Add a driver for the SiFive FU740 PRCI IP block, which handles more
clocks than FU540. These patches also refactor the original
implementation by spliting the dependent-code of fu540 and fu740
respectively.
Changed in v2:
- Remove the macro definition for __prci_clock_array.
- Indicate the functional changes in commit message.
- Using option -M and -C to create patches.
- Rebase code to kernel v5.10-rc3
Zong Li (3):
clk: sifive: Extract prci core to common base
clk: sifive: Use common name for prci configuration
clk: sifive: Add a driver for the SiFive FU740 PRCI IP block
arch/riscv/Kconfig.socs | 2 +-
drivers/clk/sifive/Kconfig | 8 +-
drivers/clk/sifive/Makefile | 5 +-
drivers/clk/sifive/fu540-prci.c | 586 +-----------------
drivers/clk/sifive/fu540-prci.h | 21 +
drivers/clk/sifive/fu740-prci.c | 122 ++++
drivers/clk/sifive/fu740-prci.h | 21 +
.../sifive/{fu540-prci.c => sifive-prci.c} | 499 ++++++---------
drivers/clk/sifive/sifive-prci.h | 289 +++++++++
include/dt-bindings/clock/sifive-fu740-prci.h | 23 +
10 files changed, 703 insertions(+), 873 deletions(-)
create mode 100644 drivers/clk/sifive/fu540-prci.h
create mode 100644 drivers/clk/sifive/fu740-prci.c
create mode 100644 drivers/clk/sifive/fu740-prci.h
copy drivers/clk/sifive/{fu540-prci.c => sifive-prci.c} (45%)
create mode 100644 drivers/clk/sifive/sifive-prci.h
create mode 100644 include/dt-bindings/clock/sifive-fu740-prci.h
--
2.29.2
Extract common core of prci driver to an independent file, it could
allow other chips to reuse it. Separate SoCs-dependent code 'fu540'
from prci core, then we can easily add 'fu740' later.
Almost these changes are code movement. The different is adding the
private data for each SoC use, so it needs to get match data in probe
callback function, then use the data for initialization.
Signed-off-by: Zong Li <[email protected]>
---
drivers/clk/sifive/Makefile | 2 +
drivers/clk/sifive/fu540-prci.c | 586 +-----------------
drivers/clk/sifive/fu540-prci.h | 21 +
.../sifive/{fu540-prci.c => sifive-prci.c} | 381 +++---------
drivers/clk/sifive/sifive-prci.h | 201 ++++++
5 files changed, 323 insertions(+), 868 deletions(-)
create mode 100644 drivers/clk/sifive/fu540-prci.h
copy drivers/clk/sifive/{fu540-prci.c => sifive-prci.c} (45%)
create mode 100644 drivers/clk/sifive/sifive-prci.h
diff --git a/drivers/clk/sifive/Makefile b/drivers/clk/sifive/Makefile
index 0797f14fef6b..627effe2ece1 100644
--- a/drivers/clk/sifive/Makefile
+++ b/drivers/clk/sifive/Makefile
@@ -1,2 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-only
+obj-y += sifive-prci.o
+
obj-$(CONFIG_CLK_SIFIVE_FU540_PRCI) += fu540-prci.o
diff --git a/drivers/clk/sifive/fu540-prci.c b/drivers/clk/sifive/fu540-prci.c
index a8901f90a61a..840b97bfff85 100644
--- a/drivers/clk/sifive/fu540-prci.c
+++ b/drivers/clk/sifive/fu540-prci.c
@@ -3,6 +3,7 @@
* Copyright (C) 2018-2019 SiFive, Inc.
* Wesley Terpstra
* Paul Walmsley
+ * Zong Li
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -13,475 +14,48 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * The FU540 PRCI implements clock and reset control for the SiFive
- * FU540-C000 chip. This driver assumes that it has sole control
- * over all PRCI resources.
- *
- * This driver is based on the PRCI driver written by Wesley Terpstra:
- * https://github.com/riscv/riscv-linux/commit/999529edf517ed75b56659d456d221b2ee56bb60
- *
* References:
* - SiFive FU540-C000 manual v1p0, Chapter 7 "Clocking and Reset"
*/
#include <dt-bindings/clock/sifive-fu540-prci.h>
-#include <linux/clkdev.h>
-#include <linux/clk-provider.h>
-#include <linux/clk/analogbits-wrpll-cln28hpc.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/io.h>
#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_clk.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-/*
- * EXPECTED_CLK_PARENT_COUNT: how many parent clocks this driver expects:
- * hfclk and rtcclk
- */
-#define EXPECTED_CLK_PARENT_COUNT 2
-
-/*
- * Register offsets and bitmasks
- */
-
-/* COREPLLCFG0 */
-#define PRCI_COREPLLCFG0_OFFSET 0x4
-# define PRCI_COREPLLCFG0_DIVR_SHIFT 0
-# define PRCI_COREPLLCFG0_DIVR_MASK (0x3f << PRCI_COREPLLCFG0_DIVR_SHIFT)
-# define PRCI_COREPLLCFG0_DIVF_SHIFT 6
-# define PRCI_COREPLLCFG0_DIVF_MASK (0x1ff << PRCI_COREPLLCFG0_DIVF_SHIFT)
-# define PRCI_COREPLLCFG0_DIVQ_SHIFT 15
-# define PRCI_COREPLLCFG0_DIVQ_MASK (0x7 << PRCI_COREPLLCFG0_DIVQ_SHIFT)
-# define PRCI_COREPLLCFG0_RANGE_SHIFT 18
-# define PRCI_COREPLLCFG0_RANGE_MASK (0x7 << PRCI_COREPLLCFG0_RANGE_SHIFT)
-# define PRCI_COREPLLCFG0_BYPASS_SHIFT 24
-# define PRCI_COREPLLCFG0_BYPASS_MASK (0x1 << PRCI_COREPLLCFG0_BYPASS_SHIFT)
-# define PRCI_COREPLLCFG0_FSE_SHIFT 25
-# define PRCI_COREPLLCFG0_FSE_MASK (0x1 << PRCI_COREPLLCFG0_FSE_SHIFT)
-# define PRCI_COREPLLCFG0_LOCK_SHIFT 31
-# define PRCI_COREPLLCFG0_LOCK_MASK (0x1 << PRCI_COREPLLCFG0_LOCK_SHIFT)
-
-/* DDRPLLCFG0 */
-#define PRCI_DDRPLLCFG0_OFFSET 0xc
-# define PRCI_DDRPLLCFG0_DIVR_SHIFT 0
-# define PRCI_DDRPLLCFG0_DIVR_MASK (0x3f << PRCI_DDRPLLCFG0_DIVR_SHIFT)
-# define PRCI_DDRPLLCFG0_DIVF_SHIFT 6
-# define PRCI_DDRPLLCFG0_DIVF_MASK (0x1ff << PRCI_DDRPLLCFG0_DIVF_SHIFT)
-# define PRCI_DDRPLLCFG0_DIVQ_SHIFT 15
-# define PRCI_DDRPLLCFG0_DIVQ_MASK (0x7 << PRCI_DDRPLLCFG0_DIVQ_SHIFT)
-# define PRCI_DDRPLLCFG0_RANGE_SHIFT 18
-# define PRCI_DDRPLLCFG0_RANGE_MASK (0x7 << PRCI_DDRPLLCFG0_RANGE_SHIFT)
-# define PRCI_DDRPLLCFG0_BYPASS_SHIFT 24
-# define PRCI_DDRPLLCFG0_BYPASS_MASK (0x1 << PRCI_DDRPLLCFG0_BYPASS_SHIFT)
-# define PRCI_DDRPLLCFG0_FSE_SHIFT 25
-# define PRCI_DDRPLLCFG0_FSE_MASK (0x1 << PRCI_DDRPLLCFG0_FSE_SHIFT)
-# define PRCI_DDRPLLCFG0_LOCK_SHIFT 31
-# define PRCI_DDRPLLCFG0_LOCK_MASK (0x1 << PRCI_DDRPLLCFG0_LOCK_SHIFT)
+#include "sifive-prci.h"
-/* DDRPLLCFG1 */
-#define PRCI_DDRPLLCFG1_OFFSET 0x10
-# define PRCI_DDRPLLCFG1_CKE_SHIFT 24
-# define PRCI_DDRPLLCFG1_CKE_MASK (0x1 << PRCI_DDRPLLCFG1_CKE_SHIFT)
+/* PRCI integration data for each WRPLL instance */
-/* GEMGXLPLLCFG0 */
-#define PRCI_GEMGXLPLLCFG0_OFFSET 0x1c
-# define PRCI_GEMGXLPLLCFG0_DIVR_SHIFT 0
-# define PRCI_GEMGXLPLLCFG0_DIVR_MASK (0x3f << PRCI_GEMGXLPLLCFG0_DIVR_SHIFT)
-# define PRCI_GEMGXLPLLCFG0_DIVF_SHIFT 6
-# define PRCI_GEMGXLPLLCFG0_DIVF_MASK (0x1ff << PRCI_GEMGXLPLLCFG0_DIVF_SHIFT)
-# define PRCI_GEMGXLPLLCFG0_DIVQ_SHIFT 15
-# define PRCI_GEMGXLPLLCFG0_DIVQ_MASK (0x7 << PRCI_GEMGXLPLLCFG0_DIVQ_SHIFT)
-# define PRCI_GEMGXLPLLCFG0_RANGE_SHIFT 18
-# define PRCI_GEMGXLPLLCFG0_RANGE_MASK (0x7 << PRCI_GEMGXLPLLCFG0_RANGE_SHIFT)
-# define PRCI_GEMGXLPLLCFG0_BYPASS_SHIFT 24
-# define PRCI_GEMGXLPLLCFG0_BYPASS_MASK (0x1 << PRCI_GEMGXLPLLCFG0_BYPASS_SHIFT)
-# define PRCI_GEMGXLPLLCFG0_FSE_SHIFT 25
-# define PRCI_GEMGXLPLLCFG0_FSE_MASK (0x1 << PRCI_GEMGXLPLLCFG0_FSE_SHIFT)
-# define PRCI_GEMGXLPLLCFG0_LOCK_SHIFT 31
-# define PRCI_GEMGXLPLLCFG0_LOCK_MASK (0x1 << PRCI_GEMGXLPLLCFG0_LOCK_SHIFT)
-
-/* GEMGXLPLLCFG1 */
-#define PRCI_GEMGXLPLLCFG1_OFFSET 0x20
-# define PRCI_GEMGXLPLLCFG1_CKE_SHIFT 24
-# define PRCI_GEMGXLPLLCFG1_CKE_MASK (0x1 << PRCI_GEMGXLPLLCFG1_CKE_SHIFT)
-
-/* CORECLKSEL */
-#define PRCI_CORECLKSEL_OFFSET 0x24
-# define PRCI_CORECLKSEL_CORECLKSEL_SHIFT 0
-# define PRCI_CORECLKSEL_CORECLKSEL_MASK (0x1 << PRCI_CORECLKSEL_CORECLKSEL_SHIFT)
-
-/* DEVICESRESETREG */
-#define PRCI_DEVICESRESETREG_OFFSET 0x28
-# define PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_SHIFT 0
-# define PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_MASK (0x1 << PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_SHIFT)
-# define PRCI_DEVICESRESETREG_DDR_AXI_RST_N_SHIFT 1
-# define PRCI_DEVICESRESETREG_DDR_AXI_RST_N_MASK (0x1 << PRCI_DEVICESRESETREG_DDR_AXI_RST_N_SHIFT)
-# define PRCI_DEVICESRESETREG_DDR_AHB_RST_N_SHIFT 2
-# define PRCI_DEVICESRESETREG_DDR_AHB_RST_N_MASK (0x1 << PRCI_DEVICESRESETREG_DDR_AHB_RST_N_SHIFT)
-# define PRCI_DEVICESRESETREG_DDR_PHY_RST_N_SHIFT 3
-# define PRCI_DEVICESRESETREG_DDR_PHY_RST_N_MASK (0x1 << PRCI_DEVICESRESETREG_DDR_PHY_RST_N_SHIFT)
-# define PRCI_DEVICESRESETREG_GEMGXL_RST_N_SHIFT 5
-# define PRCI_DEVICESRESETREG_GEMGXL_RST_N_MASK (0x1 << PRCI_DEVICESRESETREG_GEMGXL_RST_N_SHIFT)
-
-/* CLKMUXSTATUSREG */
-#define PRCI_CLKMUXSTATUSREG_OFFSET 0x2c
-# define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT 1
-# define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_MASK (0x1 << PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT)
-
-/*
- * Private structures
- */
-
-/**
- * struct __prci_data - per-device-instance data
- * @va: base virtual address of the PRCI IP block
- * @hw_clks: encapsulates struct clk_hw records
- *
- * PRCI per-device instance data
- */
-struct __prci_data {
- void __iomem *va;
- struct clk_hw_onecell_data hw_clks;
+static struct __prci_wrpll_data __prci_corepll_data = {
+ .cfg0_offs = PRCI_COREPLLCFG0_OFFSET,
+ .enable_bypass = sifive_prci_coreclksel_use_hfclk,
+ .disable_bypass = sifive_prci_coreclksel_use_corepll,
};
-/**
- * struct __prci_wrpll_data - WRPLL configuration and integration data
- * @c: WRPLL current configuration record
- * @enable_bypass: fn ptr to code to bypass the WRPLL (if applicable; else NULL)
- * @disable_bypass: fn ptr to code to not bypass the WRPLL (or NULL)
- * @cfg0_offs: WRPLL CFG0 register offset (in bytes) from the PRCI base address
- *
- * @enable_bypass and @disable_bypass are used for WRPLL instances
- * that contain a separate external glitchless clock mux downstream
- * from the PLL. The WRPLL internal bypass mux is not glitchless.
- */
-struct __prci_wrpll_data {
- struct wrpll_cfg c;
- void (*enable_bypass)(struct __prci_data *pd);
- void (*disable_bypass)(struct __prci_data *pd);
- u8 cfg0_offs;
+static struct __prci_wrpll_data __prci_ddrpll_data = {
+ .cfg0_offs = PRCI_DDRPLLCFG0_OFFSET,
};
-/**
- * struct __prci_clock - describes a clock device managed by PRCI
- * @name: user-readable clock name string - should match the manual
- * @parent_name: parent name for this clock
- * @ops: struct clk_ops for the Linux clock framework to use for control
- * @hw: Linux-private clock data
- * @pwd: WRPLL-specific data, associated with this clock (if not NULL)
- * @pd: PRCI-specific data associated with this clock (if not NULL)
- *
- * PRCI clock data. Used by the PRCI driver to register PRCI-provided
- * clocks to the Linux clock infrastructure.
- */
-struct __prci_clock {
- const char *name;
- const char *parent_name;
- const struct clk_ops *ops;
- struct clk_hw hw;
- struct __prci_wrpll_data *pwd;
- struct __prci_data *pd;
+static struct __prci_wrpll_data __prci_gemgxlpll_data = {
+ .cfg0_offs = PRCI_GEMGXLPLLCFG0_OFFSET,
};
-#define clk_hw_to_prci_clock(pwd) container_of(pwd, struct __prci_clock, hw)
-
-/*
- * Private functions
- */
-
-/**
- * __prci_readl() - read from a PRCI register
- * @pd: PRCI context
- * @offs: register offset to read from (in bytes, from PRCI base address)
- *
- * Read the register located at offset @offs from the base virtual
- * address of the PRCI register target described by @pd, and return
- * the value to the caller.
- *
- * Context: Any context.
- *
- * Return: the contents of the register described by @pd and @offs.
- */
-static u32 __prci_readl(struct __prci_data *pd, u32 offs)
-{
- return readl_relaxed(pd->va + offs);
-}
-
-static void __prci_writel(u32 v, u32 offs, struct __prci_data *pd)
-{
- writel_relaxed(v, pd->va + offs);
-}
-
-/* WRPLL-related private functions */
-
-/**
- * __prci_wrpll_unpack() - unpack WRPLL configuration registers into parameters
- * @c: ptr to a struct wrpll_cfg record to write config into
- * @r: value read from the PRCI PLL configuration register
- *
- * Given a value @r read from an FU540 PRCI PLL configuration register,
- * split it into fields and populate it into the WRPLL configuration record
- * pointed to by @c.
- *
- * The COREPLLCFG0 macros are used below, but the other *PLLCFG0 macros
- * have the same register layout.
- *
- * Context: Any context.
- */
-static void __prci_wrpll_unpack(struct wrpll_cfg *c, u32 r)
-{
- u32 v;
-
- v = r & PRCI_COREPLLCFG0_DIVR_MASK;
- v >>= PRCI_COREPLLCFG0_DIVR_SHIFT;
- c->divr = v;
-
- v = r & PRCI_COREPLLCFG0_DIVF_MASK;
- v >>= PRCI_COREPLLCFG0_DIVF_SHIFT;
- c->divf = v;
-
- v = r & PRCI_COREPLLCFG0_DIVQ_MASK;
- v >>= PRCI_COREPLLCFG0_DIVQ_SHIFT;
- c->divq = v;
-
- v = r & PRCI_COREPLLCFG0_RANGE_MASK;
- v >>= PRCI_COREPLLCFG0_RANGE_SHIFT;
- c->range = v;
-
- c->flags &= (WRPLL_FLAGS_INT_FEEDBACK_MASK |
- WRPLL_FLAGS_EXT_FEEDBACK_MASK);
-
- /* external feedback mode not supported */
- c->flags |= WRPLL_FLAGS_INT_FEEDBACK_MASK;
-}
-
-/**
- * __prci_wrpll_pack() - pack PLL configuration parameters into a register value
- * @c: pointer to a struct wrpll_cfg record containing the PLL's cfg
- *
- * Using a set of WRPLL configuration values pointed to by @c,
- * assemble a PRCI PLL configuration register value, and return it to
- * the caller.
- *
- * Context: Any context. Caller must ensure that the contents of the
- * record pointed to by @c do not change during the execution
- * of this function.
