Add a V4L2 sub-device driver for the Sony IMX214 image sensor.
This is a camera sensor using the I2C bus for control and the
CSI-2 bus for data.
Tested on a DB820c alike board with Intrinsyc Open-Q 13MP camera.
Signed-off-by: Ricardo Ribalda Delgado <[email protected]>
Reviewed-by: Jacopo Mondi <[email protected]>
---
Changelog from v3:
Sakari Ailus (Thanks!):
-Enable runtime PM
-Exposure control
-Use v4l2_find_nearest_size
Notes:
- v4l2_find_nearest_size is my new best friend. great hack!
- I had to disable pm asap to avoid setting any control if we are not in
streamon, otherwise the qcom i2c would not work.
MAINTAINERS | 8 +
drivers/media/i2c/Kconfig | 11 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/imx214.c | 1096 ++++++++++++++++++++++++++++++++++++
4 files changed, 1116 insertions(+)
create mode 100644 drivers/media/i2c/imx214.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 9989925f658d..2ae68894e700 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13521,6 +13521,14 @@ S: Maintained
F: drivers/ssb/
F: include/linux/ssb/
+SONY IMX214 SENSOR DRIVER
+M: Ricardo Ribalda <[email protected]>
+L: [email protected]
+T: git git://linuxtv.org/media_tree.git
+S: Maintained
+F: drivers/media/i2c/imx214.c
+F: Documentation/devicetree/bindings/media/i2c/imx214.txt
+
SONY IMX258 SENSOR DRIVER
M: Sakari Ailus <[email protected]>
L: [email protected]
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index bfdb494686bf..870976dee4a2 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -595,6 +595,17 @@ config VIDEO_APTINA_PLL
config VIDEO_SMIAPP_PLL
tristate
+config VIDEO_IMX214
+ tristate "Sony IMX214 sensor support"
+ depends on GPIOLIB && I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on MEDIA_CAMERA_SUPPORT
+ help
+ This is a Video4Linux2 sensor driver for the Sony
+ IMX214 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imx214.
+
config VIDEO_IMX258
tristate "Sony IMX258 sensor support"
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index a94eb03d10d4..61305edc6165 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -106,6 +106,7 @@ obj-$(CONFIG_VIDEO_I2C) += video-i2c.o
obj-$(CONFIG_VIDEO_ML86V7667) += ml86v7667.o
obj-$(CONFIG_VIDEO_OV2659) += ov2659.o
obj-$(CONFIG_VIDEO_TC358743) += tc358743.o
+obj-$(CONFIG_VIDEO_IMX214) += imx214.o
obj-$(CONFIG_VIDEO_IMX258) += imx258.o
obj-$(CONFIG_VIDEO_IMX274) += imx274.o
diff --git a/drivers/media/i2c/imx214.c b/drivers/media/i2c/imx214.c
new file mode 100644
index 000000000000..0668c3a54053
--- /dev/null
+++ b/drivers/media/i2c/imx214.c
@@ -0,0 +1,1096 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * imx214.c - imx214 sensor driver
+ *
+ * Copyright 2018 Qtechnology A/S
+ *
+ * Ricardo Ribalda <[email protected]>
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <media/media-entity.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-subdev.h>
+
+#define IMX214_DEFAULT_CLK_FREQ 24000000
+#define IMX214_DEFAULT_LINK_FREQ 480000000
+#define IMX214_DEFAULT_PIXEL_RATE ((IMX214_DEFAULT_LINK_FREQ * 8LL) / 10)
+#define IMX214_WIDTH 4096
+#define IMX214_HEIGHT 2304
+#define IMX214_FPS 30
+#define IMX214_MBUS_CODE MEDIA_BUS_FMT_SRGGB10_1X10
+
+static const char * const imx214_supply_name[] = {
+ "vdda",
+ "vddd",
+ "vdddo",
+};
+
+#define IMX214_NUM_SUPPLIES ARRAY_SIZE(imx214_supply_name)
+
+struct imx214 {
+ struct device *dev;
+ struct clk *xclk;
+ struct regmap *regmap;
+
+ struct v4l2_subdev sd;
+ struct media_pad pad;
+ struct v4l2_mbus_framefmt fmt;
+ struct v4l2_rect crop;
+
+ struct v4l2_ctrl_handler ctrls;
+ struct v4l2_ctrl *pixel_rate;
+ struct v4l2_ctrl *link_freq;
+ struct v4l2_ctrl *exposure;
+
+ struct regulator_bulk_data supplies[IMX214_NUM_SUPPLIES];
+
+ struct gpio_desc *enable_gpio;
+
+ bool streaming;
+};
+
+struct reg_8 {
+ u16 addr;
+ u8 val;
+};
+
+enum {
+ IMX214_TABLE_WAIT_MS = 0,
+ IMX214_TABLE_END,
+ IMX214_MAX_RETRIES,
+ IMX214_WAIT_MS
+};
+
+/*From imx214_mode_tbls.h*/
+static const struct reg_8 mode_4096x2304[] = {
+ {0x0114, 0x03},
+ {0x0220, 0x00},
+ {0x0221, 0x11},
+ {0x0222, 0x01},
+ {0x0340, 0x0C},
+ {0x0341, 0x7A},
+ {0x0342, 0x13},
+ {0x0343, 0x90},
+ {0x0344, 0x00},
+ {0x0345, 0x38},
+ {0x0346, 0x01},
+ {0x0347, 0x98},
+ {0x0348, 0x10},
+ {0x0349, 0x37},
+ {0x034A, 0x0A},
+ {0x034B, 0x97},
+ {0x0381, 0x01},
+ {0x0383, 0x01},
+ {0x0385, 0x01},
+ {0x0387, 0x01},
+ {0x0900, 0x00},
+ {0x0901, 0x00},
+ {0x0902, 0x00},
+ {0x3000, 0x35},
+ {0x3054, 0x01},
+ {0x305C, 0x11},
+
+ {0x0112, 0x0A},
+ {0x0113, 0x0A},
+ {0x034C, 0x10},
+ {0x034D, 0x00},
+ {0x034E, 0x09},
+ {0x034F, 0x00},
+ {0x0401, 0x00},
+ {0x0404, 0x00},
+ {0x0405, 0x10},
+ {0x0408, 0x00},
+ {0x0409, 0x00},
+ {0x040A, 0x00},
+ {0x040B, 0x00},
+ {0x040C, 0x10},
+ {0x040D, 0x00},
+ {0x040E, 0x09},
+ {0x040F, 0x00},
+
+ {0x0301, 0x05},
+ {0x0303, 0x02},
+ {0x0305, 0x03},
+ {0x0306, 0x00},
+ {0x0307, 0x96},
+ {0x0309, 0x0A},
+ {0x030B, 0x01},
+ {0x0310, 0x00},
+
+ {0x0820, 0x12},
+ {0x0821, 0xC0},
+ {0x0822, 0x00},
+ {0x0823, 0x00},
+
+ {0x3A03, 0x09},
+ {0x3A04, 0x50},
+ {0x3A05, 0x01},
+
+ {0x0B06, 0x01},
+ {0x30A2, 0x00},
+
+ {0x30B4, 0x00},
+
+ {0x3A02, 0xFF},
+
+ {0x3011, 0x00},
+ {0x3013, 0x01},
+
+ {0x0202, 0x0C},
+ {0x0203, 0x70},
+ {0x0224, 0x01},
+ {0x0225, 0xF4},
+
+ {0x0204, 0x00},
+ {0x0205, 0x00},
+ {0x020E, 0x01},
+ {0x020F, 0x00},
+ {0x0210, 0x01},
+ {0x0211, 0x00},
+ {0x0212, 0x01},
+ {0x0213, 0x00},
+ {0x0214, 0x01},
+ {0x0215, 0x00},
+ {0x0216, 0x00},
+ {0x0217, 0x00},
+
+ {0x4170, 0x00},
+ {0x4171, 0x10},
+ {0x4176, 0x00},
+ {0x4177, 0x3C},
+ {0xAE20, 0x04},
+ {0xAE21, 0x5C},
+
+ {IMX214_TABLE_WAIT_MS, 10},
+ {0x0138, 0x01},
+ {IMX214_TABLE_END, 0x00}
+};
+
+static const struct reg_8 mode_1920x1080[] = {
+ {0x0114, 0x03},
+ {0x0220, 0x00},
+ {0x0221, 0x11},
+ {0x0222, 0x01},
+ {0x0340, 0x0C},
+ {0x0341, 0x7A},
+ {0x0342, 0x13},
+ {0x0343, 0x90},
+ {0x0344, 0x04},
+ {0x0345, 0x78},
+ {0x0346, 0x03},
+ {0x0347, 0xFC},
+ {0x0348, 0x0B},
+ {0x0349, 0xF7},
+ {0x034A, 0x08},
+ {0x034B, 0x33},
+ {0x0381, 0x01},
+ {0x0383, 0x01},
+ {0x0385, 0x01},
+ {0x0387, 0x01},
+ {0x0900, 0x00},
+ {0x0901, 0x00},
+ {0x0902, 0x00},
+ {0x3000, 0x35},
+ {0x3054, 0x01},
+ {0x305C, 0x11},
+
+ {0x0112, 0x0A},
+ {0x0113, 0x0A},
+ {0x034C, 0x07},
+ {0x034D, 0x80},
+ {0x034E, 0x04},
+ {0x034F, 0x38},
+ {0x0401, 0x00},
+ {0x0404, 0x00},
+ {0x0405, 0x10},
+ {0x0408, 0x00},
+ {0x0409, 0x00},
+ {0x040A, 0x00},
+ {0x040B, 0x00},
+ {0x040C, 0x07},
+ {0x040D, 0x80},
+ {0x040E, 0x04},
+ {0x040F, 0x38},
+
+ {0x0301, 0x05},
+ {0x0303, 0x02},
+ {0x0305, 0x03},
+ {0x0306, 0x00},
+ {0x0307, 0x96},
+ {0x0309, 0x0A},
+ {0x030B, 0x01},
+ {0x0310, 0x00},
+
+ {0x0820, 0x12},
+ {0x0821, 0xC0},
+ {0x0822, 0x00},
+ {0x0823, 0x00},
+
+ {0x3A03, 0x04},
+ {0x3A04, 0xF8},
+ {0x3A05, 0x02},
+
+ {0x0B06, 0x01},
+ {0x30A2, 0x00},
+
+ {0x30B4, 0x00},
+
+ {0x3A02, 0xFF},
+
+ {0x3011, 0x00},
+ {0x3013, 0x01},
+
+ {0x0202, 0x0C},
+ {0x0203, 0x70},
+ {0x0224, 0x01},
+ {0x0225, 0xF4},
+
+ {0x0204, 0x00},
+ {0x0205, 0x00},
+ {0x020E, 0x01},
+ {0x020F, 0x00},
+ {0x0210, 0x01},
+ {0x0211, 0x00},
+ {0x0212, 0x01},
+ {0x0213, 0x00},
+ {0x0214, 0x01},
+ {0x0215, 0x00},
+ {0x0216, 0x00},
+ {0x0217, 0x00},
+
+ {0x4170, 0x00},
+ {0x4171, 0x10},
+ {0x4176, 0x00},
+ {0x4177, 0x3C},
+ {0xAE20, 0x04},
+ {0xAE21, 0x5C},
+
+ {IMX214_TABLE_WAIT_MS, 10},
+ {0x0138, 0x01},
+ {IMX214_TABLE_END, 0x00}
+};
+
+static const struct reg_8 mode_table_common[] = {
+ /* software reset */
+
+ /* software standby settings */
+ {0x0100, 0x00},
+
+ /* ATR setting */
+ {0x9300, 0x02},
+
+ /* external clock setting */
+ {0x0136, 0x18},
+ {0x0137, 0x00},
+
+ /* global setting */
+ /* basic config */
+ {0x0101, 0x00},
+ {0x0105, 0x01},
+ {0x0106, 0x01},
+ {0x4550, 0x02},
+ {0x4601, 0x00},
+ {0x4642, 0x05},
+ {0x6227, 0x11},
+ {0x6276, 0x00},
+ {0x900E, 0x06},
+ {0xA802, 0x90},
+ {0xA803, 0x11},
+ {0xA804, 0x62},
+ {0xA805, 0x77},
+ {0xA806, 0xAE},
+ {0xA807, 0x34},
+ {0xA808, 0xAE},
+ {0xA809, 0x35},
+ {0xA80A, 0x62},
+ {0xA80B, 0x83},
+ {0xAE33, 0x00},
+
+ /* analog setting */
+ {0x4174, 0x00},
+ {0x4175, 0x11},
+ {0x4612, 0x29},
+ {0x461B, 0x12},
+ {0x461F, 0x06},
+ {0x4635, 0x07},
+ {0x4637, 0x30},
+ {0x463F, 0x18},
+ {0x4641, 0x0D},
+ {0x465B, 0x12},
+ {0x465F, 0x11},
+ {0x4663, 0x11},
+ {0x4667, 0x0F},
+ {0x466F, 0x0F},
+ {0x470E, 0x09},
+ {0x4909, 0xAB},
+ {0x490B, 0x95},
+ {0x4915, 0x5D},
+ {0x4A5F, 0xFF},
+ {0x4A61, 0xFF},
+ {0x4A73, 0x62},
+ {0x4A85, 0x00},
+ {0x4A87, 0xFF},
+
+ /* embedded data */
+ {0x5041, 0x04},
+ {0x583C, 0x04},
+ {0x620E, 0x04},
+ {0x6EB2, 0x01},
+ {0x6EB3, 0x00},
+ {0x9300, 0x02},
+
+ /* imagequality */
+ /* HDR setting */
+ {0x3001, 0x07},
+ {0x6D12, 0x3F},
+ {0x6D13, 0xFF},
+ {0x9344, 0x03},
+ {0x9706, 0x10},
+ {0x9707, 0x03},
+ {0x9708, 0x03},
+ {0x9E04, 0x01},
+ {0x9E05, 0x00},
+ {0x9E0C, 0x01},
+ {0x9E0D, 0x02},
+ {0x9E24, 0x00},
+ {0x9E25, 0x8C},
+ {0x9E26, 0x00},
+ {0x9E27, 0x94},
+ {0x9E28, 0x00},
+ {0x9E29, 0x96},
+
+ /* CNR parameter setting */
+ {0x69DB, 0x01},
+
+ /* Moire reduction */
+ {0x6957, 0x01},
+
+ /* image enhancment */
+ {0x6987, 0x17},
+ {0x698A, 0x03},
+ {0x698B, 0x03},
+
+ /* white balanace */
+ {0x0B8E, 0x01},
+ {0x0B8F, 0x00},
+ {0x0B90, 0x01},
+ {0x0B91, 0x00},
+ {0x0B92, 0x01},
+ {0x0B93, 0x00},
+ {0x0B94, 0x01},
+ {0x0B95, 0x00},
+
+ /* ATR setting */
+ {0x6E50, 0x00},
+ {0x6E51, 0x32},
+ {0x9340, 0x00},
+ {0x9341, 0x3C},
+ {0x9342, 0x03},
+ {0x9343, 0xFF},
+ {IMX214_TABLE_END, 0x00}
+};
+
+/*
+ * Declare modes in order, from biggest
+ * to smallest height.
