From: Alexandr Sapozhnikov <[email protected]>
[ Upstream commit 7245e629dcaaf308f1868aeffa218e9849c77893 ]
After having been compared to NULL value at cirrus.c:455, pointer
'pipe->plane.state->fb' is passed as 1st parameter in call to function
'cirrus_fb_blit_rect' at cirrus.c:461, where it is dereferenced at
cirrus.c:316.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
v2:
* aligned commit message to line-length limits
Signed-off-by: Alexandr Sapozhnikov <[email protected]>
Reviewed-by: Thomas Zimmermann <[email protected]>
Signed-off-by: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/tiny/cirrus.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/tiny/cirrus.c b/drivers/gpu/drm/tiny/cirrus.c
index 678c2ef1cae70..ffa7e61dd1835 100644
--- a/drivers/gpu/drm/tiny/cirrus.c
+++ b/drivers/gpu/drm/tiny/cirrus.c
@@ -455,7 +455,7 @@ static void cirrus_pipe_update(struct drm_simple_display_pipe *pipe,
if (state->fb && cirrus->cpp != cirrus_cpp(state->fb))
cirrus_mode_set(cirrus, &crtc->mode, state->fb);
- if (drm_atomic_helper_damage_merged(old_state, state, &rect))
+ if (state->fb && drm_atomic_helper_damage_merged(old_state, state, &rect))
cirrus_fb_blit_rect(state->fb, &shadow_plane_state->data[0], &rect);
}
--
2.39.2
From: Alexander Aring <[email protected]>
[ Upstream commit 6c993779ea1d0cccdb3a5d7d45446dd229e610a3 ]
This patch fixes a buffer overflow access of skb->data if
ieee802154_hdr_peek_addrs() fails.
Reported-by: lianhui tang <[email protected]>
Signed-off-by: Alexander Aring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stefan Schmidt <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ieee802154/ca8210.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ieee802154/ca8210.c b/drivers/net/ieee802154/ca8210.c
index e1a569b99e4a6..0b0c6c0764fe9 100644
--- a/drivers/net/ieee802154/ca8210.c
+++ b/drivers/net/ieee802154/ca8210.c
@@ -1913,6 +1913,8 @@ static int ca8210_skb_tx(
* packet
*/
mac_len = ieee802154_hdr_peek_addrs(skb, &header);
+ if (mac_len < 0)
+ return mac_len;
secspec.security_level = header.sec.level;
secspec.key_id_mode = header.sec.key_id_mode;
--
2.39.2
From: Rafał Szalecki <[email protected]>
[ Upstream commit db50f7a3983f0154e730f1147ef729e0c5c2f90c ]
Add signature for the Logitech MX Master 3S mouse over Bluetooth.
Signed-off-by: Rafał Szalecki <[email protected]>
Reviewed-by: Bastien Nocera <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-logitech-hidpp.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
index 5efc591a02a03..3c00e6ac8e76a 100644
--- a/drivers/hid/hid-logitech-hidpp.c
+++ b/drivers/hid/hid-logitech-hidpp.c
@@ -4378,6 +4378,8 @@ static const struct hid_device_id hidpp_devices[] = {
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb01e) },
{ /* MX Master 3 mouse over Bluetooth */
HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb023) },
+ { /* MX Master 3S mouse over Bluetooth */
+ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb034) },
{}
};
--
2.39.2
From: Reka Norman <[email protected]>
[ Upstream commit 8ae2f2b0a28416ed2f6d8478ac8b9f7862f36785 ]
When a reset notify IPC message is received, the ISR schedules a work
function and passes the ISHTP device to it via a global pointer
ishtp_dev. If ish_probe() fails, the devm-managed device resources
including ishtp_dev are freed, but the work is not cancelled, causing a
use-after-free when the work function tries to access ishtp_dev. Use
devm_work_autocancel() instead, so that the work is automatically
cancelled if probe fails.
Signed-off-by: Reka Norman <[email protected]>
Acked-by: Srinivas Pandruvada <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/intel-ish-hid/ipc/ipc.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/hid/intel-ish-hid/ipc/ipc.c b/drivers/hid/intel-ish-hid/ipc/ipc.c
index 15e14239af829..a49c6affd7c4c 100644
--- a/drivers/hid/intel-ish-hid/ipc/ipc.c
+++ b/drivers/hid/intel-ish-hid/ipc/ipc.c
@@ -5,6 +5,7 @@
* Copyright (c) 2014-2016, Intel Corporation.
*/
+#include <linux/devm-helpers.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/delay.h>
@@ -621,7 +622,6 @@ static void recv_ipc(struct ishtp_device *dev, uint32_t doorbell_val)
case MNG_RESET_NOTIFY:
if (!ishtp_dev) {
ishtp_dev = dev;
- INIT_WORK(&fw_reset_work, fw_reset_work_fn);
}
schedule_work(&fw_reset_work);
break;
@@ -940,6 +940,7 @@ struct ishtp_device *ish_dev_init(struct pci_dev *pdev)
{
struct ishtp_device *dev;
int i;
+ int ret;
dev = devm_kzalloc(&pdev->dev,
sizeof(struct ishtp_device) + sizeof(struct ish_hw),
@@ -975,6 +976,12 @@ struct ishtp_device *ish_dev_init(struct pci_dev *pdev)
list_add_tail(&tx_buf->link, &dev->wr_free_list);
}
+ ret = devm_work_autocancel(&pdev->dev, &fw_reset_work, fw_reset_work_fn);
+ if (ret) {
+ dev_err(dev->devc, "Failed to initialise FW reset work\n");
+ return NULL;
+ }
+
dev->ops = &ish_hw_ops;
dev->devc = &pdev->dev;
dev->mtu = IPC_PAYLOAD_SIZE - sizeof(struct ishtp_msg_hdr);
--
2.39.2
From: Kars de Jong <[email protected]>
[ Upstream commit 0d9fad91abfd723ea5070a46d98a9f4496c93ba9 ]
The calculation of end addresses of memory chunks overflowed to 0 when
a memory chunk is located at the end of 32-bit address space.
This is the case for the HP300 architecture.
Link: https://lore.kernel.org/linux-m68k/CACz-3rhUo5pgNwdWHaPWmz+30Qo9xCg70wNxdf7o5x-6tXq8QQ@mail.gmail.com/
Signed-off-by: Kars de Jong <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/m68k/mm/motorola.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c
index 2a375637e0077..9113012240789 100644
--- a/arch/m68k/mm/motorola.c
+++ b/arch/m68k/mm/motorola.c
@@ -437,7 +437,7 @@ void __init paging_init(void)
}
min_addr = m68k_memory[0].addr;
- max_addr = min_addr + m68k_memory[0].size;
+ max_addr = min_addr + m68k_memory[0].size - 1;
memblock_add_node(m68k_memory[0].addr, m68k_memory[0].size, 0,
MEMBLOCK_NONE);
for (i = 1; i < m68k_num_memory;) {
@@ -452,21 +452,21 @@ void __init paging_init(void)
}
memblock_add_node(m68k_memory[i].addr, m68k_memory[i].size, i,
MEMBLOCK_NONE);
- addr = m68k_memory[i].addr + m68k_memory[i].size;
+ addr = m68k_memory[i].addr + m68k_memory[i].size - 1;
if (addr > max_addr)
max_addr = addr;
i++;
}
m68k_memoffset = min_addr - PAGE_OFFSET;
- m68k_virt_to_node_shift = fls(max_addr - min_addr - 1) - 6;
+ m68k_virt_to_node_shift = fls(max_addr - min_addr) - 6;
module_fixup(NULL, __start_fixup, __stop_fixup);
flush_icache();
- high_memory = phys_to_virt(max_addr);
+ high_memory = phys_to_virt(max_addr) + 1;
min_low_pfn = availmem >> PAGE_SHIFT;
- max_pfn = max_low_pfn = max_addr >> PAGE_SHIFT;
+ max_pfn = max_low_pfn = (max_addr >> PAGE_SHIFT) + 1;
/* Reserve kernel text/data/bss and the memory allocated in head.S */
memblock_reserve(m68k_memory[0].addr, availmem - m68k_memory[0].addr);
--
2.39.2
From: Michael Schmitz <[email protected]>
[ Upstream commit e36a82bebbf7da814530d5a179bef9df5934b717 ]
__get_kernel_nofault() does copy data in supervisor mode when
forcing a task backtrace log through /proc/sysrq_trigger.
This is expected cause a bus error exception on e.g. NULL
pointer dereferencing when logging a kernel task has no
workqueue associated. This bus error ought to be ignored.
Our 030 bus error handler is ill equipped to deal with this:
Whenever ssw indicates a kernel mode access on a data fault,
we don't even attempt to handle the fault and instead always
send a SEGV signal (or panic). As a result, the check
for exception handling at the fault PC (buried in
send_sig_fault() which gets called from do_page_fault()
eventually) is never used.
In contrast, both 040 and 060 access error handlers do not
care whether a fault happened on supervisor mode access,
and will call do_page_fault() on those, ultimately honoring
the exception table.
Add a check in bus_error030 to call do_page_fault() in case
we do have an entry for the fault PC in our exception table.
