Hi Dmitry and Pali,
I refactored the ioctl handlers as described above and tested it. It
seems to be working without any compat changes.
I compiled the following code in both 32-bit (gcc -m32 test.c) and
64-bit to test.
Please take a look at the new patch.
Thanks
Abhishek
test.c
---
#include <errno.h>
#include <fcntl.h>
#include <stdio.h>
#include <string.h>
#include <sys/ioctl.h>
#include <unistd.h>
#include "uinput.h"
int foo(int fd) {
struct uinput_dev dev;
int ret;
memset(&dev, 0, sizeof(dev));
dev.id.bustype = BUS_BLUETOOTH;
dev.id.vendor = 0x3;
dev.id.product = 0x4;
dev.id.version = 0x5;
memcpy(dev.name, "Test", 4);
printf("Setting bus/vendor/product/version\n");
if (write(fd, &dev, sizeof(dev)) < 0) {
perror("write");
return errno;
}
printf("Making ioctl calls\n");
ioctl(fd, UI_SET_EVBIT, EV_KEY);
ioctl(fd, UI_SET_EVBIT, EV_REL);
ioctl(fd, UI_SET_EVBIT, EV_REP);
ioctl(fd, UI_SET_EVBIT, EV_SYN);
/* I also replaced this with UI_SET_PHYS to check for the
deprecation notice. */
if (ioctl(fd, UI_SET_PHYS_STR(18), "00:00:00:33:44:55") < 0) {
perror("ioctl UI_SET_PHYS");
return errno;
}
if (ioctl(fd, UI_SET_UNIQ_STR(18), "00:11:22:00:00:00") < 0) {
perror("ioctl UI_SET_UNIQ");
return errno;
}
if (ioctl(fd, UI_DEV_CREATE, NULL) < 0) {
perror("ioctl UI_DEV_CREATE");
return errno;
}
return 0;
}
int main() {
int fd, ret;
fd = open("/dev/uinput", O_RDWR);
if (fd < 0) {
perror("open");
return fd;
}
printf("Opened fd %d for write\n", fd);
ret = foo(fd);
if (!ret) {
printf("Uinput has been prepared. Check the uniq value.\n");
printf("Sleeping for 15s...\n");
sleep(20);
}
close(fd);
return ret;
}
On Tue, Dec 3, 2019 at 11:11 AM Dmitry Torokhov
<[email protected]> wrote:
>
> On Tue, Dec 03, 2019 at 06:38:21PM +0100, Pali Rohár wrote:
> > On Tuesday 03 December 2019 00:09:47 Pali Rohár wrote:
> > > On Monday 02 December 2019 11:36:28 Dmitry Torokhov wrote:
> > > > On Mon, Dec 02, 2019 at 07:53:40PM +0100, Pali Rohár wrote:
> > > > > On Monday 02 December 2019 09:54:40 Dmitry Torokhov wrote:
> > > > > > On Mon, Dec 02, 2019 at 09:47:50AM +0100, Pali Rohár wrote:
> > > > > > > On Sunday 01 December 2019 17:23:05 Dmitry Torokhov wrote:
> > > > > > > > Hi Pali,
> > > > > > > >
> > > > > > > > On Sun, Dec 01, 2019 at 03:53:57PM +0100, Pali Rohár wrote:
> > > > > > > > > Hello!
> > > > > > > > >
> > > > > > > > > On Wednesday 27 November 2019 10:51:39 Abhishek Pandit-Subedi wrote:
> > > > > > > > > > Support setting the uniq attribute of the input device. The uniq
> > > > > > > > > > attribute is used as a unique identifier for the connected device.
> > > > > > > > > >
> > > > > > > > > > For example, uinput devices created by BlueZ will store the address of
> > > > > > > > > > the connected device as the uniq property.
> > > > > > > > > >
> > > > > > > > > > Signed-off-by: Abhishek Pandit-Subedi <[email protected]>
> > > > > > > > >
> > > > > > > > > ...
