Hello,
Small series to convert some of the board files in the mach-pxa directory
to use the new GPIO descriptor interface.
Most notably, the am200epd, am300epd and Spitz matrix keypad among
others are not converted in this series.
Signed-off-by: Duje Mihanović <[email protected]>
---
Changes in v8:
- Address maintainer comments:
- Do not pointlessly gpiod_get() LED gpios
- Update trailers
- Rebase on v6.6-rc5
- Link to v7: https://lore.kernel.org/r/[email protected]
Changes in v7:
- Address maintainer comments:
- Drop gpiod_put in OHCI
- Make "struct gpio_descs *leds" in Spitz LEDs global
- Link to v6: https://lore.kernel.org/r/[email protected]
Changes in v6:
- Address maintainer comments:
- Use devm_gpiod_get_optional() in OHCI
- Use gpiod_get_array() in Spitz LEDs
- Update trailers
- Link to v5: https://lore.kernel.org/r/[email protected]
Changes in v5:
- Address maintainer comments:
- Rename "reset generator" GPIO to "reset"
- Rename ads7846_wait_for_sync() to ads7846_wait_for_sync_gpio()
- Properly bail out when requesting USB host GPIO fails
- Use dev_err_probe() when requesting touchscreen sync GPIO fails
- Use static gpio_desc for gumstix bluetooth reset
- Pulse gumstix bluetooth reset line correctly (assert, then deassert)
- Fix style issue in ads7846_wait_for_sync_gpio()
- Update trailers
- Link to v4: https://lore.kernel.org/r/[email protected]
Changes in v4:
- Address maintainer comments:
- Move wait_for_sync() from spitz.c to driver
- Register LED platform device before getting its gpiod-s
- Add Linus' Reviewed-by
- Link to v3: https://lore.kernel.org/r/[email protected]
Changes in v3:
- Address maintainer comments:
- Use GPIO_LOOKUP_IDX for LEDs
- Drop unnecessary NULL assignments
- Don't give up on *all* SPI devices if hsync cannot be set up
- Add Linus' Acked-by
- Link to v2: https://lore.kernel.org/r/[email protected]
Changes in v2:
- Address maintainer comments:
- Change mentions of function to function()
- Drop cast in OHCI driver dev_warn() call
- Use %pe in OHCI and reset drivers
- Use GPIO _optional() API in OHCI driver
- Drop unnecessary not-null check in OHCI driver
- Use pr_err() instead of printk() in reset driver
- Rebase on v6.6-rc3
- Link to v1: https://lore.kernel.org/r/[email protected]
---
Duje Mihanović (6):
ARM: pxa: Convert Spitz OHCI to GPIO descriptors
ARM: pxa: Convert Spitz LEDs to GPIO descriptors
ARM: pxa: Convert Spitz CF power control to GPIO descriptors
ARM: pxa: Convert reset driver to GPIO descriptors
ARM: pxa: Convert gumstix Bluetooth to GPIO descriptors
input: ads7846: Move wait_for_sync() logic to driver
arch/arm/mach-pxa/gumstix.c | 22 ++++++-------
arch/arm/mach-pxa/reset.c | 39 ++++++++--------------
arch/arm/mach-pxa/reset.h | 3 +-
arch/arm/mach-pxa/spitz.c | 65 ++++++++++++++++++++++++-------------
drivers/input/touchscreen/ads7846.c | 22 +++++++++----
drivers/usb/host/ohci-pxa27x.c | 5 +++
include/linux/spi/ads7846.h | 1 -
7 files changed, 88 insertions(+), 69 deletions(-)
---
base-commit: 94f6f0550c625fab1f373bb86a6669b45e9748b3
change-id: 20230807-pxa-gpio-3ce25d574814
Best regards,
--
Duje Mihanović <[email protected]>
If this code is left in the board file, the sync GPIO would have to be
separated into another lookup table during conversion to the GPIO
descriptor API (which is also done in this patch).
The only user of this code (Sharp Spitz) is also converted in this
patch.