+ */
+static const struct imx214_mode {
+ u32 width;
+ u32 height;
+ const struct reg_8 *reg_table;
+} imx214_modes[] = {
+ {
+ .width = 4096,
+ .height = 2304,
+ .reg_table = mode_4096x2304,
+ },
+ {
+ .width = 1920,
+ .height = 1080,
+ .reg_table = mode_1920x1080,
+ },
+};
+
+static inline struct imx214 *to_imx214(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct imx214, sd);
+}
+
+static int imx214_set_power_on(struct imx214 *imx214)
+{
+ int ret;
+
+ ret = regulator_bulk_enable(IMX214_NUM_SUPPLIES, imx214->supplies);
+ if (ret < 0) {
+ dev_err(imx214->dev, "failed to enable regulators: %d\n", ret);
+ return ret;
+ }
+
+ usleep_range(2000, 3000);
+
+ ret = clk_prepare_enable(imx214->xclk);
+ if (ret < 0) {
+ regulator_bulk_disable(IMX214_NUM_SUPPLIES, imx214->supplies);
+ dev_err(imx214->dev, "clk prepare enable failed\n");
+ return ret;
+ }
+
+ gpiod_set_value_cansleep(imx214->enable_gpio, 1);
+ usleep_range(12000, 15000);
+
+ return 0;
+}
+
+static void imx214_set_power_off(struct imx214 *imx214)
+{
+ gpiod_set_value_cansleep(imx214->enable_gpio, 0);
+
+ clk_disable_unprepare(imx214->xclk);
+
+ regulator_bulk_disable(IMX214_NUM_SUPPLIES, imx214->supplies);
+ usleep_range(10, 20);
+}
+
+static int imx214_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ if (code->index > 0)
+ return -EINVAL;
+
+ code->code = IMX214_MBUS_CODE;
+
+ return 0;
+}
+
+static int imx214_enum_frame_size(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_frame_size_enum *fse)
+{
+ if (fse->code != IMX214_MBUS_CODE)
+ return -EINVAL;
+
+ if (fse->index >= ARRAY_SIZE(imx214_modes))
+ return -EINVAL;
+
+ fse->min_width = fse->max_width = imx214_modes[fse->index].width;
+ fse->min_height = fse->max_height = imx214_modes[fse->index].height;
+
+ return 0;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int imx214_s_register(struct v4l2_subdev *subdev,
+ const struct v4l2_dbg_register *reg)
+{
+ struct imx214 *imx214 = container_of(subdev, struct imx214, sd);
+
+ return regmap_write(imx214->regmap, reg->reg, reg->val);
+}
+
+static int imx214_g_register(struct v4l2_subdev *subdev,
+ struct v4l2_dbg_register *reg)
+{
+ struct imx214 *imx214 = container_of(subdev, struct imx214, sd);
+ unsigned int aux;
+ int ret;
+
+ reg->size = 1;
+ ret = regmap_read(imx214->regmap, reg->reg, &aux);
+ reg->val = aux;
+
+ return ret;
+}
+#endif
+
+static const struct v4l2_subdev_core_ops imx214_core_ops = {
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .g_register = imx214_g_register,
+ .s_register = imx214_s_register,
+#endif
+};
+
+static struct v4l2_mbus_framefmt *
+__imx214_get_pad_format(struct imx214 *imx214,
+ struct v4l2_subdev_pad_config *cfg,
+ unsigned int pad,
+ enum v4l2_subdev_format_whence which)
+{
+ switch (which) {
+ case V4L2_SUBDEV_FORMAT_TRY:
+ return v4l2_subdev_get_try_format(&imx214->sd, cfg, pad);
+ case V4L2_SUBDEV_FORMAT_ACTIVE:
+ return &imx214->fmt;
+ default:
+ return NULL;
+ }
+}
+
+static int imx214_get_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *format)
+{
+ struct imx214 *imx214 = to_imx214(sd);
+
+ format->format = *__imx214_get_pad_format(imx214, cfg, format->pad,
+ format->which);
+
+ return 0;
+}
+
+static struct v4l2_rect *
+__imx214_get_pad_crop(struct imx214 *imx214, struct v4l2_subdev_pad_config *cfg,
+ unsigned int pad, enum v4l2_subdev_format_whence which)
+{
+ switch (which) {
+ case V4L2_SUBDEV_FORMAT_TRY:
+ return v4l2_subdev_get_try_crop(&imx214->sd, cfg, pad);
+ case V4L2_SUBDEV_FORMAT_ACTIVE:
+ return &imx214->crop;
+ default:
+ return NULL;
+ }
+}
+
+static int imx214_set_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *format)
+{
+ struct imx214 *imx214 = to_imx214(sd);
+ struct v4l2_mbus_framefmt *__format;
+ struct v4l2_rect *__crop;
+ const struct imx214_mode *mode;
+
+ __crop = __imx214_get_pad_crop(imx214, cfg, format->pad, format->which);
+
+ if (format)
+ mode = v4l2_find_nearest_size(imx214_modes,
+ ARRAY_SIZE(imx214_modes), width, height,
+ format->format.width, format->format.height);
+ else
+ mode = &imx214_modes[0];
+
+
+ __crop->width = mode->width;
+ __crop->height = mode->height;
+
+ __format = __imx214_get_pad_format(imx214, cfg, format->pad,
+ format->which);
+ __format->width = __crop->width;
+ __format->height = __crop->height;
+ __format->code = IMX214_MBUS_CODE;
+ __format->field = V4L2_FIELD_NONE;
+ __format->colorspace = V4L2_COLORSPACE_SRGB;
+ __format->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(__format->colorspace);
+ __format->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true,
+ __format->colorspace, __format->ycbcr_enc);
+ __format->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(__format->colorspace);
+
+ format->format = *__format;
+
+ return 0;
+}
+
+static int imx214_get_selection(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_selection *sel)
+{
+ struct imx214 *imx214 = to_imx214(sd);
+
+ if (sel->target != V4L2_SEL_TGT_CROP)
+ return -EINVAL;
+
+ sel->r = *__imx214_get_pad_crop(imx214, cfg, sel->pad,
+ sel->which);
+ return 0;
+}
+
+static int imx214_entity_init_cfg(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_pad_config *cfg)
+{
+ struct v4l2_subdev_format fmt = { };
+
+ fmt.which = cfg ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
+ fmt.format.width = imx214_modes[0].width;
+ fmt.format.height = imx214_modes[0].height;
+
+ imx214_set_format(subdev, cfg, &fmt);
+
+ return 0;
+}
+
+static int imx214_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct imx214 *imx214 = container_of(ctrl->handler,
+ struct imx214, ctrls);
+ u8 vals[2];
+ int ret;
+
+ /*
+ * Applying V4L2 control value only happens
+ * when power is up for streaming
+ */
+ if (!pm_runtime_get_if_in_use(imx214->dev))
+ return 0;
+
+ switch (ctrl->id) {
+ case V4L2_CID_EXPOSURE:
+ vals[1] = ctrl->val;
+ vals[0] = ctrl->val >> 8;
+ ret = regmap_bulk_write(imx214->regmap, 0x202, vals, 2);
+ if (ret < 0)
+ dev_err(imx214->dev, "Error %d\n", ret);
+ ret = 0;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ pm_runtime_put(imx214->dev);
+
+ return ret;
+}
+
+static const struct v4l2_ctrl_ops imx214_ctrl_ops = {
+ .s_ctrl = imx214_set_ctrl,
+};
+
+#define MAX_CMD 4
+static int imx214_write_table(struct imx214 *imx214,
+ const struct reg_8 table[])
+{
+ u8 vals[MAX_CMD];
+ int ret;
+ int i;
+
+ for (table = table; table->addr != IMX214_TABLE_END ; table++) {
+ if (table->addr == IMX214_TABLE_WAIT_MS) {
+ usleep_range(table->val * 1000,
+ table->val * 1000 + 500);
+ continue;
+ }
+
+ for (i = 0; i < MAX_CMD; i++) {
+ if (table[i].addr != (table[0].addr + i))
+ break;
+ vals[i] = table[i].val;
+ }
+
+ ret = regmap_bulk_write(imx214->regmap, table->addr, vals, i);
+
+ if (ret) {
+ dev_err(imx214->dev, "write_table error: %d\n", ret);
+ return ret;
+ }
+
+ table += i - 1;
+ }
+
+ return 0;
+}
+
+static int imx214_start_streaming(struct imx214 *imx214)
+{
+ int ret;
+ const struct imx214_mode *mode;
+
+ ret = imx214_set_power_on(imx214);
+ if (ret < 0) {
+ dev_err(imx214->dev, "could not set power on %d\n", ret);
+ return ret;
+ }
+
+ ret = imx214_write_table(imx214, mode_table_common);
+ if (ret < 0) {
+ dev_err(imx214->dev, "could not sent common table %d\n", ret);
+ return ret;
+ }
+
+ mode = v4l2_find_nearest_size(imx214_modes,
+ ARRAY_SIZE(imx214_modes), width, height,
+ imx214->fmt.width, imx214->fmt.height);
+ ret = imx214_write_table(imx214, mode->reg_table);
+ if (ret < 0) {
+ dev_err(imx214->dev, "could not sent mode table %d\n", ret);
+ return ret;
+ }
+ ret = v4l2_ctrl_handler_setup(&imx214->ctrls);
+ if (ret < 0) {
+ dev_err(imx214->dev, "could not sync v4l2 controls\n");
+ return ret;
+ }
+ ret = regmap_write(imx214->regmap, 0x100, 1);
+ if (ret < 0) {
+ dev_err(imx214->dev, "could not sent start table %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int imx214_stop_streaming(struct imx214 *imx214)
+{
+ int ret;
+
+ ret = regmap_write(imx214->regmap, 0x100, 0);
+ if (ret < 0)
+ dev_err(imx214->dev, "could not sent stop table %d\n", ret);
+
+ imx214_set_power_off(imx214);
+ return ret;
+}
+
+static int imx214_s_stream(struct v4l2_subdev *subdev, int enable)
+{
+ struct imx214 *imx214 = to_imx214(subdev);
+ int ret;
+
+ if (imx214->streaming == enable)
+ return 0;
+
+ if (enable) {
+ ret = pm_runtime_get_sync(imx214->dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(imx214->dev);
+ return ret;
+ }
+
+ ret = imx214_start_streaming(imx214);
+ if (ret < 0)
+ goto err_rpm_put;
+ } else {
+ ret = imx214_start_streaming(imx214);
+ goto err_rpm_put;
+ }
+
+ imx214->streaming = enable;
+ return 0;
+
+err_rpm_put:
+ pm_runtime_put(imx214->dev);
+ return ret;
+}
+
+static int imx214_g_frame_interval(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_frame_interval *fival)
+{
+ fival->pad = 0;
+ fival->interval.numerator = 1;
+ fival->interval.denominator = IMX214_FPS;
+
+ return 0;
+}
+
+static int imx214_enum_frame_interval(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_frame_interval_enum *fie)
+{
+ const struct imx214_mode *mode;
+
+ if (fie->index != 0)
+ return -EINVAL;
+
+ mode = v4l2_find_nearest_size(imx214_modes,
+ ARRAY_SIZE(imx214_modes), width, height,
+ fie->width, fie->height);
+
+ fie->code = IMX214_MBUS_CODE;
+ fie->width = mode->width;
+ fie->height = mode->height;
+ fie->interval.numerator = 1;
+ fie->interval.denominator = IMX214_FPS;
+
+ return 0;
+}
+
+static const struct v4l2_subdev_video_ops imx214_video_ops = {
+ .s_stream = imx214_s_stream,
+ .g_frame_interval = imx214_g_frame_interval,
+ .s_frame_interval = imx214_g_frame_interval,
+};
+
+static const struct v4l2_subdev_pad_ops imx214_subdev_pad_ops = {
+ .enum_mbus_code = imx214_enum_mbus_code,
+ .enum_frame_size = imx214_enum_frame_size,
+ .enum_frame_interval = imx214_enum_frame_interval,
+ .get_fmt = imx214_get_format,
+ .set_fmt = imx214_set_format,
+ .get_selection = imx214_get_selection,
+ .init_cfg = imx214_entity_init_cfg,
+};
+
+static const struct v4l2_subdev_ops imx214_subdev_ops = {
+ .core = &imx214_core_ops,
+ .video = &imx214_video_ops,
+ .pad = &imx214_subdev_pad_ops,
+};
+
+static const struct regmap_config sensor_regmap_config = {
+ .reg_bits = 16,
+ .val_bits = 8,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static int imx214_get_regulators(struct device *dev, struct imx214 *imx214)
+{
+ int i;
+
+ for (i = 0; i < IMX214_NUM_SUPPLIES; i++)
+ imx214->supplies[i].supply = imx214_supply_name[i];
+
+ return devm_regulator_bulk_get(dev,
+ IMX214_NUM_SUPPLIES,
+ imx214->supplies);
+}
+
+static int imx214_parse_fwnode(struct device *dev)
+{
+ struct fwnode_handle *endpoint;
+ struct v4l2_fwnode_endpoint *bus_cfg;
+ int i;
+ int ret = 0;
+
+ endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL);
+ if (!endpoint) {
+ dev_err(dev, "endpoint node not found\n");
+ return -EINVAL;
+ }
+
+ bus_cfg = v4l2_fwnode_endpoint_alloc_parse(endpoint);
+ if (IS_ERR(bus_cfg)) {
+ dev_err(dev, "parsing endpoint node failed\n");
+ return PTR_ERR(bus_cfg);
+ }
+
+ if (bus_cfg->bus_type != V4L2_MBUS_CSI2) {
+ dev_err(dev, "invalid bus type (%u), must be CSI2 (%u)\n",
+ bus_cfg->bus_type, V4L2_MBUS_CSI2);
+ ret = -EINVAL;
+ goto done;
+ }
+
+ for (i = 0 ; i < bus_cfg->nr_of_link_frequencies; i++)
+ if (bus_cfg->link_frequencies[i] == IMX214_DEFAULT_LINK_FREQ)
+ break;
+
+ if (i == bus_cfg->nr_of_link_frequencies) {
+ dev_err(dev, "link-frequencies %d not supported, Please review your DT\n",
+ IMX214_DEFAULT_LINK_FREQ);
+ ret = -EINVAL;
+ goto done;
+ }
+
+done:
+ v4l2_fwnode_endpoint_free(bus_cfg);
+ fwnode_handle_put(endpoint);
+ return ret;
+}
+
+
+static int __maybe_unused imx214_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct imx214 *imx214 = to_imx214(sd);
+
+ if (imx214->streaming)
+ imx214_stop_streaming(imx214);
+
+ return 0;
+}
+
+static int __maybe_unused imx214_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct imx214 *imx214 = to_imx214(sd);
+ int ret;
+
+ if (imx214->streaming) {
+ ret = imx214_start_streaming(imx214);
+ if (ret)
+ goto error;
+ }
+
+ return 0;
+
+error:
+ imx214_stop_streaming(imx214);
+ imx214->streaming = 0;
+ return ret;
+}
+
+static int imx214_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct imx214 *imx214;
+ int ret;
+ static const s64 link_freq[] = {
+ IMX214_DEFAULT_LINK_FREQ,
+ };
+
+ ret = imx214_parse_fwnode(dev);
+ if (ret)
+ return ret;
+
+ imx214 = devm_kzalloc(dev, sizeof(*imx214), GFP_KERNEL);
+ if (!imx214)
+ return -ENOMEM;
+
+ imx214->dev = dev;
+
+ imx214->xclk = devm_clk_get(dev, NULL);
+ if (IS_ERR(imx214->xclk)) {
+ dev_err(dev, "could not get xclk");
+ return PTR_ERR(imx214->xclk);
+ }
+
+ ret = clk_set_rate(imx214->xclk, IMX214_DEFAULT_CLK_FREQ);
+ if (ret) {
+ dev_err(dev, "could not set xclk frequency\n");
+ return ret;
+ }
+
+ ret = imx214_get_regulators(dev, imx214);
+ if (ret < 0) {
+ dev_err(dev, "cannot get regulators\n");
+ return ret;
+ }
+
+ imx214->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
+ if (IS_ERR(imx214->enable_gpio)) {
+ dev_err(dev, "cannot get enable gpio\n");
+ return PTR_ERR(imx214->enable_gpio);
+ }
+
+ imx214->regmap = devm_regmap_init_i2c(client, &sensor_regmap_config);
+ if (IS_ERR(imx214->regmap)) {
+ dev_err(dev, "regmap init failed\n");
+ return PTR_ERR(imx214->regmap);
+ }
+
+ pm_runtime_set_active(imx214->dev);
+ pm_runtime_enable(imx214->dev);
+ pm_runtime_idle(imx214->dev);
+
+ v4l2_ctrl_handler_init(&imx214->ctrls, 3);
+
+ imx214->pixel_rate = v4l2_ctrl_new_std(&imx214->ctrls, NULL,
+ V4L2_CID_PIXEL_RATE, 0,
+ IMX214_DEFAULT_PIXEL_RATE, 1,
+ IMX214_DEFAULT_PIXEL_RATE);
+ imx214->link_freq = v4l2_ctrl_new_int_menu(&imx214->ctrls, NULL,
+ V4L2_CID_LINK_FREQ,
+ ARRAY_SIZE(link_freq) - 1,
+ 0, link_freq);
+ if (imx214->link_freq)
+ imx214->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+
+ /*
+ * WARNING!
