On Fri, 21 May 2021 at 12:06, Greg Kurz <[email protected]> wrote:
>
> On Fri, 21 May 2021 10:50:34 +0200
> Miklos Szeredi <[email protected]> wrote:
>
> > On Fri, 21 May 2021 at 10:39, Greg Kurz <[email protected]> wrote:
> > >
> > > On Fri, 21 May 2021 10:26:27 +0200
> > > Miklos Szeredi <[email protected]> wrote:
> > >
> > > > On Thu, 20 May 2021 at 17:47, Greg Kurz <[email protected]> wrote:
> > > > >
> > > > > All submounts share the same virtio-fs device instance as the root
> > > > > mount. If the same virtiofs filesystem is mounted again, sget_fc()
> > > > > is likely to pick up any of these submounts and reuse it instead of
> > > > > the root mount.
> > > > >
> > > > > On the server side:
> > > > >
> > > > > # mkdir ${some_dir}
> > > > > # mkdir ${some_dir}/mnt1
> > > > > # mount -t tmpfs none ${some_dir}/mnt1
> > > > > # touch ${some_dir}/mnt1/THIS_IS_MNT1
> > > > > # mkdir ${some_dir}/mnt2
> > > > > # mount -t tmpfs none ${some_dir}/mnt2
> > > > > # touch ${some_dir}/mnt2/THIS_IS_MNT2
> > > > >
> > > > > On the client side:
> > > > >
> > > > > # mkdir /mnt/virtiofs1
> > > > > # mount -t virtiofs myfs /mnt/virtiofs1
> > > > > # ls /mnt/virtiofs1
> > > > > mnt1 mnt2
> > > > > # grep virtiofs /proc/mounts
> > > > > myfs /mnt/virtiofs1 virtiofs rw,seclabel,relatime 0 0
> > > > > none on /mnt/mnt1 type virtiofs (rw,relatime,seclabel)
> > > > > none on /mnt/mnt2 type virtiofs (rw,relatime,seclabel)
> > > > >
> > > > > And now remount it again:
> > > > >
> > > > > # mount -t virtiofs myfs /mnt/virtiofs2
> > > > > # grep virtiofs /proc/mounts
> > > > > myfs /mnt/virtiofs1 virtiofs rw,seclabel,relatime 0 0
> > > > > none on /mnt/mnt1 type virtiofs (rw,relatime,seclabel)
> > > > > none on /mnt/mnt2 type virtiofs (rw,relatime,seclabel)
> > > > > myfs /mnt/virtiofs2 virtiofs rw,seclabel,relatime 0 0
> > > > > # ls /mnt/virtiofs2
> > > > > THIS_IS_MNT2
> > > > >
> > > > > Submount mnt2 was picked-up instead of the root mount.
> > > >
> > >
> > > > Why is this a problem?
> > > >
> > >
> > > It seems very weird to mount the same filesystem again
> > > and to end up in one of its submounts. We should have:
> > >
> > > # ls /mnt/virtiofs2
> > > mnt1 mnt2
> >
> > Okay, sorry, I understand the problem. The solution is wrong,
> > however: the position of the submount on that list is no indication
> > that it's the right one (it's possible that the root sb will go away
> > and only a sub-sb will remain).
> >
>
> Ah... I had myself convinced this could not happen, i.e. you can't
> unmount a parent sb with a sub-sb still mounted.
No, but it's possible for sub-sb to continue existing after it's no
longer a submount of original mount.
>
> How can this happen ?
E.g. move the submount out of the way, then unmount the parent, or
detach submount (umount -l) while keeping something open in there and
umount the parent.
> > Even just setting a flag in the root, indicating that it's the root
> > isn't fully going to solve the problem.
> >
> > Here's issue in full:
> >
> > case 1: no connection for "myfs" exists
> > - need to create fuse_conn, sb
> >
> > case 2: connection for "myfs" exists but only sb for submount
>
> How would we know this sb isn't a root sb ?
>
> > - only create sb for root, reuse fuse_conn
> >
> > case 3: connection for "myfs" as well as root sb exists
> > - reuse sb
> >
> > I'll think about how to fix this properly, it's probably going to be
> > rather more involved...
> >
>
> Sure. BTW I'm wondering why we never reuse sbs for submounts ?
Right, same general issue.
An sb can be identified by its root nodeid, so I guess the proper fix
to make the root nodeid be the key for virtio_fs_test_super().
