On Thu, 31 Aug 2023 at 01:18, Simon Glass <[email protected]> wrote:
>
> The Devicetree specification skips over handling of a logical view of
> the memory map, pointing users to the UEFI specification.
>
> It is common to split firmware into 'Platform Init', which does the
> initial hardware setup and a "Payload" which selects the OS to be booted.
> Thus an handover interface is required between these two pieces.
>
> Where UEFI boot-time services are not available, but UEFI firmware is
> present on either side of this interface, information about memory usage
> and attributes must be presented to the "Payload" in some form.
>
I don't think the UEFI references are needed or helpful here.
> This aims to provide an small schema addition for this mapping.
>
> For now, no attempt is made to create an exhaustive binding, so there are
> some example types listed. More can be added later.
>
> The compatible string is not included, since the node name is enough to
> indicate the purpose of a node, as per the existing reserved-memory
> schema.
>
> This binding does not include a binding for the memory 'attribute'
> property, defined by EFI_BOOT_SERVICES.GetMemoryMap(). It may be useful
> to have that as well, but perhaps not as a bit mask.
>
> Signed-off-by: Simon Glass <[email protected]>
> ---
>
> Changes in v5:
> - Drop the memory-map node (should have done that in v4)
> - Tidy up schema a bit
>
> Changes in v4:
> - Make use of the reserved-memory node instead of creating a new one
>
> Changes in v3:
> - Reword commit message again
> - cc a lot more people, from the FFI patch
> - Split out the attributes into the /memory nodes
>
> Changes in v2:
> - Reword commit message
>
> .../reserved-memory/common-reserved.yaml | 53 +++++++++++++++++++
> 1 file changed, 53 insertions(+)
> create mode 100644 dtschema/schemas/reserved-memory/common-reserved.yaml
>
> diff --git a/dtschema/schemas/reserved-memory/common-reserved.yaml b/dtschema/schemas/reserved-memory/common-reserved.yaml
> new file mode 100644
> index 0000000..d1b466b
> --- /dev/null
> +++ b/dtschema/schemas/reserved-memory/common-reserved.yaml
> @@ -0,0 +1,53 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/reserved-memory/common-reserved.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Common memory reservations
> +
> +description: |
> + Specifies that the reserved memory region can be used for the purpose
> + indicated by its node name.
> +
> + Clients may reuse this reserved memory if they understand what it is for.
> +
> +maintainers:
> + - Simon Glass <[email protected]>
> +
> +allOf:
> + - $ref: reserved-memory.yaml
> +
> +properties:
> + $nodename:
> + enum:
> + - acpi-reclaim
> + - acpi-nvs
> + - boot-code
> + - boot-data
> + - runtime-code
> + - runtime-data
> +
These types are used by firmware to describe the nature of certain
memory regions to the OS. Boot code and data can be discarded, as well
as ACPI reclaim after its contents have been consumed. Runtime code
and data need to be mapped for runtime features to work.
When one firmware phase communicates the purpose of a certain memory
reservation to another, it is typically not limited to whether its
needs to be preserved and when it needs to be mapped (and with which
attributes). I'd expect a memory reservation appearing under this node
to have a clearly defined purpose, and the subsequent phases need to
be able to discover this information.
For example, a communication buffer for secure<->non-secure
communication or a page with spin tables used by PSCI. None of the
proposed labels are appropriate for this, and I'd much rather have a
compatible string or some other property that clarifies the nature in
a more suitable way. Note that 'no-map' already exists to indicate
that the CPU should not map this memory unless it does so for the
specific purpose that the reservation was made for.
> + reg:
> + description: region of memory that is reserved for the purpose indicated
> + by the node name.
> +
> +required:
> + - reg
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + boot-code@12340000 {
> + reg = <0x12340000 0x00800000>;
> + };
> +
> + boot-data@43210000 {
> + reg = <0x43210000 0x00800000>;
> + };
> + };
> --
> 2.42.0.rc2.253.gd59a3bf2b4-goog
>