+ * Values obtained reverse engineering blobs and/or devices.
+ * Ranges and functionality might be wrong.
+ *
+ * Sony, please release some register set documentation for the
+ * device.
+ *
+ * Yours sincerely, Ricardo.
+ */
+ imx214->exposure = v4l2_ctrl_new_std(&imx214->ctrls, &imx214_ctrl_ops,
+ V4L2_CID_EXPOSURE,
+ 0, 0xffff, 1, 0x0c70);
+
+ ret = imx214->ctrls.error;
+ if (ret) {
+ dev_err(&client->dev, "%s control init failed (%d)\n",
+ __func__, ret);
+ goto free_ctrl;
+ }
+
+ imx214->sd.ctrl_handler = &imx214->ctrls;
+ ret = v4l2_ctrl_handler_setup(imx214->sd.ctrl_handler);
+ if (ret) {
+ dev_err(&client->dev,
+ "Error %d setting default controls\n", ret);
+ goto free_ctrl;
+ }
+
+ v4l2_i2c_subdev_init(&imx214->sd, client, &imx214_subdev_ops);
+ imx214->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+ imx214->pad.flags = MEDIA_PAD_FL_SOURCE;
+ imx214->sd.dev = &client->dev;
+ imx214->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
+
+ ret = media_entity_pads_init(&imx214->sd.entity, 1, &imx214->pad);
+ if (ret < 0) {
+ dev_err(dev, "could not register media entity\n");
+ goto free_ctrl;
+ }
+
+ imx214_entity_init_cfg(&imx214->sd, NULL);
+
+ ret = v4l2_async_register_subdev_sensor_common(&imx214->sd);
+ if (ret < 0) {
+ dev_err(dev, "could not register v4l2 device\n");
+ goto free_entity;
+ }
+
+ return 0;
+
+free_entity:
+ media_entity_cleanup(&imx214->sd.entity);
+free_ctrl:
+ v4l2_ctrl_handler_free(&imx214->ctrls);
+
+ return ret;
+}
+
+static int imx214_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct imx214 *imx214 = to_imx214(sd);
+
+ v4l2_async_unregister_subdev(&imx214->sd);
+ media_entity_cleanup(&imx214->sd.entity);
+ v4l2_ctrl_handler_free(&imx214->ctrls);
+
+ pm_runtime_disable(&client->dev);
+ pm_runtime_set_suspended(&client->dev);
+
+ return 0;
+}
+
+static const struct of_device_id imx214_of_match[] = {
+ { .compatible = "sony,imx214" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, imx214_of_match);
+
+static const struct dev_pm_ops imx214_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(imx214_suspend, imx214_resume)
+};
+
+static struct i2c_driver imx214_i2c_driver = {
+ .driver = {
+ .of_match_table = imx214_of_match,
+ .pm = &imx214_pm_ops,
+ .name = "imx214",
+ },
+ .probe_new = imx214_probe,
+ .remove = imx214_remove,
+};
+
+module_i2c_driver(imx214_i2c_driver);
+
+MODULE_DESCRIPTION("Sony IMX214 Camera drier");
+MODULE_AUTHOR("Ricardo Ribalda <[email protected]>");
+MODULE_LICENSE("GPL v2");
--
2.19.0
Hi Ricardo,
Just a few more little comments.
On Wed, Oct 03, 2018 at 03:09:51PM +0200, Ricardo Ribalda Delgado wrote:
> Add a V4L2 sub-device driver for the Sony IMX214 image sensor.
> This is a camera sensor using the I2C bus for control and the
> CSI-2 bus for data.
>
> Tested on a DB820c alike board with Intrinsyc Open-Q 13MP camera.
>
> Signed-off-by: Ricardo Ribalda Delgado <[email protected]>
> Reviewed-by: Jacopo Mondi <[email protected]>
> ---
> Changelog from v3:
>
> Sakari Ailus (Thanks!):
> -Enable runtime PM
> -Exposure control
> -Use v4l2_find_nearest_size
>
> Notes:
> - v4l2_find_nearest_size is my new best friend. great hack!
> - I had to disable pm asap to avoid setting any control if we are not in
> streamon, otherwise the qcom i2c would not work.
>
>
>
> MAINTAINERS | 8 +
> drivers/media/i2c/Kconfig | 11 +
> drivers/media/i2c/Makefile | 1 +
> drivers/media/i2c/imx214.c | 1096 ++++++++++++++++++++++++++++++++++++
> 4 files changed, 1116 insertions(+)
> create mode 100644 drivers/media/i2c/imx214.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 9989925f658d..2ae68894e700 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -13521,6 +13521,14 @@ S: Maintained
> F: drivers/ssb/
> F: include/linux/ssb/
>
> +SONY IMX214 SENSOR DRIVER
> +M: Ricardo Ribalda <[email protected]>
> +L: [email protected]
> +T: git git://linuxtv.org/media_tree.git
> +S: Maintained
> +F: drivers/media/i2c/imx214.c
> +F: Documentation/devicetree/bindings/media/i2c/imx214.txt
> +
> SONY IMX258 SENSOR DRIVER
> M: Sakari Ailus <[email protected]>
> L: [email protected]
> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> index bfdb494686bf..870976dee4a2 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -595,6 +595,17 @@ config VIDEO_APTINA_PLL
> config VIDEO_SMIAPP_PLL
> tristate
>
> +config VIDEO_IMX214
> + tristate "Sony IMX214 sensor support"
> + depends on GPIOLIB && I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> + depends on MEDIA_CAMERA_SUPPORT
Please add:
depends on V4L2_FWNODE
> + help
> + This is a Video4Linux2 sensor driver for the Sony
> + IMX214 camera.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called imx214.
> +
> config VIDEO_IMX258
> tristate "Sony IMX258 sensor support"
> depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> index a94eb03d10d4..61305edc6165 100644
> --- a/drivers/media/i2c/Makefile
> +++ b/drivers/media/i2c/Makefile
> @@ -106,6 +106,7 @@ obj-$(CONFIG_VIDEO_I2C) += video-i2c.o
> obj-$(CONFIG_VIDEO_ML86V7667) += ml86v7667.o
> obj-$(CONFIG_VIDEO_OV2659) += ov2659.o
> obj-$(CONFIG_VIDEO_TC358743) += tc358743.o
> +obj-$(CONFIG_VIDEO_IMX214) += imx214.o
> obj-$(CONFIG_VIDEO_IMX258) += imx258.o
> obj-$(CONFIG_VIDEO_IMX274) += imx274.o
>
> diff --git a/drivers/media/i2c/imx214.c b/drivers/media/i2c/imx214.c
> new file mode 100644
> index 000000000000..0668c3a54053
> --- /dev/null
> +++ b/drivers/media/i2c/imx214.c
> @@ -0,0 +1,1096 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * imx214.c - imx214 sensor driver
> + *
> + * Copyright 2018 Qtechnology A/S
> + *
> + * Ricardo Ribalda <[email protected]>
> + */
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
> +#include <media/media-entity.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-fwnode.h>
> +#include <media/v4l2-subdev.h>
> +
> +#define IMX214_DEFAULT_CLK_FREQ 24000000
> +#define IMX214_DEFAULT_LINK_FREQ 480000000
> +#define IMX214_DEFAULT_PIXEL_RATE ((IMX214_DEFAULT_LINK_FREQ * 8LL) / 10)
> +#define IMX214_WIDTH 4096
> +#define IMX214_HEIGHT 2304
> +#define IMX214_FPS 30
> +#define IMX214_MBUS_CODE MEDIA_BUS_FMT_SRGGB10_1X10
> +
> +static const char * const imx214_supply_name[] = {
> + "vdda",
> + "vddd",
> + "vdddo",
> +};
> +
> +#define IMX214_NUM_SUPPLIES ARRAY_SIZE(imx214_supply_name)
> +
> +struct imx214 {
> + struct device *dev;
> + struct clk *xclk;
> + struct regmap *regmap;
> +
> + struct v4l2_subdev sd;
> + struct media_pad pad;
> + struct v4l2_mbus_framefmt fmt;
> + struct v4l2_rect crop;
> +
> + struct v4l2_ctrl_handler ctrls;
> + struct v4l2_ctrl *pixel_rate;
> + struct v4l2_ctrl *link_freq;
> + struct v4l2_ctrl *exposure;
> +
> + struct regulator_bulk_data supplies[IMX214_NUM_SUPPLIES];
> +
> + struct gpio_desc *enable_gpio;
> +
> + bool streaming;
> +};
> +
> +struct reg_8 {
> + u16 addr;
> + u8 val;
> +};
> +
> +enum {
> + IMX214_TABLE_WAIT_MS = 0,
> + IMX214_TABLE_END,
> + IMX214_MAX_RETRIES,
> + IMX214_WAIT_MS
> +};
> +
> +/*From imx214_mode_tbls.h*/
> +static const struct reg_8 mode_4096x2304[] = {
> + {0x0114, 0x03},
> + {0x0220, 0x00},
> + {0x0221, 0x11},
> + {0x0222, 0x01},
> + {0x0340, 0x0C},
> + {0x0341, 0x7A},
> + {0x0342, 0x13},
> + {0x0343, 0x90},
> + {0x0344, 0x00},
> + {0x0345, 0x38},
> + {0x0346, 0x01},
> + {0x0347, 0x98},
> + {0x0348, 0x10},
> + {0x0349, 0x37},
> + {0x034A, 0x0A},
> + {0x034B, 0x97},
> + {0x0381, 0x01},
> + {0x0383, 0x01},
> + {0x0385, 0x01},
> + {0x0387, 0x01},
> + {0x0900, 0x00},
> + {0x0901, 0x00},
> + {0x0902, 0x00},
> + {0x3000, 0x35},
> + {0x3054, 0x01},
> + {0x305C, 0x11},
> +
> + {0x0112, 0x0A},
> + {0x0113, 0x0A},
> + {0x034C, 0x10},
> + {0x034D, 0x00},
> + {0x034E, 0x09},
> + {0x034F, 0x00},
> + {0x0401, 0x00},
> + {0x0404, 0x00},
> + {0x0405, 0x10},
> + {0x0408, 0x00},
> + {0x0409, 0x00},
> + {0x040A, 0x00},
> + {0x040B, 0x00},
> + {0x040C, 0x10},
> + {0x040D, 0x00},
> + {0x040E, 0x09},
> + {0x040F, 0x00},
> +
> + {0x0301, 0x05},
> + {0x0303, 0x02},
> + {0x0305, 0x03},
> + {0x0306, 0x00},
> + {0x0307, 0x96},
> + {0x0309, 0x0A},
> + {0x030B, 0x01},
> + {0x0310, 0x00},
> +
> + {0x0820, 0x12},
> + {0x0821, 0xC0},
> + {0x0822, 0x00},
> + {0x0823, 0x00},
> +
> + {0x3A03, 0x09},
> + {0x3A04, 0x50},
> + {0x3A05, 0x01},
> +
> + {0x0B06, 0x01},
> + {0x30A2, 0x00},
> +
> + {0x30B4, 0x00},
> +
> + {0x3A02, 0xFF},
> +
> + {0x3011, 0x00},
> + {0x3013, 0x01},
> +
> + {0x0202, 0x0C},
> + {0x0203, 0x70},
> + {0x0224, 0x01},
> + {0x0225, 0xF4},
> +
> + {0x0204, 0x00},
> + {0x0205, 0x00},
> + {0x020E, 0x01},
> + {0x020F, 0x00},
> + {0x0210, 0x01},
> + {0x0211, 0x00},
> + {0x0212, 0x01},
> + {0x0213, 0x00},
> + {0x0214, 0x01},
> + {0x0215, 0x00},
> + {0x0216, 0x00},
> + {0x0217, 0x00},
> +
> + {0x4170, 0x00},
> + {0x4171, 0x10},
> + {0x4176, 0x00},
> + {0x4177, 0x3C},
> + {0xAE20, 0x04},
> + {0xAE21, 0x5C},
> +
> + {IMX214_TABLE_WAIT_MS, 10},
> + {0x0138, 0x01},
> + {IMX214_TABLE_END, 0x00}
> +};
> +
> +static const struct reg_8 mode_1920x1080[] = {
> + {0x0114, 0x03},
> + {0x0220, 0x00},
> + {0x0221, 0x11},
> + {0x0222, 0x01},
> + {0x0340, 0x0C},
> + {0x0341, 0x7A},
> + {0x0342, 0x13},
> + {0x0343, 0x90},
> + {0x0344, 0x04},
> + {0x0345, 0x78},
> + {0x0346, 0x03},
> + {0x0347, 0xFC},
> + {0x0348, 0x0B},
> + {0x0349, 0xF7},
> + {0x034A, 0x08},
> + {0x034B, 0x33},
> + {0x0381, 0x01},
> + {0x0383, 0x01},
> + {0x0385, 0x01},
> + {0x0387, 0x01},
> + {0x0900, 0x00},
> + {0x0901, 0x00},
> + {0x0902, 0x00},
> + {0x3000, 0x35},
> + {0x3054, 0x01},
> + {0x305C, 0x11},
> +
> + {0x0112, 0x0A},
> + {0x0113, 0x0A},
> + {0x034C, 0x07},
> + {0x034D, 0x80},
> + {0x034E, 0x04},
> + {0x034F, 0x38},
> + {0x0401, 0x00},
> + {0x0404, 0x00},
> + {0x0405, 0x10},
> + {0x0408, 0x00},
> + {0x0409, 0x00},
> + {0x040A, 0x00},
> + {0x040B, 0x00},
> + {0x040C, 0x07},
> + {0x040D, 0x80},
> + {0x040E, 0x04},
> + {0x040F, 0x38},
> +
> + {0x0301, 0x05},
> + {0x0303, 0x02},
> + {0x0305, 0x03},
> + {0x0306, 0x00},
> + {0x0307, 0x96},
> + {0x0309, 0x0A},
> + {0x030B, 0x01},
> + {0x0310, 0x00},
> +
> + {0x0820, 0x12},
> + {0x0821, 0xC0},
> + {0x0822, 0x00},
> + {0x0823, 0x00},
> +
> + {0x3A03, 0x04},
> + {0x3A04, 0xF8},
> + {0x3A05, 0x02},
> +
> + {0x0B06, 0x01},
> + {0x30A2, 0x00},
> +
> + {0x30B4, 0x00},
> +
> + {0x3A02, 0xFF},
> +
> + {0x3011, 0x00},
> + {0x3013, 0x01},
> +
> + {0x0202, 0x0C},
> + {0x0203, 0x70},
> + {0x0224, 0x01},
> + {0x0225, 0xF4},
> +
> + {0x0204, 0x00},
> + {0x0205, 0x00},
> + {0x020E, 0x01},
> + {0x020F, 0x00},
> + {0x0210, 0x01},
> + {0x0211, 0x00},
> + {0x0212, 0x01},
> + {0x0213, 0x00},
> + {0x0214, 0x01},
> + {0x0215, 0x00},
> + {0x0216, 0x00},
> + {0x0217, 0x00},
> +
> + {0x4170, 0x00},
