These allow describing all the Aspeed VUART attributes currently
available via sysfs. aspeed,lpc-interrupts provides a replacement for
the deprecated aspeed,sirq-polarity-sense property.
Signed-off-by: Zev Weiss <[email protected]>
---
drivers/tty/serial/8250/8250_aspeed_vuart.c | 51 ++++++++++++++++++++-
1 file changed, 49 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c
index 8433f8dbb186..3c239d98747f 100644
--- a/drivers/tty/serial/8250/8250_aspeed_vuart.c
+++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
@@ -28,6 +28,10 @@
#define ASPEED_VUART_ADDRL 0x28
#define ASPEED_VUART_ADDRH 0x2c
+#define ASPEED_VUART_DEFAULT_LPC_ADDR 0x3f8
+#define ASPEED_VUART_DEFAULT_SIRQ 4
+#define ASPEED_VUART_DEFAULT_SIRQ_POLARITY IRQ_TYPE_LEVEL_LOW
+
struct aspeed_vuart {
struct device *dev;
void __iomem *regs;
@@ -386,6 +390,18 @@ static void aspeed_vuart_auto_configure_sirq_polarity(
aspeed_vuart_set_sirq_polarity(vuart, (value & reg_mask) == 0);
}
+static int aspeed_vuart_map_irq_polarity(u32 dt)
+{
+ switch (dt) {
+ case IRQ_TYPE_LEVEL_LOW:
+ return 0;
+ case IRQ_TYPE_LEVEL_HIGH:
+ return 1;
+ default:
+ return -EINVAL;
+ }
+}
+
static int aspeed_vuart_probe(struct platform_device *pdev)
{
struct of_phandle_args sirq_polarity_sense_args;
@@ -393,8 +409,8 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
struct aspeed_vuart *vuart;
struct device_node *np;
struct resource *res;
- u32 clk, prop;
- int rc;
+ u32 clk, prop, sirq[2];
+ int rc, sirq_polarity;
np = pdev->dev.of_node;
@@ -501,6 +517,37 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
of_node_put(sirq_polarity_sense_args.np);
}
+ rc = of_property_read_u32(np, "aspeed,lpc-io-reg", &prop);
+ if (rc < 0)
+ prop = ASPEED_VUART_DEFAULT_LPC_ADDR;
+
+ rc = aspeed_vuart_set_lpc_address(vuart, prop);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "invalid value in aspeed,lpc-io-reg property\n");
+ goto err_clk_disable;
+ }
+
+ rc = of_property_read_u32_array(np, "aspeed,lpc-interrupts", sirq, 2);
+ if (rc < 0) {
+ sirq[0] = ASPEED_VUART_DEFAULT_SIRQ;
+ sirq[1] = ASPEED_VUART_DEFAULT_SIRQ_POLARITY;
+ }
+
+ rc = aspeed_vuart_set_sirq(vuart, sirq[0]);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "invalid sirq number in aspeed,lpc-interrupts property\n");
+ goto err_clk_disable;
+ }
+
+ sirq_polarity = aspeed_vuart_map_irq_polarity(sirq[1]);
+ if (sirq_polarity < 0) {
+ dev_err(&pdev->dev, "invalid sirq polarity in aspeed,lpc-interrupts property\n");
+ rc = sirq_polarity;
+ goto err_clk_disable;
+ }
+
+ aspeed_vuart_set_sirq_polarity(vuart, sirq_polarity);
+
aspeed_vuart_set_enabled(vuart, true);
aspeed_vuart_set_host_tx_discard(vuart, true);
platform_set_drvdata(pdev, vuart);
--
2.31.1
On Mon, 12 Apr 2021, at 13:17, Zev Weiss wrote:
> These allow describing all the Aspeed VUART attributes currently
> available via sysfs. aspeed,lpc-interrupts provides a replacement for
> the deprecated aspeed,sirq-polarity-sense property.
>
> Signed-off-by: Zev Weiss <[email protected]>
Reviewed-by: Andrew Jeffery <[email protected]>
On Mon, Apr 12, 2021 at 7:05 AM Zev Weiss <[email protected]> wrote:
>
> These allow describing all the Aspeed VUART attributes currently
> available via sysfs. aspeed,lpc-interrupts provides a replacement for
> the deprecated aspeed,sirq-polarity-sense property.