- *
- * Returns: a value suitable for writing into a PRCI PLL configuration
- * register
- */
-static u32 __prci_wrpll_pack(const struct wrpll_cfg *c)
-{
- u32 r = 0;
-
- r |= c->divr << PRCI_COREPLLCFG0_DIVR_SHIFT;
- r |= c->divf << PRCI_COREPLLCFG0_DIVF_SHIFT;
- r |= c->divq << PRCI_COREPLLCFG0_DIVQ_SHIFT;
- r |= c->range << PRCI_COREPLLCFG0_RANGE_SHIFT;
-
- /* external feedback mode not supported */
- r |= PRCI_COREPLLCFG0_FSE_MASK;
-
- return r;
-}
-
-/**
- * __prci_wrpll_read_cfg() - read the WRPLL configuration from the PRCI
- * @pd: PRCI context
- * @pwd: PRCI WRPLL metadata
- *
- * Read the current configuration of the PLL identified by @pwd from
- * the PRCI identified by @pd, and store it into the local configuration
- * cache in @pwd.
- *
- * Context: Any context. Caller must prevent the records pointed to by
- * @pd and @pwd from changing during execution.
- */
-static void __prci_wrpll_read_cfg(struct __prci_data *pd,
- struct __prci_wrpll_data *pwd)
-{
- __prci_wrpll_unpack(&pwd->c, __prci_readl(pd, pwd->cfg0_offs));
-}
-
-/**
- * __prci_wrpll_write_cfg() - write WRPLL configuration into the PRCI
- * @pd: PRCI context
- * @pwd: PRCI WRPLL metadata
- * @c: WRPLL configuration record to write
- *
- * Write the WRPLL configuration described by @c into the WRPLL
- * configuration register identified by @pwd in the PRCI instance
- * described by @c. Make a cached copy of the WRPLL's current
- * configuration so it can be used by other code.
- *
- * Context: Any context. Caller must prevent the records pointed to by
- * @pd and @pwd from changing during execution.
- */
-static void __prci_wrpll_write_cfg(struct __prci_data *pd,
- struct __prci_wrpll_data *pwd,
- struct wrpll_cfg *c)
-{
- __prci_writel(__prci_wrpll_pack(c), pwd->cfg0_offs, pd);
-
- memcpy(&pwd->c, c, sizeof(*c));
-}
-
-/* Core clock mux control */
-
-/**
- * __prci_coreclksel_use_hfclk() - switch the CORECLK mux to output HFCLK
- * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg
- *
- * Switch the CORECLK mux to the HFCLK input source; return once complete.
- *
- * Context: Any context. Caller must prevent concurrent changes to the
- * PRCI_CORECLKSEL_OFFSET register.
- */
-static void __prci_coreclksel_use_hfclk(struct __prci_data *pd)
-{
- u32 r;
-
- r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET);
- r |= PRCI_CORECLKSEL_CORECLKSEL_MASK;
- __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd);
-
- r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */
-}
-
-/**
- * __prci_coreclksel_use_corepll() - switch the CORECLK mux to output COREPLL
- * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg
- *
- * Switch the CORECLK mux to the PLL output clock; return once complete.
- *
- * Context: Any context. Caller must prevent concurrent changes to the
- * PRCI_CORECLKSEL_OFFSET register.
- */
-static void __prci_coreclksel_use_corepll(struct __prci_data *pd)
-{
- u32 r;
-
- r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET);
- r &= ~PRCI_CORECLKSEL_CORECLKSEL_MASK;
- __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd);
-
- r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */
-}
-
-/*
- * Linux clock framework integration
- *
- * See the Linux clock framework documentation for more information on
- * these functions.
- */
-
-static unsigned long sifive_fu540_prci_wrpll_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
- struct __prci_wrpll_data *pwd = pc->pwd;
-
- return wrpll_calc_output_rate(&pwd->c, parent_rate);
-}
-
-static long sifive_fu540_prci_wrpll_round_rate(struct clk_hw *hw,
- unsigned long rate,
- unsigned long *parent_rate)
-{
- struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
- struct __prci_wrpll_data *pwd = pc->pwd;
- struct wrpll_cfg c;
-
- memcpy(&c, &pwd->c, sizeof(c));
-
- wrpll_configure_for_rate(&c, rate, *parent_rate);
-
- return wrpll_calc_output_rate(&c, *parent_rate);
-}
-
-static int sifive_fu540_prci_wrpll_set_rate(struct clk_hw *hw,
- unsigned long rate,
- unsigned long parent_rate)
-{
- struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
- struct __prci_wrpll_data *pwd = pc->pwd;
- struct __prci_data *pd = pc->pd;
- int r;
-
- r = wrpll_configure_for_rate(&pwd->c, rate, parent_rate);
- if (r)
- return r;
-
- if (pwd->enable_bypass)
- pwd->enable_bypass(pd);
-
- __prci_wrpll_write_cfg(pd, pwd, &pwd->c);
-
- udelay(wrpll_calc_max_lock_us(&pwd->c));
-
- if (pwd->disable_bypass)
- pwd->disable_bypass(pd);
-
- return 0;
-}
+/* Linux clock framework integration */
static const struct clk_ops sifive_fu540_prci_wrpll_clk_ops = {
- .set_rate = sifive_fu540_prci_wrpll_set_rate,
- .round_rate = sifive_fu540_prci_wrpll_round_rate,
- .recalc_rate = sifive_fu540_prci_wrpll_recalc_rate,
+ .set_rate = sifive_prci_wrpll_set_rate,
+ .round_rate = sifive_prci_wrpll_round_rate,
+ .recalc_rate = sifive_prci_wrpll_recalc_rate,
};
static const struct clk_ops sifive_fu540_prci_wrpll_ro_clk_ops = {
- .recalc_rate = sifive_fu540_prci_wrpll_recalc_rate,
+ .recalc_rate = sifive_prci_wrpll_recalc_rate,
};
-/* TLCLKSEL clock integration */
-
-static unsigned long sifive_fu540_prci_tlclksel_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
- struct __prci_data *pd = pc->pd;
- u32 v;
- u8 div;
-
- v = __prci_readl(pd, PRCI_CLKMUXSTATUSREG_OFFSET);
- v &= PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_MASK;
- div = v ? 1 : 2;
-
- return div_u64(parent_rate, div);
-}
-
static const struct clk_ops sifive_fu540_prci_tlclksel_clk_ops = {
- .recalc_rate = sifive_fu540_prci_tlclksel_recalc_rate,
-};
-
-/*
- * PRCI integration data for each WRPLL instance
- */
-
-static struct __prci_wrpll_data __prci_corepll_data = {
- .cfg0_offs = PRCI_COREPLLCFG0_OFFSET,
- .enable_bypass = __prci_coreclksel_use_hfclk,
- .disable_bypass = __prci_coreclksel_use_corepll,
-};
-
-static struct __prci_wrpll_data __prci_ddrpll_data = {
- .cfg0_offs = PRCI_DDRPLLCFG0_OFFSET,
+ .recalc_rate = sifive_prci_tlclksel_recalc_rate,
};
-static struct __prci_wrpll_data __prci_gemgxlpll_data = {
- .cfg0_offs = PRCI_GEMGXLPLLCFG0_OFFSET,
-};
-
-/*
- * List of clock controls provided by the PRCI
- */
-
-static struct __prci_clock __prci_init_clocks[] = {
+/* List of clock controls provided by the PRCI */
+struct __prci_clock __prci_init_clocks_fu540[] = {
[PRCI_CLK_COREPLL] = {
.name = "corepll",
.parent_name = "hfclk",
@@ -506,125 +80,3 @@ static struct __prci_clock __prci_init_clocks[] = {
.ops = &sifive_fu540_prci_tlclksel_clk_ops,
},
};
-
-/**
- * __prci_register_clocks() - register clock controls in the PRCI with Linux
- * @dev: Linux struct device *
- *
- * Register the list of clock controls described in __prci_init_plls[] with
- * the Linux clock framework.
- *
- * Return: 0 upon success or a negative error code upon failure.
- */
-static int __prci_register_clocks(struct device *dev, struct __prci_data *pd)
-{
- struct clk_init_data init = { };
- struct __prci_clock *pic;
- int parent_count, i, r;
-
- parent_count = of_clk_get_parent_count(dev->of_node);
- if (parent_count != EXPECTED_CLK_PARENT_COUNT) {
- dev_err(dev, "expected only two parent clocks, found %d\n",
- parent_count);
- return -EINVAL;
- }
-
- /* Register PLLs */
- for (i = 0; i < ARRAY_SIZE(__prci_init_clocks); ++i) {
- pic = &__prci_init_clocks[i];
-
- init.name = pic->name;
- init.parent_names = &pic->parent_name;
- init.num_parents = 1;
- init.ops = pic->ops;
- pic->hw.init = &init;
-
- pic->pd = pd;
-
- if (pic->pwd)
- __prci_wrpll_read_cfg(pd, pic->pwd);
-
- r = devm_clk_hw_register(dev, &pic->hw);
- if (r) {
- dev_warn(dev, "Failed to register clock %s: %d\n",
- init.name, r);
- return r;
- }
-
- r = clk_hw_register_clkdev(&pic->hw, pic->name, dev_name(dev));
- if (r) {
- dev_warn(dev, "Failed to register clkdev for %s: %d\n",
- init.name, r);
- return r;
- }
-
- pd->hw_clks.hws[i] = &pic->hw;
- }
-
- pd->hw_clks.num = i;
-
- r = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
- &pd->hw_clks);
- if (r) {
- dev_err(dev, "could not add hw_provider: %d\n", r);
- return r;
- }
-
- return 0;
-}
-
-/*
- * Linux device model integration
- *
- * See the Linux device model documentation for more information about
- * these functions.
- */
-static int sifive_fu540_prci_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct resource *res;
- struct __prci_data *pd;
- int r;
-
- pd = devm_kzalloc(dev,
- struct_size(pd, hw_clks.hws,
- ARRAY_SIZE(__prci_init_clocks)),
- GFP_KERNEL);
- if (!pd)
- return -ENOMEM;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- pd->va = devm_ioremap_resource(dev, res);
- if (IS_ERR(pd->va))
- return PTR_ERR(pd->va);
-
- r = __prci_register_clocks(dev, pd);
- if (r) {
- dev_err(dev, "could not register clocks: %d\n", r);
- return r;
- }
-
- dev_dbg(dev, "SiFive FU540 PRCI probed\n");
-
- return 0;
-}
-
-static const struct of_device_id sifive_fu540_prci_of_match[] = {
- { .compatible = "sifive,fu540-c000-prci", },
- {}
-};
-MODULE_DEVICE_TABLE(of, sifive_fu540_prci_of_match);
-
-static struct platform_driver sifive_fu540_prci_driver = {
- .driver = {
- .name = "sifive-fu540-prci",
- .of_match_table = sifive_fu540_prci_of_match,
- },
- .probe = sifive_fu540_prci_probe,
-};
-
-static int __init sifive_fu540_prci_init(void)
-{
- return platform_driver_register(&sifive_fu540_prci_driver);
-}
-core_initcall(sifive_fu540_prci_init);
diff --git a/drivers/clk/sifive/fu540-prci.h b/drivers/clk/sifive/fu540-prci.h
new file mode 100644
index 000000000000..c8271efa7bdc
--- /dev/null
+++ b/drivers/clk/sifive/fu540-prci.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 SiFive, Inc.
+ * Zong Li
+ */
+
+#ifndef __SIFIVE_CLK_FU540_PRCI_H
+#define __SIFIVE_CLK_FU540_PRCI_H
+
+#include "sifive-prci.h"
+
+#define NUM_CLOCK_FU540 4
+
+extern struct __prci_clock __prci_init_clocks_fu540[NUM_CLOCK_FU540];
+
+static const struct prci_clk_desc prci_clk_fu540 = {
+ .clks = __prci_init_clocks_fu540,
+ .num_clks = ARRAY_SIZE(__prci_init_clocks_fu540),
+};
+
+#endif /* __SIFIVE_CLK_FU540_PRCI_H */
diff --git a/drivers/clk/sifive/fu540-prci.c b/drivers/clk/sifive/sifive-prci.c
similarity index 45%
copy from drivers/clk/sifive/fu540-prci.c
copy to drivers/clk/sifive/sifive-prci.c
index a8901f90a61a..0ac729eeb71b 100644
--- a/drivers/clk/sifive/fu540-prci.c
+++ b/drivers/clk/sifive/sifive-prci.c
@@ -3,6 +3,7 @@
* Copyright (C) 2018-2019 SiFive, Inc.
* Wesley Terpstra
* Paul Walmsley
+ * Zong Li
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -13,180 +14,19 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * The FU540 PRCI implements clock and reset control for the SiFive
- * FU540-C000 chip. This driver assumes that it has sole control
- * over all PRCI resources.
+ * The PRCI implements clock and reset control for the SiFive chip.
+ * This driver assumes that it has sole control over all PRCI resources.
*
* This driver is based on the PRCI driver written by Wesley Terpstra:
* https://github.com/riscv/riscv-linux/commit/999529edf517ed75b56659d456d221b2ee56bb60
- *
- * References:
- * - SiFive FU540-C000 manual v1p0, Chapter 7 "Clocking and Reset"
*/
-#include <dt-bindings/clock/sifive-fu540-prci.h>
#include <linux/clkdev.h>
-#include <linux/clk-provider.h>
-#include <linux/clk/analogbits-wrpll-cln28hpc.h>
#include <linux/delay.h>
-#include <linux/err.h>
#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_clk.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-/*
- * EXPECTED_CLK_PARENT_COUNT: how many parent clocks this driver expects:
- * hfclk and rtcclk
- */
-#define EXPECTED_CLK_PARENT_COUNT 2
-
-/*
- * Register offsets and bitmasks
- */
-
-/* COREPLLCFG0 */
-#define PRCI_COREPLLCFG0_OFFSET 0x4
-# define PRCI_COREPLLCFG0_DIVR_SHIFT 0
-# define PRCI_COREPLLCFG0_DIVR_MASK (0x3f << PRCI_COREPLLCFG0_DIVR_SHIFT)
-# define PRCI_COREPLLCFG0_DIVF_SHIFT 6
-# define PRCI_COREPLLCFG0_DIVF_MASK (0x1ff << PRCI_COREPLLCFG0_DIVF_SHIFT)
-# define PRCI_COREPLLCFG0_DIVQ_SHIFT 15
-# define PRCI_COREPLLCFG0_DIVQ_MASK (0x7 << PRCI_COREPLLCFG0_DIVQ_SHIFT)
-# define PRCI_COREPLLCFG0_RANGE_SHIFT 18
-# define PRCI_COREPLLCFG0_RANGE_MASK (0x7 << PRCI_COREPLLCFG0_RANGE_SHIFT)
-# define PRCI_COREPLLCFG0_BYPASS_SHIFT 24
-# define PRCI_COREPLLCFG0_BYPASS_MASK (0x1 << PRCI_COREPLLCFG0_BYPASS_SHIFT)
-# define PRCI_COREPLLCFG0_FSE_SHIFT 25
-# define PRCI_COREPLLCFG0_FSE_MASK (0x1 << PRCI_COREPLLCFG0_FSE_SHIFT)
-# define PRCI_COREPLLCFG0_LOCK_SHIFT 31
-# define PRCI_COREPLLCFG0_LOCK_MASK (0x1 << PRCI_COREPLLCFG0_LOCK_SHIFT)
-
-/* DDRPLLCFG0 */
-#define PRCI_DDRPLLCFG0_OFFSET 0xc
-# define PRCI_DDRPLLCFG0_DIVR_SHIFT 0
-# define PRCI_DDRPLLCFG0_DIVR_MASK (0x3f << PRCI_DDRPLLCFG0_DIVR_SHIFT)
-# define PRCI_DDRPLLCFG0_DIVF_SHIFT 6
-# define PRCI_DDRPLLCFG0_DIVF_MASK (0x1ff << PRCI_DDRPLLCFG0_DIVF_SHIFT)
-# define PRCI_DDRPLLCFG0_DIVQ_SHIFT 15
-# define PRCI_DDRPLLCFG0_DIVQ_MASK (0x7 << PRCI_DDRPLLCFG0_DIVQ_SHIFT)
-# define PRCI_DDRPLLCFG0_RANGE_SHIFT 18
-# define PRCI_DDRPLLCFG0_RANGE_MASK (0x7 << PRCI_DDRPLLCFG0_RANGE_SHIFT)
-# define PRCI_DDRPLLCFG0_BYPASS_SHIFT 24
-# define PRCI_DDRPLLCFG0_BYPASS_MASK (0x1 << PRCI_DDRPLLCFG0_BYPASS_SHIFT)
-# define PRCI_DDRPLLCFG0_FSE_SHIFT 25
-# define PRCI_DDRPLLCFG0_FSE_MASK (0x1 << PRCI_DDRPLLCFG0_FSE_SHIFT)
-# define PRCI_DDRPLLCFG0_LOCK_SHIFT 31
-# define PRCI_DDRPLLCFG0_LOCK_MASK (0x1 << PRCI_DDRPLLCFG0_LOCK_SHIFT)
-
-/* DDRPLLCFG1 */
-#define PRCI_DDRPLLCFG1_OFFSET 0x10
-# define PRCI_DDRPLLCFG1_CKE_SHIFT 24
-# define PRCI_DDRPLLCFG1_CKE_MASK (0x1 << PRCI_DDRPLLCFG1_CKE_SHIFT)
-
-/* GEMGXLPLLCFG0 */
-#define PRCI_GEMGXLPLLCFG0_OFFSET 0x1c
-# define PRCI_GEMGXLPLLCFG0_DIVR_SHIFT 0
-# define PRCI_GEMGXLPLLCFG0_DIVR_MASK (0x3f << PRCI_GEMGXLPLLCFG0_DIVR_SHIFT)
-# define PRCI_GEMGXLPLLCFG0_DIVF_SHIFT 6
-# define PRCI_GEMGXLPLLCFG0_DIVF_MASK (0x1ff << PRCI_GEMGXLPLLCFG0_DIVF_SHIFT)
-# define PRCI_GEMGXLPLLCFG0_DIVQ_SHIFT 15
-# define PRCI_GEMGXLPLLCFG0_DIVQ_MASK (0x7 << PRCI_GEMGXLPLLCFG0_DIVQ_SHIFT)
-# define PRCI_GEMGXLPLLCFG0_RANGE_SHIFT 18
-# define PRCI_GEMGXLPLLCFG0_RANGE_MASK (0x7 << PRCI_GEMGXLPLLCFG0_RANGE_SHIFT)
-# define PRCI_GEMGXLPLLCFG0_BYPASS_SHIFT 24
-# define PRCI_GEMGXLPLLCFG0_BYPASS_MASK (0x1 << PRCI_GEMGXLPLLCFG0_BYPASS_SHIFT)
-# define PRCI_GEMGXLPLLCFG0_FSE_SHIFT 25
-# define PRCI_GEMGXLPLLCFG0_FSE_MASK (0x1 << PRCI_GEMGXLPLLCFG0_FSE_SHIFT)
-# define PRCI_GEMGXLPLLCFG0_LOCK_SHIFT 31
-# define PRCI_GEMGXLPLLCFG0_LOCK_MASK (0x1 << PRCI_GEMGXLPLLCFG0_LOCK_SHIFT)
-
-/* GEMGXLPLLCFG1 */
-#define PRCI_GEMGXLPLLCFG1_OFFSET 0x20
-# define PRCI_GEMGXLPLLCFG1_CKE_SHIFT 24
-# define PRCI_GEMGXLPLLCFG1_CKE_MASK (0x1 << PRCI_GEMGXLPLLCFG1_CKE_SHIFT)
-
-/* CORECLKSEL */
-#define PRCI_CORECLKSEL_OFFSET 0x24
-# define PRCI_CORECLKSEL_CORECLKSEL_SHIFT 0
-# define PRCI_CORECLKSEL_CORECLKSEL_MASK (0x1 << PRCI_CORECLKSEL_CORECLKSEL_SHIFT)
-
-/* DEVICESRESETREG */
-#define PRCI_DEVICESRESETREG_OFFSET 0x28
-# define PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_SHIFT 0
-# define PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_MASK (0x1 << PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_SHIFT)
-# define PRCI_DEVICESRESETREG_DDR_AXI_RST_N_SHIFT 1
-# define PRCI_DEVICESRESETREG_DDR_AXI_RST_N_MASK (0x1 << PRCI_DEVICESRESETREG_DDR_AXI_RST_N_SHIFT)
-# define PRCI_DEVICESRESETREG_DDR_AHB_RST_N_SHIFT 2
-# define PRCI_DEVICESRESETREG_DDR_AHB_RST_N_MASK (0x1 << PRCI_DEVICESRESETREG_DDR_AHB_RST_N_SHIFT)
-# define PRCI_DEVICESRESETREG_DDR_PHY_RST_N_SHIFT 3
-# define PRCI_DEVICESRESETREG_DDR_PHY_RST_N_MASK (0x1 << PRCI_DEVICESRESETREG_DDR_PHY_RST_N_SHIFT)
-# define PRCI_DEVICESRESETREG_GEMGXL_RST_N_SHIFT 5
-# define PRCI_DEVICESRESETREG_GEMGXL_RST_N_MASK (0x1 << PRCI_DEVICESRESETREG_GEMGXL_RST_N_SHIFT)
-
-/* CLKMUXSTATUSREG */
-#define PRCI_CLKMUXSTATUSREG_OFFSET 0x2c
-# define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT 1
-# define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_MASK (0x1 << PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT)
-
-/*
- * Private structures
- */
-
-/**
- * struct __prci_data - per-device-instance data
- * @va: base virtual address of the PRCI IP block
- * @hw_clks: encapsulates struct clk_hw records
- *
- * PRCI per-device instance data
- */
-struct __prci_data {
- void __iomem *va;
- struct clk_hw_onecell_data hw_clks;
-};
-
-/**
- * struct __prci_wrpll_data - WRPLL configuration and integration data
- * @c: WRPLL current configuration record
- * @enable_bypass: fn ptr to code to bypass the WRPLL (if applicable; else NULL)
- * @disable_bypass: fn ptr to code to not bypass the WRPLL (or NULL)
- * @cfg0_offs: WRPLL CFG0 register offset (in bytes) from the PRCI base address
- *
- * @enable_bypass and @disable_bypass are used for WRPLL instances
- * that contain a separate external glitchless clock mux downstream
- * from the PLL. The WRPLL internal bypass mux is not glitchless.