> > > > > > > > >
> > > > > > > > > > diff --git a/include/uapi/linux/uinput.h b/include/uapi/linux/uinput.h
> > > > > > > > > > index c9e677e3af1d..d5b7767c1b02 100644
> > > > > > > > > > --- a/include/uapi/linux/uinput.h
> > > > > > > > > > +++ b/include/uapi/linux/uinput.h
> > > > > > > > > > @@ -145,6 +145,7 @@ struct uinput_abs_setup {
> > > > > > > > > > #define UI_SET_PHYS _IOW(UINPUT_IOCTL_BASE, 108, char*)
> > > > > > > > > > #define UI_SET_SWBIT _IOW(UINPUT_IOCTL_BASE, 109, int)
> > > > > > > > > > #define UI_SET_PROPBIT _IOW(UINPUT_IOCTL_BASE, 110, int)
> > > > > > > > > > +#define UI_SET_UNIQ _IOW(UINPUT_IOCTL_BASE, 111, char*)
> > > > > > > > >
> > > > > > > > > I think that usage of char* as type in _IOW would cause compatibility
> > > > > > > > > problems like it is for UI_SET_PHYS (there is UI_SET_PHYS_COMPAT). Size
> > > > > > > > > of char* pointer depends on userspace (32 vs 64bit), so 32bit process on
> > > > > > > > > 64bit kernel would not be able to call this new UI_SET_UNIQ ioctl.
> > > > > > > > >
> > > > > > > > > I would suggest to define this ioctl as e.g.:
> > > > > > > > >
> > > > > > > > > #define UI_SET_UNIQ _IOW(_IOC_WRITE, UINPUT_IOCTL_BASE, 111, 0)
> > > > > > > > >
> > > > > > > > > And then in uinput.c code handle it as:
> > > > > > > > >
> > > > > > > > > case UI_SET_UNIQ & ~IOCSIZE_MASK:
> > > > > > > > >
> > > > > > > > > as part of section /* Now check variable-length commands */
> > > > > > > >
> > > > > > > > If we did not have UI_SET_PHYS in its current form, I'd agree with you,
> > > > > > > > but I think there is benefit in having UI_SET_UNIQ be similar to
> > > > > > > > UI_SET_PHYS.
> > > > > > >
> > > > > > > I thought that ioctl is just number, so we can define it as we want. And
> > > > > > > because uinput.c has already switch for variable-length commands it
> > > > > > > would be easy to use it. Final handling can be in separate function like
> > > > > > > for UI_SET_PHYS which can look like same.
> > > > > >
> > > > > > Yes, we can define ioctl number as whatever we want. What I was trying
> > > > > > to say, right now users do this:
> > > > > >
> > > > > > rc = ioctl(fd, UI_SET_PHYS, "whatever");
> > > > > > ...
> > > > > >
> > > > > > and with UI_SET_UNIQ they expect the following to work:
> > > > > >
> > > > > > rc = ioctl(fd, UI_SET_UNIQ, "whatever");
> > > > > > ...
> > > > >
> > > > > And would not following definition
> > > > >
> > > > > #define UI_SET_UNIQ _IOW(_IOC_WRITE, UINPUT_IOCTL_BASE, 111, 0)
> > > > >
> > > > > allow userspace to call
> > > > >
> > > > > rc = ioctl(fd, UI_SET_UNIQ, "whatever");
> > > > >
> > > > > as you want?
> > > >
> > > > OK, so what you are saying is that we can have whatever in the size
> > > > portion of ioctl number and simply ignore it in the driver
> > >
> > > Yes.
> > >
> > > > (and I do not
> > > > think we need to do any of "UI_SET_UNIQ & ~IOCSIZE_MASK" really).
> > >
> > > You are right, we do not need to clear any IOCSIZE_MASK. As ioctl number
> > > would be always sam constant number. So it would be really simple. So
> > > original patch would work if UI_SET_UNIQ define would be changed to
> > > above with _IOW() macro.