Suggested-by: Linus Walleij <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Acked-by: Mark Brown <[email protected]>
Reviewed-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Duje Mihanović <[email protected]>
---
arch/arm/mach-pxa/spitz.c | 12 ++----------
drivers/input/touchscreen/ads7846.c | 22 +++++++++++++++-------
include/linux/spi/ads7846.h | 1 -
3 files changed, 17 insertions(+), 18 deletions(-)
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index acb2b5495dbe..e086a13950d2 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -516,22 +516,12 @@ static inline void spitz_leds_init(void) {}
* SSP Devices
******************************************************************************/
#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-static void spitz_ads7846_wait_for_hsync(void)
-{
- while (gpio_get_value(SPITZ_GPIO_HSYNC))
- cpu_relax();
-
- while (!gpio_get_value(SPITZ_GPIO_HSYNC))
- cpu_relax();
-}
-
static struct ads7846_platform_data spitz_ads7846_info = {
.model = 7846,
.vref_delay_usecs = 100,
.x_plate_ohms = 419,
.y_plate_ohms = 486,
.pressure_max = 1024,
- .wait_for_sync = spitz_ads7846_wait_for_hsync,
};
static struct gpiod_lookup_table spitz_ads7846_gpio_table = {
@@ -539,6 +529,8 @@ static struct gpiod_lookup_table spitz_ads7846_gpio_table = {
.table = {
GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_TP_INT,
"pendown", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_HSYNC,
+ "sync", GPIO_ACTIVE_LOW),
{ }
},
};
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index faea40dd66d0..139b0f3735d0 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -138,8 +138,7 @@ struct ads7846 {
void *filter_data;
int (*get_pendown_state)(void);
struct gpio_desc *gpio_pendown;
-
- void (*wait_for_sync)(void);
+ struct gpio_desc *sync;
};
enum ads7846_filter {
@@ -636,9 +635,15 @@ static const struct attribute_group ads784x_attr_group = {
};
/*--------------------------------------------------------------------------*/
-
-static void null_wait_for_sync(void)
+static void ads7846_wait_for_sync_gpio(struct ads7846 *ts)
{
+ if (!ts->sync)
+ return;
+ while (!gpiod_get_value(ts->sync))
+ cpu_relax();
+
+ while (gpiod_get_value(ts->sync))
+ cpu_relax();
}
static int ads7846_debounce_filter(void *ads, int data_idx, int *val)
@@ -803,7 +808,7 @@ static void ads7846_read_state(struct ads7846 *ts)
packet->last_cmd_idx = 0;
while (true) {
- ts->wait_for_sync();
+ ads7846_wait_for_sync_gpio(ts);
m = &ts->msg[msg_idx];
error = spi_sync(ts->spi, m);
@@ -1261,8 +1266,6 @@ static int ads7846_probe(struct spi_device *spi)
ts->penirq_recheck_delay_usecs =
pdata->penirq_recheck_delay_usecs;
- ts->wait_for_sync = pdata->wait_for_sync ? : null_wait_for_sync;
-
snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev));
snprintf(ts->name, sizeof(ts->name), "ADS%d Touchscreen", ts->model);
@@ -1361,6 +1364,11 @@ static int ads7846_probe(struct spi_device *spi)
if (err)
return err;
+ ts->sync = devm_gpiod_get_optional(dev, "sync", GPIOD_IN);
+ if (IS_ERR(ts->sync))
+ return dev_err_probe(dev, PTR_ERR(ts->sync),
+ "Failed to get sync GPIO");
+
err = input_register_device(input_dev);
if (err)
return err;
diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h
index a04c1c34c344..fa7c4f119023 100644
--- a/include/linux/spi/ads7846.h
+++ b/include/linux/spi/ads7846.h
@@ -38,7 +38,6 @@ struct ads7846_platform_data {
int gpio_pendown_debounce; /* platform specific debounce time for
* the gpio_pendown */
int (*get_pendown_state)(void);
- void (*wait_for_sync)(void);
bool wakeup;
unsigned long irq_flags;
};
--
2.42.0
Sharp's Spitz board still uses the legacy GPIO interface for configuring
its two onboard LEDs.
Convert them to use the GPIO descriptor interface.