- */
-struct __prci_wrpll_data {
- struct wrpll_cfg c;
- void (*enable_bypass)(struct __prci_data *pd);
- void (*disable_bypass)(struct __prci_data *pd);
- u8 cfg0_offs;
-};
-
-/**
- * struct __prci_clock - describes a clock device managed by PRCI
- * @name: user-readable clock name string - should match the manual
- * @parent_name: parent name for this clock
- * @ops: struct clk_ops for the Linux clock framework to use for control
- * @hw: Linux-private clock data
- * @pwd: WRPLL-specific data, associated with this clock (if not NULL)
- * @pd: PRCI-specific data associated with this clock (if not NULL)
- *
- * PRCI clock data. Used by the PRCI driver to register PRCI-provided
- * clocks to the Linux clock infrastructure.
- */
-struct __prci_clock {
- const char *name;
- const char *parent_name;
- const struct clk_ops *ops;
- struct clk_hw hw;
- struct __prci_wrpll_data *pwd;
- struct __prci_data *pd;
-};
-
-#define clk_hw_to_prci_clock(pwd) container_of(pwd, struct __prci_clock, hw)
+#include <linux/of_device.h>
+#include "sifive-prci.h"
+#include "fu540-prci.h"
/*
* Private functions
@@ -222,7 +62,7 @@ static void __prci_writel(u32 v, u32 offs, struct __prci_data *pd)
* @c: ptr to a struct wrpll_cfg record to write config into
* @r: value read from the PRCI PLL configuration register
*
- * Given a value @r read from an FU540 PRCI PLL configuration register,
+ * Given a value @r read from an FU740 PRCI PLL configuration register,
* split it into fields and populate it into the WRPLL configuration record
* pointed to by @c.
*
@@ -251,8 +91,8 @@ static void __prci_wrpll_unpack(struct wrpll_cfg *c, u32 r)
v >>= PRCI_COREPLLCFG0_RANGE_SHIFT;
c->range = v;
- c->flags &= (WRPLL_FLAGS_INT_FEEDBACK_MASK |
- WRPLL_FLAGS_EXT_FEEDBACK_MASK);
+ c->flags &=
+ (WRPLL_FLAGS_INT_FEEDBACK_MASK | WRPLL_FLAGS_EXT_FEEDBACK_MASK);
/* external feedback mode not supported */
c->flags |= WRPLL_FLAGS_INT_FEEDBACK_MASK;
@@ -329,48 +169,6 @@ static void __prci_wrpll_write_cfg(struct __prci_data *pd,
memcpy(&pwd->c, c, sizeof(*c));
}
-/* Core clock mux control */
-
-/**
- * __prci_coreclksel_use_hfclk() - switch the CORECLK mux to output HFCLK
- * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg
- *
- * Switch the CORECLK mux to the HFCLK input source; return once complete.
- *
- * Context: Any context. Caller must prevent concurrent changes to the
- * PRCI_CORECLKSEL_OFFSET register.
- */
-static void __prci_coreclksel_use_hfclk(struct __prci_data *pd)
-{
- u32 r;
-
- r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET);
- r |= PRCI_CORECLKSEL_CORECLKSEL_MASK;
- __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd);
-
- r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */
-}
-
-/**
- * __prci_coreclksel_use_corepll() - switch the CORECLK mux to output COREPLL
- * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg
- *
- * Switch the CORECLK mux to the PLL output clock; return once complete.
- *
- * Context: Any context. Caller must prevent concurrent changes to the
- * PRCI_CORECLKSEL_OFFSET register.
- */
-static void __prci_coreclksel_use_corepll(struct __prci_data *pd)
-{
- u32 r;
-
- r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET);
- r &= ~PRCI_CORECLKSEL_CORECLKSEL_MASK;
- __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd);
-
- r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */
-}
-
/*
* Linux clock framework integration
*
@@ -378,8 +176,8 @@ static void __prci_coreclksel_use_corepll(struct __prci_data *pd)
* these functions.
*/
-static unsigned long sifive_fu540_prci_wrpll_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
+unsigned long sifive_prci_wrpll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
{
struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
struct __prci_wrpll_data *pwd = pc->pwd;
@@ -387,9 +185,9 @@ static unsigned long sifive_fu540_prci_wrpll_recalc_rate(struct clk_hw *hw,
return wrpll_calc_output_rate(&pwd->c, parent_rate);
}
-static long sifive_fu540_prci_wrpll_round_rate(struct clk_hw *hw,
- unsigned long rate,
- unsigned long *parent_rate)
+long sifive_prci_wrpll_round_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long *parent_rate)
{
struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
struct __prci_wrpll_data *pwd = pc->pwd;
@@ -402,9 +200,8 @@ static long sifive_fu540_prci_wrpll_round_rate(struct clk_hw *hw,
return wrpll_calc_output_rate(&c, *parent_rate);
}
-static int sifive_fu540_prci_wrpll_set_rate(struct clk_hw *hw,
- unsigned long rate,
- unsigned long parent_rate)
+int sifive_prci_wrpll_set_rate(struct clk_hw *hw,
+ unsigned long rate, unsigned long parent_rate)
{
struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
struct __prci_wrpll_data *pwd = pc->pwd;
@@ -428,20 +225,10 @@ static int sifive_fu540_prci_wrpll_set_rate(struct clk_hw *hw,
return 0;
}
-static const struct clk_ops sifive_fu540_prci_wrpll_clk_ops = {
- .set_rate = sifive_fu540_prci_wrpll_set_rate,
- .round_rate = sifive_fu540_prci_wrpll_round_rate,
- .recalc_rate = sifive_fu540_prci_wrpll_recalc_rate,
-};
-
-static const struct clk_ops sifive_fu540_prci_wrpll_ro_clk_ops = {
- .recalc_rate = sifive_fu540_prci_wrpll_recalc_rate,
-};
-
/* TLCLKSEL clock integration */
-static unsigned long sifive_fu540_prci_tlclksel_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
+unsigned long sifive_prci_tlclksel_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
{
struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
struct __prci_data *pd = pc->pd;
@@ -455,68 +242,62 @@ static unsigned long sifive_fu540_prci_tlclksel_recalc_rate(struct clk_hw *hw,
return div_u64(parent_rate, div);
}
-static const struct clk_ops sifive_fu540_prci_tlclksel_clk_ops = {
- .recalc_rate = sifive_fu540_prci_tlclksel_recalc_rate,
-};
-
/*
- * PRCI integration data for each WRPLL instance
+ * Core clock mux control
*/
-static struct __prci_wrpll_data __prci_corepll_data = {
- .cfg0_offs = PRCI_COREPLLCFG0_OFFSET,
- .enable_bypass = __prci_coreclksel_use_hfclk,
- .disable_bypass = __prci_coreclksel_use_corepll,
-};
+/**
+ * sifive_prci_coreclksel_use_hfclk() - switch the CORECLK mux to output HFCLK
+ * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg
+ *
+ * Switch the CORECLK mux to the HFCLK input source; return once complete.
+ *
+ * Context: Any context. Caller must prevent concurrent changes to the
+ * PRCI_CORECLKSEL_OFFSET register.
+ */
+void sifive_prci_coreclksel_use_hfclk(struct __prci_data *pd)
+{
+ u32 r;
-static struct __prci_wrpll_data __prci_ddrpll_data = {
- .cfg0_offs = PRCI_DDRPLLCFG0_OFFSET,
-};
+ r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET);
+ r |= PRCI_CORECLKSEL_CORECLKSEL_MASK;
+ __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd);
-static struct __prci_wrpll_data __prci_gemgxlpll_data = {
- .cfg0_offs = PRCI_GEMGXLPLLCFG0_OFFSET,
-};
+ r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */
+}
-/*
- * List of clock controls provided by the PRCI
+/**
+ * sifive_prci_coreclksel_use_corepll() - switch the CORECLK mux to output
+ * COREPLL
+ * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg
+ *
+ * Switch the CORECLK mux to the COREPLL output clock; return once complete.
+ *
+ * Context: Any context. Caller must prevent concurrent changes to the
+ * PRCI_CORECLKSEL_OFFSET register.
*/
+void sifive_prci_coreclksel_use_corepll(struct __prci_data *pd)
+{
+ u32 r;
-static struct __prci_clock __prci_init_clocks[] = {
- [PRCI_CLK_COREPLL] = {
- .name = "corepll",
- .parent_name = "hfclk",
- .ops = &sifive_fu540_prci_wrpll_clk_ops,
- .pwd = &__prci_corepll_data,
- },
- [PRCI_CLK_DDRPLL] = {
- .name = "ddrpll",
- .parent_name = "hfclk",
- .ops = &sifive_fu540_prci_wrpll_ro_clk_ops,
- .pwd = &__prci_ddrpll_data,
- },
- [PRCI_CLK_GEMGXLPLL] = {
- .name = "gemgxlpll",
- .parent_name = "hfclk",
- .ops = &sifive_fu540_prci_wrpll_clk_ops,
- .pwd = &__prci_gemgxlpll_data,
- },
- [PRCI_CLK_TLCLK] = {
- .name = "tlclk",
- .parent_name = "corepll",
- .ops = &sifive_fu540_prci_tlclksel_clk_ops,
- },
-};
+ r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET);
+ r &= ~PRCI_CORECLKSEL_CORECLKSEL_MASK;
+ __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd);
+
+ r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */
+}
/**
- * __prci_register_clocks() - register clock controls in the PRCI with Linux
+ * __prci_register_clocks() - register clock controls in the PRCI
* @dev: Linux struct device *
*
- * Register the list of clock controls described in __prci_init_plls[] with
+ * Register the list of clock controls described in __prci_init_clocks[] with
* the Linux clock framework.
*
* Return: 0 upon success or a negative error code upon failure.
*/
-static int __prci_register_clocks(struct device *dev, struct __prci_data *pd)
+static int __prci_register_clocks(struct device *dev, struct __prci_data *pd,
+ const struct prci_clk_desc *desc)
{
struct clk_init_data init = { };
struct __prci_clock *pic;
@@ -530,8 +311,8 @@ static int __prci_register_clocks(struct device *dev, struct __prci_data *pd)
}
/* Register PLLs */
- for (i = 0; i < ARRAY_SIZE(__prci_init_clocks); ++i) {
- pic = &__prci_init_clocks[i];
+ for (i = 0; i < desc->num_clks; ++i) {
+ pic = &(desc->clks[i]);
init.name = pic->name;
init.parent_names = &pic->parent_name;
@@ -573,23 +354,22 @@ static int __prci_register_clocks(struct device *dev, struct __prci_data *pd)
return 0;
}
-/*
- * Linux device model integration
+/**
+ * sifive_prci_init() - initialize prci data and check parent count
*
- * See the Linux device model documentation for more information about
- * these functions.
+ * Return: 0 upon success or a negative error code upon failure.
*/
-static int sifive_fu540_prci_probe(struct platform_device *pdev)
+static int sifive_prci_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct resource *res;
struct __prci_data *pd;
+ const struct prci_clk_desc *desc;
int r;
- pd = devm_kzalloc(dev,
- struct_size(pd, hw_clks.hws,
- ARRAY_SIZE(__prci_init_clocks)),
- GFP_KERNEL);
+ desc = of_device_get_match_data(&pdev->dev);
+
+ pd = devm_kzalloc(dev, struct_size(pd, hw_clks.hws, desc->num_clks), GFP_KERNEL);
if (!pd)
return -ENOMEM;
@@ -598,33 +378,32 @@ static int sifive_fu540_prci_probe(struct platform_device *pdev)
if (IS_ERR(pd->va))
return PTR_ERR(pd->va);
- r = __prci_register_clocks(dev, pd);
+ r = __prci_register_clocks(dev, pd, desc);
if (r) {
dev_err(dev, "could not register clocks: %d\n", r);
return r;
}
- dev_dbg(dev, "SiFive FU540 PRCI probed\n");
+ dev_dbg(dev, "SiFive PRCI probed\n");
return 0;
}
-static const struct of_device_id sifive_fu540_prci_of_match[] = {
- { .compatible = "sifive,fu540-c000-prci", },
+static const struct of_device_id sifive_prci_of_match[] = {
+ {.compatible = "sifive,fu540-c000-prci", .data = &prci_clk_fu540},
{}
};
-MODULE_DEVICE_TABLE(of, sifive_fu540_prci_of_match);
-static struct platform_driver sifive_fu540_prci_driver = {
- .driver = {
- .name = "sifive-fu540-prci",
- .of_match_table = sifive_fu540_prci_of_match,
+static struct platform_driver sifive_prci_driver = {
+ .driver = {
+ .name = "sifive-clk-prci",
+ .of_match_table = sifive_prci_of_match,
},
- .probe = sifive_fu540_prci_probe,
+ .probe = sifive_prci_probe,
};
-static int __init sifive_fu540_prci_init(void)
+static int __init sifive_prci_init(void)
{
- return platform_driver_register(&sifive_fu540_prci_driver);
+ return platform_driver_register(&sifive_prci_driver);
}
-core_initcall(sifive_fu540_prci_init);
+core_initcall(sifive_prci_init);
diff --git a/drivers/clk/sifive/sifive-prci.h b/drivers/clk/sifive/sifive-prci.h
new file mode 100644
index 000000000000..025f717bc053
--- /dev/null
+++ b/drivers/clk/sifive/sifive-prci.h
@@ -0,0 +1,201 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018-2019 SiFive, Inc.