> + {0x4171, 0x10},
> + {0x4176, 0x00},
> + {0x4177, 0x3C},
> + {0xAE20, 0x04},
> + {0xAE21, 0x5C},
> +
> + {IMX214_TABLE_WAIT_MS, 10},
> + {0x0138, 0x01},
> + {IMX214_TABLE_END, 0x00}
> +};
> +
> +static const struct reg_8 mode_table_common[] = {
> + /* software reset */
> +
> + /* software standby settings */
> + {0x0100, 0x00},
> +
> + /* ATR setting */
> + {0x9300, 0x02},
> +
> + /* external clock setting */
> + {0x0136, 0x18},
> + {0x0137, 0x00},
> +
> + /* global setting */
> + /* basic config */
> + {0x0101, 0x00},
> + {0x0105, 0x01},
> + {0x0106, 0x01},
> + {0x4550, 0x02},
> + {0x4601, 0x00},
> + {0x4642, 0x05},
> + {0x6227, 0x11},
> + {0x6276, 0x00},
> + {0x900E, 0x06},
> + {0xA802, 0x90},
> + {0xA803, 0x11},
> + {0xA804, 0x62},
> + {0xA805, 0x77},
> + {0xA806, 0xAE},
> + {0xA807, 0x34},
> + {0xA808, 0xAE},
> + {0xA809, 0x35},
> + {0xA80A, 0x62},
> + {0xA80B, 0x83},
> + {0xAE33, 0x00},
> +
> + /* analog setting */
> + {0x4174, 0x00},
> + {0x4175, 0x11},
> + {0x4612, 0x29},
> + {0x461B, 0x12},
> + {0x461F, 0x06},
> + {0x4635, 0x07},
> + {0x4637, 0x30},
> + {0x463F, 0x18},
> + {0x4641, 0x0D},
> + {0x465B, 0x12},
> + {0x465F, 0x11},
> + {0x4663, 0x11},
> + {0x4667, 0x0F},
> + {0x466F, 0x0F},
> + {0x470E, 0x09},
> + {0x4909, 0xAB},
> + {0x490B, 0x95},
> + {0x4915, 0x5D},
> + {0x4A5F, 0xFF},
> + {0x4A61, 0xFF},
> + {0x4A73, 0x62},
> + {0x4A85, 0x00},
> + {0x4A87, 0xFF},
> +
> + /* embedded data */
> + {0x5041, 0x04},
> + {0x583C, 0x04},
> + {0x620E, 0x04},
> + {0x6EB2, 0x01},
> + {0x6EB3, 0x00},
> + {0x9300, 0x02},
> +
> + /* imagequality */
> + /* HDR setting */
> + {0x3001, 0x07},
> + {0x6D12, 0x3F},
> + {0x6D13, 0xFF},
> + {0x9344, 0x03},
> + {0x9706, 0x10},
> + {0x9707, 0x03},
> + {0x9708, 0x03},
> + {0x9E04, 0x01},
> + {0x9E05, 0x00},
> + {0x9E0C, 0x01},
> + {0x9E0D, 0x02},
> + {0x9E24, 0x00},
> + {0x9E25, 0x8C},
> + {0x9E26, 0x00},
> + {0x9E27, 0x94},
> + {0x9E28, 0x00},
> + {0x9E29, 0x96},
> +
> + /* CNR parameter setting */
> + {0x69DB, 0x01},
> +
> + /* Moire reduction */
> + {0x6957, 0x01},
> +
> + /* image enhancment */
> + {0x6987, 0x17},
> + {0x698A, 0x03},
> + {0x698B, 0x03},
> +
> + /* white balanace */
> + {0x0B8E, 0x01},
> + {0x0B8F, 0x00},
> + {0x0B90, 0x01},
> + {0x0B91, 0x00},
> + {0x0B92, 0x01},
> + {0x0B93, 0x00},
> + {0x0B94, 0x01},
> + {0x0B95, 0x00},
> +
> + /* ATR setting */
> + {0x6E50, 0x00},
> + {0x6E51, 0x32},
> + {0x9340, 0x00},
> + {0x9341, 0x3C},
> + {0x9342, 0x03},
> + {0x9343, 0xFF},
> + {IMX214_TABLE_END, 0x00}
> +};
> +
> +/*
> + * Declare modes in order, from biggest
> + * to smallest height.
> + */
> +static const struct imx214_mode {
> + u32 width;
> + u32 height;
> + const struct reg_8 *reg_table;
> +} imx214_modes[] = {
> + {
> + .width = 4096,
> + .height = 2304,
> + .reg_table = mode_4096x2304,
> + },
> + {
> + .width = 1920,
> + .height = 1080,
> + .reg_table = mode_1920x1080,
> + },
> +};
> +
> +static inline struct imx214 *to_imx214(struct v4l2_subdev *sd)
> +{
> + return container_of(sd, struct imx214, sd);
> +}
> +
> +static int imx214_set_power_on(struct imx214 *imx214)
> +{
> + int ret;
> +
> + ret = regulator_bulk_enable(IMX214_NUM_SUPPLIES, imx214->supplies);
> + if (ret < 0) {
> + dev_err(imx214->dev, "failed to enable regulators: %d\n", ret);
> + return ret;
> + }
> +
> + usleep_range(2000, 3000);
> +
> + ret = clk_prepare_enable(imx214->xclk);
> + if (ret < 0) {
> + regulator_bulk_disable(IMX214_NUM_SUPPLIES, imx214->supplies);
> + dev_err(imx214->dev, "clk prepare enable failed\n");
> + return ret;
> + }
> +
> + gpiod_set_value_cansleep(imx214->enable_gpio, 1);
> + usleep_range(12000, 15000);
> +
> + return 0;
> +}
> +
> +static void imx214_set_power_off(struct imx214 *imx214)
> +{
> + gpiod_set_value_cansleep(imx214->enable_gpio, 0);
> +
> + clk_disable_unprepare(imx214->xclk);
> +
> + regulator_bulk_disable(IMX214_NUM_SUPPLIES, imx214->supplies);
> + usleep_range(10, 20);
> +}
> +
> +static int imx214_enum_mbus_code(struct v4l2_subdev *sd,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_mbus_code_enum *code)
> +{
> + if (code->index > 0)
> + return -EINVAL;
> +
> + code->code = IMX214_MBUS_CODE;
> +
> + return 0;
> +}
> +
> +static int imx214_enum_frame_size(struct v4l2_subdev *subdev,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_frame_size_enum *fse)
> +{
> + if (fse->code != IMX214_MBUS_CODE)
> + return -EINVAL;
> +
> + if (fse->index >= ARRAY_SIZE(imx214_modes))
array_index_nospec() ?? I find it scary that you'd need that in drivers.
:-o
> + return -EINVAL;
> +
> + fse->min_width = fse->max_width = imx214_modes[fse->index].width;
> + fse->min_height = fse->max_height = imx214_modes[fse->index].height;
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_VIDEO_ADV_DEBUG
> +static int imx214_s_register(struct v4l2_subdev *subdev,
> + const struct v4l2_dbg_register *reg)
> +{
> + struct imx214 *imx214 = container_of(subdev, struct imx214, sd);
> +
> + return regmap_write(imx214->regmap, reg->reg, reg->val);
> +}
> +
> +static int imx214_g_register(struct v4l2_subdev *subdev,
> + struct v4l2_dbg_register *reg)
> +{
> + struct imx214 *imx214 = container_of(subdev, struct imx214, sd);
> + unsigned int aux;
> + int ret;
> +
> + reg->size = 1;
> + ret = regmap_read(imx214->regmap, reg->reg, &aux);
> + reg->val = aux;
> +
> + return ret;
> +}
> +#endif
> +
> +static const struct v4l2_subdev_core_ops imx214_core_ops = {
> +#ifdef CONFIG_VIDEO_ADV_DEBUG
> + .g_register = imx214_g_register,
> + .s_register = imx214_s_register,
> +#endif
> +};
> +
> +static struct v4l2_mbus_framefmt *
> +__imx214_get_pad_format(struct imx214 *imx214,
> + struct v4l2_subdev_pad_config *cfg,
> + unsigned int pad,
> + enum v4l2_subdev_format_whence which)
> +{
> + switch (which) {
> + case V4L2_SUBDEV_FORMAT_TRY:
> + return v4l2_subdev_get_try_format(&imx214->sd, cfg, pad);
> + case V4L2_SUBDEV_FORMAT_ACTIVE:
> + return &imx214->fmt;
> + default:
> + return NULL;
> + }
> +}
> +
> +static int imx214_get_format(struct v4l2_subdev *sd,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_format *format)
> +{
> + struct imx214 *imx214 = to_imx214(sd);
> +
> + format->format = *__imx214_get_pad_format(imx214, cfg, format->pad,
> + format->which);
> +
> + return 0;
> +}
> +
> +static struct v4l2_rect *
> +__imx214_get_pad_crop(struct imx214 *imx214, struct v4l2_subdev_pad_config *cfg,
> + unsigned int pad, enum v4l2_subdev_format_whence which)
> +{
> + switch (which) {
> + case V4L2_SUBDEV_FORMAT_TRY:
> + return v4l2_subdev_get_try_crop(&imx214->sd, cfg, pad);
> + case V4L2_SUBDEV_FORMAT_ACTIVE:
> + return &imx214->crop;
> + default:
> + return NULL;
> + }
> +}
> +
> +static int imx214_set_format(struct v4l2_subdev *sd,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_format *format)
> +{
> + struct imx214 *imx214 = to_imx214(sd);
> + struct v4l2_mbus_framefmt *__format;
> + struct v4l2_rect *__crop;
> + const struct imx214_mode *mode;
> +
> + __crop = __imx214_get_pad_crop(imx214, cfg, format->pad, format->which);
> +
> + if (format)
> + mode = v4l2_find_nearest_size(imx214_modes,
> + ARRAY_SIZE(imx214_modes), width, height,
> + format->format.width, format->format.height);
> + else
> + mode = &imx214_modes[0];
> +
> +
Extra newline.
> + __crop->width = mode->width;
> + __crop->height = mode->height;
> +
> + __format = __imx214_get_pad_format(imx214, cfg, format->pad,
> + format->which);
> + __format->width = __crop->width;
> + __format->height = __crop->height;
> + __format->code = IMX214_MBUS_CODE;
> + __format->field = V4L2_FIELD_NONE;
> + __format->colorspace = V4L2_COLORSPACE_SRGB;
> + __format->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(__format->colorspace);
> + __format->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true,
> + __format->colorspace, __format->ycbcr_enc);
> + __format->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(__format->colorspace);
> +
> + format->format = *__format;
You'll need to serialise the above --- otherwise multiple calls setting the
format may be ongoing at the same time, assigning the format to
format->format.
The same for get_format.
> +
> + return 0;
> +}
> +
> +static int imx214_get_selection(struct v4l2_subdev *sd,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_selection *sel)
> +{
> + struct imx214 *imx214 = to_imx214(sd);
> +
> + if (sel->target != V4L2_SEL_TGT_CROP)
> + return -EINVAL;
> +
> + sel->r = *__imx214_get_pad_crop(imx214, cfg, sel->pad,
> + sel->which);
Same here.
> + return 0;
> +}
> +
> +static int imx214_entity_init_cfg(struct v4l2_subdev *subdev,
> + struct v4l2_subdev_pad_config *cfg)
> +{
> + struct v4l2_subdev_format fmt = { };
> +
> + fmt.which = cfg ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
> + fmt.format.width = imx214_modes[0].width;
> + fmt.format.height = imx214_modes[0].height;
> +
> + imx214_set_format(subdev, cfg, &fmt);
> +
> + return 0;
> +}
> +
> +static int imx214_set_ctrl(struct v4l2_ctrl *ctrl)
> +{
> + struct imx214 *imx214 = container_of(ctrl->handler,
> + struct imx214, ctrls);
> + u8 vals[2];
> + int ret;
> +
> + /*
> + * Applying V4L2 control value only happens
> + * when power is up for streaming
> + */
> + if (!pm_runtime_get_if_in_use(imx214->dev))
> + return 0;
> +
> + switch (ctrl->id) {
> + case V4L2_CID_EXPOSURE:
> + vals[1] = ctrl->val;
> + vals[0] = ctrl->val >> 8;
> + ret = regmap_bulk_write(imx214->regmap, 0x202, vals, 2);
> + if (ret < 0)
> + dev_err(imx214->dev, "Error %d\n", ret);
> + ret = 0;
> + break;
> +
> + default:
> + return -EINVAL;
Oops!
> + }
> +
> + pm_runtime_put(imx214->dev);
> +
> + return ret;
> +}
> +
> +static const struct v4l2_ctrl_ops imx214_ctrl_ops = {
> + .s_ctrl = imx214_set_ctrl,
> +};
> +
> +#define MAX_CMD 4
> +static int imx214_write_table(struct imx214 *imx214,
> + const struct reg_8 table[])
> +{
> + u8 vals[MAX_CMD];
> + int ret;
> + int i;
> +
> + for (table = table; table->addr != IMX214_TABLE_END ; table++) {
> + if (table->addr == IMX214_TABLE_WAIT_MS) {
> + usleep_range(table->val * 1000,
> + table->val * 1000 + 500);
> + continue;
> + }
> +
> + for (i = 0; i < MAX_CMD; i++) {
> + if (table[i].addr != (table[0].addr + i))
> + break;
> + vals[i] = table[i].val;
> + }
> +
> + ret = regmap_bulk_write(imx214->regmap, table->addr, vals, i);
> +
> + if (ret) {
> + dev_err(imx214->dev, "write_table error: %d\n", ret);
> + return ret;
> + }
> +
> + table += i - 1;
> + }
> +
> + return 0;
> +}
> +
> +static int imx214_start_streaming(struct imx214 *imx214)
> +{
> + int ret;
It'd be nice to arrange variable declarations in a similar way in the
functions. I'd just swap the above and below line.