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Duje Mihanović <[email protected]>
---
arch/arm/mach-pxa/spitz.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 535e2b2e997b..9efd603c715a 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -452,16 +452,25 @@ static inline void spitz_keys_init(void) {}
* LEDs
******************************************************************************/
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpiod_lookup_table spitz_led_gpio_table = {
+ .dev_id = "leds-gpio",
+ .table = {
+ GPIO_LOOKUP_IDX("pxa-gpio", SPITZ_GPIO_LED_ORANGE, NULL, 0,
+ GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX("pxa-gpio", SPITZ_GPIO_LED_GREEN, NULL, 1,
+ GPIO_ACTIVE_HIGH),
+ { }
+ }
+};
+
static struct gpio_led spitz_gpio_leds[] = {
{
.name = "spitz:amber:charge",
.default_trigger = "sharpsl-charge",
- .gpio = SPITZ_GPIO_LED_ORANGE,
},
{
.name = "spitz:green:hddactivity",
.default_trigger = "disk-activity",
- .gpio = SPITZ_GPIO_LED_GREEN,
},
};
@@ -480,6 +489,7 @@ static struct platform_device spitz_led_device = {
static void __init spitz_leds_init(void)
{
+ gpiod_add_lookup_table(&spitz_led_gpio_table);
platform_device_register(&spitz_led_device);
}
#else
--
2.42.0
The PXA reset driver still uses the legacy GPIO interface for
configuring and asserting the reset pin.
Convert it to use the GPIO descriptor interface.
Acked-by: Linus Walleij <[email protected]>
Reviewed-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Duje Mihanović <[email protected]>
---
arch/arm/mach-pxa/reset.c | 39 +++++++++++++--------------------------
arch/arm/mach-pxa/reset.h | 3 +--
arch/arm/mach-pxa/spitz.c | 6 +++++-
3 files changed, 19 insertions(+), 29 deletions(-)
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
index 27293549f8ad..08bc104b9411 100644
--- a/arch/arm/mach-pxa/reset.c
+++ b/arch/arm/mach-pxa/reset.c
@@ -2,7 +2,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/io.h>
#include <asm/proc-fns.h>
#include <asm/system_misc.h>
@@ -14,33 +14,20 @@
static void do_hw_reset(void);
-static int reset_gpio = -1;
+static struct gpio_desc *reset_gpio;
-int init_gpio_reset(int gpio, int output, int level)
+int init_gpio_reset(int output, int level)
{
- int rc;
-
- rc = gpio_request(gpio, "reset generator");
- if (rc) {
- printk(KERN_ERR "Can't request reset_gpio\n");
- goto out;
+ reset_gpio = gpiod_get(NULL, "reset", GPIOD_ASIS);
+ if (IS_ERR(reset_gpio)) {
+ pr_err("Can't request reset_gpio: %pe\n", reset_gpio);
+ return PTR_ERR(reset_gpio);
}
if (output)
- rc = gpio_direction_output(gpio, level);
+ return gpiod_direction_output(reset_gpio, level);
else
- rc = gpio_direction_input(gpio);
- if (rc) {
- printk(KERN_ERR "Can't configure reset_gpio\n");
- gpio_free(gpio);
- goto out;
- }
-
-out:
- if (!rc)
- reset_gpio = gpio;
-
- return rc;
+ return gpiod_direction_input(reset_gpio);
}
/*
@@ -50,16 +37,16 @@ int init_gpio_reset(int gpio, int output, int level)
*/
static void do_gpio_reset(void)
{
- BUG_ON(reset_gpio == -1);
+ BUG_ON(IS_ERR(reset_gpio));
/* drive it low */
- gpio_direction_output(reset_gpio, 0);
+ gpiod_direction_output(reset_gpio, 0);
mdelay(2);
/* rising edge or drive high */
- gpio_set_value(reset_gpio, 1);
+ gpiod_set_value(reset_gpio, 1);
mdelay(2);
/* falling edge */
- gpio_set_value(reset_gpio, 0);
+ gpiod_set_value(reset_gpio, 0);
/* give it some time */
mdelay(10);
diff --git a/arch/arm/mach-pxa/reset.h b/arch/arm/mach-pxa/reset.h
index 963dd190bc13..5864f61a0e94 100644
--- a/arch/arm/mach-pxa/reset.h
+++ b/arch/arm/mach-pxa/reset.h