+ * Wesley Terpstra
+ * Paul Walmsley
+ * Zong Li
+ */
+
+#ifndef __SIFIVE_CLK_SIFIVE_PRCI_H
+#define __SIFIVE_CLK_SIFIVE_PRCI_H
+
+#include <linux/clk/analogbits-wrpll-cln28hpc.h>
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+
+/*
+ * EXPECTED_CLK_PARENT_COUNT: how many parent clocks this driver expects:
+ * hfclk and rtcclk
+ */
+#define EXPECTED_CLK_PARENT_COUNT 2
+
+/*
+ * Register offsets and bitmasks
+ */
+
+/* COREPLLCFG0 */
+#define PRCI_COREPLLCFG0_OFFSET 0x4
+#define PRCI_COREPLLCFG0_DIVR_SHIFT 0
+#define PRCI_COREPLLCFG0_DIVR_MASK (0x3f << PRCI_COREPLLCFG0_DIVR_SHIFT)
+#define PRCI_COREPLLCFG0_DIVF_SHIFT 6
+#define PRCI_COREPLLCFG0_DIVF_MASK (0x1ff << PRCI_COREPLLCFG0_DIVF_SHIFT)
+#define PRCI_COREPLLCFG0_DIVQ_SHIFT 15
+#define PRCI_COREPLLCFG0_DIVQ_MASK (0x7 << PRCI_COREPLLCFG0_DIVQ_SHIFT)
+#define PRCI_COREPLLCFG0_RANGE_SHIFT 18
+#define PRCI_COREPLLCFG0_RANGE_MASK (0x7 << PRCI_COREPLLCFG0_RANGE_SHIFT)
+#define PRCI_COREPLLCFG0_BYPASS_SHIFT 24
+#define PRCI_COREPLLCFG0_BYPASS_MASK (0x1 << PRCI_COREPLLCFG0_BYPASS_SHIFT)
+#define PRCI_COREPLLCFG0_FSE_SHIFT 25
+#define PRCI_COREPLLCFG0_FSE_MASK (0x1 << PRCI_COREPLLCFG0_FSE_SHIFT)
+#define PRCI_COREPLLCFG0_LOCK_SHIFT 31
+#define PRCI_COREPLLCFG0_LOCK_MASK (0x1 << PRCI_COREPLLCFG0_LOCK_SHIFT)
+
+/* DDRPLLCFG0 */
+#define PRCI_DDRPLLCFG0_OFFSET 0xc
+#define PRCI_DDRPLLCFG0_DIVR_SHIFT 0
+#define PRCI_DDRPLLCFG0_DIVR_MASK (0x3f << PRCI_DDRPLLCFG0_DIVR_SHIFT)
+#define PRCI_DDRPLLCFG0_DIVF_SHIFT 6
+#define PRCI_DDRPLLCFG0_DIVF_MASK (0x1ff << PRCI_DDRPLLCFG0_DIVF_SHIFT)
+#define PRCI_DDRPLLCFG0_DIVQ_SHIFT 15
+#define PRCI_DDRPLLCFG0_DIVQ_MASK (0x7 << PRCI_DDRPLLCFG0_DIVQ_SHIFT)
+#define PRCI_DDRPLLCFG0_RANGE_SHIFT 18
+#define PRCI_DDRPLLCFG0_RANGE_MASK (0x7 << PRCI_DDRPLLCFG0_RANGE_SHIFT)
+#define PRCI_DDRPLLCFG0_BYPASS_SHIFT 24
+#define PRCI_DDRPLLCFG0_BYPASS_MASK (0x1 << PRCI_DDRPLLCFG0_BYPASS_SHIFT)
+#define PRCI_DDRPLLCFG0_FSE_SHIFT 25
+#define PRCI_DDRPLLCFG0_FSE_MASK (0x1 << PRCI_DDRPLLCFG0_FSE_SHIFT)
+#define PRCI_DDRPLLCFG0_LOCK_SHIFT 31
+#define PRCI_DDRPLLCFG0_LOCK_MASK (0x1 << PRCI_DDRPLLCFG0_LOCK_SHIFT)
+
+/* DDRPLLCFG1 */
+#define PRCI_DDRPLLCFG1_OFFSET 0x10
+#define PRCI_DDRPLLCFG1_CKE_SHIFT 24
+#define PRCI_DDRPLLCFG1_CKE_MASK (0x1 << PRCI_DDRPLLCFG1_CKE_SHIFT)
+
+/* GEMGXLPLLCFG0 */
+#define PRCI_GEMGXLPLLCFG0_OFFSET 0x1c
+#define PRCI_GEMGXLPLLCFG0_DIVR_SHIFT 0
+#define PRCI_GEMGXLPLLCFG0_DIVR_MASK (0x3f << PRCI_GEMGXLPLLCFG0_DIVR_SHIFT)
+#define PRCI_GEMGXLPLLCFG0_DIVF_SHIFT 6
+#define PRCI_GEMGXLPLLCFG0_DIVF_MASK (0x1ff << PRCI_GEMGXLPLLCFG0_DIVF_SHIFT)
+#define PRCI_GEMGXLPLLCFG0_DIVQ_SHIFT 15
+#define PRCI_GEMGXLPLLCFG0_DIVQ_MASK (0x7 << PRCI_GEMGXLPLLCFG0_DIVQ_SHIFT)
+#define PRCI_GEMGXLPLLCFG0_RANGE_SHIFT 18
+#define PRCI_GEMGXLPLLCFG0_RANGE_MASK (0x7 << PRCI_GEMGXLPLLCFG0_RANGE_SHIFT)
+#define PRCI_GEMGXLPLLCFG0_BYPASS_SHIFT 24
+#define PRCI_GEMGXLPLLCFG0_BYPASS_MASK (0x1 << PRCI_GEMGXLPLLCFG0_BYPASS_SHIFT)
+#define PRCI_GEMGXLPLLCFG0_FSE_SHIFT 25
+#define PRCI_GEMGXLPLLCFG0_FSE_MASK (0x1 << PRCI_GEMGXLPLLCFG0_FSE_SHIFT)
+#define PRCI_GEMGXLPLLCFG0_LOCK_SHIFT 31
+#define PRCI_GEMGXLPLLCFG0_LOCK_MASK (0x1 << PRCI_GEMGXLPLLCFG0_LOCK_SHIFT)
+
+/* GEMGXLPLLCFG1 */
+#define PRCI_GEMGXLPLLCFG1_OFFSET 0x20
+#define RCI_GEMGXLPLLCFG1_CKE_SHIFT 24
+#define PRCI_GEMGXLPLLCFG1_CKE_MASK (0x1 << PRCI_GEMGXLPLLCFG1_CKE_SHIFT)
+
+/* CORECLKSEL */
+#define PRCI_CORECLKSEL_OFFSET 0x24
+#define PRCI_CORECLKSEL_CORECLKSEL_SHIFT 0
+#define PRCI_CORECLKSEL_CORECLKSEL_MASK \
+ (0x1 << PRCI_CORECLKSEL_CORECLKSEL_SHIFT)
+
+/* DEVICESRESETREG */
+#define PRCI_DEVICESRESETREG_OFFSET 0x28
+#define PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_SHIFT 0
+#define PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_MASK \
+ (0x1 << PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_SHIFT)
+#define PRCI_DEVICESRESETREG_DDR_AXI_RST_N_SHIFT 1
+#define PRCI_DEVICESRESETREG_DDR_AXI_RST_N_MASK \
+ (0x1 << PRCI_DEVICESRESETREG_DDR_AXI_RST_N_SHIFT)
+#define PRCI_DEVICESRESETREG_DDR_AHB_RST_N_SHIFT 2
+#define PRCI_DEVICESRESETREG_DDR_AHB_RST_N_MASK \
+ (0x1 << PRCI_DEVICESRESETREG_DDR_AHB_RST_N_SHIFT)
+#define PRCI_DEVICESRESETREG_DDR_PHY_RST_N_SHIFT 3
+#define PRCI_DEVICESRESETREG_DDR_PHY_RST_N_MASK \
+ (0x1 << PRCI_DEVICESRESETREG_DDR_PHY_RST_N_SHIFT)
+#define PRCI_DEVICESRESETREG_GEMGXL_RST_N_SHIFT 5
+#define PRCI_DEVICESRESETREG_GEMGXL_RST_N_MASK \
+ (0x1 << PRCI_DEVICESRESETREG_GEMGXL_RST_N_SHIFT)
+#define PRCI_DEVICESRESETREG_CHIPLINK_RST_N_SHIFT 6
+#define PRCI_DEVICESRESETREG_CHIPLINK_RST_N_MASK \
+ (0x1 << PRCI_DEVICESRESETREG_CHIPLINK_RST_N_SHIFT)
+
+/* CLKMUXSTATUSREG */
+#define PRCI_CLKMUXSTATUSREG_OFFSET 0x2c
+#define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT 1
+#define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_MASK \
+ (0x1 << PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT)
+
+/*
+ * Private structures
+ */
+
+/**
+ * struct __prci_data - per-device-instance data
+ * @va: base virtual address of the PRCI IP block
+ * @hw_clks: encapsulates struct clk_hw records
+ *
+ * PRCI per-device instance data
+ */
+struct __prci_data {
+ void __iomem *va;
+ struct clk_hw_onecell_data hw_clks;
+};
+
+/**
+ * struct __prci_wrpll_data - WRPLL configuration and integration data
+ * @c: WRPLL current configuration record
+ * @enable_bypass: fn ptr to code to bypass the WRPLL (if applicable; else NULL)
+ * @disable_bypass: fn ptr to code to not bypass the WRPLL (or NULL)
+ * @cfg0_offs: WRPLL CFG0 register offset (in bytes) from the PRCI base address
+ *
+ * @enable_bypass and @disable_bypass are used for WRPLL instances
+ * that contain a separate external glitchless clock mux downstream
+ * from the PLL. The WRPLL internal bypass mux is not glitchless.
+ */
+struct __prci_wrpll_data {
+ struct wrpll_cfg c;
+ void (*enable_bypass)(struct __prci_data *pd);
+ void (*disable_bypass)(struct __prci_data *pd);
+ u8 cfg0_offs;
+};
+
+/**
+ * struct __prci_clock - describes a clock device managed by PRCI
+ * @name: user-readable clock name string - should match the manual
+ * @parent_name: parent name for this clock
+ * @ops: struct clk_ops for the Linux clock framework to use for control
+ * @hw: Linux-private clock data
+ * @pwd: WRPLL-specific data, associated with this clock (if not NULL)
+ * @pd: PRCI-specific data associated with this clock (if not NULL)
+ *
+ * PRCI clock data. Used by the PRCI driver to register PRCI-provided
+ * clocks to the Linux clock infrastructure.
+ */
+struct __prci_clock {
+ const char *name;
+ const char *parent_name;
+ const struct clk_ops *ops;
+ struct clk_hw hw;
+ struct __prci_wrpll_data *pwd;
+ struct __prci_data *pd;
+};
+
+#define clk_hw_to_prci_clock(pwd) container_of(pwd, struct __prci_clock, hw)
+
+/*
+ * struct prci_clk_desc - describes the information of clocks of each SoCs
+ * @clks: point to a array of __prci_clock
+ * @num_clks: the number of element of clks
+ */
+struct prci_clk_desc {
+ struct __prci_clock *clks;
+ size_t num_clks;
+};
+
+/* Core clock mux control */
+void sifive_prci_coreclksel_use_hfclk(struct __prci_data *pd);
+void sifive_prci_coreclksel_use_corepll(struct __prci_data *pd);
+
+/* Linux clock framework integration */
+long sifive_prci_wrpll_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate);
+int sifive_prci_wrpll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate);
+unsigned long sifive_prci_wrpll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate);
+unsigned long sifive_prci_tlclksel_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate);
+
+#endif /* __SIFIVE_CLK_SIFIVE_PRCI_H */
--
2.29.2
Add driver code for the SiFive FU740 PRCI IP block. This IP block
handles reset and clock control for the SiFive FU740 device and
implements SoC-level clock tree controls and dividers.
This driver contains bug fixes and contributions from
Henry Styles <[email protected]> and Erik Danie <[email protected]>.
Signed-off-by: Zong Li <[email protected]>
Cc: Henry Styles <[email protected]>
Cc: Erik Danie <[email protected]>
---
drivers/clk/sifive/Kconfig | 4 +-
drivers/clk/sifive/Makefile | 1 +
drivers/clk/sifive/fu740-prci.c | 122 ++++++++++++++++++
drivers/clk/sifive/fu740-prci.h | 21 +++
drivers/clk/sifive/sifive-prci.c | 120 +++++++++++++++++
drivers/clk/sifive/sifive-prci.h | 88 +++++++++++++
include/dt-bindings/clock/sifive-fu740-prci.h | 23 ++++
7 files changed, 377 insertions(+), 2 deletions(-)
create mode 100644 drivers/clk/sifive/fu740-prci.c
create mode 100644 drivers/clk/sifive/fu740-prci.h
create mode 100644 include/dt-bindings/clock/sifive-fu740-prci.h
diff --git a/drivers/clk/sifive/Kconfig b/drivers/clk/sifive/Kconfig
index ab48cf7e0105..1c14eb20c066 100644
--- a/drivers/clk/sifive/Kconfig
+++ b/drivers/clk/sifive/Kconfig
@@ -13,7 +13,7 @@ config CLK_SIFIVE_PRCI
select CLK_ANALOGBITS_WRPLL_CLN28HPC
help
Supports the Power Reset Clock interface (PRCI) IP block found in
- FU540 SoCs. If this kernel is meant to run on a SiFive FU540 SoC,
- enable this driver.
+ FU540/FU740 SoCs. If this kernel is meant to run on a SiFive FU540/
+ FU740 SoCs, enable this driver.
endif
diff --git a/drivers/clk/sifive/Makefile b/drivers/clk/sifive/Makefile
index fe3e2cb4c4d8..2c05798e4ba4 100644
--- a/drivers/clk/sifive/Makefile
+++ b/drivers/clk/sifive/Makefile
@@ -2,3 +2,4 @@
obj-y += sifive-prci.o
obj-$(CONFIG_CLK_SIFIVE_PRCI) += fu540-prci.o
+obj-$(CONFIG_CLK_SIFIVE_PRCI) += fu740-prci.o
diff --git a/drivers/clk/sifive/fu740-prci.c b/drivers/clk/sifive/fu740-prci.c
new file mode 100644
index 000000000000..3b87e273c3eb
--- /dev/null
+++ b/drivers/clk/sifive/fu740-prci.c
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018-2019 SiFive, Inc.
+ * Wesley Terpstra
+ * Paul Walmsley
+ * Zong Li
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/clock/sifive-fu740-prci.h>
+#include <linux/module.h>
+#include "sifive-prci.h"
+
+/* PRCI integration data for each WRPLL instance */
+
+static struct __prci_wrpll_data __prci_corepll_data = {
+ .cfg0_offs = PRCI_COREPLLCFG0_OFFSET,
+ .enable_bypass = sifive_prci_coreclksel_use_hfclk,
+ .disable_bypass = sifive_prci_coreclksel_use_final_corepll,
+};
+
+static struct __prci_wrpll_data __prci_ddrpll_data = {
+ .cfg0_offs = PRCI_DDRPLLCFG0_OFFSET,
+};
+
+static struct __prci_wrpll_data __prci_gemgxlpll_data = {
+ .cfg0_offs = PRCI_GEMGXLPLLCFG0_OFFSET,
+};
+
+static struct __prci_wrpll_data __prci_dvfscorepll_data = {
+ .cfg0_offs = PRCI_DVFSCOREPLLCFG0_OFFSET,
+ .enable_bypass = sifive_prci_corepllsel_use_corepll,
+ .disable_bypass = sifive_prci_corepllsel_use_dvfscorepll,
+};
+
+static struct __prci_wrpll_data __prci_hfpclkpll_data = {
+ .cfg0_offs = PRCI_HFPCLKPLLCFG0_OFFSET,
+ .enable_bypass = sifive_prci_hfpclkpllsel_use_hfclk,
+ .disable_bypass = sifive_prci_hfpclkpllsel_use_hfpclkpll,
+};
+
+static struct __prci_wrpll_data __prci_cltxpll_data = {
+ .cfg0_offs = PRCI_CLTXPLLCFG0_OFFSET,
+};
+
+/* Linux clock framework integration */
+
+static const struct clk_ops sifive_fu740_prci_wrpll_clk_ops = {
+ .set_rate = sifive_prci_wrpll_set_rate,
+ .round_rate = sifive_prci_wrpll_round_rate,
+ .recalc_rate = sifive_prci_wrpll_recalc_rate,
+};
+
+static const struct clk_ops sifive_fu740_prci_wrpll_ro_clk_ops = {
+ .recalc_rate = sifive_prci_wrpll_recalc_rate,
+};
+
+static const struct clk_ops sifive_fu740_prci_tlclksel_clk_ops = {
+ .recalc_rate = sifive_prci_tlclksel_recalc_rate,
+};
+
+static const struct clk_ops sifive_fu740_prci_hfpclkplldiv_clk_ops = {
+ .recalc_rate = sifive_prci_hfpclkplldiv_recalc_rate,
+};
+
+/* List of clock controls provided by the PRCI */
+struct __prci_clock __prci_init_clocks_fu740[] = {
+ [PRCI_CLK_COREPLL] = {
+ .name = "corepll",
+ .parent_name = "hfclk",
+ .ops = &sifive_fu740_prci_wrpll_clk_ops,
+ .pwd = &__prci_corepll_data,
+ },
+ [PRCI_CLK_DDRPLL] = {
+ .name = "ddrpll",
+ .parent_name = "hfclk",
+ .ops = &sifive_fu740_prci_wrpll_ro_clk_ops,
+ .pwd = &__prci_ddrpll_data,
+ },
+ [PRCI_CLK_GEMGXLPLL] = {
+ .name = "gemgxlpll",
+ .parent_name = "hfclk",
+ .ops = &sifive_fu740_prci_wrpll_clk_ops,
+ .pwd = &__prci_gemgxlpll_data,
+ },
+ [PRCI_CLK_DVFSCOREPLL] = {
+ .name = "dvfscorepll",
+ .parent_name = "hfclk",
+ .ops = &sifive_fu740_prci_wrpll_clk_ops,
+ .pwd = &__prci_dvfscorepll_data,
+ },
+ [PRCI_CLK_HFPCLKPLL] = {
+ .name = "hfpclkpll",
+ .parent_name = "hfclk",
+ .ops = &sifive_fu740_prci_wrpll_clk_ops,
+ .pwd = &__prci_hfpclkpll_data,
+ },
+ [PRCI_CLK_CLTXPLL] = {
+ .name = "cltxpll",
+ .parent_name = "hfclk",
+ .ops = &sifive_fu740_prci_wrpll_clk_ops,
+ .pwd = &__prci_cltxpll_data,
+ },
+ [PRCI_CLK_TLCLK] = {
+ .name = "tlclk",
+ .parent_name = "corepll",
+ .ops = &sifive_fu740_prci_tlclksel_clk_ops,
+ },
+ [PRCI_CLK_PCLK] = {
+ .name = "pclk",
+ .parent_name = "hfpclkpll",
+ .ops = &sifive_fu740_prci_hfpclkplldiv_clk_ops,
+ },
+};
diff --git a/drivers/clk/sifive/fu740-prci.h b/drivers/clk/sifive/fu740-prci.h
new file mode 100644
index 000000000000..13ef971f7764
--- /dev/null
+++ b/drivers/clk/sifive/fu740-prci.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 SiFive, Inc.