> > >
> > > > While this would work, I am not sure it is the best option as I think
> > > > we'd have to comment extensively why we have arbitrary number in place
> > > > of the size.
> > >
> > > Comment can be added. But this is as ioctl is going to accept variable
> > > length array (not fixed array), zero value make sense for me (zero as we
> > > do not know exact size).
> > >
> > > > And we still do not really save anything, as we still have to go through
> > > > compat ioctl handler (since we have it already) and it is very simple to
> > > > add a case for UI_SET_UNIQ there...
> > >
> > > Yes, compat ioctl is still used. But my proposed solution does not
> > > involve to define a new compact ioctl number just for sizeof(char *).
> > >
> > > I'm looking at this particular problem from side, that there is no
> > > reason to define two new ioctl numbers for UI_SET_UNIQ (one normal
> > > number and one compat number), when one number is enough. It is one new
> > > ioctl call, so one ioctl number should be enough.
> > >
> > > And also with my proposed solution with ioctl size=0 it simplify
> > > implementation of UI_SET_UNIQ as it is not needed to implement also
> > > UI_SET_UNIQ_COMPAT ioctl nor touch compat ioct code path. Basically
> > > original patch (with changed UI_SET_UNIQ macro) is enough.
> > >
> > > But of of course, this is my view of this problem and I would not be
> > > against your decision from maintainer position. Both solutions would
> > > work correctly and bring same behavior for userspace applications.
> >
> >
> > Hi Dmitry!
> >
> > I was looking again at those _IOW defines for ioctl calls and I have
> > another argument why not specify 'char *' in _IOW:
> >
> > All ioctls in _IOW() specify as a third macro argument type which is
> > passed as pointer to the third argument for ioctl() syscall.
> >
> > So e.g.:
> >
> > #define EVIOCSCLOCKID _IOW('E', 0xa0, int)
> >
> > is called from userspace as:
> >
> > int val;
> > ioctl(fd, EVIOCSCLOCKID, &val);
> >
> > Or
> >
> > #define EVIOCSMASK _IOW('E', 0x93, struct input_mask)
> >
> > is called as:
> >
> > struct input_mask val;
> > ioctl(fd, EVIOCSMASK, &val);
> >
> > So basically third argument for _IOW specify size of byte buffer passed
> > as third argument for ioctl(). In _IOW is not specified pointer to
> > struct input_mask, but struct input_mask itself.
> >
> > And in case you define
> >
> > #define MY_NEW_IOCTL _IOW(UINPUT_IOCTL_BASE, 200, char*)
> >
> > then you by above usage you should pass data as:
> >
> > char *val = "DATA";
> > ioctl(fd, MY_NEW_IOCTL, &val);
> >
> > Which is not same as just:
> >
> > ioctl(fd, MY_NEW_IOCTL, "DATA");
> >
> > As in former case you passed pointer to pointer to data and in later
> > case you passed only pointer to data.
> >
> > It just mean that UI_SET_PHYS is already defined inconsistently which is
> > also reason why compat ioctl for it was introduced.
>
> Yes, you are right. UI_SET_PHYS is messed up. I guess the question is
> what to do with all of this...
>
> Maybe we should define
>
> #define UI_SET_PHYS_STR(len) _IOC(_IOC_WRITE, UINPUT_IOCTL_BASE, 111, len)
> #define UI_SET_UNIQ_STR(len) _IOC(_IOC_WRITE, UINPUT_IOCTL_BASE, 112, len)
>
> and mark UI_SET_PHYS as deprecated/wrong? This will allow us to specify
> exactly how much data kernel is supposed to fetch from userspace instead
> of trying to rely on a null-terminated string.
>
> It would also be very helpful if BlueZ did not accept changes that use
> this brand new ioctl until after we agreed on how it should look like.
> Luiz, can it be reverted for now please?
>
> Thanks.
>
> --
> Dmitry