> + const struct imx214_mode *mode;
> +
> + ret = imx214_set_power_on(imx214);
> + if (ret < 0) {
> + dev_err(imx214->dev, "could not set power on %d\n", ret);
> + return ret;
> + }
> +
> + ret = imx214_write_table(imx214, mode_table_common);
> + if (ret < 0) {
> + dev_err(imx214->dev, "could not sent common table %d\n", ret);
> + return ret;
> + }
> +
> + mode = v4l2_find_nearest_size(imx214_modes,
> + ARRAY_SIZE(imx214_modes), width, height,
> + imx214->fmt.width, imx214->fmt.height);
> + ret = imx214_write_table(imx214, mode->reg_table);
> + if (ret < 0) {
> + dev_err(imx214->dev, "could not sent mode table %d\n", ret);
> + return ret;
> + }
> + ret = v4l2_ctrl_handler_setup(&imx214->ctrls);
> + if (ret < 0) {
> + dev_err(imx214->dev, "could not sync v4l2 controls\n");
> + return ret;
> + }
> + ret = regmap_write(imx214->regmap, 0x100, 1);
> + if (ret < 0) {
> + dev_err(imx214->dev, "could not sent start table %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int imx214_stop_streaming(struct imx214 *imx214)
> +{
> + int ret;
> +
> + ret = regmap_write(imx214->regmap, 0x100, 0);
> + if (ret < 0)
> + dev_err(imx214->dev, "could not sent stop table %d\n", ret);
> +
> + imx214_set_power_off(imx214);
> + return ret;
> +}
> +
> +static int imx214_s_stream(struct v4l2_subdev *subdev, int enable)
> +{
> + struct imx214 *imx214 = to_imx214(subdev);
> + int ret;
> +
> + if (imx214->streaming == enable)
> + return 0;
> +
> + if (enable) {
> + ret = pm_runtime_get_sync(imx214->dev);
> + if (ret < 0) {
> + pm_runtime_put_noidle(imx214->dev);
> + return ret;
> + }
> +
> + ret = imx214_start_streaming(imx214);
> + if (ret < 0)
> + goto err_rpm_put;
> + } else {
> + ret = imx214_start_streaming(imx214);
> + goto err_rpm_put;
> + }
> +
> + imx214->streaming = enable;
> + return 0;
> +
> +err_rpm_put:
> + pm_runtime_put(imx214->dev);
> + return ret;
> +}
> +
> +static int imx214_g_frame_interval(struct v4l2_subdev *subdev,
> + struct v4l2_subdev_frame_interval *fival)
> +{
> + fival->pad = 0;
> + fival->interval.numerator = 1;
> + fival->interval.denominator = IMX214_FPS;
> +
> + return 0;
> +}
> +
> +static int imx214_enum_frame_interval(struct v4l2_subdev *subdev,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_frame_interval_enum *fie)
> +{
> + const struct imx214_mode *mode;
> +
> + if (fie->index != 0)
> + return -EINVAL;
> +
> + mode = v4l2_find_nearest_size(imx214_modes,
> + ARRAY_SIZE(imx214_modes), width, height,
> + fie->width, fie->height);
> +
> + fie->code = IMX214_MBUS_CODE;
> + fie->width = mode->width;
> + fie->height = mode->height;
> + fie->interval.numerator = 1;
> + fie->interval.denominator = IMX214_FPS;
> +
> + return 0;
> +}
> +
> +static const struct v4l2_subdev_video_ops imx214_video_ops = {
> + .s_stream = imx214_s_stream,
> + .g_frame_interval = imx214_g_frame_interval,
> + .s_frame_interval = imx214_g_frame_interval,
> +};
> +
> +static const struct v4l2_subdev_pad_ops imx214_subdev_pad_ops = {
> + .enum_mbus_code = imx214_enum_mbus_code,
> + .enum_frame_size = imx214_enum_frame_size,
> + .enum_frame_interval = imx214_enum_frame_interval,
> + .get_fmt = imx214_get_format,
> + .set_fmt = imx214_set_format,
> + .get_selection = imx214_get_selection,
> + .init_cfg = imx214_entity_init_cfg,
> +};
> +
> +static const struct v4l2_subdev_ops imx214_subdev_ops = {
> + .core = &imx214_core_ops,
> + .video = &imx214_video_ops,
> + .pad = &imx214_subdev_pad_ops,
> +};
> +
> +static const struct regmap_config sensor_regmap_config = {
> + .reg_bits = 16,
> + .val_bits = 8,
> + .cache_type = REGCACHE_RBTREE,
> +};
> +
> +static int imx214_get_regulators(struct device *dev, struct imx214 *imx214)
> +{
> + int i;
unsigned int
> +
> + for (i = 0; i < IMX214_NUM_SUPPLIES; i++)
> + imx214->supplies[i].supply = imx214_supply_name[i];
> +
> + return devm_regulator_bulk_get(dev,
> + IMX214_NUM_SUPPLIES,
> + imx214->supplies);
> +}
> +
> +static int imx214_parse_fwnode(struct device *dev)
> +{
> + struct fwnode_handle *endpoint;
> + struct v4l2_fwnode_endpoint *bus_cfg;
> + int i;
unsigned int
> + int ret = 0;
> +
> + endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL);
> + if (!endpoint) {
> + dev_err(dev, "endpoint node not found\n");
> + return -EINVAL;
> + }
> +
> + bus_cfg = v4l2_fwnode_endpoint_alloc_parse(endpoint);
Have you seen:
<URL:https://git.linuxtv.org/sailus/media_tree.git/log/?h=v4l2-fwnode>
I'm hopeful this would be in media tree master Soon.
> + if (IS_ERR(bus_cfg)) {
> + dev_err(dev, "parsing endpoint node failed\n");
> + return PTR_ERR(bus_cfg);
> + }
> +
> + if (bus_cfg->bus_type != V4L2_MBUS_CSI2) {
> + dev_err(dev, "invalid bus type (%u), must be CSI2 (%u)\n",
> + bus_cfg->bus_type, V4L2_MBUS_CSI2);
> + ret = -EINVAL;
> + goto done;
> + }
> +
> + for (i = 0 ; i < bus_cfg->nr_of_link_frequencies; i++)
> + if (bus_cfg->link_frequencies[i] == IMX214_DEFAULT_LINK_FREQ)
> + break;
> +
> + if (i == bus_cfg->nr_of_link_frequencies) {
> + dev_err(dev, "link-frequencies %d not supported, Please review your DT\n",
> + IMX214_DEFAULT_LINK_FREQ);
> + ret = -EINVAL;
> + goto done;
> + }
> +
> +done:
> + v4l2_fwnode_endpoint_free(bus_cfg);
> + fwnode_handle_put(endpoint);
> + return ret;
> +}
> +
> +
> +static int __maybe_unused imx214_suspend(struct device *dev)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct v4l2_subdev *sd = i2c_get_clientdata(client);
> + struct imx214 *imx214 = to_imx214(sd);
> +
> + if (imx214->streaming)
> + imx214_stop_streaming(imx214);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused imx214_resume(struct device *dev)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct v4l2_subdev *sd = i2c_get_clientdata(client);
> + struct imx214 *imx214 = to_imx214(sd);
> + int ret;
> +
> + if (imx214->streaming) {
> + ret = imx214_start_streaming(imx214);
> + if (ret)
> + goto error;
> + }
> +
> + return 0;
> +
> +error:
> + imx214_stop_streaming(imx214);
> + imx214->streaming = 0;
> + return ret;
> +}
> +
> +static int imx214_probe(struct i2c_client *client)
> +{
> + struct device *dev = &client->dev;
> + struct imx214 *imx214;
> + int ret;
Declare ret as last?
> + static const s64 link_freq[] = {
> + IMX214_DEFAULT_LINK_FREQ,
> + };
> +
> + ret = imx214_parse_fwnode(dev);
> + if (ret)
> + return ret;
> +
> + imx214 = devm_kzalloc(dev, sizeof(*imx214), GFP_KERNEL);
> + if (!imx214)
> + return -ENOMEM;
> +
> + imx214->dev = dev;
> +
> + imx214->xclk = devm_clk_get(dev, NULL);
> + if (IS_ERR(imx214->xclk)) {
> + dev_err(dev, "could not get xclk");
> + return PTR_ERR(imx214->xclk);
> + }
> +
> + ret = clk_set_rate(imx214->xclk, IMX214_DEFAULT_CLK_FREQ);
> + if (ret) {
> + dev_err(dev, "could not set xclk frequency\n");
> + return ret;
> + }
> +
> + ret = imx214_get_regulators(dev, imx214);
> + if (ret < 0) {
> + dev_err(dev, "cannot get regulators\n");
> + return ret;
> + }
> +
> + imx214->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
> + if (IS_ERR(imx214->enable_gpio)) {
> + dev_err(dev, "cannot get enable gpio\n");
> + return PTR_ERR(imx214->enable_gpio);
> + }
> +
> + imx214->regmap = devm_regmap_init_i2c(client, &sensor_regmap_config);
> + if (IS_ERR(imx214->regmap)) {
> + dev_err(dev, "regmap init failed\n");
> + return PTR_ERR(imx214->regmap);
> + }
> +
> + pm_runtime_set_active(imx214->dev);
> + pm_runtime_enable(imx214->dev);
> + pm_runtime_idle(imx214->dev);
I think it'd help moving this just before the point where you access
hardware.
If things fail and you'll return an error, please remember:
pm_runtime_disable(imx214->dev);
> +
> + v4l2_ctrl_handler_init(&imx214->ctrls, 3);
> +
> + imx214->pixel_rate = v4l2_ctrl_new_std(&imx214->ctrls, NULL,
> + V4L2_CID_PIXEL_RATE, 0,
> + IMX214_DEFAULT_PIXEL_RATE, 1,
> + IMX214_DEFAULT_PIXEL_RATE);
> + imx214->link_freq = v4l2_ctrl_new_int_menu(&imx214->ctrls, NULL,
> + V4L2_CID_LINK_FREQ,
> + ARRAY_SIZE(link_freq) - 1,
> + 0, link_freq);
> + if (imx214->link_freq)
> + imx214->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> +
> + /*
> + * WARNING!
> + * Values obtained reverse engineering blobs and/or devices.
> + * Ranges and functionality might be wrong.
> + *
> + * Sony, please release some register set documentation for the
> + * device.
> + *
> + * Yours sincerely, Ricardo.
> + */
> + imx214->exposure = v4l2_ctrl_new_std(&imx214->ctrls, &imx214_ctrl_ops,
> + V4L2_CID_EXPOSURE,
> + 0, 0xffff, 1, 0x0c70);
The exposure is in lines so it can't exceed frame height + blanking.
There's a marginal, too. I don't know what it might be for this sensor
though. Usually it's small, such as 8 or 16. The image will almost
certainly be garbled if you exceed the allowed value.
> +
> + ret = imx214->ctrls.error;
> + if (ret) {
> + dev_err(&client->dev, "%s control init failed (%d)\n",
> + __func__, ret);
> + goto free_ctrl;
> + }
> +
> + imx214->sd.ctrl_handler = &imx214->ctrls;
> + ret = v4l2_ctrl_handler_setup(imx214->sd.ctrl_handler);
> + if (ret) {
> + dev_err(&client->dev,
> + "Error %d setting default controls\n", ret);
> + goto free_ctrl;
> + }
> +
> + v4l2_i2c_subdev_init(&imx214->sd, client, &imx214_subdev_ops);
> + imx214->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> + imx214->pad.flags = MEDIA_PAD_FL_SOURCE;
> + imx214->sd.dev = &client->dev;
> + imx214->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
> +
> + ret = media_entity_pads_init(&imx214->sd.entity, 1, &imx214->pad);
> + if (ret < 0) {
> + dev_err(dev, "could not register media entity\n");
> + goto free_ctrl;
> + }
> +
> + imx214_entity_init_cfg(&imx214->sd, NULL);
> +
> + ret = v4l2_async_register_subdev_sensor_common(&imx214->sd);
> + if (ret < 0) {
> + dev_err(dev, "could not register v4l2 device\n");
> + goto free_entity;
> + }
> +
> + return 0;
> +
> +free_entity:
> + media_entity_cleanup(&imx214->sd.entity);
> +free_ctrl:
> + v4l2_ctrl_handler_free(&imx214->ctrls);
> +
> + return ret;
> +}
> +
> +static int imx214_remove(struct i2c_client *client)
> +{
> + struct v4l2_subdev *sd = i2c_get_clientdata(client);
> + struct imx214 *imx214 = to_imx214(sd);
> +
> + v4l2_async_unregister_subdev(&imx214->sd);
> + media_entity_cleanup(&imx214->sd.entity);
> + v4l2_ctrl_handler_free(&imx214->ctrls);
> +
> + pm_runtime_disable(&client->dev);
> + pm_runtime_set_suspended(&client->dev);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id imx214_of_match[] = {
> + { .compatible = "sony,imx214" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, imx214_of_match);
> +
> +static const struct dev_pm_ops imx214_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(imx214_suspend, imx214_resume)
You'll need the runtime PM ops as well, not only the system ones. Please
see e.g. the smiapp driver --- the runtime_resume and runtime_suspend
callbacks replace the s_power() callback that then can be removed.
> +};
> +
> +static struct i2c_driver imx214_i2c_driver = {
> + .driver = {
> + .of_match_table = imx214_of_match,
> + .pm = &imx214_pm_ops,
> + .name = "imx214",
> + },
> + .probe_new = imx214_probe,
> + .remove = imx214_remove,
> +};
> +
> +module_i2c_driver(imx214_i2c_driver);
> +
> +MODULE_DESCRIPTION("Sony IMX214 Camera drier");
> +MODULE_AUTHOR("Ricardo Ribalda <[email protected]>");
> +MODULE_LICENSE("GPL v2");
--
Kind regards,
Sakari Ailus
[email protected]
Hi Sakari
Thanks for your comments. I am pushing the new version to
https://github.com/ribalda/linux/tree/imx214-v6
Tomorrow morning after testing it on real hw I will send it to the list.
Compared to v1, the driver now looks really good :)
On Wed, Oct 3, 2018 at 9:47 PM Sakari Ailus
<[email protected]> wrote:
>
> Hi Ricardo,
>
> Just a few more little comments.
>
> On Wed, Oct 03, 2018 at 03:09:51PM +0200, Ricardo Ribalda Delgado wrote:
> > Add a V4L2 sub-device driver for the Sony IMX214 image sensor.
> > This is a camera sensor using the I2C bus for control and the
> > CSI-2 bus for data.
> >
> > Tested on a DB820c alike board with Intrinsyc Open-Q 13MP camera.
> >
> > Signed-off-by: Ricardo Ribalda Delgado <[email protected]>
> > Reviewed-by: Jacopo Mondi <[email protected]>
> > ---
> > Changelog from v3:
> >
> > Sakari Ailus (Thanks!):
> > -Enable runtime PM
> > -Exposure control
> > -Use v4l2_find_nearest_size
> >
> > Notes:
> > - v4l2_find_nearest_size is my new best friend. great hack!
> > - I had to disable pm asap to avoid setting any control if we are not in
> > streamon, otherwise the qcom i2c would not work.
> >
> >
> >
> > MAINTAINERS | 8 +
> > drivers/media/i2c/Kconfig | 11 +
> > drivers/media/i2c/Makefile | 1 +
> > drivers/media/i2c/imx214.c | 1096 ++++++++++++++++++++++++++++++++++++
> > 4 files changed, 1116 insertions(+)
> > create mode 100644 drivers/media/i2c/imx214.c
> >
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 9989925f658d..2ae68894e700 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -13521,6 +13521,14 @@ S: Maintained
> > F: drivers/ssb/
> > F: include/linux/ssb/
> >
> > +SONY IMX214 SENSOR DRIVER
> > +M: Ricardo Ribalda <[email protected]>
> > +L: [email protected]
> > +T: git git://linuxtv.org/media_tree.git
> > +S: Maintained
> > +F: drivers/media/i2c/imx214.c
> > +F: Documentation/devicetree/bindings/media/i2c/imx214.txt
> > +
> > SONY IMX258 SENSOR DRIVER
> > M: Sakari Ailus <[email protected]>
> > L: [email protected]
> > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> > index bfdb494686bf..870976dee4a2 100644
> > --- a/drivers/media/i2c/Kconfig
> > +++ b/drivers/media/i2c/Kconfig
> > @@ -595,6 +595,17 @@ config VIDEO_APTINA_PLL
> > config VIDEO_SMIAPP_PLL
> > tristate
> >
> > +config VIDEO_IMX214
> > + tristate "Sony IMX214 sensor support"
> > + depends on GPIOLIB && I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> > + depends on MEDIA_CAMERA_SUPPORT
>
> Please add:
>
> depends on V4L2_FWNODE
>
> > + help
> > + This is a Video4Linux2 sensor driver for the Sony
> > + IMX214 camera.