I had attempted a fix for this earlier in 2019 that did rely
on testing pagefault_disabled() (see link below) to achieve
the same thing, but this patch should be more generic.
Tested on 030 Atari Falcon.
Reported-by: Eero Tamminen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael Schmitz <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/m68k/kernel/traps.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/m68k/kernel/traps.c b/arch/m68k/kernel/traps.c
index 5c8cba0efc63e..a700807c9b6d9 100644
--- a/arch/m68k/kernel/traps.c
+++ b/arch/m68k/kernel/traps.c
@@ -30,6 +30,7 @@
#include <linux/init.h>
#include <linux/ptrace.h>
#include <linux/kallsyms.h>
+#include <linux/extable.h>
#include <asm/setup.h>
#include <asm/fpu.h>
@@ -545,7 +546,8 @@ static inline void bus_error030 (struct frame *fp)
errorcode |= 2;
if (mmusr & (MMU_I | MMU_WP)) {
- if (ssw & 4) {
+ /* We might have an exception table for this PC */
+ if (ssw & 4 && !search_exception_tables(fp->ptregs.pc)) {
pr_err("Data %s fault at %#010lx in %s (pc=%#lx)\n",
ssw & RW ? "read" : "write",
fp->un.fmtb.daddr,
--
2.39.2
From: Lorenz Bauer <[email protected]>
[ Upstream commit dfdd608c3b365f0fd49d7e13911ebcde06b9865b ]
Add a regression test that ensures that a VAR pointing at a
modifier which follows a PTR (or STRUCT or ARRAY) is resolved
correctly by the datasec validator.
Signed-off-by: Lorenz Bauer <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/bpf/prog_tests/btf.c | 28 ++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/tools/testing/selftests/bpf/prog_tests/btf.c b/tools/testing/selftests/bpf/prog_tests/btf.c
index de1b5b9eb93a8..d8d1292e73b53 100644
--- a/tools/testing/selftests/bpf/prog_tests/btf.c
+++ b/tools/testing/selftests/bpf/prog_tests/btf.c
@@ -879,6 +879,34 @@ static struct btf_raw_test raw_tests[] = {
.btf_load_err = true,
.err_str = "Invalid elem",
},
+{
+ .descr = "var after datasec, ptr followed by modifier",
+ .raw_types = {
+ /* .bss section */ /* [1] */
+ BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_DATASEC, 0, 2),
+ sizeof(void*)+4),
+ BTF_VAR_SECINFO_ENC(4, 0, sizeof(void*)),
+ BTF_VAR_SECINFO_ENC(6, sizeof(void*), 4),
+ /* int */ /* [2] */
+ BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4),
+ /* int* */ /* [3] */
+ BTF_TYPE_ENC(0, BTF_INFO_ENC(BTF_KIND_PTR, 0, 0), 2),
+ BTF_VAR_ENC(NAME_TBD, 3, 0), /* [4] */
+ /* const int */ /* [5] */
+ BTF_TYPE_ENC(0, BTF_INFO_ENC(BTF_KIND_CONST, 0, 0), 2),
+ BTF_VAR_ENC(NAME_TBD, 5, 0), /* [6] */
+ BTF_END_RAW,
+ },
+ .str_sec = "\0a\0b\0c\0",
+ .str_sec_size = sizeof("\0a\0b\0c\0"),
+ .map_type = BPF_MAP_TYPE_ARRAY,
+ .map_name = ".bss",
+ .key_size = sizeof(int),
+ .value_size = sizeof(void*)+4,
+ .key_type_id = 0,
+ .value_type_id = 1,
+ .max_entries = 1,
+},
/* Test member exceeds the size of struct.
*
* struct A {
--
2.39.2
From: Linus Torvalds <[email protected]>
[ Upstream commit 8ca09d5fa3549d142c2080a72a4c70ce389163cd ]
It turns out that commit 596ff4a09b89 ("cpumask: re-introduce
constant-sized cpumask optimizations") exposed a number of cases of
drivers not checking the result of "cpumask_next()" and friends
correctly.
The documented correct check for "no more cpus in the cpumask" is to
check for the result being equal or larger than the number of possible
CPU ids, exactly _because_ we've always done those constant-sized
cpumask scans using a widened type before. So the return value of a
cpumask scan should be checked with
if (cpu >= nr_cpu_ids)
...
because the cpumask scan did not necessarily stop exactly *at* that
maximum CPU id.
But a few cases ended up instead using checks like
if (cpu == nr_cpumask_bits)
...
which used that internal "widened" number of bits. And that used to
work pretty much by accident (ok, in this case "by accident" is simply
because it matched the historical internal implementation of the cpumask
scanning, so it was more of a "intentionally using implementation
details rather than an accident").
But the extended constant-sized optimizations then did that internal
implementation differently, and now that code that did things wrong but
matched the old implementation no longer worked at all.
Which then causes subsequent odd problems due to using what ends up
being an invalid CPU ID.
Most of these cases require either unusual hardware or special uses to
hit, but the random.c one triggers quite easily.
All you really need is to have a sufficiently small CONFIG_NR_CPUS value
for the bit scanning optimization to be triggered, but not enough CPUs
to then actually fill that widened cpumask. At that point, the cpumask
scanning will return the NR_CPUS constant, which is _not_ the same as
nr_cpumask_bits.
This just does the mindless fix with
sed -i 's/== nr_cpumask_bits/>= nr_cpu_ids/'
to fix the incorrect uses.
The ones in the SCSI lpfc driver in particular could probably be fixed
more cleanly by just removing that repeated pattern entirely, but I am
not emptionally invested enough in that driver to care.
Reported-and-tested-by: Guenter Roeck <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]/
Reported-and-tested-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/lkml/CAMuHMdUKo_Sf7TjKzcNDa8Ve+6QrK+P8nSQrSQ=6LTRmcBKNww@mail.gmail.com/
Reported-by: Vernon Yang <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]/
Cc: Yury Norov <[email protected]>
Cc: Jason A. Donenfeld <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/xmon/xmon.c | 2 +-
drivers/char/random.c | 2 +-
drivers/net/wireguard/queueing.h | 2 +-
drivers/scsi/lpfc/lpfc_init.c | 14 +++++++-------
4 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 0da66bc4823d4..3b4e2475fc4ef 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -1277,7 +1277,7 @@ static int xmon_batch_next_cpu(void)
while (!cpumask_empty(&xmon_batch_cpus)) {
cpu = cpumask_next_wrap(smp_processor_id(), &xmon_batch_cpus,
xmon_batch_start_cpu, true);
- if (cpu == nr_cpumask_bits)
+ if (cpu >= nr_cpu_ids)
break;
if (xmon_batch_start_cpu == -1)
xmon_batch_start_cpu = cpu;
diff --git a/drivers/char/random.c b/drivers/char/random.c
index ce3ccd172cc86..253f2ddb89130 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -1311,7 +1311,7 @@ static void __cold try_to_generate_entropy(void)
/* Basic CPU round-robin, which avoids the current CPU. */
do {
cpu = cpumask_next(cpu, &timer_cpus);
- if (cpu == nr_cpumask_bits)
+ if (cpu >= nr_cpu_ids)
cpu = cpumask_first(&timer_cpus);
} while (cpu == smp_processor_id() && num_cpus > 1);
diff --git a/drivers/net/wireguard/queueing.h b/drivers/net/wireguard/queueing.h
index 583adb37ee1e3..125284b346a77 100644
--- a/drivers/net/wireguard/queueing.h
+++ b/drivers/net/wireguard/queueing.h
@@ -106,7 +106,7 @@ static inline int wg_cpumask_choose_online(int *stored_cpu, unsigned int id)
{
unsigned int cpu = *stored_cpu, cpu_index, i;
- if (unlikely(cpu == nr_cpumask_bits ||
+ if (unlikely(cpu >= nr_cpu_ids ||
!cpumask_test_cpu(cpu, cpu_online_mask))) {
cpu_index = id % cpumask_weight(cpu_online_mask);
cpu = cpumask_first(cpu_online_mask);
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 25ba20e428255..3fbd3bec26fc1 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -12507,7 +12507,7 @@ lpfc_cpu_affinity_check(struct lpfc_hba *phba, int vectors)
goto found_same;
new_cpu = cpumask_next(
new_cpu, cpu_present_mask);
- if (new_cpu == nr_cpumask_bits)
+ if (new_cpu >= nr_cpu_ids)
new_cpu = first_cpu;
}
/* At this point, we leave the CPU as unassigned */
@@ -12521,7 +12521,7 @@ lpfc_cpu_affinity_check(struct lpfc_hba *phba, int vectors)
* selecting the same IRQ.
*/
start_cpu = cpumask_next(new_cpu, cpu_present_mask);
- if (start_cpu == nr_cpumask_bits)
+ if (start_cpu >= nr_cpu_ids)
start_cpu = first_cpu;
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
@@ -12557,7 +12557,7 @@ lpfc_cpu_affinity_check(struct lpfc_hba *phba, int vectors)
goto found_any;
new_cpu = cpumask_next(
new_cpu, cpu_present_mask);
- if (new_cpu == nr_cpumask_bits)
+ if (new_cpu >= nr_cpu_ids)
new_cpu = first_cpu;
}
/* We should never leave an entry unassigned */
@@ -12575,7 +12575,7 @@ lpfc_cpu_affinity_check(struct lpfc_hba *phba, int vectors)
* selecting the same IRQ.
