
> create mode 100644 drivers/clk/mediatek/clk-apmixed.c
>
> --
> 1.8.1.1.dirty
>
On Tue, Aug 11, 2015 at 12:43 PM, Daniel Kurtz <[email protected]> wrote:
> Hi James,
>
> On Mon, Aug 10, 2015 at 5:50 PM, James Liao <[email protected]> wrote:
>> This patchset is based on 4.2-rc2 and [1], and contains minor fixes and
>> subsystem clocks support for Mediatek MT8173.
>>
>> The previous reviews can be found in [2].
>>
>> changes since v6:
>> - Use DUMMY_RATE (0) instead of typical rate for clocks that we don't care
>> and not controlled in CCF.
>
> For the whole series:
> Reviewed-by: Daniel Kurtz <[email protected]>
Hi Sascha,
Are you happy with these patches now?
Thanks,
-Dan
Hi Dan,
On Fri, Aug 14, 2015 at 12:01:06PM +0800, Daniel Kurtz wrote:
> On Tue, Aug 11, 2015 at 12:43 PM, Daniel Kurtz <[email protected]> wrote:
> > Hi James,
> >
> > On Mon, Aug 10, 2015 at 5:50 PM, James Liao <[email protected]> wrote:
> >> This patchset is based on 4.2-rc2 and [1], and contains minor fixes and
> >> subsystem clocks support for Mediatek MT8173.
> >>
> >> The previous reviews can be found in [2].
> >>
> >> changes since v6:
> >> - Use DUMMY_RATE (0) instead of typical rate for clocks that we don't care
> >> and not controlled in CCF.
> >
> > For the whole series:
> > Reviewed-by: Daniel Kurtz <[email protected]>
>
> Hi Sascha,
>
> Are you happy with these patches now?
Yes.
Acked-by: Sascha Hauer <[email protected]>
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |