This patch will let hid-microsoft handle the Microsoft Sidewinder X4 and X6 keyboards.
Signed-off-by: Tolga Cakir <[email protected]>
---
drivers/hid/hid-core.c | 2 +
drivers/hid/hid-ids.h | 2 +
drivers/hid/hid-microsoft.c | 114 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 118 insertions(+)
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index dbe548b..5de5ba1 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1815,6 +1815,8 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD_BOOTLOADER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_COMFORT_MOUSE_4500) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_X6) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_X4) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE4K) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE4K_JP) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_LK6K) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 548c1a5..21be65d 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -626,6 +626,8 @@
#define USB_DEVICE_ID_MS_PRESENTER_8K_BT 0x0701
#define USB_DEVICE_ID_MS_PRESENTER_8K_USB 0x0713
#define USB_DEVICE_ID_MS_DIGITAL_MEDIA_3K 0x0730
+#define USB_DEVICE_ID_SIDEWINDER_X6 0x074b
+#define USB_DEVICE_ID_SIDEWINDER_X4 0x0768
#define USB_DEVICE_ID_MS_COMFORT_MOUSE_4500 0x076c
#define USB_DEVICE_ID_MS_TOUCH_COVER_2 0x07a7
#define USB_DEVICE_ID_MS_TYPE_COVER_2 0x07a9
diff --git a/drivers/hid/hid-microsoft.c b/drivers/hid/hid-microsoft.c
index 0a61403..5b5d40f 100644
--- a/drivers/hid/hid-microsoft.c
+++ b/drivers/hid/hid-microsoft.c
@@ -29,12 +29,28 @@
#define MS_NOGET 0x10
#define MS_DUPLICATE_USAGES 0x20
#define MS_RDESC_3K 0x40
+#define MS_SIDEWINDER 0x80
struct ms_data {
unsigned long quirks;
void *extra;
};
+/*
+ * For Sidewinder X4 / X6 devices.
+ * @profile: for storing profile status.
+ * @status: holds information about LED states and numpad mode (X6
+ * only). The 1st bit is for numpad mode, bits 2 - 7 are reserved for
+ * LED configuration and the last bit is currently unused.
+ * @key_mask: holds information about pressed special keys. It's
+ * readable via sysfs, so user-space tools can handle keys.
+ */
+struct ms_sidewinder_extra {
+ unsigned profile;
+ __u8 status;
+ unsigned long key_mask;
+};
+
static __u8 *ms_report_fixup(struct hid_device *hdev, __u8 *rdesc,
unsigned int *rsize)
{
@@ -143,6 +159,56 @@ static int ms_presenter_8k_quirk(struct hid_input *hi, struct hid_usage *usage,
return 1;
}
+static int ms_sidewinder_kb_quirk(struct hid_input *hi, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ set_bit(EV_REP, hi->input->evbit);
+ switch (usage->hid & HID_USAGE) {
+ /*
+ * Registering Sidewinder X4 / X6 special keys. S1 - S6 macro keys
+ * are shared between Sidewinder X4 & X6 and are programmable.
+ */
+ case 0xfb01: ms_map_key_clear(KEY_UNKNOWN); break; /* S1 */
+ case 0xfb02: ms_map_key_clear(KEY_UNKNOWN); break; /* S2 */
+ case 0xfb03: ms_map_key_clear(KEY_UNKNOWN); break; /* S3 */
+ case 0xfb04: ms_map_key_clear(KEY_UNKNOWN); break; /* S4 */
+ case 0xfb05: ms_map_key_clear(KEY_UNKNOWN); break; /* S5 */
+ case 0xfb06: ms_map_key_clear(KEY_UNKNOWN); break; /* S6 */
+ /* S7 - S30 macro keys are only present on the Sidewinder X6 */
+ case 0xfb07: ms_map_key_clear(KEY_UNKNOWN); break; /* S7 */
+ case 0xfb08: ms_map_key_clear(KEY_UNKNOWN); break; /* S8 */
+ case 0xfb09: ms_map_key_clear(KEY_UNKNOWN); break; /* S9 */
+ case 0xfb0a: ms_map_key_clear(KEY_UNKNOWN); break; /* S10 */
+ case 0xfb0b: ms_map_key_clear(KEY_UNKNOWN); break; /* S11 */
+ case 0xfb0c: ms_map_key_clear(KEY_UNKNOWN); break; /* S12 */
+ case 0xfb0d: ms_map_key_clear(KEY_UNKNOWN); break; /* S13 */
+ case 0xfb0e: ms_map_key_clear(KEY_UNKNOWN); break; /* S14 */
+ case 0xfb0f: ms_map_key_clear(KEY_UNKNOWN); break; /* S15 */
+ case 0xfb10: ms_map_key_clear(KEY_UNKNOWN); break; /* S16 */
+ case 0xfb11: ms_map_key_clear(KEY_UNKNOWN); break; /* S17 */
+ case 0xfb12: ms_map_key_clear(KEY_UNKNOWN); break; /* S18 */
+ case 0xfb13: ms_map_key_clear(KEY_UNKNOWN); break; /* S19 */
+ case 0xfb14: ms_map_key_clear(KEY_UNKNOWN); break; /* S20 */
+ case 0xfb15: ms_map_key_clear(KEY_UNKNOWN); break; /* S21 */
+ case 0xfb16: ms_map_key_clear(KEY_UNKNOWN); break; /* S22 */
+ case 0xfb17: ms_map_key_clear(KEY_UNKNOWN); break; /* S23 */
+ case 0xfb18: ms_map_key_clear(KEY_UNKNOWN); break; /* S24 */
+ case 0xfb19: ms_map_key_clear(KEY_UNKNOWN); break; /* S25 */
+ case 0xfb1a: ms_map_key_clear(KEY_UNKNOWN); break; /* S26 */
+ case 0xfb1b: ms_map_key_clear(KEY_UNKNOWN); break; /* S27 */
+ case 0xfb1c: ms_map_key_clear(KEY_UNKNOWN); break; /* S28 */
+ case 0xfb1d: ms_map_key_clear(KEY_UNKNOWN); break; /* S29 */
+ case 0xfb1e: ms_map_key_clear(KEY_UNKNOWN); break; /* S30 */
+ /* Not programmable keys: Profile, Game Center (X6 only) and Macro */
+ case 0xfd11: ms_map_key_clear(KEY_GAMES); break; /* X6: Game Center*/
+ case 0xfd12: ms_map_key_clear(KEY_MACRO); break; /* Macro */
+ case 0xfd15: ms_map_key_clear(KEY_UNKNOWN); break; /* Profile */
+ default:
+ return 0;
+ }
+ return 1;
+}
+
static int ms_input_mapping(struct hid_device *hdev, struct hid_input *hi,
struct hid_field *field, struct hid_usage *usage,
unsigned long **bit, int *max)
@@ -159,6 +225,10 @@ static int ms_input_mapping(struct hid_device *hdev, struct hid_input *hi,
ms_presenter_8k_quirk(hi, usage, bit, max))
return 1;
+ if ((sc->quirks & MS_SIDEWINDER) &&
+ ms_sidewinder_kb_quirk(hi, usage, bit, max))
+ return 1;
+
return 0;
}
@@ -229,6 +299,34 @@ static int ms_event(struct hid_device *hdev, struct hid_field *field,
return 1;
}
+ /*
+ * Sidewinder special button handling & profile switching
+ *
+ * Pressing S1 - S30 macro keys will not send out any keycodes, but
+ * set bits on key_mask (readable via sysfs). It's possible to press
+ * multiple special keys at the same time.
+ */
+ if (sc->quirks & MS_SIDEWINDER) {
+ struct input_dev *input = field->hidinput->input;
+ struct ms_sidewinder_extra *sidewinder = sc->extra;
+ int i;
+
+ for (i = 0; i <= 29; i++) { /* Run through S1 - S30 keys */
+ if ((usage->hid & HID_USAGE) == (0xfb01 + i)) {
+ value ? set_bit(i, &sidewinder->key_mask) : clear_bit(i, &sidewinder->key_mask);
+ break; /* Exit loop, when correct hid usage has been found */
+ }
+ }
+
+ switch (usage->hid & HID_USAGE) {
+ case 0xfd11: input_event(input, usage->type, KEY_GAMES, value); break;
+ case 0xfd12: input_event(input, usage->type, KEY_MACRO, value); break;
+ case 0xfd15: value ? set_bit(30, &sidewinder->key_mask) : clear_bit(30, &sidewinder->key_mask); break;
+ }
+
+ return 1;
+ }
+
return 0;
}
@@ -249,6 +347,18 @@ static int ms_probe(struct hid_device *hdev, const struct hid_device_id *id)
if (sc->quirks & MS_NOGET)
hdev->quirks |= HID_QUIRK_NOGET;
+ if (sc->quirks & MS_SIDEWINDER) {
+ struct ms_sidewinder_extra *sidewinder;
+
+ sidewinder = devm_kzalloc(&hdev->dev, sizeof(struct ms_sidewinder_extra),
+ GFP_KERNEL);
+ if (!sidewinder) {
+ hid_err(hdev, "can't alloc microsoft descriptor\n");
+ return -ENOMEM;
+ }
+ sc->extra = sidewinder;
+ }
+
ret = hid_parse(hdev);
if (ret) {
hid_err(hdev, "parse failed\n");
@@ -270,6 +380,10 @@ err_free:
static const struct hid_device_id ms_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV),
.driver_data = MS_HIDINPUT },
+ { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_X6),
+ .driver_data = MS_SIDEWINDER },
+ { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_X4),
+ .driver_data = MS_SIDEWINDER },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_OFFICE_KB),
.driver_data = MS_ERGONOMY },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE4K),
--
1.9.1
On Fri, Apr 4, 2014 at 1:06 PM, Tolga Cakir <[email protected]> wrote:
> This patch will let hid-microsoft handle the Microsoft Sidewinder X4 and X6 keyboards.
I think this commit message should be a little bit more explicit,
especially because the current patch:
- supports 3 keys which were not supported before
- prepares the support of the S1-S30 keys, but without actually
delivering events (which is a little bit awkward way of splitting the
series IMO)
>
> Signed-off-by: Tolga Cakir <[email protected]>
> ---
> drivers/hid/hid-core.c | 2 +
> drivers/hid/hid-ids.h | 2 +
> drivers/hid/hid-microsoft.c | 114 ++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 118 insertions(+)
>
> diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
> index dbe548b..5de5ba1 100644
> --- a/drivers/hid/hid-core.c
> +++ b/drivers/hid/hid-core.c
> @@ -1815,6 +1815,8 @@ static const struct hid_device_id hid_have_special_driver[] = {
> { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD_BOOTLOADER) },
> { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_COMFORT_MOUSE_4500) },
> { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV) },
> + { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_X6) },
> + { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_X4) },
> { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE4K) },
> { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE4K_JP) },
> { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_LK6K) },
> diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
> index 548c1a5..21be65d 100644
> --- a/drivers/hid/hid-ids.h
> +++ b/drivers/hid/hid-ids.h
> @@ -626,6 +626,8 @@
> #define USB_DEVICE_ID_MS_PRESENTER_8K_BT 0x0701
> #define USB_DEVICE_ID_MS_PRESENTER_8K_USB 0x0713
> #define USB_DEVICE_ID_MS_DIGITAL_MEDIA_3K 0x0730
> +#define USB_DEVICE_ID_SIDEWINDER_X6 0x074b
> +#define USB_DEVICE_ID_SIDEWINDER_X4 0x0768
> #define USB_DEVICE_ID_MS_COMFORT_MOUSE_4500 0x076c
> #define USB_DEVICE_ID_MS_TOUCH_COVER_2 0x07a7
> #define USB_DEVICE_ID_MS_TYPE_COVER_2 0x07a9
> diff --git a/drivers/hid/hid-microsoft.c b/drivers/hid/hid-microsoft.c
> index 0a61403..5b5d40f 100644
> --- a/drivers/hid/hid-microsoft.c
> +++ b/drivers/hid/hid-microsoft.c
> @@ -29,12 +29,28 @@
> #define MS_NOGET 0x10
> #define MS_DUPLICATE_USAGES 0x20
> #define MS_RDESC_3K 0x40
> +#define MS_SIDEWINDER 0x80
>
> struct ms_data {
> unsigned long quirks;
> void *extra;
ok, so now extra is used, but with a struct ms_sidewinder_extra.
I do not think having a void pointer is a right choice here given that
there is only one possibility. So I'd rather have a direct struct
ms_sidewinder_extra pointer and the future will tell us if we need to
have a void pointer or not.
In fact, I'd rather not having to allocate twice during probe, so I
would even consider integrating struct ms_sidewinder_extra directly in
struct ms_data.
> };
>
> +/*
> + * For Sidewinder X4 / X6 devices.
> + * @profile: for storing profile status.
> + * @status: holds information about LED states and numpad mode (X6
> + * only). The 1st bit is for numpad mode, bits 2 - 7 are reserved for
> + * LED configuration and the last bit is currently unused.
> + * @key_mask: holds information about pressed special keys. It's
> + * readable via sysfs, so user-space tools can handle keys.
> + */
> +struct ms_sidewinder_extra {
> + unsigned profile;
> + __u8 status;
Both profile and status are not used in this patch.
Splitting a big patch into some smaller ones is good, but keep in mind
that we want to have patches that are self consistent and that do only
what they say.
Let's assume we revert in the future 3/4, what will happens with those
two fields which will not be used anymore?
> + unsigned long key_mask;
> +};
> +
> static __u8 *ms_report_fixup(struct hid_device *hdev, __u8 *rdesc,
> unsigned int *rsize)
> {
> @@ -143,6 +159,56 @@ static int ms_presenter_8k_quirk(struct hid_input *hi, struct hid_usage *usage,
> return 1;
> }
>
> +static int ms_sidewinder_kb_quirk(struct hid_input *hi, struct hid_usage *usage,
> + unsigned long **bit, int *max)
> +{
> + set_bit(EV_REP, hi->input->evbit);
I think you should also test against the usage page. It looks like the
usages are specific enough, but we never know.
> + switch (usage->hid & HID_USAGE) {
> + /*
> + * Registering Sidewinder X4 / X6 special keys. S1 - S6 macro keys
> + * are shared between Sidewinder X4 & X6 and are programmable.
> + */
> + case 0xfb01: ms_map_key_clear(KEY_UNKNOWN); break; /* S1 */
> + case 0xfb02: ms_map_key_clear(KEY_UNKNOWN); break; /* S2 */
> + case 0xfb03: ms_map_key_clear(KEY_UNKNOWN); break; /* S3 */
> + case 0xfb04: ms_map_key_clear(KEY_UNKNOWN); break; /* S4 */
> + case 0xfb05: ms_map_key_clear(KEY_UNKNOWN); break; /* S5 */
> + case 0xfb06: ms_map_key_clear(KEY_UNKNOWN); break; /* S6 */
> + /* S7 - S30 macro keys are only present on the Sidewinder X6 */
> + case 0xfb07: ms_map_key_clear(KEY_UNKNOWN); break; /* S7 */
> + case 0xfb08: ms_map_key_clear(KEY_UNKNOWN); break; /* S8 */
> + case 0xfb09: ms_map_key_clear(KEY_UNKNOWN); break; /* S9 */
> + case 0xfb0a: ms_map_key_clear(KEY_UNKNOWN); break; /* S10 */
> + case 0xfb0b: ms_map_key_clear(KEY_UNKNOWN); break; /* S11 */
> + case 0xfb0c: ms_map_key_clear(KEY_UNKNOWN); break; /* S12 */
> + case 0xfb0d: ms_map_key_clear(KEY_UNKNOWN); break; /* S13 */
> + case 0xfb0e: ms_map_key_clear(KEY_UNKNOWN); break; /* S14 */
> + case 0xfb0f: ms_map_key_clear(KEY_UNKNOWN); break; /* S15 */
> + case 0xfb10: ms_map_key_clear(KEY_UNKNOWN); break; /* S16 */
> + case 0xfb11: ms_map_key_clear(KEY_UNKNOWN); break; /* S17 */
> + case 0xfb12: ms_map_key_clear(KEY_UNKNOWN); break; /* S18 */
> + case 0xfb13: ms_map_key_clear(KEY_UNKNOWN); break; /* S19 */
> + case 0xfb14: ms_map_key_clear(KEY_UNKNOWN); break; /* S20 */
> + case 0xfb15: ms_map_key_clear(KEY_UNKNOWN); break; /* S21 */
> + case 0xfb16: ms_map_key_clear(KEY_UNKNOWN); break; /* S22 */
> + case 0xfb17: ms_map_key_clear(KEY_UNKNOWN); break; /* S23 */
> + case 0xfb18: ms_map_key_clear(KEY_UNKNOWN); break; /* S24 */
> + case 0xfb19: ms_map_key_clear(KEY_UNKNOWN); break; /* S25 */
> + case 0xfb1a: ms_map_key_clear(KEY_UNKNOWN); break; /* S26 */
> + case 0xfb1b: ms_map_key_clear(KEY_UNKNOWN); break; /* S27 */
> + case 0xfb1c: ms_map_key_clear(KEY_UNKNOWN); break; /* S28 */
> + case 0xfb1d: ms_map_key_clear(KEY_UNKNOWN); break; /* S29 */
> + case 0xfb1e: ms_map_key_clear(KEY_UNKNOWN); break; /* S30 */
> + /* Not programmable keys: Profile, Game Center (X6 only) and Macro */
> + case 0xfd11: ms_map_key_clear(KEY_GAMES); break; /* X6: Game Center*/
> + case 0xfd12: ms_map_key_clear(KEY_MACRO); break; /* Macro */
> + case 0xfd15: ms_map_key_clear(KEY_UNKNOWN); break; /* Profile */
Arg, this is a little bit ugly.
you should either consider using fall-through between the each case or
a for loop like you did in ms_event.
> + default:
> + return 0;
> + }
> + return 1;
> +}
> +
> static int ms_input_mapping(struct hid_device *hdev, struct hid_input *hi,
> struct hid_field *field, struct hid_usage *usage,
> unsigned long **bit, int *max)
> @@ -159,6 +225,10 @@ static int ms_input_mapping(struct hid_device *hdev, struct hid_input *hi,
> ms_presenter_8k_quirk(hi, usage, bit, max))
> return 1;
>
> + if ((sc->quirks & MS_SIDEWINDER) &&
> + ms_sidewinder_kb_quirk(hi, usage, bit, max))
> + return 1;
> +
> return 0;
> }
>
> @@ -229,6 +299,34 @@ static int ms_event(struct hid_device *hdev, struct hid_field *field,
> return 1;
> }
>
> + /*
> + * Sidewinder special button handling & profile switching
> + *
> + * Pressing S1 - S30 macro keys will not send out any keycodes, but
> + * set bits on key_mask (readable via sysfs). It's possible to press
> + * multiple special keys at the same time.
> + */
> + if (sc->quirks & MS_SIDEWINDER) {
> + struct input_dev *input = field->hidinput->input;
> + struct ms_sidewinder_extra *sidewinder = sc->extra;
> + int i;
> +
> + for (i = 0; i <= 29; i++) { /* Run through S1 - S30 keys */
> + if ((usage->hid & HID_USAGE) == (0xfb01 + i)) {
> + value ? set_bit(i, &sidewinder->key_mask) : clear_bit(i, &sidewinder->key_mask);
> + break; /* Exit loop, when correct hid usage has been found */
> + }
> + }
> +
> + switch (usage->hid & HID_USAGE) {
> + case 0xfd11: input_event(input, usage->type, KEY_GAMES, value); break;
> + case 0xfd12: input_event(input, usage->type, KEY_MACRO, value); break;
> + case 0xfd15: value ? set_bit(30, &sidewinder->key_mask) : clear_bit(30, &sidewinder->key_mask); break;
I don't really like the "30" here. But I do not see an elegant way of
getting it.
> + }
> +
> + return 1;
> + }
> +
> return 0;
> }
>
> @@ -249,6 +347,18 @@ static int ms_probe(struct hid_device *hdev, const struct hid_device_id *id)
> if (sc->quirks & MS_NOGET)
> hdev->quirks |= HID_QUIRK_NOGET;
>
> + if (sc->quirks & MS_SIDEWINDER) {
> + struct ms_sidewinder_extra *sidewinder;
> +
> + sidewinder = devm_kzalloc(&hdev->dev, sizeof(struct ms_sidewinder_extra),
> + GFP_KERNEL);
> + if (!sidewinder) {
> + hid_err(hdev, "can't alloc microsoft descriptor\n");
Hmm, this err message does not reflect the reality (it's the same as
the one used in 1/4).
Cheers,
Benjamin
> + return -ENOMEM;
> + }
> + sc->extra = sidewinder;
> + }
> +
> ret = hid_parse(hdev);
> if (ret) {
> hid_err(hdev, "parse failed\n");
> @@ -270,6 +380,10 @@ err_free:
> static const struct hid_device_id ms_devices[] = {
> { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV),
> .driver_data = MS_HIDINPUT },
> + { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_X6),
> + .driver_data = MS_SIDEWINDER },
> + { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_X4),
> + .driver_data = MS_SIDEWINDER },
> { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_OFFICE_KB),
> .driver_data = MS_ERGONOMY },
> { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE4K),
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
Am 09.04.2014 22:41, schrieb Benjamin Tissoires:
> On Fri, Apr 4, 2014 at 1:06 PM, Tolga Cakir <[email protected]> wrote:
>> This patch will let hid-microsoft handle the Microsoft Sidewinder X4 and X6 keyboards.
> I think this commit message should be a little bit more explicit,
> especially because the current patch:
> - supports 3 keys which were not supported before
> - prepares the support of the S1-S30 keys, but without actually
> delivering events (which is a little bit awkward way of splitting the
> series IMO)
Yepp, I think I will put patch 2 and 3 together. It will make more sense
then.
>> Signed-off-by: Tolga Cakir <[email protected]>
>> ---
>> drivers/hid/hid-core.c | 2 +
>> drivers/hid/hid-ids.h | 2 +
>> drivers/hid/hid-microsoft.c | 114 ++++++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 118 insertions(+)
>>
>> diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
>> index dbe548b..5de5ba1 100644
>> --- a/drivers/hid/hid-core.c
>> +++ b/drivers/hid/hid-core.c
>> @@ -1815,6 +1815,8 @@ static const struct hid_device_id hid_have_special_driver[] = {
>> { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD_BOOTLOADER) },
>> { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_COMFORT_MOUSE_4500) },
>> { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV) },
>> + { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_X6) },
>> + { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_X4) },
>> { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE4K) },
>> { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE4K_JP) },
>> { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_LK6K) },
>> diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
>> index 548c1a5..21be65d 100644
>> --- a/drivers/hid/hid-ids.h
>> +++ b/drivers/hid/hid-ids.h
>> @@ -626,6 +626,8 @@
>> #define USB_DEVICE_ID_MS_PRESENTER_8K_BT 0x0701
>> #define USB_DEVICE_ID_MS_PRESENTER_8K_USB 0x0713
>> #define USB_DEVICE_ID_MS_DIGITAL_MEDIA_3K 0x0730
>> +#define USB_DEVICE_ID_SIDEWINDER_X6 0x074b
>> +#define USB_DEVICE_ID_SIDEWINDER_X4 0x0768
>> #define USB_DEVICE_ID_MS_COMFORT_MOUSE_4500 0x076c
>> #define USB_DEVICE_ID_MS_TOUCH_COVER_2 0x07a7
>> #define USB_DEVICE_ID_MS_TYPE_COVER_2 0x07a9
>> diff --git a/drivers/hid/hid-microsoft.c b/drivers/hid/hid-microsoft.c
>> index 0a61403..5b5d40f 100644
>> --- a/drivers/hid/hid-microsoft.c
>> +++ b/drivers/hid/hid-microsoft.c
>> @@ -29,12 +29,28 @@
>> #define MS_NOGET 0x10
>> #define MS_DUPLICATE_USAGES 0x20
>> #define MS_RDESC_3K 0x40
>> +#define MS_SIDEWINDER 0x80
>>
>> struct ms_data {
>> unsigned long quirks;
>> void *extra;
> ok, so now extra is used, but with a struct ms_sidewinder_extra.
> I do not think having a void pointer is a right choice here given that
> there is only one possibility. So I'd rather have a direct struct
> ms_sidewinder_extra pointer and the future will tell us if we need to
> have a void pointer or not.
>
> In fact, I'd rather not having to allocate twice during probe, so I
> would even consider integrating struct ms_sidewinder_extra directly in
> struct ms_data.
Originally, I had thought about the same, but discarded the idea of
integrating struct ms_sidewinder_extra into struct ms_data, because
other Microsoft devices would allocate space, which wouldn't be used.
I think having a struct ms_sidewinder_extra pointer in struct ms_data is
the better idea. But if you want me to integrate ms_sidewinder_extra
into ms_data, I will do it ;)!
>
>> };
>>
>> +/*
>> + * For Sidewinder X4 / X6 devices.
>> + * @profile: for storing profile status.
>> + * @status: holds information about LED states and numpad mode (X6
>> + * only). The 1st bit is for numpad mode, bits 2 - 7 are reserved for
>> + * LED configuration and the last bit is currently unused.
>> + * @key_mask: holds information about pressed special keys. It's
>> + * readable via sysfs, so user-space tools can handle keys.
>> + */
>> +struct ms_sidewinder_extra {
>> + unsigned profile;
>> + __u8 status;
> Both profile and status are not used in this patch.
>
> Splitting a big patch into some smaller ones is good, but keep in mind
> that we want to have patches that are self consistent and that do only
> what they say.
> Let's assume we revert in the future 3/4, what will happens with those
> two fields which will not be used anymore?
Thank you for clearing that up, didn't thought about that. I will put
patch 2 and patch 3 into one big patch, cause else it doesn't make any
sense.
>> + unsigned long key_mask;
>> +};
>> +
>> static __u8 *ms_report_fixup(struct hid_device *hdev, __u8 *rdesc,
>> unsigned int *rsize)
>> {
>> @@ -143,6 +159,56 @@ static int ms_presenter_8k_quirk(struct hid_input *hi, struct hid_usage *usage,
>> return 1;
>> }
>>
>> +static int ms_sidewinder_kb_quirk(struct hid_input *hi, struct hid_usage *usage,
>> + unsigned long **bit, int *max)
>> +{
>> + set_bit(EV_REP, hi->input->evbit);
> I think you should also test against the usage page. It looks like the
> usages are specific enough, but we never know.
Okay, I'll come up with a solution in v2, thanks!
>> + switch (usage->hid & HID_USAGE) {
>> + /*
>> + * Registering Sidewinder X4 / X6 special keys. S1 - S6 macro keys
>> + * are shared between Sidewinder X4 & X6 and are programmable.
>> + */
>> + case 0xfb01: ms_map_key_clear(KEY_UNKNOWN); break; /* S1 */
>> + case 0xfb02: ms_map_key_clear(KEY_UNKNOWN); break; /* S2 */
>> + case 0xfb03: ms_map_key_clear(KEY_UNKNOWN); break; /* S3 */
>> + case 0xfb04: ms_map_key_clear(KEY_UNKNOWN); break; /* S4 */
>> + case 0xfb05: ms_map_key_clear(KEY_UNKNOWN); break; /* S5 */
>> + case 0xfb06: ms_map_key_clear(KEY_UNKNOWN); break; /* S6 */
>> + /* S7 - S30 macro keys are only present on the Sidewinder X6 */
>> + case 0xfb07: ms_map_key_clear(KEY_UNKNOWN); break; /* S7 */
>> + case 0xfb08: ms_map_key_clear(KEY_UNKNOWN); break; /* S8 */
>> + case 0xfb09: ms_map_key_clear(KEY_UNKNOWN); break; /* S9 */
>> + case 0xfb0a: ms_map_key_clear(KEY_UNKNOWN); break; /* S10 */
>> + case 0xfb0b: ms_map_key_clear(KEY_UNKNOWN); break; /* S11 */
>> + case 0xfb0c: ms_map_key_clear(KEY_UNKNOWN); break; /* S12 */
>> + case 0xfb0d: ms_map_key_clear(KEY_UNKNOWN); break; /* S13 */
>> + case 0xfb0e: ms_map_key_clear(KEY_UNKNOWN); break; /* S14 */
>> + case 0xfb0f: ms_map_key_clear(KEY_UNKNOWN); break; /* S15 */
>> + case 0xfb10: ms_map_key_clear(KEY_UNKNOWN); break; /* S16 */
>> + case 0xfb11: ms_map_key_clear(KEY_UNKNOWN); break; /* S17 */
>> + case 0xfb12: ms_map_key_clear(KEY_UNKNOWN); break; /* S18 */
>> + case 0xfb13: ms_map_key_clear(KEY_UNKNOWN); break; /* S19 */
>> + case 0xfb14: ms_map_key_clear(KEY_UNKNOWN); break; /* S20 */
>> + case 0xfb15: ms_map_key_clear(KEY_UNKNOWN); break; /* S21 */
>> + case 0xfb16: ms_map_key_clear(KEY_UNKNOWN); break; /* S22 */
>> + case 0xfb17: ms_map_key_clear(KEY_UNKNOWN); break; /* S23 */
>> + case 0xfb18: ms_map_key_clear(KEY_UNKNOWN); break; /* S24 */
>> + case 0xfb19: ms_map_key_clear(KEY_UNKNOWN); break; /* S25 */
>> + case 0xfb1a: ms_map_key_clear(KEY_UNKNOWN); break; /* S26 */
>> + case 0xfb1b: ms_map_key_clear(KEY_UNKNOWN); break; /* S27 */
>> + case 0xfb1c: ms_map_key_clear(KEY_UNKNOWN); break; /* S28 */
>> + case 0xfb1d: ms_map_key_clear(KEY_UNKNOWN); break; /* S29 */
>> + case 0xfb1e: ms_map_key_clear(KEY_UNKNOWN); break; /* S30 */
>> + /* Not programmable keys: Profile, Game Center (X6 only) and Macro */
>> + case 0xfd11: ms_map_key_clear(KEY_GAMES); break; /* X6: Game Center*/
>> + case 0xfd12: ms_map_key_clear(KEY_MACRO); break; /* Macro */
>> + case 0xfd15: ms_map_key_clear(KEY_UNKNOWN); break; /* Profile */
> Arg, this is a little bit ugly.
>
> you should either consider using fall-through between the each case or
> a for loop like you did in ms_event.
>
Hehe, I'll use a loop in v2 to keep things clean.
>> + default:
>> + return 0;
>> + }
>> + return 1;
>> +}
>> +
>> static int ms_input_mapping(struct hid_device *hdev, struct hid_input *hi,
>> struct hid_field *field, struct hid_usage *usage,
>> unsigned long **bit, int *max)
>> @@ -159,6 +225,10 @@ static int ms_input_mapping(struct hid_device *hdev, struct hid_input *hi,
>> ms_presenter_8k_quirk(hi, usage, bit, max))
>> return 1;
>>
>> + if ((sc->quirks & MS_SIDEWINDER) &&
>> + ms_sidewinder_kb_quirk(hi, usage, bit, max))
>> + return 1;
>> +
>> return 0;
>> }
>>
>> @@ -229,6 +299,34 @@ static int ms_event(struct hid_device *hdev, struct hid_field *field,
>> return 1;
>> }
>>
>> + /*
>> + * Sidewinder special button handling & profile switching
>> + *
>> + * Pressing S1 - S30 macro keys will not send out any keycodes, but
>> + * set bits on key_mask (readable via sysfs). It's possible to press
>> + * multiple special keys at the same time.
>> + */
>> + if (sc->quirks & MS_SIDEWINDER) {
>> + struct input_dev *input = field->hidinput->input;
>> + struct ms_sidewinder_extra *sidewinder = sc->extra;
>> + int i;
>> +
>> + for (i = 0; i <= 29; i++) { /* Run through S1 - S30 keys */
>> + if ((usage->hid & HID_USAGE) == (0xfb01 + i)) {
>> + value ? set_bit(i, &sidewinder->key_mask) : clear_bit(i, &sidewinder->key_mask);
>> + break; /* Exit loop, when correct hid usage has been found */
>> + }
>> + }
>> +
>> + switch (usage->hid & HID_USAGE) {
>> + case 0xfd11: input_event(input, usage->type, KEY_GAMES, value); break;
>> + case 0xfd12: input_event(input, usage->type, KEY_MACRO, value); break;
>> + case 0xfd15: value ? set_bit(30, &sidewinder->key_mask) : clear_bit(30, &sidewinder->key_mask); break;
> I don't really like the "30" here. But I do not see an elegant way of
> getting it.
Hmm, I'll think about another solution. I might use something like
MACRO_KEYS_MAX or something like that and put that in there.
>> + }
>> +
>> + return 1;
>> + }
>> +
>> return 0;
>> }
>>
>> @@ -249,6 +347,18 @@ static int ms_probe(struct hid_device *hdev, const struct hid_device_id *id)
>> if (sc->quirks & MS_NOGET)
>> hdev->quirks |= HID_QUIRK_NOGET;
>>
>> + if (sc->quirks & MS_SIDEWINDER) {
>> + struct ms_sidewinder_extra *sidewinder;
>> +
>> + sidewinder = devm_kzalloc(&hdev->dev, sizeof(struct ms_sidewinder_extra),
>> + GFP_KERNEL);
>> + if (!sidewinder) {
>> + hid_err(hdev, "can't alloc microsoft descriptor\n");
> Hmm, this err message does not reflect the reality (it's the same as
> the one used in 1/4).
>
> Cheers,
> Benjamin
Ouch, that hurts. I will fix it in v2!
Thank you Benjamin for your time!
Greetings,
Tolga Cakir
>> + return -ENOMEM;
>> + }
>> + sc->extra = sidewinder;
>> + }
>> +
>> ret = hid_parse(hdev);
>> if (ret) {
>> hid_err(hdev, "parse failed\n");
>> @@ -270,6 +380,10 @@ err_free:
>> static const struct hid_device_id ms_devices[] = {
>> { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV),
>> .driver_data = MS_HIDINPUT },
>> + { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_X6),
>> + .driver_data = MS_SIDEWINDER },
>> + { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_X4),
>> + .driver_data = MS_SIDEWINDER },
>> { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_OFFICE_KB),
>> .driver_data = MS_ERGONOMY },
>> { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE4K),
>> --
>> 1.9.1
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>> the body of a message to [email protected]
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>> Please read the FAQ at http://www.tux.org/lkml/
> --
> To unsubscribe from this list: send the line "unsubscribe linux-input" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html