*/
start_cpu = cpumask_next(new_cpu, cpu_present_mask);
- if (start_cpu == nr_cpumask_bits)
+ if (start_cpu >= nr_cpu_ids)
start_cpu = first_cpu;
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
@@ -12648,7 +12648,7 @@ lpfc_cpu_affinity_check(struct lpfc_hba *phba, int vectors)
goto found_hdwq;
}
new_cpu = cpumask_next(new_cpu, cpu_present_mask);
- if (new_cpu == nr_cpumask_bits)
+ if (new_cpu >= nr_cpu_ids)
new_cpu = first_cpu;
}
@@ -12663,7 +12663,7 @@ lpfc_cpu_affinity_check(struct lpfc_hba *phba, int vectors)
goto found_hdwq;
new_cpu = cpumask_next(new_cpu, cpu_present_mask);
- if (new_cpu == nr_cpumask_bits)
+ if (new_cpu >= nr_cpu_ids)
new_cpu = first_cpu;
}
@@ -12674,7 +12674,7 @@ lpfc_cpu_affinity_check(struct lpfc_hba *phba, int vectors)
found_hdwq:
/* We found an available entry, copy the IRQ info */
start_cpu = cpumask_next(new_cpu, cpu_present_mask);
- if (start_cpu == nr_cpumask_bits)
+ if (start_cpu >= nr_cpu_ids)
start_cpu = first_cpu;
cpup->hdwq = new_cpup->hdwq;
logit:
--
2.39.2
From: Kang Chen <[email protected]>
[ Upstream commit 06d1a90de60208054cca15ef200138cfdbb642a9 ]
In case devm_add_action() fails, check it in the caller of
interrupt_preinit_v3_hw().
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kang Chen <[email protected]>
Acked-by: Xiang Chen <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 0c3fcb8078062..a63279f55d096 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -2495,8 +2495,7 @@ static int interrupt_preinit_v3_hw(struct hisi_hba *hisi_hba)
hisi_hba->cq_nvecs = vectors - BASE_VECTORS_V3_HW;
shost->nr_hw_queues = hisi_hba->cq_nvecs;
- devm_add_action(&pdev->dev, hisi_sas_v3_free_vectors, pdev);
- return 0;
+ return devm_add_action(&pdev->dev, hisi_sas_v3_free_vectors, pdev);
}
static int interrupt_init_v3_hw(struct hisi_hba *hisi_hba)
--
2.39.2
From: Maurizio Lombardi <[email protected]>
[ Upstream commit 6cc55c969b7ce8d85e09a636693d4126c3676c11 ]
The first half of the error message is printed by pr_err(), the second half
is printed by pr_debug(). The user will therefore see only the first part
of the message and will miss some useful information.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Maurizio Lombardi <[email protected]>
Reviewed-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/target/iscsi/iscsi_target_parameters.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/target/iscsi/iscsi_target_parameters.c b/drivers/target/iscsi/iscsi_target_parameters.c
index 2317fb077db0e..557516c642c3b 100644
--- a/drivers/target/iscsi/iscsi_target_parameters.c
+++ b/drivers/target/iscsi/iscsi_target_parameters.c
@@ -1262,18 +1262,20 @@ static struct iscsi_param *iscsi_check_key(
return param;
if (!(param->phase & phase)) {
- pr_err("Key \"%s\" may not be negotiated during ",
- param->name);
+ char *phase_name;
+
switch (phase) {
case PHASE_SECURITY:
- pr_debug("Security phase.\n");
+ phase_name = "Security";
break;
case PHASE_OPERATIONAL:
- pr_debug("Operational phase.\n");
+ phase_name = "Operational";
break;
default:
- pr_debug("Unknown phase.\n");
+ phase_name = "Unknown";
}
+ pr_err("Key \"%s\" may not be negotiated during %s phase.\n",
+ param->name, phase_name);
return NULL;
}
--
2.39.2
From: Adrien Thierry <[email protected]>
[ Upstream commit 2ebe16155dc8bd4e602cad5b5f65458d2eaa1a75 ]
The ufshcd driver uses simpleondemand governor for devfreq. Add it to the
list of ufshcd softdeps to allow userspace initramfs tools like dracut to
automatically pull the governor module into the initramfs together with UFS
drivers.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Adrien Thierry <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ufs/core/ufshcd.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index 2ddc1aba0ad75..edb93d2c5a781 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -10095,4 +10095,5 @@ module_exit(ufshcd_core_exit);
MODULE_AUTHOR("Santosh Yaragnavi <[email protected]>");
MODULE_AUTHOR("Vinayak Holikatti <[email protected]>");
MODULE_DESCRIPTION("Generic UFS host controller driver Core");
+MODULE_SOFTDEP("pre: governor_simpleondemand");
MODULE_LICENSE("GPL");
--
2.39.2
From: Justin Tee <[email protected]>
[ Upstream commit 312320b0e0ec21249a17645683fe5304d796aec1 ]
If kzalloc() fails in lpfc_sli4_cgn_params_read(), then we rely on
lpfc_read_object()'s routine to NULL check pdata.
Currently, an early return error is thrown from lpfc_read_object() to
protect us from NULL ptr dereference, but the errno code is -ENODEV.
Change the errno code to a more appropriate -ENOMEM.
Reported-by: Kang Chen <[email protected]>
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Justin Tee <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/lpfc/lpfc_init.c | 2 ++
drivers/scsi/lpfc/lpfc_sli.c | 4 ----
2 files changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 3fbd3bec26fc1..eeb73da754d0d 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -7235,6 +7235,8 @@ lpfc_sli4_cgn_params_read(struct lpfc_hba *phba)
/* Find out if the FW has a new set of congestion parameters. */
len = sizeof(struct lpfc_cgn_param);
pdata = kzalloc(len, GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
ret = lpfc_read_object(phba, (char *)LPFC_PORT_CFG_NAME,
pdata, len);
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 55a0d4013439f..3aa7206537de7 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -22113,10 +22113,6 @@ lpfc_read_object(struct lpfc_hba *phba, char *rdobject, uint32_t *datap,
struct lpfc_dmabuf *pcmd;
u32 rd_object_name[LPFC_MBX_OBJECT_NAME_LEN_DW] = {0};
- /* sanity check on queue memory */
- if (!datap)
- return -ENODEV;
-
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mbox)
return -ENOMEM;
--
2.39.2
From: Ranjan Kumar <[email protected]>
[ Upstream commit ba8a9ba41fbde250fd8b0ed1e5dad0dc9318df46 ]
Return proper non-zero return values for all the cases when the controller
initialization and re-initialization fails.
Signed-off-by: Ranjan Kumar <[email protected]>
Signed-off-by: Sreekanth Reddy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/mpi3mr/mpi3mr_fw.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index fa903a70baac8..29acf6111db30 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -3840,8 +3840,10 @@ int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc)
dprint_init(mrioc, "allocating config page buffers\n");
mrioc->cfg_page = dma_alloc_coherent(&mrioc->pdev->dev,
MPI3MR_DEFAULT_CFG_PAGE_SZ, &mrioc->cfg_page_dma, GFP_KERNEL);
- if (!mrioc->cfg_page)
+ if (!mrioc->cfg_page) {
+ retval = -1;
goto out_failed_noretry;
+ }
mrioc->cfg_page_sz = MPI3MR_DEFAULT_CFG_PAGE_SZ;
@@ -3903,8 +3905,10 @@ int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc)
dprint_init(mrioc, "allocating memory for throttle groups\n");
sz = sizeof(struct mpi3mr_throttle_group_info);
mrioc->throttle_groups = kcalloc(mrioc->num_io_throttle_group, sz, GFP_KERNEL);
- if (!mrioc->throttle_groups)
+ if (!mrioc->throttle_groups) {
+ retval = -1;
goto out_failed_noretry;
+ }
}
retval = mpi3mr_enable_events(mrioc);
@@ -3924,6 +3928,7 @@ int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc)
mpi3mr_memset_buffers(mrioc);
goto retry_init;
}
+ retval = -1;
out_failed_noretry:
ioc_err(mrioc, "controller initialization failed\n");
mpi3mr_issue_reset(mrioc, MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT,
@@ -4036,6 +4041,7 @@ int mpi3mr_reinit_ioc(struct mpi3mr_ioc *mrioc, u8 is_resume)
ioc_err(mrioc,
"cannot create minimum number of operational queues expected:%d created:%d\n",
mrioc->shost->nr_hw_queues, mrioc->num_op_reply_q);
+ retval = -1;
goto out_failed_noretry;
}
@@ -4102,6 +4108,7 @@ int mpi3mr_reinit_ioc(struct mpi3mr_ioc *mrioc, u8 is_resume)
mpi3mr_memset_buffers(mrioc);
goto retry_init;
}
+ retval = -1;
out_failed_noretry:
ioc_err(mrioc, "controller %s is failed\n",
(is_resume)?"resume":"re-initialization");
--
2.39.2
From: Ranjan Kumar <[email protected]>
[ Upstream commit 8e45183978d64699df639e795235433a60f35047 ]
When the SAS Transport Layer support is enabled and a device exposed to
the OS by the driver fails INQUIRY commands, the driver frees up the memory
allocated for an internal HBA port data structure. However, in some places,
the reference to the freed memory is not cleared. When the firmware sends
the Device Info change event for the same device again, the freed memory is
accessed and that leads to memory corruption and OS crash.
