> -----Original Message-----
> From: Randy Dunlap [mailto:[email protected]]
> Sent: Tuesday, November 21, 2006 1:06 PM
> To: scsi
> Cc: Miller, Mike (OS Dev); ISS StorageDev; akpm
> Subject: [PATCH] CISS: require same SCSI module support
>
> From: Randy Dunlap <[email protected]>
>
> Building CCISS SCSI tape support in-kernel when SCSI=m causes
> build errors, so require SCSI support to be =y or same as
> CCISS SCSI tape support.
>
> drivers/built-in.o: In function `cciss_remove_one':
> cciss.c:(.text+0x79d4c): undefined reference to `scsi_remove_host'
> cciss.c:(.text+0x79d55): undefined reference to `scsi_host_put'
> drivers/built-in.o: In function `cciss_update_non_disk_devices':
> cciss.c:(.text+0x7bb54): undefined reference to `scsi_device_type'
> cciss.c:(.text+0x7bcc8): undefined reference to `scsi_device_type'
> cciss.c:(.text+0x7be81): undefined reference to `scsi_device_type'
> cciss.c:(.text+0x7bf81): undefined reference to `scsi_device_type'
> drivers/built-in.o: In function `cciss_proc_write':
> cciss.c:(.text+0x7c175): undefined reference to `scsi_host_alloc'
> cciss.c:(.text+0x7c1ed): undefined reference to `scsi_add_host'
> cciss.c:(.text+0x7c1f9): undefined reference to `scsi_scan_host'
> cciss.c:(.text+0x7c206): undefined reference to `scsi_host_put'
> make: *** [.tmp_vmlinux1] Error 1
>
> Signed-off-by: Randy Dunlap <[email protected]>
Acked-by: Mike Miller <[email protected]>
> ---
> drivers/block/Kconfig | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> --- linux-2619-rc6g3.orig/drivers/block/Kconfig
> +++ linux-2619-rc6g3/drivers/block/Kconfig
> @@ -168,7 +168,8 @@ config BLK_CPQ_CISS_DA
>
> config CISS_SCSI_TAPE
> bool "SCSI tape drive support for Smart Array 5xxx"
> - depends on BLK_CPQ_CISS_DA && SCSI && PROC_FS
> + depends on BLK_CPQ_CISS_DA && PROC_FS
> + depends on SCSI=y || SCSI=BLK_CPQ_CISS_DA
> help
> When enabled (Y), this option allows SCSI tape drives
> and SCSI medium
> changers (tape robots) to be accessed via a Compaq 5xxx array
>
>
> ---
>