+ * Zong Li
+ */
+
+#ifndef __SIFIVE_CLK_FU740_PRCI_H
+#define __SIFIVE_CLK_FU740_PRCI_H
+
+#include "sifive-prci.h"
+
+#define NUM_CLOCK_FU740 8
+
+extern struct __prci_clock __prci_init_clocks_fu740[NUM_CLOCK_FU740];
+
+static const struct prci_clk_desc prci_clk_fu740 = {
+ .clks = __prci_init_clocks_fu740,
+ .num_clks = ARRAY_SIZE(__prci_init_clocks_fu740),
+};
+
+#endif /* __SIFIVE_CLK_FU740_PRCI_H */
diff --git a/drivers/clk/sifive/sifive-prci.c b/drivers/clk/sifive/sifive-prci.c
index 0ac729eeb71b..4098dbc5881a 100644
--- a/drivers/clk/sifive/sifive-prci.c
+++ b/drivers/clk/sifive/sifive-prci.c
@@ -27,6 +27,7 @@
#include <linux/of_device.h>
#include "sifive-prci.h"
#include "fu540-prci.h"
+#include "fu740-prci.h"
/*
* Private functions
@@ -242,6 +243,18 @@ unsigned long sifive_prci_tlclksel_recalc_rate(struct clk_hw *hw,
return div_u64(parent_rate, div);
}
+/* HFPCLK clock integration */
+
+unsigned long sifive_prci_hfpclkplldiv_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
+ struct __prci_data *pd = pc->pd;
+ u32 div = __prci_readl(pd, PRCI_HFPCLKPLLDIV_OFFSET);
+
+ return div_u64(parent_rate, div + 2);
+}
+
/*
* Core clock mux control
*/
@@ -287,6 +300,112 @@ void sifive_prci_coreclksel_use_corepll(struct __prci_data *pd)
r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */
}
+/**
+ * sifive_prci_coreclksel_use_final_corepll() - switch the CORECLK mux to output
+ * FINAL_COREPLL
+ * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg
+ *
+ * Switch the CORECLK mux to the final COREPLL output clock; return once
+ * complete.
+ *
+ * Context: Any context. Caller must prevent concurrent changes to the
+ * PRCI_CORECLKSEL_OFFSET register.
+ */
+void sifive_prci_coreclksel_use_final_corepll(struct __prci_data *pd)
+{
+ u32 r;
+
+ r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET);
+ r &= ~PRCI_CORECLKSEL_CORECLKSEL_MASK;
+ __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd);
+
+ r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */
+}
+
+/**
+ * sifive_prci_corepllsel_use_dvfscorepll() - switch the COREPLL mux to
+ * output DVFS_COREPLL
+ * @pd: struct __prci_data * for the PRCI containing the COREPLL mux reg
+ *
+ * Switch the COREPLL mux to the DVFSCOREPLL output clock; return once complete.
+ *
+ * Context: Any context. Caller must prevent concurrent changes to the
+ * PRCI_COREPLLSEL_OFFSET register.
+ */
+void sifive_prci_corepllsel_use_dvfscorepll(struct __prci_data *pd)
+{
+ u32 r;
+
+ r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET);
+ r |= PRCI_COREPLLSEL_COREPLLSEL_MASK;
+ __prci_writel(r, PRCI_COREPLLSEL_OFFSET, pd);
+
+ r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET); /* barrier */
+}
+
+/**
+ * sifive_prci_corepllsel_use_corepll() - switch the COREPLL mux to
+ * output COREPLL
+ * @pd: struct __prci_data * for the PRCI containing the COREPLL mux reg
+ *
+ * Switch the COREPLL mux to the COREPLL output clock; return once complete.
+ *
+ * Context: Any context. Caller must prevent concurrent changes to the
+ * PRCI_COREPLLSEL_OFFSET register.
+ */
+void sifive_prci_corepllsel_use_corepll(struct __prci_data *pd)
+{
+ u32 r;
+
+ r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET);
+ r &= ~PRCI_COREPLLSEL_COREPLLSEL_MASK;
+ __prci_writel(r, PRCI_COREPLLSEL_OFFSET, pd);
+
+ r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET); /* barrier */
+}
+
+/**
+ * sifive_prci_hfpclkpllsel_use_hfclk() - switch the HFPCLKPLL mux to
+ * output HFCLK
+ * @pd: struct __prci_data * for the PRCI containing the HFPCLKPLL mux reg
+ *
+ * Switch the HFPCLKPLL mux to the HFCLK input source; return once complete.
+ *
+ * Context: Any context. Caller must prevent concurrent changes to the
+ * PRCI_HFPCLKPLLSEL_OFFSET register.
+ */
+void sifive_prci_hfpclkpllsel_use_hfclk(struct __prci_data *pd)
+{
+ u32 r;
+
+ r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET);
+ r |= PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_MASK;
+ __prci_writel(r, PRCI_HFPCLKPLLSEL_OFFSET, pd);
+
+ r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET); /* barrier */
+}
+
+/**
+ * sifive_prci_hfpclkpllsel_use_hfpclkpll() - switch the HFPCLKPLL mux to
+ * output HFPCLKPLL
+ * @pd: struct __prci_data * for the PRCI containing the HFPCLKPLL mux reg
+ *
+ * Switch the HFPCLKPLL mux to the HFPCLKPLL output clock; return once complete.
+ *
+ * Context: Any context. Caller must prevent concurrent changes to the
+ * PRCI_HFPCLKPLLSEL_OFFSET register.
+ */
+void sifive_prci_hfpclkpllsel_use_hfpclkpll(struct __prci_data *pd)
+{
+ u32 r;
+
+ r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET);
+ r &= ~PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_MASK;
+ __prci_writel(r, PRCI_HFPCLKPLLSEL_OFFSET, pd);
+
+ r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET); /* barrier */
+}
+
/**
* __prci_register_clocks() - register clock controls in the PRCI
* @dev: Linux struct device *
@@ -391,6 +510,7 @@ static int sifive_prci_probe(struct platform_device *pdev)
static const struct of_device_id sifive_prci_of_match[] = {
{.compatible = "sifive,fu540-c000-prci", .data = &prci_clk_fu540},
+ {.compatible = "sifive,fu740-c000-prci", .data = &prci_clk_fu740},
{}
};
diff --git a/drivers/clk/sifive/sifive-prci.h b/drivers/clk/sifive/sifive-prci.h
index 025f717bc053..bc0646bc9c3e 100644
--- a/drivers/clk/sifive/sifive-prci.h
+++ b/drivers/clk/sifive/sifive-prci.h
@@ -117,6 +117,87 @@
#define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_MASK \
(0x1 << PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT)
+/* CLTXPLLCFG0 */
+#define PRCI_CLTXPLLCFG0_OFFSET 0x30
+#define PRCI_CLTXPLLCFG0_DIVR_SHIFT 0
+#define PRCI_CLTXPLLCFG0_DIVR_MASK (0x3f << PRCI_CLTXPLLCFG0_DIVR_SHIFT)
+#define PRCI_CLTXPLLCFG0_DIVF_SHIFT 6
+#define PRCI_CLTXPLLCFG0_DIVF_MASK (0x1ff << PRCI_CLTXPLLCFG0_DIVF_SHIFT)
+#define PRCI_CLTXPLLCFG0_DIVQ_SHIFT 15
+#define PRCI_CLTXPLLCFG0_DIVQ_MASK (0x7 << PRCI_CLTXPLLCFG0_DIVQ_SHIFT)
+#define PRCI_CLTXPLLCFG0_RANGE_SHIFT 18
+#define PRCI_CLTXPLLCFG0_RANGE_MASK (0x7 << PRCI_CLTXPLLCFG0_RANGE_SHIFT)
+#define PRCI_CLTXPLLCFG0_BYPASS_SHIFT 24
+#define PRCI_CLTXPLLCFG0_BYPASS_MASK (0x1 << PRCI_CLTXPLLCFG0_BYPASS_SHIFT)
+#define PRCI_CLTXPLLCFG0_FSE_SHIFT 25
+#define PRCI_CLTXPLLCFG0_FSE_MASK (0x1 << PRCI_CLTXPLLCFG0_FSE_SHIFT)
+#define PRCI_CLTXPLLCFG0_LOCK_SHIFT 31
+#define PRCI_CLTXPLLCFG0_LOCK_MASK (0x1 << PRCI_CLTXPLLCFG0_LOCK_SHIFT)
+
+/* CLTXPLLCFG1 */
+#define PRCI_CLTXPLLCFG1_OFFSET 0x34
+#define PRCI_CLTXPLLCFG1_CKE_SHIFT 24
+#define PRCI_CLTXPLLCFG1_CKE_MASK (0x1 << PRCI_CLTXPLLCFG1_CKE_SHIFT)
+
+/* DVFSCOREPLLCFG0 */
+#define PRCI_DVFSCOREPLLCFG0_OFFSET 0x38
+
+/* DVFSCOREPLLCFG1 */
+#define PRCI_DVFSCOREPLLCFG1_OFFSET 0x3c
+#define PRCI_DVFSCOREPLLCFG1_CKE_SHIFT 24
+#define PRCI_DVFSCOREPLLCFG1_CKE_MASK (0x1 << PRCI_DVFSCOREPLLCFG1_CKE_SHIFT)
+
+/* COREPLLSEL */
+#define PRCI_COREPLLSEL_OFFSET 0x40
+#define PRCI_COREPLLSEL_COREPLLSEL_SHIFT 0
+#define PRCI_COREPLLSEL_COREPLLSEL_MASK \
+ (0x1 << PRCI_COREPLLSEL_COREPLLSEL_SHIFT)
+
+/* HFPCLKPLLCFG0 */
+#define PRCI_HFPCLKPLLCFG0_OFFSET 0x50
+#define PRCI_HFPCLKPLL_CFG0_DIVR_SHIFT 0
+#define PRCI_HFPCLKPLL_CFG0_DIVR_MASK \
+ (0x3f << PRCI_HFPCLKPLLCFG0_DIVR_SHIFT)
+#define PRCI_HFPCLKPLL_CFG0_DIVF_SHIFT 6
+#define PRCI_HFPCLKPLL_CFG0_DIVF_MASK \
+ (0x1ff << PRCI_HFPCLKPLLCFG0_DIVF_SHIFT)
+#define PRCI_HFPCLKPLL_CFG0_DIVQ_SHIFT 15
+#define PRCI_HFPCLKPLL_CFG0_DIVQ_MASK \
+ (0x7 << PRCI_HFPCLKPLLCFG0_DIVQ_SHIFT)
+#define PRCI_HFPCLKPLL_CFG0_RANGE_SHIFT 18
+#define PRCI_HFPCLKPLL_CFG0_RANGE_MASK \
+ (0x7 << PRCI_HFPCLKPLLCFG0_RANGE_SHIFT)
+#define PRCI_HFPCLKPLL_CFG0_BYPASS_SHIFT 24
+#define PRCI_HFPCLKPLL_CFG0_BYPASS_MASK \
+ (0x1 << PRCI_HFPCLKPLLCFG0_BYPASS_SHIFT)
+#define PRCI_HFPCLKPLL_CFG0_FSE_SHIFT 25
+#define PRCI_HFPCLKPLL_CFG0_FSE_MASK \
+ (0x1 << PRCI_HFPCLKPLLCFG0_FSE_SHIFT)
+#define PRCI_HFPCLKPLL_CFG0_LOCK_SHIFT 31
+#define PRCI_HFPCLKPLL_CFG0_LOCK_MASK \
+ (0x1 << PRCI_HFPCLKPLLCFG0_LOCK_SHIFT)
+
+/* HFPCLKPLLCFG1 */
+#define PRCI_HFPCLKPLLCFG1_OFFSET 0x54
+#define PRCI_HFPCLKPLLCFG1_CKE_SHIFT 24
+#define PRCI_HFPCLKPLLCFG1_CKE_MASK \
+ (0x1 << PRCI_HFPCLKPLLCFG1_CKE_SHIFT)
+
+/* HFPCLKPLLSEL */
+#define PRCI_HFPCLKPLLSEL_OFFSET 0x58
+#define PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_SHIFT 0
+#define PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_MASK \
+ (0x1 << PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_SHIFT)
+
+/* HFPCLKPLLDIV */
+#define PRCI_HFPCLKPLLDIV_OFFSET 0x5c
+
+/* PRCIPLL */
+#define PRCI_PRCIPLL_OFFSET 0xe0
+
+/* PROCMONCFG */
+#define PRCI_PROCMONCFG_OFFSET 0xf0
+
/*
* Private structures
*/
@@ -187,6 +268,11 @@ struct prci_clk_desc {
/* Core clock mux control */
void sifive_prci_coreclksel_use_hfclk(struct __prci_data *pd);
void sifive_prci_coreclksel_use_corepll(struct __prci_data *pd);
+void sifive_prci_coreclksel_use_final_corepll(struct __prci_data *pd);
+void sifive_prci_corepllsel_use_dvfscorepll(struct __prci_data *pd);
+void sifive_prci_corepllsel_use_corepll(struct __prci_data *pd);
+void sifive_prci_hfpclkpllsel_use_hfclk(struct __prci_data *pd);
+void sifive_prci_hfpclkpllsel_use_hfpclkpll(struct __prci_data *pd);
/* Linux clock framework integration */
long sifive_prci_wrpll_round_rate(struct clk_hw *hw, unsigned long rate,
@@ -197,5 +283,7 @@ unsigned long sifive_prci_wrpll_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate);
unsigned long sifive_prci_tlclksel_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate);
+unsigned long sifive_prci_hfpclkplldiv_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate);
#endif /* __SIFIVE_CLK_SIFIVE_PRCI_H */
diff --git a/include/dt-bindings/clock/sifive-fu740-prci.h b/include/dt-bindings/clock/sifive-fu740-prci.h
new file mode 100644
index 000000000000..cd7706ea5677
--- /dev/null
+++ b/include/dt-bindings/clock/sifive-fu740-prci.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/*
+ * Copyright (C) 2019 SiFive, Inc.
+ * Wesley Terpstra
+ * Paul Walmsley
+ * Zong Li
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_SIFIVE_FU740_PRCI_H
+#define __DT_BINDINGS_CLOCK_SIFIVE_FU740_PRCI_H
+
+/* Clock indexes for use by Device Tree data and the PRCI driver */
+
+#define PRCI_CLK_COREPLL 0
+#define PRCI_CLK_DDRPLL 1
+#define PRCI_CLK_GEMGXLPLL 2
+#define PRCI_CLK_DVFSCOREPLL 3
+#define PRCI_CLK_HFPCLKPLL 4
+#define PRCI_CLK_CLTXPLL 5
+#define PRCI_CLK_TLCLK 6
+#define PRCI_CLK_PCLK 7
+
+#endif /* __DT_BINDINGS_CLOCK_SIFIVE_FU740_PRCI_H */
--
2.29.2
Use generic name CLK_SIFIVE_PRCI instead of CLK_SIFIVE_FU540_PRCI. This
patch is prepared for fu740 support.
Signed-off-by: Zong Li <[email protected]>
Reviewed-by: Palmer Dabbelt <[email protected]>
Acked-by: Palmer Dabbelt <[email protected]>
---
arch/riscv/Kconfig.socs | 2 +-
drivers/clk/sifive/Kconfig | 6 +++---
drivers/clk/sifive/Makefile | 2 +-
3 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
index 8a55f6156661..3284d5c291be 100644
--- a/arch/riscv/Kconfig.socs
+++ b/arch/riscv/Kconfig.socs
@@ -5,7 +5,7 @@ config SOC_SIFIVE
select SERIAL_SIFIVE if TTY
select SERIAL_SIFIVE_CONSOLE if TTY
select CLK_SIFIVE
- select CLK_SIFIVE_FU540_PRCI
+ select CLK_SIFIVE_PRCI
select SIFIVE_PLIC
help
This enables support for SiFive SoC platform hardware.
diff --git a/drivers/clk/sifive/Kconfig b/drivers/clk/sifive/Kconfig
index f3b4eb9cb0f5..ab48cf7e0105 100644
--- a/drivers/clk/sifive/Kconfig
+++ b/drivers/clk/sifive/Kconfig
@@ -8,12 +8,12 @@ menuconfig CLK_SIFIVE
if CLK_SIFIVE
-config CLK_SIFIVE_FU540_PRCI
- bool "PRCI driver for SiFive FU540 SoCs"
+config CLK_SIFIVE_PRCI
+ bool "PRCI driver for SiFive SoCs"
select CLK_ANALOGBITS_WRPLL_CLN28HPC
help
Supports the Power Reset Clock interface (PRCI) IP block found in
- FU540 SoCs. If this kernel is meant to run on a SiFive FU540 SoC,
+ FU540 SoCs. If this kernel is meant to run on a SiFive FU540 SoC,
enable this driver.
endif
diff --git a/drivers/clk/sifive/Makefile b/drivers/clk/sifive/Makefile
index 627effe2ece1..fe3e2cb4c4d8 100644
--- a/drivers/clk/sifive/Makefile
+++ b/drivers/clk/sifive/Makefile
@@ -1,4 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-y += sifive-prci.o
-obj-$(CONFIG_CLK_SIFIVE_FU540_PRCI) += fu540-prci.o
+obj-$(CONFIG_CLK_SIFIVE_PRCI) += fu540-prci.o
--
2.29.2
Hi Zong,
>-----Original Message-----
>From: linux-riscv <[email protected]> On Behalf Of Zong Li
>Sent: 10 November 2020 12:58
>To: Paul Walmsley ( Sifive) <[email protected]>; [email protected];
>[email protected]; [email protected]; [email protected];
>[email protected]; Yash Shah <[email protected]>; linux-
>[email protected]; [email protected]; linux-
>[email protected]
>Cc: Erik Danie <[email protected]>; Henry Styles ( Sifive) <[email protected]>;
>Zong Li <[email protected]>
>Subject: [PATCH v2 3/3] clk: sifive: Add a driver for the SiFive FU740 PRCI IP
>block
>
>Add driver code for the SiFive FU740 PRCI IP block. This IP block handles reset
>and clock control for the SiFive FU740 device and implements SoC-level clock
>tree controls and dividers.