Signed-off-by: Ranjan Kumar <[email protected]>
Signed-off-by: Sreekanth Reddy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/mpi3mr/mpi3mr_transport.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/mpi3mr/mpi3mr_transport.c b/drivers/scsi/mpi3mr/mpi3mr_transport.c
index b795a325534d3..be25f242fa794 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_transport.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_transport.c
@@ -2358,15 +2358,16 @@ int mpi3mr_report_tgtdev_to_sas_transport(struct mpi3mr_ioc *mrioc,
tgtdev->host_exposed = 1;
if (!mpi3mr_sas_port_add(mrioc, tgtdev->dev_handle,
sas_address_parent, hba_port)) {
- tgtdev->host_exposed = 0;
retval = -1;
- } else if ((!tgtdev->starget)) {
- if (!mrioc->is_driver_loading)
+ } else if ((!tgtdev->starget) && (!mrioc->is_driver_loading)) {
mpi3mr_sas_port_remove(mrioc, sas_address,
sas_address_parent, hba_port);
- tgtdev->host_exposed = 0;
retval = -1;
}
+ if (retval) {
+ tgtdev->dev_spec.sas_sata_inf.hba_port = NULL;
+ tgtdev->host_exposed = 0;
+ }
return retval;
}
@@ -2395,6 +2396,7 @@ void mpi3mr_remove_tgtdev_from_sas_transport(struct mpi3mr_ioc *mrioc,
mpi3mr_sas_port_remove(mrioc, sas_address, sas_address_parent,
hba_port);
tgtdev->host_exposed = 0;
+ tgtdev->dev_spec.sas_sata_inf.hba_port = NULL;
}
/**
@@ -2451,7 +2453,7 @@ static u8 mpi3mr_get_port_id_by_rphy(struct mpi3mr_ioc *mrioc, struct sas_rphy *
tgtdev = __mpi3mr_get_tgtdev_by_addr_and_rphy(mrioc,
rphy->identify.sas_address, rphy);
- if (tgtdev) {
+ if (tgtdev && tgtdev->dev_spec.sas_sata_inf.hba_port) {
port_id =
tgtdev->dev_spec.sas_sata_inf.hba_port->port_id;
mpi3mr_tgtdev_put(tgtdev);
--
2.39.2
From: Daniel Wagner <[email protected]>
[ Upstream commit 877b03795fcf29ff2e2351f7e574ecc9b9c51732 ]
Commit 44c57f205876 ("scsi: qla2xxx: Changes to support FCP2 Target") added
support for FC2 Targets. Unfortunately, there are older setups which break
with this new feature enabled.
Allow to disable it via module option.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Wagner <[email protected]>
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/qla2xxx/qla_gbl.h | 1 +
drivers/scsi/qla2xxx/qla_init.c | 3 ++-
drivers/scsi/qla2xxx/qla_os.c | 10 +++++++++-
3 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index e3256e721be14..ee54207fc5319 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -192,6 +192,7 @@ extern int ql2xsecenable;
extern int ql2xenforce_iocb_limit;
extern int ql2xabts_wait_nvme;
extern u32 ql2xnvme_queues;
+extern int ql2xfc2target;
extern int qla2x00_loop_reset(scsi_qla_host_t *);
extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int);
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 8f2a968793913..d506eb3a9b639 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1841,7 +1841,8 @@ void qla2x00_handle_rscn(scsi_qla_host_t *vha, struct event_arg *ea)
case RSCN_PORT_ADDR:
fcport = qla2x00_find_fcport_by_nportid(vha, &ea->id, 1);
if (fcport) {
- if (fcport->flags & FCF_FCP2_DEVICE &&
+ if (ql2xfc2target &&
+ fcport->flags & FCF_FCP2_DEVICE &&
atomic_read(&fcport->state) == FCS_ONLINE) {
ql_dbg(ql_dbg_disc, vha, 0x2115,
"Delaying session delete for FCP2 portid=%06x %8phC ",
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 2d86f804872bf..0dc50b1b3dde5 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -360,6 +360,13 @@ MODULE_PARM_DESC(ql2xnvme_queues,
"1 - Minimum number of queues supported\n"
"8 - Default value");
+int ql2xfc2target = 1;
+module_param(ql2xfc2target, int, 0444);
+MODULE_PARM_DESC(qla2xfc2target,
+ "Enables FC2 Target support. "
+ "0 - FC2 Target support is disabled. "
+ "1 - FC2 Target support is enabled (default).");
+
static struct scsi_transport_template *qla2xxx_transport_template = NULL;
struct scsi_transport_template *qla2xxx_transport_vport_template = NULL;
@@ -4075,7 +4082,8 @@ qla2x00_mark_all_devices_lost(scsi_qla_host_t *vha)
"Mark all dev lost\n");
list_for_each_entry(fcport, &vha->vp_fcports, list) {
- if (fcport->loop_id != FC_NO_LOOP_ID &&
+ if (ql2xfc2target &&
+ fcport->loop_id != FC_NO_LOOP_ID &&
(fcport->flags & FCF_FCP2_DEVICE) &&
fcport->port_type == FCT_TARGET &&
!qla2x00_reset_active(vha)) {
--
2.39.2
From: Al Viro <[email protected]>
[ Upstream commit 573b22ccb7ce9ab7f0539a2e11a9d3609a8783f5 ]
We fetch %SR value from sigframe; it might have been modified by signal
handler, so we can't trust it with any bits that are not modifiable in
user mode.
Signed-off-by: Al Viro <[email protected]>
Cc: Rich Felker <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/sh/include/asm/processor_32.h | 1 +
arch/sh/kernel/signal_32.c | 3 +++
2 files changed, 4 insertions(+)
diff --git a/arch/sh/include/asm/processor_32.h b/arch/sh/include/asm/processor_32.h
index 27aebf1e75a20..3ef7adf739c83 100644
--- a/arch/sh/include/asm/processor_32.h
+++ b/arch/sh/include/asm/processor_32.h
@@ -50,6 +50,7 @@
#define SR_FD 0x00008000
#define SR_MD 0x40000000
+#define SR_USER_MASK 0x00000303 // M, Q, S, T bits
/*
* DSP structure and data
*/
diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
index 90f495d35db29..a6bfc6f374911 100644
--- a/arch/sh/kernel/signal_32.c
+++ b/arch/sh/kernel/signal_32.c
@@ -115,6 +115,7 @@ static int
restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *r0_p)
{
unsigned int err = 0;
+ unsigned int sr = regs->sr & ~SR_USER_MASK;
#define COPY(x) err |= __get_user(regs->x, &sc->sc_##x)
COPY(regs[1]);
@@ -130,6 +131,8 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *r0_p
COPY(sr); COPY(pc);
#undef COPY
+ regs->sr = (regs->sr & SR_USER_MASK) | sr;
+
#ifdef CONFIG_SH_FPU
if (boot_cpu_data.flags & CPU_HAS_FPU) {
int owned_fp;
--
2.39.2
From: lyndonli <[email protected]>
[ Upstream commit 93bb18d2a873d2fa9625c8ea927723660a868b95 ]
On GPUs with RAS enabled, below call trace and hang are observed when
shutting down device.
v2: use DRM device unplugged flag instead of shutdown flag as the check to
prevent memory wipe in shutdown stage.
[ +0.000000] RIP: 0010:amdgpu_vram_mgr_fini+0x18d/0x1c0 [amdgpu]
[ +0.000001] PKRU: 55555554
[ +0.000001] Call Trace:
[ +0.000001] <TASK>
[ +0.000002] amdgpu_ttm_fini+0x140/0x1c0 [amdgpu]
[ +0.000183] amdgpu_bo_fini+0x27/0xa0 [amdgpu]
[ +0.000184] gmc_v11_0_sw_fini+0x2b/0x40 [amdgpu]
[ +0.000163] amdgpu_device_fini_sw+0xb6/0x510 [amdgpu]
[ +0.000152] amdgpu_driver_release_kms+0x16/0x30 [amdgpu]
[ +0.000090] drm_dev_release+0x28/0x50 [drm]
[ +0.000016] devm_drm_dev_init_release+0x38/0x60 [drm]
[ +0.000011] devm_action_release+0x15/0x20
[ +0.000003] release_nodes+0x40/0xc0
[ +0.000001] devres_release_all+0x9e/0xe0
[ +0.000001] device_unbind_cleanup+0x12/0x80
[ +0.000003] device_release_driver_internal+0xff/0x160
[ +0.000001] driver_detach+0x4a/0x90
[ +0.000001] bus_remove_driver+0x6c/0xf0
[ +0.000001] driver_unregister+0x31/0x50
[ +0.000001] pci_unregister_driver+0x40/0x90
[ +0.000003] amdgpu_exit+0x15/0x120 [amdgpu]
Signed-off-by: lyndonli <[email protected]>
Reviewed-by: Guchun Chen <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_object.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c
index 25a68d8888e0d..5d4649b8bfd33 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c
@@ -1315,7 +1315,7 @@ void amdgpu_bo_release_notify(struct ttm_buffer_object *bo)
if (!bo->resource || bo->resource->mem_type != TTM_PL_VRAM ||
!(abo->flags & AMDGPU_GEM_CREATE_VRAM_WIPE_ON_RELEASE) ||
- adev->in_suspend || adev->shutdown)
+ adev->in_suspend || drm_dev_is_unplugged(adev_to_drm(adev)))
return;
if (WARN_ON_ONCE(!dma_resv_trylock(bo->base.resv)))
--
2.39.2
From: Jakob Koschel <[email protected]>
[ Upstream commit 2850b23e9f9ae3696e472d2883ea1b43aafa884e ]
If the &epd_pool->list is empty when executing
lpfc_get_io_buf_from_expedite_pool() the function would return an invalid
pointer. Even in the case if the list is guaranteed to be populated, the
iterator variable should not be used after the loop to be more robust for
future changes.