> > +
> > + To compile this driver as a module, choose M here: the
> > + module will be called imx214.
> > +
> > config VIDEO_IMX258
> > tristate "Sony IMX258 sensor support"
> > depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> > diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> > index a94eb03d10d4..61305edc6165 100644
> > --- a/drivers/media/i2c/Makefile
> > +++ b/drivers/media/i2c/Makefile
> > @@ -106,6 +106,7 @@ obj-$(CONFIG_VIDEO_I2C) += video-i2c.o
> > obj-$(CONFIG_VIDEO_ML86V7667) += ml86v7667.o
> > obj-$(CONFIG_VIDEO_OV2659) += ov2659.o
> > obj-$(CONFIG_VIDEO_TC358743) += tc358743.o
> > +obj-$(CONFIG_VIDEO_IMX214) += imx214.o
> > obj-$(CONFIG_VIDEO_IMX258) += imx258.o
> > obj-$(CONFIG_VIDEO_IMX274) += imx274.o
> >
> > diff --git a/drivers/media/i2c/imx214.c b/drivers/media/i2c/imx214.c
> > new file mode 100644
> > index 000000000000..0668c3a54053
> > --- /dev/null
> > +++ b/drivers/media/i2c/imx214.c
> > @@ -0,0 +1,1096 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * imx214.c - imx214 sensor driver
> > + *
> > + * Copyright 2018 Qtechnology A/S
> > + *
> > + * Ricardo Ribalda <[email protected]>
> > + */
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/gpio/consumer.h>
> > +#include <linux/i2c.h>
> > +#include <linux/module.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/regmap.h>
> > +#include <linux/regulator/consumer.h>
> > +#include <media/media-entity.h>
> > +#include <media/v4l2-ctrls.h>
> > +#include <media/v4l2-fwnode.h>
> > +#include <media/v4l2-subdev.h>
> > +
> > +#define IMX214_DEFAULT_CLK_FREQ 24000000
> > +#define IMX214_DEFAULT_LINK_FREQ 480000000
> > +#define IMX214_DEFAULT_PIXEL_RATE ((IMX214_DEFAULT_LINK_FREQ * 8LL) / 10)
> > +#define IMX214_WIDTH 4096
> > +#define IMX214_HEIGHT 2304
> > +#define IMX214_FPS 30
> > +#define IMX214_MBUS_CODE MEDIA_BUS_FMT_SRGGB10_1X10
> > +
> > +static const char * const imx214_supply_name[] = {
> > + "vdda",
> > + "vddd",
> > + "vdddo",
> > +};
> > +
> > +#define IMX214_NUM_SUPPLIES ARRAY_SIZE(imx214_supply_name)
> > +
> > +struct imx214 {
> > + struct device *dev;
> > + struct clk *xclk;
> > + struct regmap *regmap;
> > +
> > + struct v4l2_subdev sd;
> > + struct media_pad pad;
> > + struct v4l2_mbus_framefmt fmt;
> > + struct v4l2_rect crop;
> > +
> > + struct v4l2_ctrl_handler ctrls;
> > + struct v4l2_ctrl *pixel_rate;
> > + struct v4l2_ctrl *link_freq;
> > + struct v4l2_ctrl *exposure;
> > +
> > + struct regulator_bulk_data supplies[IMX214_NUM_SUPPLIES];
> > +
> > + struct gpio_desc *enable_gpio;
> > +
> > + bool streaming;
> > +};
> > +
> > +struct reg_8 {
> > + u16 addr;
> > + u8 val;
> > +};
> > +
> > +enum {
> > + IMX214_TABLE_WAIT_MS = 0,
> > + IMX214_TABLE_END,
> > + IMX214_MAX_RETRIES,
> > + IMX214_WAIT_MS
> > +};
> > +
> > +/*From imx214_mode_tbls.h*/
> > +static const struct reg_8 mode_4096x2304[] = {
> > + {0x0114, 0x03},
> > + {0x0220, 0x00},
> > + {0x0221, 0x11},
> > + {0x0222, 0x01},
> > + {0x0340, 0x0C},
> > + {0x0341, 0x7A},
> > + {0x0342, 0x13},
> > + {0x0343, 0x90},
> > + {0x0344, 0x00},
> > + {0x0345, 0x38},
> > + {0x0346, 0x01},
> > + {0x0347, 0x98},
> > + {0x0348, 0x10},
> > + {0x0349, 0x37},
> > + {0x034A, 0x0A},
> > + {0x034B, 0x97},
> > + {0x0381, 0x01},
> > + {0x0383, 0x01},
> > + {0x0385, 0x01},
> > + {0x0387, 0x01},
> > + {0x0900, 0x00},
> > + {0x0901, 0x00},
> > + {0x0902, 0x00},
> > + {0x3000, 0x35},
> > + {0x3054, 0x01},
> > + {0x305C, 0x11},
> > +
> > + {0x0112, 0x0A},
> > + {0x0113, 0x0A},
> > + {0x034C, 0x10},
> > + {0x034D, 0x00},
> > + {0x034E, 0x09},
> > + {0x034F, 0x00},
> > + {0x0401, 0x00},
> > + {0x0404, 0x00},
> > + {0x0405, 0x10},
> > + {0x0408, 0x00},
> > + {0x0409, 0x00},
> > + {0x040A, 0x00},
> > + {0x040B, 0x00},
> > + {0x040C, 0x10},
> > + {0x040D, 0x00},
> > + {0x040E, 0x09},
> > + {0x040F, 0x00},
> > +
> > + {0x0301, 0x05},
> > + {0x0303, 0x02},
> > + {0x0305, 0x03},
> > + {0x0306, 0x00},
> > + {0x0307, 0x96},
> > + {0x0309, 0x0A},
> > + {0x030B, 0x01},
> > + {0x0310, 0x00},
> > +
> > + {0x0820, 0x12},
> > + {0x0821, 0xC0},
> > + {0x0822, 0x00},
> > + {0x0823, 0x00},
> > +
> > + {0x3A03, 0x09},
> > + {0x3A04, 0x50},
> > + {0x3A05, 0x01},
> > +
> > + {0x0B06, 0x01},
> > + {0x30A2, 0x00},
> > +
> > + {0x30B4, 0x00},
> > +
> > + {0x3A02, 0xFF},
> > +
> > + {0x3011, 0x00},
> > + {0x3013, 0x01},
> > +
> > + {0x0202, 0x0C},
> > + {0x0203, 0x70},
> > + {0x0224, 0x01},
> > + {0x0225, 0xF4},
> > +
> > + {0x0204, 0x00},
> > + {0x0205, 0x00},
> > + {0x020E, 0x01},
> > + {0x020F, 0x00},
> > + {0x0210, 0x01},
> > + {0x0211, 0x00},
> > + {0x0212, 0x01},
> > + {0x0213, 0x00},
> > + {0x0214, 0x01},
> > + {0x0215, 0x00},
> > + {0x0216, 0x00},
> > + {0x0217, 0x00},
> > +
> > + {0x4170, 0x00},
> > + {0x4171, 0x10},
> > + {0x4176, 0x00},
> > + {0x4177, 0x3C},
> > + {0xAE20, 0x04},
> > + {0xAE21, 0x5C},
> > +
> > + {IMX214_TABLE_WAIT_MS, 10},
> > + {0x0138, 0x01},
> > + {IMX214_TABLE_END, 0x00}
> > +};
> > +
> > +static const struct reg_8 mode_1920x1080[] = {
> > + {0x0114, 0x03},
> > + {0x0220, 0x00},
> > + {0x0221, 0x11},
> > + {0x0222, 0x01},
> > + {0x0340, 0x0C},
> > + {0x0341, 0x7A},
> > + {0x0342, 0x13},
> > + {0x0343, 0x90},
> > + {0x0344, 0x04},
> > + {0x0345, 0x78},
> > + {0x0346, 0x03},
> > + {0x0347, 0xFC},
> > + {0x0348, 0x0B},
> > + {0x0349, 0xF7},
> > + {0x034A, 0x08},
> > + {0x034B, 0x33},
> > + {0x0381, 0x01},
> > + {0x0383, 0x01},
> > + {0x0385, 0x01},
> > + {0x0387, 0x01},
> > + {0x0900, 0x00},
> > + {0x0901, 0x00},
> > + {0x0902, 0x00},
> > + {0x3000, 0x35},
> > + {0x3054, 0x01},
> > + {0x305C, 0x11},
> > +
> > + {0x0112, 0x0A},
> > + {0x0113, 0x0A},
> > + {0x034C, 0x07},
> > + {0x034D, 0x80},
> > + {0x034E, 0x04},
> > + {0x034F, 0x38},
> > + {0x0401, 0x00},
> > + {0x0404, 0x00},
> > + {0x0405, 0x10},
> > + {0x0408, 0x00},
> > + {0x0409, 0x00},
> > + {0x040A, 0x00},
> > + {0x040B, 0x00},
> > + {0x040C, 0x07},
> > + {0x040D, 0x80},
> > + {0x040E, 0x04},
> > + {0x040F, 0x38},
> > +
> > + {0x0301, 0x05},
> > + {0x0303, 0x02},
> > + {0x0305, 0x03},
> > + {0x0306, 0x00},
> > + {0x0307, 0x96},
> > + {0x0309, 0x0A},
> > + {0x030B, 0x01},
> > + {0x0310, 0x00},
> > +
> > + {0x0820, 0x12},
> > + {0x0821, 0xC0},
> > + {0x0822, 0x00},
> > + {0x0823, 0x00},
> > +
> > + {0x3A03, 0x04},
> > + {0x3A04, 0xF8},
> > + {0x3A05, 0x02},
> > +
> > + {0x0B06, 0x01},
> > + {0x30A2, 0x00},
> > +
> > + {0x30B4, 0x00},
> > +
> > + {0x3A02, 0xFF},
> > +
> > + {0x3011, 0x00},
> > + {0x3013, 0x01},
> > +
> > + {0x0202, 0x0C},
> > + {0x0203, 0x70},
> > + {0x0224, 0x01},
> > + {0x0225, 0xF4},
> > +
> > + {0x0204, 0x00},
> > + {0x0205, 0x00},
> > + {0x020E, 0x01},
> > + {0x020F, 0x00},
> > + {0x0210, 0x01},
> > + {0x0211, 0x00},
> > + {0x0212, 0x01},
> > + {0x0213, 0x00},
> > + {0x0214, 0x01},
> > + {0x0215, 0x00},
> > + {0x0216, 0x00},
> > + {0x0217, 0x00},
> > +
> > + {0x4170, 0x00},
> > + {0x4171, 0x10},
> > + {0x4176, 0x00},
> > + {0x4177, 0x3C},
> > + {0xAE20, 0x04},
> > + {0xAE21, 0x5C},
> > +
> > + {IMX214_TABLE_WAIT_MS, 10},
> > + {0x0138, 0x01},
> > + {IMX214_TABLE_END, 0x00}
> > +};
> > +
> > +static const struct reg_8 mode_table_common[] = {
> > + /* software reset */
> > +
> > + /* software standby settings */
> > + {0x0100, 0x00},
> > +
> > + /* ATR setting */
> > + {0x9300, 0x02},
> > +
> > + /* external clock setting */
> > + {0x0136, 0x18},
> > + {0x0137, 0x00},
> > +
> > + /* global setting */
> > + /* basic config */
> > + {0x0101, 0x00},
> > + {0x0105, 0x01},
> > + {0x0106, 0x01},
> > + {0x4550, 0x02},
> > + {0x4601, 0x00},
> > + {0x4642, 0x05},
> > + {0x6227, 0x11},
> > + {0x6276, 0x00},
> > + {0x900E, 0x06},
> > + {0xA802, 0x90},
> > + {0xA803, 0x11},
> > + {0xA804, 0x62},
> > + {0xA805, 0x77},
> > + {0xA806, 0xAE},
> > + {0xA807, 0x34},
> > + {0xA808, 0xAE},
> > + {0xA809, 0x35},
> > + {0xA80A, 0x62},
> > + {0xA80B, 0x83},
> > + {0xAE33, 0x00},
> > +
> > + /* analog setting */
> > + {0x4174, 0x00},
> > + {0x4175, 0x11},
> > + {0x4612, 0x29},
> > + {0x461B, 0x12},
> > + {0x461F, 0x06},
> > + {0x4635, 0x07},
> > + {0x4637, 0x30},
> > + {0x463F, 0x18},
> > + {0x4641, 0x0D},
> > + {0x465B, 0x12},
> > + {0x465F, 0x11},
> > + {0x4663, 0x11},
> > + {0x4667, 0x0F},
> > + {0x466F, 0x0F},
> > + {0x470E, 0x09},
> > + {0x4909, 0xAB},
> > + {0x490B, 0x95},
> > + {0x4915, 0x5D},
> > + {0x4A5F, 0xFF},
> > + {0x4A61, 0xFF},
> > + {0x4A73, 0x62},
> > + {0x4A85, 0x00},
> > + {0x4A87, 0xFF},
> > +
> > + /* embedded data */
> > + {0x5041, 0x04},
> > + {0x583C, 0x04},
> > + {0x620E, 0x04},
> > + {0x6EB2, 0x01},
> > + {0x6EB3, 0x00},
> > + {0x9300, 0x02},
> > +
> > + /* imagequality */
> > + /* HDR setting */
> > + {0x3001, 0x07},
> > + {0x6D12, 0x3F},
> > + {0x6D13, 0xFF},
> > + {0x9344, 0x03},
> > + {0x9706, 0x10},
> > + {0x9707, 0x03},
> > + {0x9708, 0x03},
> > + {0x9E04, 0x01},
> > + {0x9E05, 0x00},
> > + {0x9E0C, 0x01},
> > + {0x9E0D, 0x02},
> > + {0x9E24, 0x00},
> > + {0x9E25, 0x8C},
> > + {0x9E26, 0x00},
> > + {0x9E27, 0x94},
> > + {0x9E28, 0x00},
> > + {0x9E29, 0x96},
> > +
> > + /* CNR parameter setting */
> > + {0x69DB, 0x01},
> > +
> > + /* Moire reduction */
> > + {0x6957, 0x01},
> > +
> > + /* image enhancment */
> > + {0x6987, 0x17},
> > + {0x698A, 0x03},
> > + {0x698B, 0x03},
> > +
> > + /* white balanace */
> > + {0x0B8E, 0x01},
> > + {0x0B8F, 0x00},
> > + {0x0B90, 0x01},
> > + {0x0B91, 0x00},
> > + {0x0B92, 0x01},
> > + {0x0B93, 0x00},
> > + {0x0B94, 0x01},
> > + {0x0B95, 0x00},
> > +
> > + /* ATR setting */
> > + {0x6E50, 0x00},
> > + {0x6E51, 0x32},
> > + {0x9340, 0x00},
> > + {0x9341, 0x3C},
> > + {0x9342, 0x03},
> > + {0x9343, 0xFF},
> > + {IMX214_TABLE_END, 0x00}
> > +};
> > +
> > +/*
> > + * Declare modes in order, from biggest
> > + * to smallest height.