>
>This driver contains bug fixes and contributions from Henry Styles
><[email protected]> and Erik Danie <[email protected]>.
>
>Signed-off-by: Zong Li <[email protected]>
>Cc: Henry Styles <[email protected]>
>Cc: Erik Danie <[email protected]>
>---
> drivers/clk/sifive/Kconfig | 4 +-
> drivers/clk/sifive/Makefile | 1 +
> drivers/clk/sifive/fu740-prci.c | 122 ++++++++++++++++++
> drivers/clk/sifive/fu740-prci.h | 21 +++
> drivers/clk/sifive/sifive-prci.c | 120 +++++++++++++++++
> drivers/clk/sifive/sifive-prci.h | 88 +++++++++++++
> include/dt-bindings/clock/sifive-fu740-prci.h | 23 ++++
> 7 files changed, 377 insertions(+), 2 deletions(-) create mode 100644
>drivers/clk/sifive/fu740-prci.c create mode 100644 drivers/clk/sifive/fu740-
>prci.h create mode 100644 include/dt-bindings/clock/sifive-fu740-prci.h
>
>diff --git a/drivers/clk/sifive/Kconfig b/drivers/clk/sifive/Kconfig index
>ab48cf7e0105..1c14eb20c066 100644
>--- a/drivers/clk/sifive/Kconfig
>+++ b/drivers/clk/sifive/Kconfig
>@@ -13,7 +13,7 @@ config CLK_SIFIVE_PRCI
> select CLK_ANALOGBITS_WRPLL_CLN28HPC
> help
> Supports the Power Reset Clock interface (PRCI) IP block found in
>- FU540 SoCs. If this kernel is meant to run on a SiFive FU540 SoC,
>- enable this driver.
>+ FU540/FU740 SoCs. If this kernel is meant to run on a SiFive FU540/
>+ FU740 SoCs, enable this driver.
>
> endif
>diff --git a/drivers/clk/sifive/Makefile b/drivers/clk/sifive/Makefile index
>fe3e2cb4c4d8..2c05798e4ba4 100644
>--- a/drivers/clk/sifive/Makefile
>+++ b/drivers/clk/sifive/Makefile
>@@ -2,3 +2,4 @@
> obj-y += sifive-prci.o
>
> obj-$(CONFIG_CLK_SIFIVE_PRCI) += fu540-prci.o
>+obj-$(CONFIG_CLK_SIFIVE_PRCI) += fu740-prci.o
>diff --git a/drivers/clk/sifive/fu740-prci.c b/drivers/clk/sifive/fu740-prci.c new file
>mode 100644 index 000000000000..3b87e273c3eb
>--- /dev/null
>+++ b/drivers/clk/sifive/fu740-prci.c
>@@ -0,0 +1,122 @@
>+// SPDX-License-Identifier: GPL-2.0
>+/*
>+ * Copyright (C) 2018-2019 SiFive, Inc.
>+ * Wesley Terpstra
>+ * Paul Walmsley
>+ * Zong Li
>+ *
>+ * This program is free software; you can redistribute it and/or modify
>+ * it under the terms of the GNU General Public License version 2 as
>+ * published by the Free Software Foundation.
>+ *
>+ * This program is distributed in the hope that it will be useful,
>+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
>+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>+ * GNU General Public License for more details.
>+ */
>+
>+#include <dt-bindings/clock/sifive-fu740-prci.h>
>+#include <linux/module.h>
>+#include "sifive-prci.h"
>+
>+/* PRCI integration data for each WRPLL instance */
>+
>+static struct __prci_wrpll_data __prci_corepll_data = {
>+ .cfg0_offs = PRCI_COREPLLCFG0_OFFSET,
>+ .enable_bypass = sifive_prci_coreclksel_use_hfclk,
>+ .disable_bypass = sifive_prci_coreclksel_use_final_corepll,
>+};
>+
>+static struct __prci_wrpll_data __prci_ddrpll_data = {
>+ .cfg0_offs = PRCI_DDRPLLCFG0_OFFSET,
>+};
>+
>+static struct __prci_wrpll_data __prci_gemgxlpll_data = {
>+ .cfg0_offs = PRCI_GEMGXLPLLCFG0_OFFSET, };
>+
>+static struct __prci_wrpll_data __prci_dvfscorepll_data = {
>+ .cfg0_offs = PRCI_DVFSCOREPLLCFG0_OFFSET,
>+ .enable_bypass = sifive_prci_corepllsel_use_corepll,
>+ .disable_bypass = sifive_prci_corepllsel_use_dvfscorepll,
>+};
>+
>+static struct __prci_wrpll_data __prci_hfpclkpll_data = {
>+ .cfg0_offs = PRCI_HFPCLKPLLCFG0_OFFSET,
>+ .enable_bypass = sifive_prci_hfpclkpllsel_use_hfclk,
>+ .disable_bypass = sifive_prci_hfpclkpllsel_use_hfpclkpll,
>+};
>+
>+static struct __prci_wrpll_data __prci_cltxpll_data = {
>+ .cfg0_offs = PRCI_CLTXPLLCFG0_OFFSET,
>+};
>+
>+/* Linux clock framework integration */
>+
>+static const struct clk_ops sifive_fu740_prci_wrpll_clk_ops = {
>+ .set_rate = sifive_prci_wrpll_set_rate,
>+ .round_rate = sifive_prci_wrpll_round_rate,
>+ .recalc_rate = sifive_prci_wrpll_recalc_rate, };
>+
>+static const struct clk_ops sifive_fu740_prci_wrpll_ro_clk_ops = {
>+ .recalc_rate = sifive_prci_wrpll_recalc_rate, };
>+
>+static const struct clk_ops sifive_fu740_prci_tlclksel_clk_ops = {
>+ .recalc_rate = sifive_prci_tlclksel_recalc_rate, };
>+
>+static const struct clk_ops sifive_fu740_prci_hfpclkplldiv_clk_ops = {
>+ .recalc_rate = sifive_prci_hfpclkplldiv_recalc_rate,
>+};
>+
>+/* List of clock controls provided by the PRCI */ struct __prci_clock
>+__prci_init_clocks_fu740[] = {
>+ [PRCI_CLK_COREPLL] = {
>+ .name = "corepll",
>+ .parent_name = "hfclk",
>+ .ops = &sifive_fu740_prci_wrpll_clk_ops,
>+ .pwd = &__prci_corepll_data,
>+ },
>+ [PRCI_CLK_DDRPLL] = {
>+ .name = "ddrpll",
>+ .parent_name = "hfclk",
>+ .ops = &sifive_fu740_prci_wrpll_ro_clk_ops,
>+ .pwd = &__prci_ddrpll_data,
>+ },
>+ [PRCI_CLK_GEMGXLPLL] = {
>+ .name = "gemgxlpll",
>+ .parent_name = "hfclk",
>+ .ops = &sifive_fu740_prci_wrpll_clk_ops,
>+ .pwd = &__prci_gemgxlpll_data,
>+ },
>+ [PRCI_CLK_DVFSCOREPLL] = {
>+ .name = "dvfscorepll",
>+ .parent_name = "hfclk",
>+ .ops = &sifive_fu740_prci_wrpll_clk_ops,
>+ .pwd = &__prci_dvfscorepll_data,
>+ },
>+ [PRCI_CLK_HFPCLKPLL] = {
>+ .name = "hfpclkpll",
>+ .parent_name = "hfclk",
>+ .ops = &sifive_fu740_prci_wrpll_clk_ops,
>+ .pwd = &__prci_hfpclkpll_data,
>+ },
>+ [PRCI_CLK_CLTXPLL] = {
>+ .name = "cltxpll",
>+ .parent_name = "hfclk",
>+ .ops = &sifive_fu740_prci_wrpll_clk_ops,
>+ .pwd = &__prci_cltxpll_data,
>+ },
>+ [PRCI_CLK_TLCLK] = {
>+ .name = "tlclk",
>+ .parent_name = "corepll",
>+ .ops = &sifive_fu740_prci_tlclksel_clk_ops,
>+ },
>+ [PRCI_CLK_PCLK] = {
>+ .name = "pclk",
>+ .parent_name = "hfpclkpll",
>+ .ops = &sifive_fu740_prci_hfpclkplldiv_clk_ops,
>+ },
>+};
>diff --git a/drivers/clk/sifive/fu740-prci.h b/drivers/clk/sifive/fu740-prci.h new
>file mode 100644 index 000000000000..13ef971f7764
>--- /dev/null
>+++ b/drivers/clk/sifive/fu740-prci.h
>@@ -0,0 +1,21 @@
>+/* SPDX-License-Identifier: GPL-2.0 */
>+/*
>+ * Copyright (C) 2020 SiFive, Inc.
>+ * Zong Li
>+ */
>+
>+#ifndef __SIFIVE_CLK_FU740_PRCI_H
>+#define __SIFIVE_CLK_FU740_PRCI_H
>+
>+#include "sifive-prci.h"
>+
>+#define NUM_CLOCK_FU740 8
>+
>+extern struct __prci_clock __prci_init_clocks_fu740[NUM_CLOCK_FU740];
>+
>+static const struct prci_clk_desc prci_clk_fu740 = {
>+ .clks = __prci_init_clocks_fu740,
>+ .num_clks = ARRAY_SIZE(__prci_init_clocks_fu740),
>+};
>+
>+#endif /* __SIFIVE_CLK_FU740_PRCI_H */
>diff --git a/drivers/clk/sifive/sifive-prci.c b/drivers/clk/sifive/sifive-prci.c
>index 0ac729eeb71b..4098dbc5881a 100644
>--- a/drivers/clk/sifive/sifive-prci.c
>+++ b/drivers/clk/sifive/sifive-prci.c
>@@ -27,6 +27,7 @@
> #include <linux/of_device.h>
> #include "sifive-prci.h"
> #include "fu540-prci.h"
>+#include "fu740-prci.h"
>
> /*
> * Private functions
>@@ -242,6 +243,18 @@ unsigned long sifive_prci_tlclksel_recalc_rate(struct
>clk_hw *hw,
> return div_u64(parent_rate, div);
> }
>
>+/* HFPCLK clock integration */
>+
>+unsigned long sifive_prci_hfpclkplldiv_recalc_rate(struct clk_hw *hw,
>+ unsigned long parent_rate)
>+{
>+ struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
>+ struct __prci_data *pd = pc->pd;
>+ u32 div = __prci_readl(pd, PRCI_HFPCLKPLLDIV_OFFSET);
>+
>+ return div_u64(parent_rate, div + 2);
>+}
>+
> /*
> * Core clock mux control
> */
>@@ -287,6 +300,112 @@ void sifive_prci_coreclksel_use_corepll(struct
>__prci_data *pd)
> r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */
> }
>
>+/**
>+ * sifive_prci_coreclksel_use_final_corepll() - switch the CORECLK mux
>+to output
>+ * FINAL_COREPLL
>+ * @pd: struct __prci_data * for the PRCI containing the CORECLK mux
>+reg
>+ *
>+ * Switch the CORECLK mux to the final COREPLL output clock; return
>+once
>+ * complete.
>+ *
>+ * Context: Any context. Caller must prevent concurrent changes to the
>+ * PRCI_CORECLKSEL_OFFSET register.
>+ */
>+void sifive_prci_coreclksel_use_final_corepll(struct __prci_data *pd) {
>+ u32 r;
>+
>+ r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET);
>+ r &= ~PRCI_CORECLKSEL_CORECLKSEL_MASK;
>+ __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd);
>+
>+ r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */
>+}
>+
>+/**
>+ * sifive_prci_corepllsel_use_dvfscorepll() - switch the COREPLL mux to
>+ * output DVFS_COREPLL
>+ * @pd: struct __prci_data * for the PRCI containing the COREPLL mux
>+reg
>+ *
>+ * Switch the COREPLL mux to the DVFSCOREPLL output clock; return once
>complete.
>+ *
>+ * Context: Any context. Caller must prevent concurrent changes to the
>+ * PRCI_COREPLLSEL_OFFSET register.
>+ */
>+void sifive_prci_corepllsel_use_dvfscorepll(struct __prci_data *pd) {
>+ u32 r;
>+
>+ r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET);
>+ r |= PRCI_COREPLLSEL_COREPLLSEL_MASK;
>+ __prci_writel(r, PRCI_COREPLLSEL_OFFSET, pd);
>+
>+ r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET); /* barrier */
>+}
>+
>+/**
>+ * sifive_prci_corepllsel_use_corepll() - switch the COREPLL mux to
>+ * output COREPLL
>+ * @pd: struct __prci_data * for the PRCI containing the COREPLL mux
>+reg
>+ *
>+ * Switch the COREPLL mux to the COREPLL output clock; return once complete.
>+ *
>+ * Context: Any context. Caller must prevent concurrent changes to the
>+ * PRCI_COREPLLSEL_OFFSET register.
>+ */
>+void sifive_prci_corepllsel_use_corepll(struct __prci_data *pd) {
>+ u32 r;
>+
>+ r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET);
>+ r &= ~PRCI_COREPLLSEL_COREPLLSEL_MASK;
>+ __prci_writel(r, PRCI_COREPLLSEL_OFFSET, pd);
>+
>+ r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET); /* barrier */
>+}
>+
>+/**
>+ * sifive_prci_hfpclkpllsel_use_hfclk() - switch the HFPCLKPLL mux to
>+ * output HFCLK
>+ * @pd: struct __prci_data * for the PRCI containing the HFPCLKPLL mux
>+reg
>+ *
>+ * Switch the HFPCLKPLL mux to the HFCLK input source; return once complete.
>+ *
>+ * Context: Any context. Caller must prevent concurrent changes to the
>+ * PRCI_HFPCLKPLLSEL_OFFSET register.
>+ */
>+void sifive_prci_hfpclkpllsel_use_hfclk(struct __prci_data *pd) {
>+ u32 r;
>+
>+ r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET);
>+ r |= PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_MASK;
>+ __prci_writel(r, PRCI_HFPCLKPLLSEL_OFFSET, pd);
>+
>+ r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET); /* barrier */
>+}
>+
>+/**
>+ * sifive_prci_hfpclkpllsel_use_hfpclkpll() - switch the HFPCLKPLL mux
>+to
>+ * output HFPCLKPLL
>+ * @pd: struct __prci_data * for the PRCI containing the HFPCLKPLL mux
>+reg
>+ *
>+ * Switch the HFPCLKPLL mux to the HFPCLKPLL output clock; return once
>complete.
>+ *
>+ * Context: Any context. Caller must prevent concurrent changes to the
>+ * PRCI_HFPCLKPLLSEL_OFFSET register.
>+ */
>+void sifive_prci_hfpclkpllsel_use_hfpclkpll(struct __prci_data *pd) {
>+ u32 r;
>+
>+ r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET);
>+ r &= ~PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_MASK;
>+ __prci_writel(r, PRCI_HFPCLKPLLSEL_OFFSET, pd);
>+
>+ r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET); /* barrier */
>+}
>+
> /**
> * __prci_register_clocks() - register clock controls in the PRCI
> * @dev: Linux struct device *
>@@ -391,6 +510,7 @@ static int sifive_prci_probe(struct platform_device
>*pdev)
>
> static const struct of_device_id sifive_prci_of_match[] = {
> {.compatible = "sifive,fu540-c000-prci", .data = &prci_clk_fu540},
>+ {.compatible = "sifive,fu740-c000-prci", .data = &prci_clk_fu740},
> {}
> };
>
>diff --git a/drivers/clk/sifive/sifive-prci.h b/drivers/clk/sifive/sifive-prci.h
>index 025f717bc053..bc0646bc9c3e 100644
>--- a/drivers/clk/sifive/sifive-prci.h
>+++ b/drivers/clk/sifive/sifive-prci.h
>@@ -117,6 +117,87 @@
> #define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_MASK \
> (0x1 << PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT)
>
>+/* CLTXPLLCFG0 */
>+#define PRCI_CLTXPLLCFG0_OFFSET 0x30
>+#define PRCI_CLTXPLLCFG0_DIVR_SHIFT 0
>+#define PRCI_CLTXPLLCFG0_DIVR_MASK (0x3f <<
>PRCI_CLTXPLLCFG0_DIVR_SHIFT)
>+#define PRCI_CLTXPLLCFG0_DIVF_SHIFT 6
>+#define PRCI_CLTXPLLCFG0_DIVF_MASK (0x1ff <<
>PRCI_CLTXPLLCFG0_DIVF_SHIFT)
>+#define PRCI_CLTXPLLCFG0_DIVQ_SHIFT 15
>+#define PRCI_CLTXPLLCFG0_DIVQ_MASK (0x7 <<
>PRCI_CLTXPLLCFG0_DIVQ_SHIFT)
>+#define PRCI_CLTXPLLCFG0_RANGE_SHIFT 18
>+#define PRCI_CLTXPLLCFG0_RANGE_MASK (0x7 <<
>PRCI_CLTXPLLCFG0_RANGE_SHIFT)
>+#define PRCI_CLTXPLLCFG0_BYPASS_SHIFT 24
>+#define PRCI_CLTXPLLCFG0_BYPASS_MASK (0x1 <<
>PRCI_CLTXPLLCFG0_BYPASS_SHIFT)
>+#define PRCI_CLTXPLLCFG0_FSE_SHIFT 25
>+#define PRCI_CLTXPLLCFG0_FSE_MASK (0x1 <<
>PRCI_CLTXPLLCFG0_FSE_SHIFT)
>+#define PRCI_CLTXPLLCFG0_LOCK_SHIFT 31
>+#define PRCI_CLTXPLLCFG0_LOCK_MASK (0x1 <<
>PRCI_CLTXPLLCFG0_LOCK_SHIFT)
>+
>+/* CLTXPLLCFG1 */
>+#define PRCI_CLTXPLLCFG1_OFFSET 0x34
>+#define PRCI_CLTXPLLCFG1_CKE_SHIFT 24
This CFG1_CLK_SHIFT should be changed to 31.