Linus proposed to avoid any use of the list iterator variable after the
loop, in the attempt to move the list iterator variable declaration into
the macro to avoid any potential misuse after the loop [1].
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1]
Signed-off-by: Jakob Koschel <[email protected]>
Link: https://lore.kernel.org/r/20230301-scsi-lpfc-avoid-list-iterator-after-loop-v1-1-325578ae7561@gmail.com
Reviewed-by: Justin Tee <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/lpfc/lpfc_sli.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 3aa7206537de7..c0ddf55676a1f 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -21903,20 +21903,20 @@ lpfc_get_io_buf_from_private_pool(struct lpfc_hba *phba,
static struct lpfc_io_buf *
lpfc_get_io_buf_from_expedite_pool(struct lpfc_hba *phba)
{
- struct lpfc_io_buf *lpfc_ncmd;
+ struct lpfc_io_buf *lpfc_ncmd = NULL, *iter;
struct lpfc_io_buf *lpfc_ncmd_next;
unsigned long iflag;
struct lpfc_epd_pool *epd_pool;
epd_pool = &phba->epd_pool;
- lpfc_ncmd = NULL;
spin_lock_irqsave(&epd_pool->lock, iflag);
if (epd_pool->count > 0) {
- list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next,
+ list_for_each_entry_safe(iter, lpfc_ncmd_next,
&epd_pool->list, list) {
- list_del(&lpfc_ncmd->list);
+ list_del(&iter->list);
epd_pool->count--;
+ lpfc_ncmd = iter;
break;
}
}
--
2.39.2
From: Ranjan Kumar <[email protected]>
[ Upstream commit 5b06a7169c59ce0c77ef8b9c82aa07c478f82aac ]
Prevent driver from trying to dereference a NULL pointer in a debug print
while removing a device during driver unload.
Signed-off-by: Ranjan Kumar <[email protected]>
Signed-off-by: Sreekanth Reddy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/mpi3mr/mpi3mr_transport.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/mpi3mr/mpi3mr_transport.c b/drivers/scsi/mpi3mr/mpi3mr_transport.c
index 3b61815979dab..b795a325534d3 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_transport.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_transport.c
@@ -1552,7 +1552,8 @@ static void mpi3mr_sas_port_remove(struct mpi3mr_ioc *mrioc, u64 sas_address,
list_for_each_entry_safe(mr_sas_phy, next_phy,
&mr_sas_port->phy_list, port_siblings) {
- if ((mrioc->logging_level & MPI3_DEBUG_TRANSPORT_INFO))
+ if ((!mrioc->stop_drv_processing) &&
+ (mrioc->logging_level & MPI3_DEBUG_TRANSPORT_INFO))
dev_info(&mr_sas_port->port->dev,
"remove: sas_address(0x%016llx), phy(%d)\n",
(unsigned long long)
--
2.39.2
From: Ranjan Kumar <[email protected]>
[ Upstream commit 02ca7da2919ada525fb424640205110e24646b50 ]
As part of Task Management handling, the driver will disable and enable the
MSIx index zero which belongs to the Admin reply queue. During this
transition the driver loses some interrupts and this leads to Admin request
and ioctl timeouts.
After enabling the interrupts, poll the Admin reply queue to avoid
timeouts.
Signed-off-by: Ranjan Kumar <[email protected]>
Signed-off-by: Sreekanth Reddy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/mpi3mr/mpi3mr.h | 3 +++
drivers/scsi/mpi3mr/mpi3mr_fw.c | 12 ++++++++++--
drivers/scsi/mpi3mr/mpi3mr_os.c | 1 +
3 files changed, 14 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h
index 8a438f248a820..68f29ffb05b82 100644
--- a/drivers/scsi/mpi3mr/mpi3mr.h
+++ b/drivers/scsi/mpi3mr/mpi3mr.h
@@ -903,6 +903,7 @@ struct scmd_priv {
* @admin_reply_ephase:Admin reply queue expected phase
* @admin_reply_base: Admin reply queue base virtual address
* @admin_reply_dma: Admin reply queue base dma address
+ * @admin_reply_q_in_use: Queue is handled by poll/ISR
* @ready_timeout: Controller ready timeout
* @intr_info: Interrupt cookie pointer
* @intr_info_count: Number of interrupt cookies
@@ -1056,6 +1057,7 @@ struct mpi3mr_ioc {
u8 admin_reply_ephase;
void *admin_reply_base;
dma_addr_t admin_reply_dma;
+ atomic_t admin_reply_q_in_use;
u32 ready_timeout;
@@ -1391,4 +1393,5 @@ void mpi3mr_add_event_wait_for_device_refresh(struct mpi3mr_ioc *mrioc);
void mpi3mr_flush_drv_cmds(struct mpi3mr_ioc *mrioc);
void mpi3mr_flush_cmds_for_unrecovered_controller(struct mpi3mr_ioc *mrioc);
void mpi3mr_free_enclosure_list(struct mpi3mr_ioc *mrioc);
+int mpi3mr_process_admin_reply_q(struct mpi3mr_ioc *mrioc);
#endif /*MPI3MR_H_INCLUDED*/
diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index 758f7ca9e0ee8..4254e46a20f1a 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -415,7 +415,7 @@ static void mpi3mr_process_admin_reply_desc(struct mpi3mr_ioc *mrioc,
le64_to_cpu(scsi_reply->sense_data_buffer_address));
}
-static int mpi3mr_process_admin_reply_q(struct mpi3mr_ioc *mrioc)
+int mpi3mr_process_admin_reply_q(struct mpi3mr_ioc *mrioc)
{
u32 exp_phase = mrioc->admin_reply_ephase;
u32 admin_reply_ci = mrioc->admin_reply_ci;
@@ -423,12 +423,17 @@ static int mpi3mr_process_admin_reply_q(struct mpi3mr_ioc *mrioc)
u64 reply_dma = 0;
struct mpi3_default_reply_descriptor *reply_desc;
+ if (!atomic_add_unless(&mrioc->admin_reply_q_in_use, 1, 1))
+ return 0;
+
reply_desc = (struct mpi3_default_reply_descriptor *)mrioc->admin_reply_base +
admin_reply_ci;
if ((le16_to_cpu(reply_desc->reply_flags) &
- MPI3_REPLY_DESCRIPT_FLAGS_PHASE_MASK) != exp_phase)
+ MPI3_REPLY_DESCRIPT_FLAGS_PHASE_MASK) != exp_phase) {
+ atomic_dec(&mrioc->admin_reply_q_in_use);
return 0;
+ }
do {
if (mrioc->unrecoverable)
@@ -454,6 +459,7 @@ static int mpi3mr_process_admin_reply_q(struct mpi3mr_ioc *mrioc)
writel(admin_reply_ci, &mrioc->sysif_regs->admin_reply_queue_ci);
mrioc->admin_reply_ci = admin_reply_ci;
mrioc->admin_reply_ephase = exp_phase;
+ atomic_dec(&mrioc->admin_reply_q_in_use);
return num_admin_replies;
}
@@ -2605,6 +2611,7 @@ static int mpi3mr_setup_admin_qpair(struct mpi3mr_ioc *mrioc)
mrioc->admin_reply_ci = 0;
mrioc->admin_reply_ephase = 1;
mrioc->admin_reply_base = NULL;
+ atomic_set(&mrioc->admin_reply_q_in_use, 0);
if (!mrioc->admin_req_base) {
mrioc->admin_req_base = dma_alloc_coherent(&mrioc->pdev->dev,
@@ -4155,6 +4162,7 @@ void mpi3mr_memset_buffers(struct mpi3mr_ioc *mrioc)
memset(mrioc->admin_req_base, 0, mrioc->admin_req_q_sz);
if (mrioc->admin_reply_base)
memset(mrioc->admin_reply_base, 0, mrioc->admin_reply_q_sz);
+ atomic_set(&mrioc->admin_reply_q_in_use, 0);
if (mrioc->init_cmds.reply) {
memset(mrioc->init_cmds.reply, 0, sizeof(*mrioc->init_cmds.reply));
diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c
index 6eaeba41072cb..a794cc8a1c0b1 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_os.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_os.c
@@ -3720,6 +3720,7 @@ int mpi3mr_issue_tm(struct mpi3mr_ioc *mrioc, u8 tm_type,
mpi3mr_poll_pend_io_completions(mrioc);
mpi3mr_ioc_enable_intr(mrioc);
mpi3mr_poll_pend_io_completions(mrioc);
+ mpi3mr_process_admin_reply_q(mrioc);
}
switch (tm_type) {
case MPI3_SCSITASKMGMT_TASKTYPE_TARGET_RESET:
--
2.39.2
From: Ranjan Kumar <[email protected]>
[ Upstream commit 0a319f1629495d27879b7ebf6eee62b8cf6e4c37 ]
If a controller reset operation is triggered to recover the controller from
a fault state, then wait for the snapdump to be saved in the firmware
region before proceeding to reset the controller.