One nit-pick below.
In any case it's fine.
> Signed-off-by: Zev Weiss <[email protected]>
> ---
> drivers/tty/serial/8250/8250_aspeed_vuart.c | 51 ++++++++++++++++++++-
> 1 file changed, 49 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c
> index 8433f8dbb186..3c239d98747f 100644
> --- a/drivers/tty/serial/8250/8250_aspeed_vuart.c
> +++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
> @@ -28,6 +28,10 @@
> #define ASPEED_VUART_ADDRL 0x28
> #define ASPEED_VUART_ADDRH 0x2c
>
> +#define ASPEED_VUART_DEFAULT_LPC_ADDR 0x3f8
> +#define ASPEED_VUART_DEFAULT_SIRQ 4
> +#define ASPEED_VUART_DEFAULT_SIRQ_POLARITY IRQ_TYPE_LEVEL_LOW
> +
> struct aspeed_vuart {
> struct device *dev;
> void __iomem *regs;
> @@ -386,6 +390,18 @@ static void aspeed_vuart_auto_configure_sirq_polarity(
> aspeed_vuart_set_sirq_polarity(vuart, (value & reg_mask) == 0);
> }
>
> +static int aspeed_vuart_map_irq_polarity(u32 dt)
> +{
> + switch (dt) {
> + case IRQ_TYPE_LEVEL_LOW:
> + return 0;
> + case IRQ_TYPE_LEVEL_HIGH:
> + return 1;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> static int aspeed_vuart_probe(struct platform_device *pdev)
> {
> struct of_phandle_args sirq_polarity_sense_args;
> @@ -393,8 +409,8 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
> struct aspeed_vuart *vuart;
> struct device_node *np;
> struct resource *res;
> - u32 clk, prop;
> - int rc;
> + u32 clk, prop, sirq[2];
> + int rc, sirq_polarity;
>
> np = pdev->dev.of_node;
>
> @@ -501,6 +517,37 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
> of_node_put(sirq_polarity_sense_args.np);
> }
>
> + rc = of_property_read_u32(np, "aspeed,lpc-io-reg", &prop);
> + if (rc < 0)
> + prop = ASPEED_VUART_DEFAULT_LPC_ADDR;
> +
> + rc = aspeed_vuart_set_lpc_address(vuart, prop);
> + if (rc < 0) {
> + dev_err(&pdev->dev, "invalid value in aspeed,lpc-io-reg property\n");
> + goto err_clk_disable;
> + }
> +
> + rc = of_property_read_u32_array(np, "aspeed,lpc-interrupts", sirq, 2);
> + if (rc < 0) {
> + sirq[0] = ASPEED_VUART_DEFAULT_SIRQ;
> + sirq[1] = ASPEED_VUART_DEFAULT_SIRQ_POLARITY;
> + }
> +
> + rc = aspeed_vuart_set_sirq(vuart, sirq[0]);
> + if (rc < 0) {
> + dev_err(&pdev->dev, "invalid sirq number in aspeed,lpc-interrupts property\n");
> + goto err_clk_disable;
> + }
> +
> + sirq_polarity = aspeed_vuart_map_irq_polarity(sirq[1]);
> + if (sirq_polarity < 0) {
> + dev_err(&pdev->dev, "invalid sirq polarity in aspeed,lpc-interrupts property\n");
> + rc = sirq_polarity;
> + goto err_clk_disable;
> + }
Why not to use the same pattern as above, i.e.
rc = aspeed_vuart_map_irq_polarity(sirq[1]);
if (rc < 0) {
dev_err(&pdev->dev, "invalid sirq polarity in
aspeed,lpc-interrupts property\n");
goto err_clk_disable;
}
sirq_polarity = rc;
?
> + aspeed_vuart_set_sirq_polarity(vuart, sirq_polarity);
> +
> aspeed_vuart_set_enabled(vuart, true);
> aspeed_vuart_set_host_tx_discard(vuart, true);
> platform_set_drvdata(pdev, vuart);
--
With Best Regards,
Andy Shevchenko