>+#define PRCI_CLTXPLLCFG1_CKE_MASK (0x1 <<
>PRCI_CLTXPLLCFG1_CKE_SHIFT)
>+
>+/* DVFSCOREPLLCFG0 */
>+#define PRCI_DVFSCOREPLLCFG0_OFFSET 0x38
>+
>+/* DVFSCOREPLLCFG1 */
>+#define PRCI_DVFSCOREPLLCFG1_OFFSET 0x3c
>+#define PRCI_DVFSCOREPLLCFG1_CKE_SHIFT 24
Same here
>+#define PRCI_DVFSCOREPLLCFG1_CKE_MASK (0x1 <<
>PRCI_DVFSCOREPLLCFG1_CKE_SHIFT)
>+
>+/* COREPLLSEL */
>+#define PRCI_COREPLLSEL_OFFSET 0x40
>+#define PRCI_COREPLLSEL_COREPLLSEL_SHIFT 0
>+#define PRCI_COREPLLSEL_COREPLLSEL_MASK \
>+ (0x1 << PRCI_COREPLLSEL_COREPLLSEL_SHIFT)
>+
>+/* HFPCLKPLLCFG0 */
>+#define PRCI_HFPCLKPLLCFG0_OFFSET 0x50
>+#define PRCI_HFPCLKPLL_CFG0_DIVR_SHIFT 0
>+#define PRCI_HFPCLKPLL_CFG0_DIVR_MASK \
>+ (0x3f << PRCI_HFPCLKPLLCFG0_DIVR_SHIFT)
>+#define PRCI_HFPCLKPLL_CFG0_DIVF_SHIFT 6
>+#define PRCI_HFPCLKPLL_CFG0_DIVF_MASK \
>+ (0x1ff << PRCI_HFPCLKPLLCFG0_DIVF_SHIFT)
>+#define PRCI_HFPCLKPLL_CFG0_DIVQ_SHIFT 15
>+#define PRCI_HFPCLKPLL_CFG0_DIVQ_MASK \
>+ (0x7 << PRCI_HFPCLKPLLCFG0_DIVQ_SHIFT)
>+#define PRCI_HFPCLKPLL_CFG0_RANGE_SHIFT 18
>+#define PRCI_HFPCLKPLL_CFG0_RANGE_MASK \
>+ (0x7 << PRCI_HFPCLKPLLCFG0_RANGE_SHIFT)
>+#define PRCI_HFPCLKPLL_CFG0_BYPASS_SHIFT 24
>+#define PRCI_HFPCLKPLL_CFG0_BYPASS_MASK \
>+ (0x1 << PRCI_HFPCLKPLLCFG0_BYPASS_SHIFT)
>+#define PRCI_HFPCLKPLL_CFG0_FSE_SHIFT 25
>+#define PRCI_HFPCLKPLL_CFG0_FSE_MASK \
>+ (0x1 << PRCI_HFPCLKPLLCFG0_FSE_SHIFT)
>+#define PRCI_HFPCLKPLL_CFG0_LOCK_SHIFT 31
>+#define PRCI_HFPCLKPLL_CFG0_LOCK_MASK \
>+ (0x1 << PRCI_HFPCLKPLLCFG0_LOCK_SHIFT)
>+
>+/* HFPCLKPLLCFG1 */
>+#define PRCI_HFPCLKPLLCFG1_OFFSET 0x54
>+#define PRCI_HFPCLKPLLCFG1_CKE_SHIFT 24
Same here and I am not able to see your 1st patch in this series.
Thanks
Pragnesh
>+#define PRCI_HFPCLKPLLCFG1_CKE_MASK \
>+ (0x1 << PRCI_HFPCLKPLLCFG1_CKE_SHIFT)
>+
>+/* HFPCLKPLLSEL */
>+#define PRCI_HFPCLKPLLSEL_OFFSET 0x58
>+#define PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_SHIFT 0
>+#define PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_MASK \
>+ (0x1 << PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_SHIFT)
>+
>+/* HFPCLKPLLDIV */
>+#define PRCI_HFPCLKPLLDIV_OFFSET 0x5c
>+
>+/* PRCIPLL */
>+#define PRCI_PRCIPLL_OFFSET 0xe0
>+
>+/* PROCMONCFG */
>+#define PRCI_PROCMONCFG_OFFSET 0xf0
>+
> /*
> * Private structures
> */
>@@ -187,6 +268,11 @@ struct prci_clk_desc {
> /* Core clock mux control */
> void sifive_prci_coreclksel_use_hfclk(struct __prci_data *pd); void
>sifive_prci_coreclksel_use_corepll(struct __prci_data *pd);
>+void sifive_prci_coreclksel_use_final_corepll(struct __prci_data *pd);
>+void sifive_prci_corepllsel_use_dvfscorepll(struct __prci_data *pd);
>+void sifive_prci_corepllsel_use_corepll(struct __prci_data *pd); void
>+sifive_prci_hfpclkpllsel_use_hfclk(struct __prci_data *pd); void
>+sifive_prci_hfpclkpllsel_use_hfpclkpll(struct __prci_data *pd);
>
> /* Linux clock framework integration */ long sifive_prci_wrpll_round_rate(struct
>clk_hw *hw, unsigned long rate, @@ -197,5 +283,7 @@ unsigned long
>sifive_prci_wrpll_recalc_rate(struct clk_hw *hw,
> unsigned long parent_rate);
> unsigned long sifive_prci_tlclksel_recalc_rate(struct clk_hw *hw,
> unsigned long parent_rate);
>+unsigned long sifive_prci_hfpclkplldiv_recalc_rate(struct clk_hw *hw,
>+ unsigned long parent_rate);
>
> #endif /* __SIFIVE_CLK_SIFIVE_PRCI_H */ diff --git a/include/dt-
>bindings/clock/sifive-fu740-prci.h b/include/dt-bindings/clock/sifive-fu740-prci.h
>new file mode 100644
>index 000000000000..cd7706ea5677
>--- /dev/null
>+++ b/include/dt-bindings/clock/sifive-fu740-prci.h
>@@ -0,0 +1,23 @@
>+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
>+/*
>+ * Copyright (C) 2019 SiFive, Inc.
>+ * Wesley Terpstra
>+ * Paul Walmsley
>+ * Zong Li
>+ */
>+
>+#ifndef __DT_BINDINGS_CLOCK_SIFIVE_FU740_PRCI_H
>+#define __DT_BINDINGS_CLOCK_SIFIVE_FU740_PRCI_H
>+
>+/* Clock indexes for use by Device Tree data and the PRCI driver */
>+
>+#define PRCI_CLK_COREPLL 0
>+#define PRCI_CLK_DDRPLL 1
>+#define PRCI_CLK_GEMGXLPLL 2
>+#define PRCI_CLK_DVFSCOREPLL 3
>+#define PRCI_CLK_HFPCLKPLL 4
>+#define PRCI_CLK_CLTXPLL 5
>+#define PRCI_CLK_TLCLK 6
>+#define PRCI_CLK_PCLK 7
>+
>+#endif /* __DT_BINDINGS_CLOCK_SIFIVE_FU740_PRCI_H */
>--
>2.29.2
>
>
>_______________________________________________
>linux-riscv mailing list
>[email protected]
>http://lists.infradead.org/mailman/listinfo/linux-riscv
>-----Original Message-----
>From: linux-riscv <[email protected]> On Behalf Of Zong Li
>Sent: 10 November 2020 12:58
>To: Paul Walmsley ( Sifive) <[email protected]>; [email protected];
>[email protected]; [email protected]; [email protected];
>[email protected]; Yash Shah <[email protected]>; linux-
>[email protected]; [email protected]; linux-
>[email protected]
>Cc: Palmer Dabbelt <[email protected]>; Zong Li <[email protected]>
>Subject: [PATCH v2 2/3] clk: sifive: Use common name for prci configuration
>
>Use generic name CLK_SIFIVE_PRCI instead of CLK_SIFIVE_FU540_PRCI. This
>patch is prepared for fu740 support.
>
>Signed-off-by: Zong Li <[email protected]>
>Reviewed-by: Palmer Dabbelt <[email protected]>
>Acked-by: Palmer Dabbelt <[email protected]>
>---
> arch/riscv/Kconfig.socs | 2 +-
> drivers/clk/sifive/Kconfig | 6 +++---
> drivers/clk/sifive/Makefile | 2 +-
> 3 files changed, 5 insertions(+), 5 deletions(-)
Reviewed-by: Pragnesh Patel <[email protected]>
On Wed, Nov 11, 2020 at 1:47 PM Pragnesh Patel
<[email protected]> wrote:
>
> Hi Zong,
>
> >-----Original Message-----
> >From: linux-riscv <[email protected]> On Behalf Of Zong Li
> >Sent: 10 November 2020 12:58
> >To: Paul Walmsley ( Sifive) <[email protected]>; [email protected];
> >[email protected]; [email protected]; [email protected];
> >[email protected]; Yash Shah <[email protected]>; linux-
> >[email protected]; [email protected]; linux-
> >[email protected]
> >Cc: Erik Danie <[email protected]>; Henry Styles ( Sifive) <[email protected]>;
> >Zong Li <[email protected]>
> >Subject: [PATCH v2 3/3] clk: sifive: Add a driver for the SiFive FU740 PRCI IP
> >block
> >
> >Add driver code for the SiFive FU740 PRCI IP block. This IP block handles reset
> >and clock control for the SiFive FU740 device and implements SoC-level clock
> >tree controls and dividers.
> >
> >This driver contains bug fixes and contributions from Henry Styles
> ><[email protected]> and Erik Danie <[email protected]>.
> >
> >Signed-off-by: Zong Li <[email protected]>
> >Cc: Henry Styles <[email protected]>
> >Cc: Erik Danie <[email protected]>
> >---
> > drivers/clk/sifive/Kconfig | 4 +-
> > drivers/clk/sifive/Makefile | 1 +
> > drivers/clk/sifive/fu740-prci.c | 122 ++++++++++++++++++
> > drivers/clk/sifive/fu740-prci.h | 21 +++
> > drivers/clk/sifive/sifive-prci.c | 120 +++++++++++++++++
> > drivers/clk/sifive/sifive-prci.h | 88 +++++++++++++
> > include/dt-bindings/clock/sifive-fu740-prci.h | 23 ++++
> > 7 files changed, 377 insertions(+), 2 deletions(-) create mode 100644
> >drivers/clk/sifive/fu740-prci.c create mode 100644 drivers/clk/sifive/fu740-
> >prci.h create mode 100644 include/dt-bindings/clock/sifive-fu740-prci.h
> >
> >diff --git a/drivers/clk/sifive/Kconfig b/drivers/clk/sifive/Kconfig index
> >ab48cf7e0105..1c14eb20c066 100644
> >--- a/drivers/clk/sifive/Kconfig
> >+++ b/drivers/clk/sifive/Kconfig
> >@@ -13,7 +13,7 @@ config CLK_SIFIVE_PRCI
> > select CLK_ANALOGBITS_WRPLL_CLN28HPC
> > help
> > Supports the Power Reset Clock interface (PRCI) IP block found in
> >- FU540 SoCs. If this kernel is meant to run on a SiFive FU540 SoC,
> >- enable this driver.
> >+ FU540/FU740 SoCs. If this kernel is meant to run on a SiFive FU540/
> >+ FU740 SoCs, enable this driver.
> >
> > endif
> >diff --git a/drivers/clk/sifive/Makefile b/drivers/clk/sifive/Makefile index
> >fe3e2cb4c4d8..2c05798e4ba4 100644
> >--- a/drivers/clk/sifive/Makefile
> >+++ b/drivers/clk/sifive/Makefile
> >@@ -2,3 +2,4 @@
> > obj-y += sifive-prci.o
> >
> > obj-$(CONFIG_CLK_SIFIVE_PRCI) += fu540-prci.o
> >+obj-$(CONFIG_CLK_SIFIVE_PRCI) += fu740-prci.o
> >diff --git a/drivers/clk/sifive/fu740-prci.c b/drivers/clk/sifive/fu740-prci.c new file
> >mode 100644 index 000000000000..3b87e273c3eb
> >--- /dev/null
> >+++ b/drivers/clk/sifive/fu740-prci.c
> >@@ -0,0 +1,122 @@
> >+// SPDX-License-Identifier: GPL-2.0
> >+/*
> >+ * Copyright (C) 2018-2019 SiFive, Inc.
> >+ * Wesley Terpstra
> >+ * Paul Walmsley
> >+ * Zong Li
> >+ *
> >+ * This program is free software; you can redistribute it and/or modify
> >+ * it under the terms of the GNU General Public License version 2 as
> >+ * published by the Free Software Foundation.
> >+ *
> >+ * This program is distributed in the hope that it will be useful,
> >+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
> >+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> >+ * GNU General Public License for more details.
> >+ */
> >+
> >+#include <dt-bindings/clock/sifive-fu740-prci.h>
> >+#include <linux/module.h>
> >+#include "sifive-prci.h"
> >+
> >+/* PRCI integration data for each WRPLL instance */
> >+
> >+static struct __prci_wrpll_data __prci_corepll_data = {
> >+ .cfg0_offs = PRCI_COREPLLCFG0_OFFSET,
> >+ .enable_bypass = sifive_prci_coreclksel_use_hfclk,
> >+ .disable_bypass = sifive_prci_coreclksel_use_final_corepll,
> >+};
> >+
> >+static struct __prci_wrpll_data __prci_ddrpll_data = {
> >+ .cfg0_offs = PRCI_DDRPLLCFG0_OFFSET,
> >+};
> >+
> >+static struct __prci_wrpll_data __prci_gemgxlpll_data = {
> >+ .cfg0_offs = PRCI_GEMGXLPLLCFG0_OFFSET, };
> >+
> >+static struct __prci_wrpll_data __prci_dvfscorepll_data = {
> >+ .cfg0_offs = PRCI_DVFSCOREPLLCFG0_OFFSET,
> >+ .enable_bypass = sifive_prci_corepllsel_use_corepll,
> >+ .disable_bypass = sifive_prci_corepllsel_use_dvfscorepll,
> >+};
> >+
> >+static struct __prci_wrpll_data __prci_hfpclkpll_data = {
> >+ .cfg0_offs = PRCI_HFPCLKPLLCFG0_OFFSET,
> >+ .enable_bypass = sifive_prci_hfpclkpllsel_use_hfclk,
> >+ .disable_bypass = sifive_prci_hfpclkpllsel_use_hfpclkpll,
> >+};
> >+
> >+static struct __prci_wrpll_data __prci_cltxpll_data = {
> >+ .cfg0_offs = PRCI_CLTXPLLCFG0_OFFSET,
> >+};
> >+
> >+/* Linux clock framework integration */
> >+
> >+static const struct clk_ops sifive_fu740_prci_wrpll_clk_ops = {
> >+ .set_rate = sifive_prci_wrpll_set_rate,
> >+ .round_rate = sifive_prci_wrpll_round_rate,
> >+ .recalc_rate = sifive_prci_wrpll_recalc_rate, };
> >+
> >+static const struct clk_ops sifive_fu740_prci_wrpll_ro_clk_ops = {
> >+ .recalc_rate = sifive_prci_wrpll_recalc_rate, };
> >+
> >+static const struct clk_ops sifive_fu740_prci_tlclksel_clk_ops = {
> >+ .recalc_rate = sifive_prci_tlclksel_recalc_rate, };
> >+
> >+static const struct clk_ops sifive_fu740_prci_hfpclkplldiv_clk_ops = {
> >+ .recalc_rate = sifive_prci_hfpclkplldiv_recalc_rate,
> >+};
> >+
> >+/* List of clock controls provided by the PRCI */ struct __prci_clock
> >+__prci_init_clocks_fu740[] = {
> >+ [PRCI_CLK_COREPLL] = {
> >+ .name = "corepll",
> >+ .parent_name = "hfclk",
> >+ .ops = &sifive_fu740_prci_wrpll_clk_ops,
> >+ .pwd = &__prci_corepll_data,
> >+ },
> >+ [PRCI_CLK_DDRPLL] = {
> >+ .name = "ddrpll",
> >+ .parent_name = "hfclk",
> >+ .ops = &sifive_fu740_prci_wrpll_ro_clk_ops,
> >+ .pwd = &__prci_ddrpll_data,
> >+ },
> >+ [PRCI_CLK_GEMGXLPLL] = {
> >+ .name = "gemgxlpll",
> >+ .parent_name = "hfclk",
> >+ .ops = &sifive_fu740_prci_wrpll_clk_ops,
> >+ .pwd = &__prci_gemgxlpll_data,
> >+ },
> >+ [PRCI_CLK_DVFSCOREPLL] = {
> >+ .name = "dvfscorepll",
> >+ .parent_name = "hfclk",
> >+ .ops = &sifive_fu740_prci_wrpll_clk_ops,
> >+ .pwd = &__prci_dvfscorepll_data,
> >+ },
> >+ [PRCI_CLK_HFPCLKPLL] = {
> >+ .name = "hfpclkpll",
> >+ .parent_name = "hfclk",
> >+ .ops = &sifive_fu740_prci_wrpll_clk_ops,
> >+ .pwd = &__prci_hfpclkpll_data,
> >+ },
> >+ [PRCI_CLK_CLTXPLL] = {
> >+ .name = "cltxpll",
> >+ .parent_name = "hfclk",
> >+ .ops = &sifive_fu740_prci_wrpll_clk_ops,
> >+ .pwd = &__prci_cltxpll_data,
> >+ },
> >+ [PRCI_CLK_TLCLK] = {
> >+ .name = "tlclk",
> >+ .parent_name = "corepll",
> >+ .ops = &sifive_fu740_prci_tlclksel_clk_ops,
> >+ },
> >+ [PRCI_CLK_PCLK] = {
> >+ .name = "pclk",
> >+ .parent_name = "hfpclkpll",
> >+ .ops = &sifive_fu740_prci_hfpclkplldiv_clk_ops,
> >+ },
> >+};
> >diff --git a/drivers/clk/sifive/fu740-prci.h b/drivers/clk/sifive/fu740-prci.h new
> >file mode 100644 index 000000000000..13ef971f7764
> >--- /dev/null
> >+++ b/drivers/clk/sifive/fu740-prci.h
> >@@ -0,0 +1,21 @@
> >+/* SPDX-License-Identifier: GPL-2.0 */
> >+/*
> >+ * Copyright (C) 2020 SiFive, Inc.
