(Jaroslav you may want to clone this into ALSA if ALSA lacks this one)
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.2.5.40/sound/oss/maestro3.c linux.2.5.40-ac5/sound/oss/maestro3.c
--- linux.2.5.40/sound/oss/maestro3.c 2002-10-02 21:33:42.000000000 +0100
+++ linux.2.5.40-ac5/sound/oss/maestro3.c 2002-10-03 00:15:43.000000000 +0100
@@ -28,6 +28,9 @@
* Shouts go out to Mike "DJ XPCom" Ang.
*
* History
+ * v1.23 - Jun 5 2002 - Michael Olson <[email protected]>
+ * added a module option to allow selection of GPIO pin number
+ * for external amp
* v1.22 - Feb 28 2001 - Zach Brown <[email protected]>
* allocate mem at insmod/setup, rather than open
* limit pci dma addresses to 28bit, thanks guys.
@@ -153,7 +156,7 @@
#define M_DEBUG 1
-#define DRIVER_VERSION "1.22"
+#define DRIVER_VERSION "1.23"
#define M3_MODULE_NAME "maestro3"
#define PFX M3_MODULE_NAME ": "
@@ -190,6 +193,7 @@
};
int external_amp = 1;
+int gpio_pin = -1;
struct m3_state {
unsigned int magic;
@@ -2472,14 +2476,20 @@
if(!external_amp)
return;
- switch (card->card_type) {
- case ESS_ALLEGRO:
- polarity_port = 0x1800;
- break;
- default:
- /* presumably this is for all 'maestro3's.. */
- polarity_port = 0x1100;
- break;
+ if (gpio_pin >= 0 && gpio_pin <= 15) {
+ polarity_port = 0x1000 + (0x100 * gpio_pin);
+ } else {
+ switch (card->card_type) {
+ case ESS_ALLEGRO:
+ polarity_port = 0x1800;
+ break;
+ default:
+ polarity_port = 0x1100;
+ /* Panasonic toughbook CF72 has to be different... */
+ if(card->pcidev->subsystem_vendor == 0x10F7 && card->pcidev->subsystem_device == 0x833D)
+ polarity_port = 0x1D00;
+ break;
+ }
}
gpo = (polarity_port >> 8) & 0x0F;
@@ -2912,6 +2922,7 @@
MODULE_PARM(debug,"i");
#endif
MODULE_PARM(external_amp,"i");
+MODULE_PARM(gpio_pin, "i");
static struct pci_driver m3_pci_driver = {
name: "ess_m3_audio",