Signed-off-by: Ranjan Kumar <[email protected]>
Signed-off-by: Sreekanth Reddy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/mpi3mr/mpi3mr_fw.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c
index 4254e46a20f1a..fa903a70baac8 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_fw.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c
@@ -1198,7 +1198,7 @@ mpi3mr_revalidate_factsdata(struct mpi3mr_ioc *mrioc)
*/
static int mpi3mr_bring_ioc_ready(struct mpi3mr_ioc *mrioc)
{
- u32 ioc_config, ioc_status, timeout;
+ u32 ioc_config, ioc_status, timeout, host_diagnostic;
int retval = 0;
enum mpi3mr_iocstate ioc_state;
u64 base_info;
@@ -1252,6 +1252,23 @@ static int mpi3mr_bring_ioc_ready(struct mpi3mr_ioc *mrioc)
retval, mpi3mr_iocstate_name(ioc_state));
}
if (ioc_state != MRIOC_STATE_RESET) {
+ if (ioc_state == MRIOC_STATE_FAULT) {
+ timeout = MPI3_SYSIF_DIAG_SAVE_TIMEOUT * 10;
+ mpi3mr_print_fault_info(mrioc);
+ do {
+ host_diagnostic =
+ readl(&mrioc->sysif_regs->host_diagnostic);
+ if (!(host_diagnostic &
+ MPI3_SYSIF_HOST_DIAG_SAVE_IN_PROGRESS))
+ break;
+ if (!pci_device_is_present(mrioc->pdev)) {
+ mrioc->unrecoverable = 1;
+ ioc_err(mrioc, "controller is not present at the bringup\n");
+ goto out_device_not_present;
+ }
+ msleep(100);
+ } while (--timeout);
+ }
mpi3mr_print_fault_info(mrioc);
ioc_info(mrioc, "issuing soft reset to bring to reset state\n");
retval = mpi3mr_issue_reset(mrioc,
--
2.39.2
From: Srinivas Pandruvada <[email protected]>
[ Upstream commit 95ecf90158522269749f1b7ce98b1eed66ca087b ]
A new command CONFIG_TDP_GET_RATIO_INFO is added, with sub command type
of 0x0C. The previous range of valid sub commands was from 0x00 to 0x0B.
Change the valid range from 0x00 to 0x0C.
Signed-off-by: Srinivas Pandruvada <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/intel/speed_select_if/isst_if_common.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/platform/x86/intel/speed_select_if/isst_if_common.c b/drivers/platform/x86/intel/speed_select_if/isst_if_common.c
index a7e02b24a87ad..0829e793a8fce 100644
--- a/drivers/platform/x86/intel/speed_select_if/isst_if_common.c
+++ b/drivers/platform/x86/intel/speed_select_if/isst_if_common.c
@@ -47,7 +47,7 @@ struct isst_cmd_set_req_type {
static const struct isst_valid_cmd_ranges isst_valid_cmds[] = {
{0xD0, 0x00, 0x03},
- {0x7F, 0x00, 0x0B},
+ {0x7F, 0x00, 0x0C},
{0x7F, 0x10, 0x12},
{0x7F, 0x20, 0x23},
{0x94, 0x03, 0x03},
--
2.39.2
From: Michael Kelley <[email protected]>
[ Upstream commit 11d9874c4204a785f43d899a1ab12f9dc8d9de3e ]
Hyper-V uses a VHD or VHDX file on the host as the underlying storage for a
virtual disk. The VHD/VHDX file format is a sparse format where real disk
space on the host is assigned in chunks that the VHD/VHDX file format calls
the BlockSize. This BlockSize is not to be confused with the 512-byte (or
4096-byte) sector size of the underlying storage device. The default block
size for a new VHD/VHDX file is 32 Mbytes. When a guest VM touches any
disk space within a 32 Mbyte chunk of the VHD/VHDX file, Hyper-V allocates
32 Mbytes of real disk space for that section of the VHD/VHDX. Similarly,
if a discard operation is done that covers an entire 32 Mbyte chunk,
Hyper-V will free the real disk space for that portion of the VHD/VHDX.
This BlockSize is surfaced in Linux as the "discard_granularity" in
/sys/block/sd<x>/queue, which makes sense.
Hyper-V also has differencing disks that can overlay a VHD/VHDX file to
capture changes to the VHD/VHDX while preserving the original VHD/VHDX.
One example of this differencing functionality is for VM snapshots. When a
snapshot is created, a differencing disk is created. If the snapshot is
rolled back, Hyper-V can just delete the differencing disk, and the VM will
see the original disk contents at the time the snapshot was taken.
Differencing disks are used in other scenarios as well.
The BlockSize for a differencing disk defaults to 2 Mbytes, not 32 Mbytes.
The smaller default is used because changes to differencing disks are
typically scattered all over, and Hyper-V doesn't want to allocate 32
Mbytes of real disk space for a stray write here or there. The smaller
BlockSize provides more efficient use of real disk space.
When a differencing disk is added to a VHD/VHDX, Hyper-V reports
UNIT_ATTENTION with a sense code indicating "Operating parameters have
changed", because the value of discard_granularity should be changed to 2
Mbytes. When the differencing disk is removed, discard_granularity should
be changed back to 32 Mbytes. However, current code simply reports a
message from scsi_report_sense() and the value of
/sys/block/sd<x>/queue/discard_granularity is not updated. The message
isn't very actionable by a sysadmin.
Fix this by having the storvsc driver check for the sense code indicating
that the underly VHD/VHDX block size has changed, and do a rescan of the
device to pick up the new discard_granularity. With this change the entire
transition to/from differencing disks is handled automatically and
transparently, with no confusing messages being output.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael Kelley <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/storvsc_drv.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 22705eb781b0e..2bf25e80b29a8 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -987,6 +987,22 @@ static void storvsc_handle_error(struct vmscsi_request *vm_srb,
goto do_work;
}
+ /*
+ * Check for "Operating parameters have changed"
+ * due to Hyper-V changing the VHD/VHDX BlockSize
+ * when adding/removing a differencing disk. This
+ * causes discard_granularity to change, so do a
+ * rescan to pick up the new granularity. We don't
+ * want scsi_report_sense() to output a message
+ * that a sysadmin wouldn't know what to do with.
+ */
+ if ((asc == 0x3f) && (ascq != 0x03) &&
+ (ascq != 0x0e)) {
+ process_err_fn = storvsc_device_scan;
+ set_host_byte(scmnd, DID_REQUEUE);
+ goto do_work;
+ }
+
/*
* Otherwise, let upper layer deal with the
* error when sense message is present
--
2.39.2
From: Daniel Scally <[email protected]>
[ Upstream commit e8059d393158e927e36898aca89986a52025b9f3 ]
Add the INT347E GPIO lookup table to the board data for the Surface
Go 3. This is necessary to allow the ov7251 IR camera to probe
properly on that platform.
Signed-off-by: Daniel Scally <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/intel/int3472/tps68470_board_data.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/platform/x86/intel/int3472/tps68470_board_data.c b/drivers/platform/x86/intel/int3472/tps68470_board_data.c
index 309eab9c05588..322237e056f32 100644
--- a/drivers/platform/x86/intel/int3472/tps68470_board_data.c
+++ b/drivers/platform/x86/intel/int3472/tps68470_board_data.c
@@ -159,9 +159,10 @@ static const struct int3472_tps68470_board_data surface_go_tps68470_board_data =
static const struct int3472_tps68470_board_data surface_go3_tps68470_board_data = {
.dev_name = "i2c-INT3472:01",
.tps68470_regulator_pdata = &surface_go_tps68470_pdata,
- .n_gpiod_lookups = 1,
+ .n_gpiod_lookups = 2,
.tps68470_gpio_lookup_tables = {
- &surface_go_int347a_gpios
+ &surface_go_int347a_gpios,
+ &surface_go_int347e_gpios,
},
};
--
2.39.2
From: Enrico Sau <[email protected]>
[ Upstream commit 382e363d5bed0cec5807b35761d14e55955eee63 ]
Add the following Telit FE990 composition:
0x1080: tty, adb, rmnet, tty, tty, tty, tty
Signed-off-by: Enrico Sau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/qmi_wwan.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index a808d718c0123..571e37e67f9ce 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1364,6 +1364,7 @@ static const struct usb_device_id products[] = {
{QMI_QUIRK_SET_DTR(0x1bc7, 0x1057, 2)}, /* Telit FN980 */
{QMI_QUIRK_SET_DTR(0x1bc7, 0x1060, 2)}, /* Telit LN920 */
{QMI_QUIRK_SET_DTR(0x1bc7, 0x1070, 2)}, /* Telit FN990 */
+ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1080, 2)}, /* Telit FE990 */
{QMI_FIXED_INTF(0x1bc7, 0x1100, 3)}, /* Telit ME910 */
{QMI_FIXED_INTF(0x1bc7, 0x1101, 3)}, /* Telit ME910 dual modem */
{QMI_FIXED_INTF(0x1bc7, 0x1200, 5)}, /* Telit LE920 */
--
2.39.2
From: Enrico Sau <[email protected]>
[ Upstream commit 418383e6ed6b4624a54ec05c535f13d184fbf33b ]
Add quirk CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE for Telit FE990
0x1081 composition in order to avoid bind error.