> > + */
> > +static const struct imx214_mode {
> > + u32 width;
> > + u32 height;
> > + const struct reg_8 *reg_table;
> > +} imx214_modes[] = {
> > + {
> > + .width = 4096,
> > + .height = 2304,
> > + .reg_table = mode_4096x2304,
> > + },
> > + {
> > + .width = 1920,
> > + .height = 1080,
> > + .reg_table = mode_1920x1080,
> > + },
> > +};
> > +
> > +static inline struct imx214 *to_imx214(struct v4l2_subdev *sd)
> > +{
> > + return container_of(sd, struct imx214, sd);
> > +}
> > +
> > +static int imx214_set_power_on(struct imx214 *imx214)
> > +{
> > + int ret;
> > +
> > + ret = regulator_bulk_enable(IMX214_NUM_SUPPLIES, imx214->supplies);
> > + if (ret < 0) {
> > + dev_err(imx214->dev, "failed to enable regulators: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + usleep_range(2000, 3000);
> > +
> > + ret = clk_prepare_enable(imx214->xclk);
> > + if (ret < 0) {
> > + regulator_bulk_disable(IMX214_NUM_SUPPLIES, imx214->supplies);
> > + dev_err(imx214->dev, "clk prepare enable failed\n");
> > + return ret;
> > + }
> > +
> > + gpiod_set_value_cansleep(imx214->enable_gpio, 1);
> > + usleep_range(12000, 15000);
> > +
> > + return 0;
> > +}
> > +
> > +static void imx214_set_power_off(struct imx214 *imx214)
> > +{
> > + gpiod_set_value_cansleep(imx214->enable_gpio, 0);
> > +
> > + clk_disable_unprepare(imx214->xclk);
> > +
> > + regulator_bulk_disable(IMX214_NUM_SUPPLIES, imx214->supplies);
> > + usleep_range(10, 20);
> > +}
> > +
> > +static int imx214_enum_mbus_code(struct v4l2_subdev *sd,
> > + struct v4l2_subdev_pad_config *cfg,
> > + struct v4l2_subdev_mbus_code_enum *code)
> > +{
> > + if (code->index > 0)
> > + return -EINVAL;
> > +
> > + code->code = IMX214_MBUS_CODE;
> > +
> > + return 0;
> > +}
> > +
> > +static int imx214_enum_frame_size(struct v4l2_subdev *subdev,
> > + struct v4l2_subdev_pad_config *cfg,
> > + struct v4l2_subdev_frame_size_enum *fse)
> > +{
> > + if (fse->code != IMX214_MBUS_CODE)
> > + return -EINVAL;
> > +
> > + if (fse->index >= ARRAY_SIZE(imx214_modes))
>
> array_index_nospec() ?? I find it scary that you'd need that in drivers.
> :-o
>
> > + return -EINVAL;
> > +
> > + fse->min_width = fse->max_width = imx214_modes[fse->index].width;
> > + fse->min_height = fse->max_height = imx214_modes[fse->index].height;
> > +
> > + return 0;
> > +}
> > +
> > +#ifdef CONFIG_VIDEO_ADV_DEBUG
> > +static int imx214_s_register(struct v4l2_subdev *subdev,
> > + const struct v4l2_dbg_register *reg)
> > +{
> > + struct imx214 *imx214 = container_of(subdev, struct imx214, sd);
> > +
> > + return regmap_write(imx214->regmap, reg->reg, reg->val);
> > +}
> > +
> > +static int imx214_g_register(struct v4l2_subdev *subdev,
> > + struct v4l2_dbg_register *reg)
> > +{
> > + struct imx214 *imx214 = container_of(subdev, struct imx214, sd);
> > + unsigned int aux;
> > + int ret;
> > +
> > + reg->size = 1;
> > + ret = regmap_read(imx214->regmap, reg->reg, &aux);
> > + reg->val = aux;
> > +
> > + return ret;
> > +}
> > +#endif
> > +
> > +static const struct v4l2_subdev_core_ops imx214_core_ops = {
> > +#ifdef CONFIG_VIDEO_ADV_DEBUG
> > + .g_register = imx214_g_register,
> > + .s_register = imx214_s_register,
> > +#endif
> > +};
> > +
> > +static struct v4l2_mbus_framefmt *
> > +__imx214_get_pad_format(struct imx214 *imx214,
> > + struct v4l2_subdev_pad_config *cfg,
> > + unsigned int pad,
> > + enum v4l2_subdev_format_whence which)
> > +{
> > + switch (which) {
> > + case V4L2_SUBDEV_FORMAT_TRY:
> > + return v4l2_subdev_get_try_format(&imx214->sd, cfg, pad);
> > + case V4L2_SUBDEV_FORMAT_ACTIVE:
> > + return &imx214->fmt;
> > + default:
> > + return NULL;
> > + }
> > +}
> > +
> > +static int imx214_get_format(struct v4l2_subdev *sd,
> > + struct v4l2_subdev_pad_config *cfg,
> > + struct v4l2_subdev_format *format)
> > +{
> > + struct imx214 *imx214 = to_imx214(sd);
> > +
> > + format->format = *__imx214_get_pad_format(imx214, cfg, format->pad,
> > + format->which);
> > +
> > + return 0;
> > +}
> > +
> > +static struct v4l2_rect *
> > +__imx214_get_pad_crop(struct imx214 *imx214, struct v4l2_subdev_pad_config *cfg,
> > + unsigned int pad, enum v4l2_subdev_format_whence which)
> > +{
> > + switch (which) {
> > + case V4L2_SUBDEV_FORMAT_TRY:
> > + return v4l2_subdev_get_try_crop(&imx214->sd, cfg, pad);
> > + case V4L2_SUBDEV_FORMAT_ACTIVE:
> > + return &imx214->crop;
> > + default:
> > + return NULL;
> > + }
> > +}
> > +
> > +static int imx214_set_format(struct v4l2_subdev *sd,
> > + struct v4l2_subdev_pad_config *cfg,
> > + struct v4l2_subdev_format *format)
> > +{
> > + struct imx214 *imx214 = to_imx214(sd);
> > + struct v4l2_mbus_framefmt *__format;
> > + struct v4l2_rect *__crop;
> > + const struct imx214_mode *mode;
> > +
> > + __crop = __imx214_get_pad_crop(imx214, cfg, format->pad, format->which);
> > +
> > + if (format)
> > + mode = v4l2_find_nearest_size(imx214_modes,
> > + ARRAY_SIZE(imx214_modes), width, height,
> > + format->format.width, format->format.height);
> > + else
> > + mode = &imx214_modes[0];
> > +
> > +
>
> Extra newline.
>
> > + __crop->width = mode->width;
> > + __crop->height = mode->height;
> > +
> > + __format = __imx214_get_pad_format(imx214, cfg, format->pad,
> > + format->which);
> > + __format->width = __crop->width;
> > + __format->height = __crop->height;
> > + __format->code = IMX214_MBUS_CODE;
> > + __format->field = V4L2_FIELD_NONE;
> > + __format->colorspace = V4L2_COLORSPACE_SRGB;
> > + __format->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(__format->colorspace);
> > + __format->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true,
> > + __format->colorspace, __format->ycbcr_enc);
> > + __format->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(__format->colorspace);
> > +
> > + format->format = *__format;
>
> You'll need to serialise the above --- otherwise multiple calls setting the
> format may be ongoing at the same time, assigning the format to
> format->format.
>
> The same for get_format.
>
> > +
> > + return 0;
> > +}
> > +
> > +static int imx214_get_selection(struct v4l2_subdev *sd,
> > + struct v4l2_subdev_pad_config *cfg,
> > + struct v4l2_subdev_selection *sel)
> > +{
> > + struct imx214 *imx214 = to_imx214(sd);
> > +
> > + if (sel->target != V4L2_SEL_TGT_CROP)
> > + return -EINVAL;
> > +
> > + sel->r = *__imx214_get_pad_crop(imx214, cfg, sel->pad,
> > + sel->which);
>
> Same here.
>
> > + return 0;
> > +}
> > +
> > +static int imx214_entity_init_cfg(struct v4l2_subdev *subdev,
> > + struct v4l2_subdev_pad_config *cfg)
> > +{
> > + struct v4l2_subdev_format fmt = { };
> > +
> > + fmt.which = cfg ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
> > + fmt.format.width = imx214_modes[0].width;
> > + fmt.format.height = imx214_modes[0].height;
> > +
> > + imx214_set_format(subdev, cfg, &fmt);
> > +
> > + return 0;
> > +}
> > +
> > +static int imx214_set_ctrl(struct v4l2_ctrl *ctrl)
> > +{
> > + struct imx214 *imx214 = container_of(ctrl->handler,
> > + struct imx214, ctrls);
> > + u8 vals[2];
> > + int ret;
> > +
> > + /*
> > + * Applying V4L2 control value only happens
> > + * when power is up for streaming
> > + */
> > + if (!pm_runtime_get_if_in_use(imx214->dev))
> > + return 0;
> > +
> > + switch (ctrl->id) {
> > + case V4L2_CID_EXPOSURE:
> > + vals[1] = ctrl->val;
> > + vals[0] = ctrl->val >> 8;
> > + ret = regmap_bulk_write(imx214->regmap, 0x202, vals, 2);
> > + if (ret < 0)
> > + dev_err(imx214->dev, "Error %d\n", ret);
> > + ret = 0;
> > + break;
> > +
> > + default:
> > + return -EINVAL;
>
> Oops!
>
> > + }
> > +
> > + pm_runtime_put(imx214->dev);
> > +
> > + return ret;
> > +}
> > +
> > +static const struct v4l2_ctrl_ops imx214_ctrl_ops = {
> > + .s_ctrl = imx214_set_ctrl,
> > +};
> > +
> > +#define MAX_CMD 4
> > +static int imx214_write_table(struct imx214 *imx214,
> > + const struct reg_8 table[])
> > +{
> > + u8 vals[MAX_CMD];
> > + int ret;
> > + int i;
> > +
> > + for (table = table; table->addr != IMX214_TABLE_END ; table++) {
> > + if (table->addr == IMX214_TABLE_WAIT_MS) {
> > + usleep_range(table->val * 1000,
> > + table->val * 1000 + 500);
> > + continue;
> > + }
> > +
> > + for (i = 0; i < MAX_CMD; i++) {
> > + if (table[i].addr != (table[0].addr + i))
> > + break;
> > + vals[i] = table[i].val;
> > + }
> > +
> > + ret = regmap_bulk_write(imx214->regmap, table->addr, vals, i);
> > +
> > + if (ret) {
> > + dev_err(imx214->dev, "write_table error: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + table += i - 1;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int imx214_start_streaming(struct imx214 *imx214)
> > +{
> > + int ret;
>
> It'd be nice to arrange variable declarations in a similar way in the
> functions. I'd just swap the above and below line.
>
> > + const struct imx214_mode *mode;
> > +
> > + ret = imx214_set_power_on(imx214);
> > + if (ret < 0) {
> > + dev_err(imx214->dev, "could not set power on %d\n", ret);
> > + return ret;
> > + }
> > +
> > + ret = imx214_write_table(imx214, mode_table_common);
> > + if (ret < 0) {
> > + dev_err(imx214->dev, "could not sent common table %d\n", ret);
> > + return ret;
> > + }
> > +
> > + mode = v4l2_find_nearest_size(imx214_modes,
> > + ARRAY_SIZE(imx214_modes), width, height,
> > + imx214->fmt.width, imx214->fmt.height);
> > + ret = imx214_write_table(imx214, mode->reg_table);
> > + if (ret < 0) {
> > + dev_err(imx214->dev, "could not sent mode table %d\n", ret);
> > + return ret;
> > + }
> > + ret = v4l2_ctrl_handler_setup(&imx214->ctrls);
> > + if (ret < 0) {
> > + dev_err(imx214->dev, "could not sync v4l2 controls\n");
> > + return ret;
> > + }
> > + ret = regmap_write(imx214->regmap, 0x100, 1);
> > + if (ret < 0) {
> > + dev_err(imx214->dev, "could not sent start table %d\n", ret);
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int imx214_stop_streaming(struct imx214 *imx214)
> > +{
> > + int ret;
> > +
> > + ret = regmap_write(imx214->regmap, 0x100, 0);
> > + if (ret < 0)
> > + dev_err(imx214->dev, "could not sent stop table %d\n", ret);
> > +
> > + imx214_set_power_off(imx214);
> > + return ret;
> > +}
> > +
> > +static int imx214_s_stream(struct v4l2_subdev *subdev, int enable)
> > +{
> > + struct imx214 *imx214 = to_imx214(subdev);
> > + int ret;
> > +
> > + if (imx214->streaming == enable)
> > + return 0;
> > +
> > + if (enable) {
> > + ret = pm_runtime_get_sync(imx214->dev);
> > + if (ret < 0) {
> > + pm_runtime_put_noidle(imx214->dev);
> > + return ret;
> > + }
> > +
> > + ret = imx214_start_streaming(imx214);
> > + if (ret < 0)
> > + goto err_rpm_put;
> > + } else {
> > + ret = imx214_start_streaming(imx214);
> > + goto err_rpm_put;
> > + }
> > +
> > + imx214->streaming = enable;
> > + return 0;
> > +
> > +err_rpm_put:
> > + pm_runtime_put(imx214->dev);
> > + return ret;
> > +}
> > +
> > +static int imx214_g_frame_interval(struct v4l2_subdev *subdev,
> > + struct v4l2_subdev_frame_interval *fival)
> > +{
> > + fival->pad = 0;
> > + fival->interval.numerator = 1;
> > + fival->interval.denominator = IMX214_FPS;
> > +
> > + return 0;
> > +}
> > +
> > +static int imx214_enum_frame_interval(struct v4l2_subdev *subdev,
> > + struct v4l2_subdev_pad_config *cfg,
> > + struct v4l2_subdev_frame_interval_enum *fie)
> > +{
> > + const struct imx214_mode *mode;
> > +
> > + if (fie->index != 0)
> > + return -EINVAL;
> > +
> > + mode = v4l2_find_nearest_size(imx214_modes,
> > + ARRAY_SIZE(imx214_modes), width, height,
> > + fie->width, fie->height);
> > +
> > + fie->code = IMX214_MBUS_CODE;
> > + fie->width = mode->width;
> > + fie->height = mode->height;
> > + fie->interval.numerator = 1;
> > + fie->interval.denominator = IMX214_FPS;
> > +
> > + return 0;
> > +}
> > +
> > +static const struct v4l2_subdev_video_ops imx214_video_ops = {
> > + .s_stream = imx214_s_stream,
> > + .g_frame_interval = imx214_g_frame_interval,
> > + .s_frame_interval = imx214_g_frame_interval,
> > +};
> > +
> > +static const struct v4l2_subdev_pad_ops imx214_subdev_pad_ops = {
> > + .enum_mbus_code = imx214_enum_mbus_code,
> > + .enum_frame_size = imx214_enum_frame_size,
> > + .enum_frame_interval = imx214_enum_frame_interval,
> > + .get_fmt = imx214_get_format,
> > + .set_fmt = imx214_set_format,
> > + .get_selection = imx214_get_selection,
> > + .init_cfg = imx214_entity_init_cfg,
> > +};
> > +
> > +static const struct v4l2_subdev_ops imx214_subdev_ops = {
> > + .core = &imx214_core_ops,
> > + .video = &imx214_video_ops,
> > + .pad = &imx214_subdev_pad_ops,
> > +};
> > +
> > +static const struct regmap_config sensor_regmap_config = {
> > + .reg_bits = 16,
> > + .val_bits = 8,
> > + .cache_type = REGCACHE_RBTREE,
> > +};
> > +
> > +static int imx214_get_regulators(struct device *dev, struct imx214 *imx214)
> > +{
> > + int i;
>
> unsigned int
>
> > +
> > + for (i = 0; i < IMX214_NUM_SUPPLIES; i++)
> > + imx214->supplies[i].supply = imx214_supply_name[i];
> > +
> > + return devm_regulator_bulk_get(dev,
> > + IMX214_NUM_SUPPLIES,
> > + imx214->supplies);
> > +}
> > +
> > +static int imx214_parse_fwnode(struct device *dev)
> > +{
> > + struct fwnode_handle *endpoint;
> > + struct v4l2_fwnode_endpoint *bus_cfg;
> > + int i;
>
> unsigned int
>
> > + int ret = 0;
> > +
> > + endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL);
> > + if (!endpoint) {
> > + dev_err(dev, "endpoint node not found\n");
> > + return -EINVAL;
> > + }
> > +
> > + bus_cfg = v4l2_fwnode_endpoint_alloc_parse(endpoint);
>
> Have you seen:
>
> <URL:https://git.linuxtv.org/sailus/media_tree.git/log/?h=v4l2-fwnode>
>
> I'm hopeful this would be in media tree master Soon.