@@ -13,10 +13,9 @@ extern void pxa_register_wdt(unsigned int reset_status);
/**
* init_gpio_reset() - register GPIO as reset generator
- * @gpio: gpio nr
* @output: set gpio as output instead of input during normal work
* @level: output level
*/
-extern int init_gpio_reset(int gpio, int output, int level);
+extern int init_gpio_reset(int output, int level);
#endif /* __ASM_ARCH_RESET_H */
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index b72c2916426a..acb2b5495dbe 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -1020,9 +1020,13 @@ static void spitz_restart(enum reboot_mode mode, const char *cmd)
spitz_poweroff();
}
+GPIO_LOOKUP_SINGLE(spitz_reset_gpio_table, NULL, "pxa-gpio",
+ SPITZ_GPIO_ON_RESET, "reset", GPIO_ACTIVE_HIGH);
+
static void __init spitz_init(void)
{
- init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
+ gpiod_add_lookup_table(&spitz_reset_gpio_table);
+ init_gpio_reset(1, 0);
pm_power_off = spitz_poweroff;
PMCR = 0x00;
--
2.42.0
On Wed, Oct 11, 2023 at 3:24 PM Duje Mihanović <[email protected]> wrote:
>
> Sharp's Spitz board still uses the legacy GPIO interface for configuring
> its two onboard LEDs.
>
> Convert them to use the GPIO descriptor interface.
>
> Reviewed-by: Linus Walleij <[email protected]>
> Signed-off-by: Duje Mihanović <[email protected]>
> ---
> arch/arm/mach-pxa/spitz.c | 14 ++++++++++++--
> 1 file changed, 12 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
> index 535e2b2e997b..9efd603c715a 100644
> --- a/arch/arm/mach-pxa/spitz.c
> +++ b/arch/arm/mach-pxa/spitz.c
> @@ -452,16 +452,25 @@ static inline void spitz_keys_init(void) {}
> * LEDs
> ******************************************************************************/
> #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
> +static struct gpiod_lookup_table spitz_led_gpio_table = {
> + .dev_id = "leds-gpio",
> + .table = {
> + GPIO_LOOKUP_IDX("pxa-gpio", SPITZ_GPIO_LED_ORANGE, NULL, 0,
> + GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("pxa-gpio", SPITZ_GPIO_LED_GREEN, NULL, 1,
> + GPIO_ACTIVE_HIGH),
> + { }
> + }
> +};
> +
> static struct gpio_led spitz_gpio_leds[] = {
> {
> .name = "spitz:amber:charge",
> .default_trigger = "sharpsl-charge",
> - .gpio = SPITZ_GPIO_LED_ORANGE,
> },
> {
> .name = "spitz:green:hddactivity",
> .default_trigger = "disk-activity",
> - .gpio = SPITZ_GPIO_LED_GREEN,
> },
> };
>
> @@ -480,6 +489,7 @@ static struct platform_device spitz_led_device = {
>
> static void __init spitz_leds_init(void)
> {
> + gpiod_add_lookup_table(&spitz_led_gpio_table);
> platform_device_register(&spitz_led_device);
> }
> #else
>
> --
> 2.42.0
>
>
Which driver consumes these GPIOs? Doesn't it need any conversion?
Bart
On Wednesday, October 11, 2023 4:21:39 PM CEST Bartosz Golaszewski wrote:
> Which driver consumes these GPIOs? Doesn't it need any conversion?
That is drivers/leds/leds-gpio.c which has already been converted to the
descriptor API way back in 5c51277a9aba ("leds: leds-gpio: Add support for
GPIO descriptors").
Regards,
Duje
On Wed, Oct 11, 2023 at 5:17 PM Duje Mihanović <[email protected]> wrote:
>
> On Wednesday, October 11, 2023 4:21:39 PM CEST Bartosz Golaszewski wrote:
> > Which driver consumes these GPIOs? Doesn't it need any conversion?
>
> That is drivers/leds/leds-gpio.c which has already been converted to the
> descriptor API way back in 5c51277a9aba ("leds: leds-gpio: Add support for
> GPIO descriptors").
>
> Regards,
> Duje
>
>
>
Perfect. In that case:
Reviewed-by: Bartosz Golaszewski <[email protected]>