Signed-off-by: Enrico Sau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/cdc_mbim.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/usb/cdc_mbim.c b/drivers/net/usb/cdc_mbim.c
index c89639381eca3..cd4083e0b3b9e 100644
--- a/drivers/net/usb/cdc_mbim.c
+++ b/drivers/net/usb/cdc_mbim.c
@@ -665,6 +665,11 @@ static const struct usb_device_id mbim_devs[] = {
.driver_info = (unsigned long)&cdc_mbim_info_avoid_altsetting_toggle,
},
+ /* Telit FE990 */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x1bc7, 0x1081, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long)&cdc_mbim_info_avoid_altsetting_toggle,
+ },
+
/* default entry */
{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
.driver_info = (unsigned long)&cdc_mbim_info_zlp,
--
2.39.2
From: Mario Limonciello <[email protected]>
[ Upstream commit 1717cc5f2962a4652c76ed3858b499ccae6c277c ]
The same strapping initialization issue that happened on NBIO 7.5.1
appears to be happening on NBIO 7.3.0.
Apply the same fix to 7.3.0 as well.
Note: This workaround relies upon the integrated GPU being enabled
in BIOS. If the integrated GPU is disabled in BIOS a different
workaround will be required.
Reported-by: Thomas Glanzmann <[email protected]>
Cc: Basavaraj Natikar <[email protected]>
Link: https://lore.kernel.org/linux-usb/Y%[email protected]/T/#u
Signed-off-by: Mario Limonciello <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/nbio_v7_2.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/nbio_v7_2.c b/drivers/gpu/drm/amd/amdgpu/nbio_v7_2.c
index 4b0d563c6522c..4ef1fa4603c8e 100644
--- a/drivers/gpu/drm/amd/amdgpu/nbio_v7_2.c
+++ b/drivers/gpu/drm/amd/amdgpu/nbio_v7_2.c
@@ -382,11 +382,6 @@ static void nbio_v7_2_init_registers(struct amdgpu_device *adev)
if (def != data)
WREG32_PCIE_PORT(SOC15_REG_OFFSET(NBIO, 0, regBIF1_PCIE_MST_CTRL_3), data);
break;
- case IP_VERSION(7, 5, 1):
- data = RREG32_SOC15(NBIO, 0, regRCC_DEV2_EPF0_STRAP2);
- data &= ~RCC_DEV2_EPF0_STRAP2__STRAP_NO_SOFT_RESET_DEV2_F0_MASK;
- WREG32_SOC15(NBIO, 0, regRCC_DEV2_EPF0_STRAP2, data);
- fallthrough;
default:
def = data = RREG32_PCIE_PORT(SOC15_REG_OFFSET(NBIO, 0, regPCIE_CONFIG_CNTL));
data = REG_SET_FIELD(data, PCIE_CONFIG_CNTL,
@@ -399,6 +394,15 @@ static void nbio_v7_2_init_registers(struct amdgpu_device *adev)
break;
}
+ switch (adev->ip_versions[NBIO_HWIP][0]) {
+ case IP_VERSION(7, 3, 0):
+ case IP_VERSION(7, 5, 1):
+ data = RREG32_SOC15(NBIO, 0, regRCC_DEV2_EPF0_STRAP2);
+ data &= ~RCC_DEV2_EPF0_STRAP2__STRAP_NO_SOFT_RESET_DEV2_F0_MASK;
+ WREG32_SOC15(NBIO, 0, regRCC_DEV2_EPF0_STRAP2, data);
+ break;
+ }
+
if (amdgpu_sriov_vf(adev))
adev->rmmio_remap.reg_offset = SOC15_REG_OFFSET(NBIO, 0,
regBIF_BX_PF0_HDP_MEM_COHERENCY_FLUSH_CNTL) << 2;
--
2.39.2
From: Swapnil Patel <[email protected]>
[ Upstream commit 2d99a7ec25cf456cd3680eb314d6454138e5aa64 ]
[Why]
Currently, the clk manager matches SocVoltage with voltage from
fused settings (dfPstate clock table). And then corresponding clocks
are selected.
However in certain situations, this leads to clk manager not
including at least one entry with highest supported clock setting.
[How]
Update the clk manager to include at least one entry with highest
supported clock setting.
Reviewed-by: Pavle Kotarac <[email protected]>
Acked-by: Qingqing Zhuo <[email protected]>
Signed-off-by: Swapnil Patel <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../display/dc/clk_mgr/dcn301/vg_clk_mgr.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn301/vg_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn301/vg_clk_mgr.c
index 24715ca2fa944..01383aac6b419 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn301/vg_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn301/vg_clk_mgr.c
@@ -529,6 +529,19 @@ static struct clk_bw_params vg_bw_params = {
};
+static uint32_t find_max_clk_value(const uint32_t clocks[], uint32_t num_clocks)
+{
+ uint32_t max = 0;
+ int i;
+
+ for (i = 0; i < num_clocks; ++i) {
+ if (clocks[i] > max)
+ max = clocks[i];
+ }
+
+ return max;
+}
+
static unsigned int find_dcfclk_for_voltage(const struct vg_dpm_clocks *clock_table,
unsigned int voltage)
{
@@ -572,12 +585,16 @@ static void vg_clk_mgr_helper_populate_bw_params(
bw_params->clk_table.num_entries = j + 1;
- for (i = 0; i < bw_params->clk_table.num_entries; i++, j--) {
+ for (i = 0; i < bw_params->clk_table.num_entries - 1; i++, j--) {
bw_params->clk_table.entries[i].fclk_mhz = clock_table->DfPstateTable[j].fclk;
bw_params->clk_table.entries[i].memclk_mhz = clock_table->DfPstateTable[j].memclk;
bw_params->clk_table.entries[i].voltage = clock_table->DfPstateTable[j].voltage;
bw_params->clk_table.entries[i].dcfclk_mhz = find_dcfclk_for_voltage(clock_table, clock_table->DfPstateTable[j].voltage);
}
+ bw_params->clk_table.entries[i].fclk_mhz = clock_table->DfPstateTable[j].fclk;
+ bw_params->clk_table.entries[i].memclk_mhz = clock_table->DfPstateTable[j].memclk;
+ bw_params->clk_table.entries[i].voltage = clock_table->DfPstateTable[j].voltage;
+ bw_params->clk_table.entries[i].dcfclk_mhz = find_max_clk_value(clock_table->DcfClocks, VG_NUM_DCFCLK_DPM_LEVELS);
bw_params->vram_type = bios_info->memory_type;
bw_params->num_channels = bios_info->ma_channel_number;
--
2.39.2
From: Ranjan Kumar <[email protected]>
[ Upstream commit 4f297e856a7b5da2f2c66a12e739666e23943560 ]
A wrong variable is checked while populating PRP entries in the PRP page
and this results in failure. No PRP entries in the PRP page were
successfully created and any NVMe Encapsulated commands with PRP of size
greater than 8K failed.
Signed-off-by: Ranjan Kumar <[email protected]>
Signed-off-by: Sreekanth Reddy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/mpi3mr/mpi3mr_app.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/mpi3mr/mpi3mr_app.c b/drivers/scsi/mpi3mr/mpi3mr_app.c
index bff6377023979..d10c6afb7f9cd 100644
--- a/drivers/scsi/mpi3mr/mpi3mr_app.c
+++ b/drivers/scsi/mpi3mr/mpi3mr_app.c
@@ -886,7 +886,7 @@ static int mpi3mr_build_nvme_prp(struct mpi3mr_ioc *mrioc,
* each time through the loop.
*/
*prp_entry = cpu_to_le64(dma_addr);
- if (*prp1_entry & sgemod_mask) {
+ if (*prp_entry & sgemod_mask) {
dprint_bsg_err(mrioc,
"%s: PRP address collides with SGE modifier\n",
__func__);
@@ -895,7 +895,7 @@ static int mpi3mr_build_nvme_prp(struct mpi3mr_ioc *mrioc,
*prp_entry &= ~sgemod_mask;
*prp_entry |= sgemod_val;
prp_entry++;
- prp_entry_dma++;
+ prp_entry_dma += prp_size;
}
/*
--
2.39.2
On Sun, Mar 19, 2023 at 5:53 PM Sasha Levin <[email protected]> wrote:
>
> [ Upstream commit 8ca09d5fa3549d142c2080a72a4c70ce389163cd ]
These are technically real fixes, but they are really just "documented
behavior" fixes, and don't actually matter unless you also have
596ff4a09b89 ("cpumask: re-introduce constant-sized cpumask
optimizations"), which doesn't look like stable material.