Thanks,
Miklos
On Fri, 21 May 2021 14:37:25 +0200
Miklos Szeredi <[email protected]> wrote:
> On Fri, 21 May 2021 at 12:06, Greg Kurz <[email protected]> wrote:
> >
> > On Fri, 21 May 2021 10:50:34 +0200
> > Miklos Szeredi <[email protected]> wrote:
> >
> > > On Fri, 21 May 2021 at 10:39, Greg Kurz <[email protected]> wrote:
> > > >
> > > > On Fri, 21 May 2021 10:26:27 +0200
> > > > Miklos Szeredi <[email protected]> wrote:
> > > >
> > > > > On Thu, 20 May 2021 at 17:47, Greg Kurz <[email protected]> wrote:
> > > > > >
> > > > > > All submounts share the same virtio-fs device instance as the root
> > > > > > mount. If the same virtiofs filesystem is mounted again, sget_fc()
> > > > > > is likely to pick up any of these submounts and reuse it instead of
> > > > > > the root mount.
> > > > > >
> > > > > > On the server side:
> > > > > >
> > > > > > # mkdir ${some_dir}
> > > > > > # mkdir ${some_dir}/mnt1
> > > > > > # mount -t tmpfs none ${some_dir}/mnt1
> > > > > > # touch ${some_dir}/mnt1/THIS_IS_MNT1
> > > > > > # mkdir ${some_dir}/mnt2
> > > > > > # mount -t tmpfs none ${some_dir}/mnt2
> > > > > > # touch ${some_dir}/mnt2/THIS_IS_MNT2
> > > > > >
> > > > > > On the client side:
> > > > > >
> > > > > > # mkdir /mnt/virtiofs1
> > > > > > # mount -t virtiofs myfs /mnt/virtiofs1
> > > > > > # ls /mnt/virtiofs1
> > > > > > mnt1 mnt2
> > > > > > # grep virtiofs /proc/mounts
> > > > > > myfs /mnt/virtiofs1 virtiofs rw,seclabel,relatime 0 0
> > > > > > none on /mnt/mnt1 type virtiofs (rw,relatime,seclabel)
> > > > > > none on /mnt/mnt2 type virtiofs (rw,relatime,seclabel)
> > > > > >
> > > > > > And now remount it again:
> > > > > >
> > > > > > # mount -t virtiofs myfs /mnt/virtiofs2
> > > > > > # grep virtiofs /proc/mounts
> > > > > > myfs /mnt/virtiofs1 virtiofs rw,seclabel,relatime 0 0
> > > > > > none on /mnt/mnt1 type virtiofs (rw,relatime,seclabel)
> > > > > > none on /mnt/mnt2 type virtiofs (rw,relatime,seclabel)
> > > > > > myfs /mnt/virtiofs2 virtiofs rw,seclabel,relatime 0 0
> > > > > > # ls /mnt/virtiofs2
> > > > > > THIS_IS_MNT2
> > > > > >
> > > > > > Submount mnt2 was picked-up instead of the root mount.
> > > > >
> > > >
> > > > > Why is this a problem?
> > > > >
> > > >
> > > > It seems very weird to mount the same filesystem again
> > > > and to end up in one of its submounts. We should have:
> > > >
> > > > # ls /mnt/virtiofs2
> > > > mnt1 mnt2
> > >
> > > Okay, sorry, I understand the problem. The solution is wrong,
> > > however: the position of the submount on that list is no indication
> > > that it's the right one (it's possible that the root sb will go away
> > > and only a sub-sb will remain).
> > >
> >
> > Ah... I had myself convinced this could not happen, i.e. you can't
> > unmount a parent sb with a sub-sb still mounted.
>
> No, but it's possible for sub-sb to continue existing after it's no
> longer a submount of original mount.
> >
> > How can this happen ?
>
> E.g. move the submount out of the way, then unmount the parent, or
> detach submount (umount -l) while keeping something open in there and
> umount the parent.
>
Ok, I get it now. Thanks for the clarification.
> > > Even just setting a flag in the root, indicating that it's the root
> > > isn't fully going to solve the problem.
> > >
> > > Here's issue in full:
> > >
> > > case 1: no connection for "myfs" exists
> > > - need to create fuse_conn, sb
> > >
> > > case 2: connection for "myfs" exists but only sb for submount
> >
> > How would we know this sb isn't a root sb ?
> >
> > > - only create sb for root, reuse fuse_conn
> > >
> > > case 3: connection for "myfs" as well as root sb exists
> > > - reuse sb
> > >
> > > I'll think about how to fix this properly, it's probably going to be
> > > rather more involved...
> > >
> >
> > Sure. BTW I'm wondering why we never reuse sbs for submounts ?
>
> Right, same general issue.
>
> An sb can be identified by its root nodeid, so I guess the proper fix
> to make the root nodeid be the key for virtio_fs_test_super().
>
Cool, I was thinking about doing this exactly. :)
> Thanks,
> Miklos