>
> > + if (IS_ERR(bus_cfg)) {
> > + dev_err(dev, "parsing endpoint node failed\n");
> > + return PTR_ERR(bus_cfg);
> > + }
> > +
> > + if (bus_cfg->bus_type != V4L2_MBUS_CSI2) {
> > + dev_err(dev, "invalid bus type (%u), must be CSI2 (%u)\n",
> > + bus_cfg->bus_type, V4L2_MBUS_CSI2);
> > + ret = -EINVAL;
> > + goto done;
> > + }
> > +
> > + for (i = 0 ; i < bus_cfg->nr_of_link_frequencies; i++)
> > + if (bus_cfg->link_frequencies[i] == IMX214_DEFAULT_LINK_FREQ)
> > + break;
> > +
> > + if (i == bus_cfg->nr_of_link_frequencies) {
> > + dev_err(dev, "link-frequencies %d not supported, Please review your DT\n",
> > + IMX214_DEFAULT_LINK_FREQ);
> > + ret = -EINVAL;
> > + goto done;
> > + }
> > +
> > +done:
> > + v4l2_fwnode_endpoint_free(bus_cfg);
> > + fwnode_handle_put(endpoint);
> > + return ret;
> > +}
> > +
> > +
> > +static int __maybe_unused imx214_suspend(struct device *dev)
> > +{
> > + struct i2c_client *client = to_i2c_client(dev);
> > + struct v4l2_subdev *sd = i2c_get_clientdata(client);
> > + struct imx214 *imx214 = to_imx214(sd);
> > +
> > + if (imx214->streaming)
> > + imx214_stop_streaming(imx214);
> > +
> > + return 0;
> > +}
> > +
> > +static int __maybe_unused imx214_resume(struct device *dev)
> > +{
> > + struct i2c_client *client = to_i2c_client(dev);
> > + struct v4l2_subdev *sd = i2c_get_clientdata(client);
> > + struct imx214 *imx214 = to_imx214(sd);
> > + int ret;
> > +
> > + if (imx214->streaming) {
> > + ret = imx214_start_streaming(imx214);
> > + if (ret)
> > + goto error;
> > + }
> > +
> > + return 0;
> > +
> > +error:
> > + imx214_stop_streaming(imx214);
> > + imx214->streaming = 0;
> > + return ret;
> > +}
> > +
> > +static int imx214_probe(struct i2c_client *client)
> > +{
> > + struct device *dev = &client->dev;
> > + struct imx214 *imx214;
> > + int ret;
>
> Declare ret as last?
>
> > + static const s64 link_freq[] = {
> > + IMX214_DEFAULT_LINK_FREQ,
> > + };
> > +
> > + ret = imx214_parse_fwnode(dev);
> > + if (ret)
> > + return ret;
> > +
> > + imx214 = devm_kzalloc(dev, sizeof(*imx214), GFP_KERNEL);
> > + if (!imx214)
> > + return -ENOMEM;
> > +
> > + imx214->dev = dev;
> > +
> > + imx214->xclk = devm_clk_get(dev, NULL);
> > + if (IS_ERR(imx214->xclk)) {
> > + dev_err(dev, "could not get xclk");
> > + return PTR_ERR(imx214->xclk);
> > + }
> > +
> > + ret = clk_set_rate(imx214->xclk, IMX214_DEFAULT_CLK_FREQ);
> > + if (ret) {
> > + dev_err(dev, "could not set xclk frequency\n");
> > + return ret;
> > + }
> > +
> > + ret = imx214_get_regulators(dev, imx214);
> > + if (ret < 0) {
> > + dev_err(dev, "cannot get regulators\n");
> > + return ret;
> > + }
> > +
> > + imx214->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
> > + if (IS_ERR(imx214->enable_gpio)) {
> > + dev_err(dev, "cannot get enable gpio\n");
> > + return PTR_ERR(imx214->enable_gpio);
> > + }
> > +
> > + imx214->regmap = devm_regmap_init_i2c(client, &sensor_regmap_config);
> > + if (IS_ERR(imx214->regmap)) {
> > + dev_err(dev, "regmap init failed\n");
> > + return PTR_ERR(imx214->regmap);
> > + }
> > +
> > + pm_runtime_set_active(imx214->dev);
> > + pm_runtime_enable(imx214->dev);
> > + pm_runtime_idle(imx214->dev);
>
> I think it'd help moving this just before the point where you access
> hardware.
>
> If things fail and you'll return an error, please remember:
>
> pm_runtime_disable(imx214->dev);
>
> > +
> > + v4l2_ctrl_handler_init(&imx214->ctrls, 3);
> > +
> > + imx214->pixel_rate = v4l2_ctrl_new_std(&imx214->ctrls, NULL,
> > + V4L2_CID_PIXEL_RATE, 0,
> > + IMX214_DEFAULT_PIXEL_RATE, 1,
> > + IMX214_DEFAULT_PIXEL_RATE);
> > + imx214->link_freq = v4l2_ctrl_new_int_menu(&imx214->ctrls, NULL,
> > + V4L2_CID_LINK_FREQ,
> > + ARRAY_SIZE(link_freq) - 1,
> > + 0, link_freq);
> > + if (imx214->link_freq)
> > + imx214->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> > +
> > + /*
> > + * WARNING!
> > + * Values obtained reverse engineering blobs and/or devices.
> > + * Ranges and functionality might be wrong.
> > + *
> > + * Sony, please release some register set documentation for the
> > + * device.
> > + *
> > + * Yours sincerely, Ricardo.
> > + */
> > + imx214->exposure = v4l2_ctrl_new_std(&imx214->ctrls, &imx214_ctrl_ops,
> > + V4L2_CID_EXPOSURE,
> > + 0, 0xffff, 1, 0x0c70);
>
> The exposure is in lines so it can't exceed frame height + blanking.
> There's a marginal, too. I don't know what it might be for this sensor
> though. Usually it's small, such as 8 or 16. The image will almost
> certainly be garbled if you exceed the allowed value.
>Seems that this sensor
On this sensor what I am experiencing instead of garbage is that the
fps gets reduced. So I believe it is fine to
set it up this way.
> > +
> > + ret = imx214->ctrls.error;
> > + if (ret) {
> > + dev_err(&client->dev, "%s control init failed (%d)\n",
> > + __func__, ret);
> > + goto free_ctrl;
> > + }
> > +
> > + imx214->sd.ctrl_handler = &imx214->ctrls;
> > + ret = v4l2_ctrl_handler_setup(imx214->sd.ctrl_handler);
> > + if (ret) {
> > + dev_err(&client->dev,
> > + "Error %d setting default controls\n", ret);
> > + goto free_ctrl;
> > + }
> > +
> > + v4l2_i2c_subdev_init(&imx214->sd, client, &imx214_subdev_ops);
> > + imx214->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> > + imx214->pad.flags = MEDIA_PAD_FL_SOURCE;
> > + imx214->sd.dev = &client->dev;
> > + imx214->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
> > +
> > + ret = media_entity_pads_init(&imx214->sd.entity, 1, &imx214->pad);
> > + if (ret < 0) {
> > + dev_err(dev, "could not register media entity\n");
> > + goto free_ctrl;
> > + }
> > +
> > + imx214_entity_init_cfg(&imx214->sd, NULL);
> > +
> > + ret = v4l2_async_register_subdev_sensor_common(&imx214->sd);
> > + if (ret < 0) {
> > + dev_err(dev, "could not register v4l2 device\n");
> > + goto free_entity;
> > + }
> > +
> > + return 0;
> > +
> > +free_entity:
> > + media_entity_cleanup(&imx214->sd.entity);
> > +free_ctrl:
> > + v4l2_ctrl_handler_free(&imx214->ctrls);
> > +
> > + return ret;
> > +}
> > +
> > +static int imx214_remove(struct i2c_client *client)
> > +{
> > + struct v4l2_subdev *sd = i2c_get_clientdata(client);
> > + struct imx214 *imx214 = to_imx214(sd);
> > +
> > + v4l2_async_unregister_subdev(&imx214->sd);
> > + media_entity_cleanup(&imx214->sd.entity);
> > + v4l2_ctrl_handler_free(&imx214->ctrls);
> > +
> > + pm_runtime_disable(&client->dev);
> > + pm_runtime_set_suspended(&client->dev);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct of_device_id imx214_of_match[] = {
> > + { .compatible = "sony,imx214" },
> > + { }
> > +};
> > +MODULE_DEVICE_TABLE(of, imx214_of_match);
> > +
> > +static const struct dev_pm_ops imx214_pm_ops = {
> > + SET_SYSTEM_SLEEP_PM_OPS(imx214_suspend, imx214_resume)
>
> You'll need the runtime PM ops as well, not only the system ones. Please
> see e.g. the smiapp driver --- the runtime_resume and runtime_suspend
> callbacks replace the s_power() callback that then can be removed.
>
> > +};
> > +
> > +static struct i2c_driver imx214_i2c_driver = {
> > + .driver = {
> > + .of_match_table = imx214_of_match,
> > + .pm = &imx214_pm_ops,
> > + .name = "imx214",
> > + },
> > + .probe_new = imx214_probe,
> > + .remove = imx214_remove,
> > +};
> > +
> > +module_i2c_driver(imx214_i2c_driver);
> > +
> > +MODULE_DESCRIPTION("Sony IMX214 Camera drier");
> > +MODULE_AUTHOR("Ricardo Ribalda <[email protected]>");
> > +MODULE_LICENSE("GPL v2");
>
> --
> Kind regards,
>
> Sakari Ailus
> [email protected]
--
Ricardo Ribalda
On Wed, Oct 03, 2018 at 10:24:17PM +0200, Ricardo Ribalda Delgado wrote:
...
> > > +static int imx214_enum_frame_size(struct v4l2_subdev *subdev,
> > > + struct v4l2_subdev_pad_config *cfg,
> > > + struct v4l2_subdev_frame_size_enum *fse)
> > > +{
> > > + if (fse->code != IMX214_MBUS_CODE)
> > > + return -EINVAL;
> > > +
> > > + if (fse->index >= ARRAY_SIZE(imx214_modes))
> >
> > array_index_nospec() ?? I find it scary that you'd need that in drivers.
> > :-o
Uh... not needed.
The value is just sent back to the user as such so this is fine AFAICT.
> >
> > > + return -EINVAL;
> > > +
> > > + fse->min_width = fse->max_width = imx214_modes[fse->index].width;
> > > + fse->min_height = fse->max_height = imx214_modes[fse->index].height;
> > > +
> > > + return 0;
> > > +}
...
> > > + /*
> > > + * WARNING!
> > > + * Values obtained reverse engineering blobs and/or devices.
> > > + * Ranges and functionality might be wrong.
> > > + *
> > > + * Sony, please release some register set documentation for the
> > > + * device.
> > > + *
> > > + * Yours sincerely, Ricardo.
> > > + */
> > > + imx214->exposure = v4l2_ctrl_new_std(&imx214->ctrls, &imx214_ctrl_ops,
> > > + V4L2_CID_EXPOSURE,
> > > + 0, 0xffff, 1, 0x0c70);
> >
> > The exposure is in lines so it can't exceed frame height + blanking.
> > There's a marginal, too. I don't know what it might be for this sensor
> > though. Usually it's small, such as 8 or 16. The image will almost
> > certainly be garbled if you exceed the allowed value.
> >Seems that this sensor
>
> On this sensor what I am experiencing instead of garbage is that the
> fps gets reduced. So I believe it is fine to
> set it up this way.
That's rather confusing as well. The user should explicitly need to change
fps first, rather than it happening as a side effect of a seemingly
unrelated control.
--
Regards,
Sakari Ailus
[email protected]
Hi Sakari
On Thu, Oct 4, 2018 at 12:14 AM Sakari Ailus
<[email protected]> wrote:
>
> On Wed, Oct 03, 2018 at 10:24:17PM +0200, Ricardo Ribalda Delgado wrote:
> ...
> > > > +static int imx214_enum_frame_size(struct v4l2_subdev *subdev,
> > > > + struct v4l2_subdev_pad_config *cfg,
> > > > + struct v4l2_subdev_frame_size_enum *fse)
> > > > +{
> > > > + if (fse->code != IMX214_MBUS_CODE)
> > > > + return -EINVAL;
> > > > +
> > > > + if (fse->index >= ARRAY_SIZE(imx214_modes))
> > >
> > > array_index_nospec() ?? I find it scary that you'd need that in drivers.
> > > :-o
>
> Uh... not needed.
>
> The value is just sent back to the user as such so this is fine AFAICT.
>
> > >
> > > > + return -EINVAL;
> > > > +
> > > > + fse->min_width = fse->max_width = imx214_modes[fse->index].width;
> > > > + fse->min_height = fse->max_height = imx214_modes[fse->index].height;
> > > > +
> > > > + return 0;
> > > > +}
>
> ...
>
> > > > + /*
> > > > + * WARNING!
> > > > + * Values obtained reverse engineering blobs and/or devices.
> > > > + * Ranges and functionality might be wrong.
> > > > + *
> > > > + * Sony, please release some register set documentation for the
> > > > + * device.
> > > > + *
> > > > + * Yours sincerely, Ricardo.
> > > > + */
> > > > + imx214->exposure = v4l2_ctrl_new_std(&imx214->ctrls, &imx214_ctrl_ops,
> > > > + V4L2_CID_EXPOSURE,
> > > > + 0, 0xffff, 1, 0x0c70);
> > >
> > > The exposure is in lines so it can't exceed frame height + blanking.
> > > There's a marginal, too. I don't know what it might be for this sensor
> > > though. Usually it's small, such as 8 or 16. The image will almost
> > > certainly be garbled if you exceed the allowed value.
> > >Seems that this sensor
> >
> > On this sensor what I am experiencing instead of garbage is that the
> > fps gets reduced. So I believe it is fine to
> > set it up this way.
>
> That's rather confusing as well. The user should explicitly need to change
> fps first, rather than it happening as a side effect of a seemingly
> unrelated control.
>
I'd rather maintain this behaviour until we get access to better documentation.
Currently I cannot change the fps on demand, just changing the
exposure time, so I have no proper way of set/get fps
> --
> Regards,
>
> Sakari Ailus
> [email protected]
--
Ricardo Ribalda