And if somebody *does* decide to backport commit 596ff4a09b89, you
should then backport all of
6015b1aca1a2 sched_getaffinity: don't assume 'cpumask_size()' is
fully initialized
e7304080e0e5 cpumask: relax sanity checking constraints
63355b9884b3 cpumask: be more careful with 'cpumask_setall()'
8ca09d5fa354 cpumask: fix incorrect cpumask scanning result checks
but again, none of these matter as long as the constant-sized cpumask
optimized case doesn't exist.
(Technically, FORCE_NR_CPUS also does the constant-size optimizations
even before, but that will complain loudly if that constant size then
doesn't match nr_cpu_ids, so ..).
Linus
On Mon, Mar 20, 2023 at 12:53 AM Sasha Levin <[email protected]> wrote:
>
> From: Lorenz Bauer <[email protected]>
>
> [ Upstream commit dfdd608c3b365f0fd49d7e13911ebcde06b9865b ]
>
> Add a regression test that ensures that a VAR pointing at a
> modifier which follows a PTR (or STRUCT or ARRAY) is resolved
> correctly by the datasec validator.
>
> Signed-off-by: Lorenz Bauer <[email protected]>
> Link: https://lore.kernel.org/r/[email protected]
> Signed-off-by: Martin KaFai Lau <[email protected]>
> Signed-off-by: Sasha Levin <[email protected]>
Hi Sasha,
Can you explain why this patch was selected? I'd prefer to not
backport the test, since it frequently leads to breakage when trying
to build selftests/bpf on stable kernels.
Thanks
Lorenz
On Mon, Mar 20, 2023 at 03:31:42PM +0000, Lorenz Bauer wrote:
> On Mon, Mar 20, 2023 at 12:53 AM Sasha Levin <[email protected]> wrote:
> >
> > From: Lorenz Bauer <[email protected]>
> >
> > [ Upstream commit dfdd608c3b365f0fd49d7e13911ebcde06b9865b ]
> >
> > Add a regression test that ensures that a VAR pointing at a
> > modifier which follows a PTR (or STRUCT or ARRAY) is resolved
> > correctly by the datasec validator.
> >
> > Signed-off-by: Lorenz Bauer <[email protected]>
> > Link: https://lore.kernel.org/r/[email protected]
> > Signed-off-by: Martin KaFai Lau <[email protected]>
> > Signed-off-by: Sasha Levin <[email protected]>
>
> Hi Sasha,
>
> Can you explain why this patch was selected? I'd prefer to not
> backport the test, since it frequently leads to breakage when trying
> to build selftests/bpf on stable kernels.
Why would it break? Is that because the test is buggy, or the kernel is
buggy?
thanks,
greg k-h
On Mon, Mar 20, 2023 at 3:48 PM Greg KH <[email protected]> wrote:
>
> Why would it break? Is that because the test is buggy, or the kernel is
> buggy?
This test will be fine, but there have been several times when
selftests/bpf for stable kernel releases didn't actually compile due
to backported tests. This is because macros we're redefined, etc.
Unless those also get picked (seems like a sisyphean task) we'll keep
seeing broken selftests/bpf on stable.
Best
Lorenz
On Tue, Mar 28, 2023 at 11:18 AM Lorenz Bauer <[email protected]> wrote:
>
> On Mon, Mar 20, 2023 at 3:48 PM Greg KH <[email protected]> wrote:
> >
> > Why would it break? Is that because the test is buggy, or the kernel is
> > buggy?
>
> This test will be fine, but there have been several times when
> selftests/bpf for stable kernel releases didn't actually compile due
> to backported tests. This is because macros we're redefined, etc.
> Unless those also get picked (seems like a sisyphean task) we'll keep
> seeing broken selftests/bpf on stable.
Hi Greg, Sasha,
Following up on this since it seems to have fallen through the cracks.
Lorenz
On Tue, Apr 11, 2023 at 04:08:32PM +0100, Lorenz Bauer wrote:
> On Tue, Mar 28, 2023 at 11:18 AM Lorenz Bauer <[email protected]> wrote:
> >
> > On Mon, Mar 20, 2023 at 3:48 PM Greg KH <[email protected]> wrote:
> > >
> > > Why would it break? Is that because the test is buggy, or the kernel is
> > > buggy?
> >
> > This test will be fine, but there have been several times when
> > selftests/bpf for stable kernel releases didn't actually compile due
> > to backported tests. This is because macros we're redefined, etc.
> > Unless those also get picked (seems like a sisyphean task) we'll keep
> > seeing broken selftests/bpf on stable.
>
> Hi Greg, Sasha,
>
> Following up on this since it seems to have fallen through the cracks.
I didn't see anything to do here.
And selftests should NOT be broken on stable releases, if so, something
is wrong as no other subsystem has that happen.
confused,
greg k-h
On Tue, Apr 11, 2023 at 4:14 PM Greg KH <[email protected]> wrote:
>
> I didn't see anything to do here.
>
> And selftests should NOT be broken on stable releases, if so, something
> is wrong as no other subsystem has that happen.
Sorry for the long delay in replying, I update the kernels we use for
CI only infrequently. Here is an example of the build failure I'm
seeing, from kernel.org 5.10 LTS:
In file included from
/work/build/5.10.180/tools/testing/selftests/bpf/verifier/tests.h:59,
from test_verifier.c:355:
/work/build/5.10.180/tools/testing/selftests/bpf/verifier/ref_tracking.c:935:3:
error: 'struct bpf_test' has no member named 'fixup_map_ringbuf'; did
you mean 'fixup_map_in_map'?
935 | .fixup_map_ringbuf = { 11 },
| ^~~~~~~~~~~~~~~~~
| fixup_map_in_map
This is just doing make -C tools/testing/selftests/bpf after compiling a kernel.
Best
Lorenz
On Wed, May 24, 2023 at 12:03:43PM +0100, Lorenz Bauer wrote:
> On Tue, Apr 11, 2023 at 4:14 PM Greg KH <[email protected]> wrote:
> >
> > I didn't see anything to do here.
> >
> > And selftests should NOT be broken on stable releases, if so, something
> > is wrong as no other subsystem has that happen.
>
> Sorry for the long delay in replying, I update the kernels we use for
> CI only infrequently. Here is an example of the build failure I'm
> seeing, from kernel.org 5.10 LTS:
>
> In file included from
> /work/build/5.10.180/tools/testing/selftests/bpf/verifier/tests.h:59,
> from test_verifier.c:355:
> /work/build/5.10.180/tools/testing/selftests/bpf/verifier/ref_tracking.c:935:3:
> error: 'struct bpf_test' has no member named 'fixup_map_ringbuf'; did
> you mean 'fixup_map_in_map'?
> 935 | .fixup_map_ringbuf = { 11 },
> | ^~~~~~~~~~~~~~~~~
> | fixup_map_in_map
>
> This is just doing make -C tools/testing/selftests/bpf after compiling a kernel.
Great, any specific commits that fix this issue would be appreciated to
be pointed at so we can apply them.
thanks,
greg k-h
On Wed, May 24, 2023 at 5:04 PM Greg KH <[email protected]> wrote:
>
> Great, any specific commits that fix this issue would be appreciated to
> be pointed at so we can apply them.
The problem was introduced by commit f4b8c0710ab6 ("selftests/bpf: Add
verifier test for release_reference()") in your tree. Seems like
fixup_map_ringbuf was introduced in upstream commit 4237e9f4a962
("selftests/bpf: Add verifier test for PTR_TO_MEM spill") but that
wasn't backported.
To restate my original question: how can we avoid breaking BPF
selftests? From personal experience this happens somewhat regularly.
Best
Lorenz
On Wed, May 24, 2023 at 06:04:43PM +0100, Lorenz Bauer wrote:
> On Wed, May 24, 2023 at 5:04 PM Greg KH <[email protected]> wrote:
> >
> > Great, any specific commits that fix this issue would be appreciated to
> > be pointed at so we can apply them.
>
> The problem was introduced by commit f4b8c0710ab6 ("selftests/bpf: Add
> verifier test for release_reference()") in your tree. Seems like
> fixup_map_ringbuf was introduced in upstream commit 4237e9f4a962
> ("selftests/bpf: Add verifier test for PTR_TO_MEM spill") but that
> wasn't backported.
So what tree(s) does this need to be backported to? I'm confused, this
is a 6.2 email thread which is long end-of-life.
> To restate my original question: how can we avoid breaking BPF
> selftests? From personal experience this happens somewhat regularly.
It can be avoided by people testing and letting me know when things
break :)
thanks,
greg k-h
On Fri, May 26, 2023 at 6:43 PM Greg KH <[email protected]> wrote:
>
> So what tree(s) does this need to be backported to? I'm confused, this
> is a 6.2 email thread which is long end-of-life.
That would be 5.10 from what I can tell. Other LTS kernels have
working tools/testing/selftests/bpf.
I replied here because you asked for examples :)
> It can be avoided by people testing and letting me know when things
> break :)
Fair enough. Earlier you said:
> And selftests should NOT be broken on stable releases, if so, something
> is wrong as no other subsystem has that happen.
Why is bpf special in this regard then?
Best
Lorenz