> >+ * Zong Li
> >+ */
> >+
> >+#ifndef __SIFIVE_CLK_FU740_PRCI_H
> >+#define __SIFIVE_CLK_FU740_PRCI_H
> >+
> >+#include "sifive-prci.h"
> >+
> >+#define NUM_CLOCK_FU740 8
> >+
> >+extern struct __prci_clock __prci_init_clocks_fu740[NUM_CLOCK_FU740];
> >+
> >+static const struct prci_clk_desc prci_clk_fu740 = {
> >+ .clks = __prci_init_clocks_fu740,
> >+ .num_clks = ARRAY_SIZE(__prci_init_clocks_fu740),
> >+};
> >+
> >+#endif /* __SIFIVE_CLK_FU740_PRCI_H */
> >diff --git a/drivers/clk/sifive/sifive-prci.c b/drivers/clk/sifive/sifive-prci.c
> >index 0ac729eeb71b..4098dbc5881a 100644
> >--- a/drivers/clk/sifive/sifive-prci.c
> >+++ b/drivers/clk/sifive/sifive-prci.c
> >@@ -27,6 +27,7 @@
> > #include <linux/of_device.h>
> > #include "sifive-prci.h"
> > #include "fu540-prci.h"
> >+#include "fu740-prci.h"
> >
> > /*
> > * Private functions
> >@@ -242,6 +243,18 @@ unsigned long sifive_prci_tlclksel_recalc_rate(struct
> >clk_hw *hw,
> > return div_u64(parent_rate, div);
> > }
> >
> >+/* HFPCLK clock integration */
> >+
> >+unsigned long sifive_prci_hfpclkplldiv_recalc_rate(struct clk_hw *hw,
> >+ unsigned long parent_rate)
> >+{
> >+ struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
> >+ struct __prci_data *pd = pc->pd;
> >+ u32 div = __prci_readl(pd, PRCI_HFPCLKPLLDIV_OFFSET);
> >+
> >+ return div_u64(parent_rate, div + 2);
> >+}
> >+
> > /*
> > * Core clock mux control
> > */
> >@@ -287,6 +300,112 @@ void sifive_prci_coreclksel_use_corepll(struct
> >__prci_data *pd)
> > r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */
> > }
> >
> >+/**
> >+ * sifive_prci_coreclksel_use_final_corepll() - switch the CORECLK mux
> >+to output
> >+ * FINAL_COREPLL
> >+ * @pd: struct __prci_data * for the PRCI containing the CORECLK mux
> >+reg
> >+ *
> >+ * Switch the CORECLK mux to the final COREPLL output clock; return
> >+once
> >+ * complete.
> >+ *
> >+ * Context: Any context. Caller must prevent concurrent changes to the
> >+ * PRCI_CORECLKSEL_OFFSET register.
> >+ */
> >+void sifive_prci_coreclksel_use_final_corepll(struct __prci_data *pd) {
> >+ u32 r;
> >+
> >+ r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET);
> >+ r &= ~PRCI_CORECLKSEL_CORECLKSEL_MASK;
> >+ __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd);
> >+
> >+ r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */
> >+}
> >+
> >+/**
> >+ * sifive_prci_corepllsel_use_dvfscorepll() - switch the COREPLL mux to
> >+ * output DVFS_COREPLL
> >+ * @pd: struct __prci_data * for the PRCI containing the COREPLL mux
> >+reg
> >+ *
> >+ * Switch the COREPLL mux to the DVFSCOREPLL output clock; return once
> >complete.
> >+ *
> >+ * Context: Any context. Caller must prevent concurrent changes to the
> >+ * PRCI_COREPLLSEL_OFFSET register.
> >+ */
> >+void sifive_prci_corepllsel_use_dvfscorepll(struct __prci_data *pd) {
> >+ u32 r;
> >+
> >+ r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET);
> >+ r |= PRCI_COREPLLSEL_COREPLLSEL_MASK;
> >+ __prci_writel(r, PRCI_COREPLLSEL_OFFSET, pd);
> >+
> >+ r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET); /* barrier */
> >+}
> >+
> >+/**
> >+ * sifive_prci_corepllsel_use_corepll() - switch the COREPLL mux to
> >+ * output COREPLL
> >+ * @pd: struct __prci_data * for the PRCI containing the COREPLL mux
> >+reg
> >+ *
> >+ * Switch the COREPLL mux to the COREPLL output clock; return once complete.
> >+ *
> >+ * Context: Any context. Caller must prevent concurrent changes to the
> >+ * PRCI_COREPLLSEL_OFFSET register.
> >+ */
> >+void sifive_prci_corepllsel_use_corepll(struct __prci_data *pd) {
> >+ u32 r;
> >+
> >+ r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET);
> >+ r &= ~PRCI_COREPLLSEL_COREPLLSEL_MASK;
> >+ __prci_writel(r, PRCI_COREPLLSEL_OFFSET, pd);
> >+
> >+ r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET); /* barrier */
> >+}
> >+
> >+/**
> >+ * sifive_prci_hfpclkpllsel_use_hfclk() - switch the HFPCLKPLL mux to
> >+ * output HFCLK
> >+ * @pd: struct __prci_data * for the PRCI containing the HFPCLKPLL mux
> >+reg
> >+ *
> >+ * Switch the HFPCLKPLL mux to the HFCLK input source; return once complete.
> >+ *
> >+ * Context: Any context. Caller must prevent concurrent changes to the
> >+ * PRCI_HFPCLKPLLSEL_OFFSET register.
> >+ */
> >+void sifive_prci_hfpclkpllsel_use_hfclk(struct __prci_data *pd) {
> >+ u32 r;
> >+
> >+ r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET);
> >+ r |= PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_MASK;
> >+ __prci_writel(r, PRCI_HFPCLKPLLSEL_OFFSET, pd);
> >+
> >+ r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET); /* barrier */
> >+}
> >+
> >+/**
> >+ * sifive_prci_hfpclkpllsel_use_hfpclkpll() - switch the HFPCLKPLL mux
> >+to
> >+ * output HFPCLKPLL
> >+ * @pd: struct __prci_data * for the PRCI containing the HFPCLKPLL mux
> >+reg
> >+ *
> >+ * Switch the HFPCLKPLL mux to the HFPCLKPLL output clock; return once
> >complete.
> >+ *
> >+ * Context: Any context. Caller must prevent concurrent changes to the
> >+ * PRCI_HFPCLKPLLSEL_OFFSET register.
> >+ */
> >+void sifive_prci_hfpclkpllsel_use_hfpclkpll(struct __prci_data *pd) {
> >+ u32 r;
> >+
> >+ r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET);
> >+ r &= ~PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_MASK;
> >+ __prci_writel(r, PRCI_HFPCLKPLLSEL_OFFSET, pd);
> >+
> >+ r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET); /* barrier */
> >+}
> >+
> > /**
> > * __prci_register_clocks() - register clock controls in the PRCI
> > * @dev: Linux struct device *
> >@@ -391,6 +510,7 @@ static int sifive_prci_probe(struct platform_device
> >*pdev)
> >
> > static const struct of_device_id sifive_prci_of_match[] = {
> > {.compatible = "sifive,fu540-c000-prci", .data = &prci_clk_fu540},
> >+ {.compatible = "sifive,fu740-c000-prci", .data = &prci_clk_fu740},
> > {}
> > };
> >
> >diff --git a/drivers/clk/sifive/sifive-prci.h b/drivers/clk/sifive/sifive-prci.h
> >index 025f717bc053..bc0646bc9c3e 100644
> >--- a/drivers/clk/sifive/sifive-prci.h
> >+++ b/drivers/clk/sifive/sifive-prci.h
> >@@ -117,6 +117,87 @@
> > #define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_MASK \
> > (0x1 << PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT)
> >
> >+/* CLTXPLLCFG0 */
> >+#define PRCI_CLTXPLLCFG0_OFFSET 0x30
> >+#define PRCI_CLTXPLLCFG0_DIVR_SHIFT 0
> >+#define PRCI_CLTXPLLCFG0_DIVR_MASK (0x3f <<
> >PRCI_CLTXPLLCFG0_DIVR_SHIFT)
> >+#define PRCI_CLTXPLLCFG0_DIVF_SHIFT 6
> >+#define PRCI_CLTXPLLCFG0_DIVF_MASK (0x1ff <<
> >PRCI_CLTXPLLCFG0_DIVF_SHIFT)
> >+#define PRCI_CLTXPLLCFG0_DIVQ_SHIFT 15
> >+#define PRCI_CLTXPLLCFG0_DIVQ_MASK (0x7 <<
> >PRCI_CLTXPLLCFG0_DIVQ_SHIFT)
> >+#define PRCI_CLTXPLLCFG0_RANGE_SHIFT 18
> >+#define PRCI_CLTXPLLCFG0_RANGE_MASK (0x7 <<
> >PRCI_CLTXPLLCFG0_RANGE_SHIFT)
> >+#define PRCI_CLTXPLLCFG0_BYPASS_SHIFT 24
> >+#define PRCI_CLTXPLLCFG0_BYPASS_MASK (0x1 <<
> >PRCI_CLTXPLLCFG0_BYPASS_SHIFT)
> >+#define PRCI_CLTXPLLCFG0_FSE_SHIFT 25
> >+#define PRCI_CLTXPLLCFG0_FSE_MASK (0x1 <<
> >PRCI_CLTXPLLCFG0_FSE_SHIFT)
> >+#define PRCI_CLTXPLLCFG0_LOCK_SHIFT 31
> >+#define PRCI_CLTXPLLCFG0_LOCK_MASK (0x1 <<
> >PRCI_CLTXPLLCFG0_LOCK_SHIFT)
> >+
> >+/* CLTXPLLCFG1 */
> >+#define PRCI_CLTXPLLCFG1_OFFSET 0x34
> >+#define PRCI_CLTXPLLCFG1_CKE_SHIFT 24
>
> This CFG1_CLK_SHIFT should be changed to 31.
>
> >+#define PRCI_CLTXPLLCFG1_CKE_MASK (0x1 <<
> >PRCI_CLTXPLLCFG1_CKE_SHIFT)
> >+
> >+/* DVFSCOREPLLCFG0 */
> >+#define PRCI_DVFSCOREPLLCFG0_OFFSET 0x38
> >+
> >+/* DVFSCOREPLLCFG1 */
> >+#define PRCI_DVFSCOREPLLCFG1_OFFSET 0x3c
> >+#define PRCI_DVFSCOREPLLCFG1_CKE_SHIFT 24
>
> Same here
>
> >+#define PRCI_DVFSCOREPLLCFG1_CKE_MASK (0x1 <<
> >PRCI_DVFSCOREPLLCFG1_CKE_SHIFT)
> >+
> >+/* COREPLLSEL */
> >+#define PRCI_COREPLLSEL_OFFSET 0x40
> >+#define PRCI_COREPLLSEL_COREPLLSEL_SHIFT 0
> >+#define PRCI_COREPLLSEL_COREPLLSEL_MASK \
> >+ (0x1 << PRCI_COREPLLSEL_COREPLLSEL_SHIFT)
> >+
> >+/* HFPCLKPLLCFG0 */
> >+#define PRCI_HFPCLKPLLCFG0_OFFSET 0x50
> >+#define PRCI_HFPCLKPLL_CFG0_DIVR_SHIFT 0
> >+#define PRCI_HFPCLKPLL_CFG0_DIVR_MASK \
> >+ (0x3f << PRCI_HFPCLKPLLCFG0_DIVR_SHIFT)
> >+#define PRCI_HFPCLKPLL_CFG0_DIVF_SHIFT 6
> >+#define PRCI_HFPCLKPLL_CFG0_DIVF_MASK \
> >+ (0x1ff << PRCI_HFPCLKPLLCFG0_DIVF_SHIFT)
> >+#define PRCI_HFPCLKPLL_CFG0_DIVQ_SHIFT 15
> >+#define PRCI_HFPCLKPLL_CFG0_DIVQ_MASK \
> >+ (0x7 << PRCI_HFPCLKPLLCFG0_DIVQ_SHIFT)
> >+#define PRCI_HFPCLKPLL_CFG0_RANGE_SHIFT 18
> >+#define PRCI_HFPCLKPLL_CFG0_RANGE_MASK \
> >+ (0x7 << PRCI_HFPCLKPLLCFG0_RANGE_SHIFT)
> >+#define PRCI_HFPCLKPLL_CFG0_BYPASS_SHIFT 24
> >+#define PRCI_HFPCLKPLL_CFG0_BYPASS_MASK \
> >+ (0x1 << PRCI_HFPCLKPLLCFG0_BYPASS_SHIFT)
> >+#define PRCI_HFPCLKPLL_CFG0_FSE_SHIFT 25
> >+#define PRCI_HFPCLKPLL_CFG0_FSE_MASK \
> >+ (0x1 << PRCI_HFPCLKPLLCFG0_FSE_SHIFT)
> >+#define PRCI_HFPCLKPLL_CFG0_LOCK_SHIFT 31
> >+#define PRCI_HFPCLKPLL_CFG0_LOCK_MASK \
> >+ (0x1 << PRCI_HFPCLKPLLCFG0_LOCK_SHIFT)
> >+
> >+/* HFPCLKPLLCFG1 */
> >+#define PRCI_HFPCLKPLLCFG1_OFFSET 0x54
> >+#define PRCI_HFPCLKPLLCFG1_CKE_SHIFT 24
>
> Same here and I am not able to see your 1st patch in this series.
>
Many thanks to point out that. Fortunately, we don't use these bits in
Linux's driver, we just access them in first stage bootloader, I would
fix it in next version. Thanks for your review.
> Thanks
> Pragnesh
>
> >+#define PRCI_HFPCLKPLLCFG1_CKE_MASK \
> >+ (0x1 << PRCI_HFPCLKPLLCFG1_CKE_SHIFT)
> >+
> >+/* HFPCLKPLLSEL */
> >+#define PRCI_HFPCLKPLLSEL_OFFSET 0x58
> >+#define PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_SHIFT 0
> >+#define PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_MASK \
> >+ (0x1 << PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_SHIFT)
> >+
> >+/* HFPCLKPLLDIV */
> >+#define PRCI_HFPCLKPLLDIV_OFFSET 0x5c
> >+
> >+/* PRCIPLL */
> >+#define PRCI_PRCIPLL_OFFSET 0xe0
> >+
> >+/* PROCMONCFG */
> >+#define PRCI_PROCMONCFG_OFFSET 0xf0
> >+
> > /*
> > * Private structures
> > */
> >@@ -187,6 +268,11 @@ struct prci_clk_desc {
> > /* Core clock mux control */
> > void sifive_prci_coreclksel_use_hfclk(struct __prci_data *pd); void
> >sifive_prci_coreclksel_use_corepll(struct __prci_data *pd);
> >+void sifive_prci_coreclksel_use_final_corepll(struct __prci_data *pd);
> >+void sifive_prci_corepllsel_use_dvfscorepll(struct __prci_data *pd);
> >+void sifive_prci_corepllsel_use_corepll(struct __prci_data *pd); void
> >+sifive_prci_hfpclkpllsel_use_hfclk(struct __prci_data *pd); void
> >+sifive_prci_hfpclkpllsel_use_hfpclkpll(struct __prci_data *pd);
> >
> > /* Linux clock framework integration */ long sifive_prci_wrpll_round_rate(struct
> >clk_hw *hw, unsigned long rate, @@ -197,5 +283,7 @@ unsigned long
> >sifive_prci_wrpll_recalc_rate(struct clk_hw *hw,
> > unsigned long parent_rate);
> > unsigned long sifive_prci_tlclksel_recalc_rate(struct clk_hw *hw,
> > unsigned long parent_rate);
> >+unsigned long sifive_prci_hfpclkplldiv_recalc_rate(struct clk_hw *hw,
> >+ unsigned long parent_rate);
> >
> > #endif /* __SIFIVE_CLK_SIFIVE_PRCI_H */ diff --git a/include/dt-
> >bindings/clock/sifive-fu740-prci.h b/include/dt-bindings/clock/sifive-fu740-prci.h
> >new file mode 100644
> >index 000000000000..cd7706ea5677
> >--- /dev/null
> >+++ b/include/dt-bindings/clock/sifive-fu740-prci.h
> >@@ -0,0 +1,23 @@
> >+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
> >+/*
> >+ * Copyright (C) 2019 SiFive, Inc.
> >+ * Wesley Terpstra
> >+ * Paul Walmsley
> >+ * Zong Li
> >+ */
> >+
> >+#ifndef __DT_BINDINGS_CLOCK_SIFIVE_FU740_PRCI_H
> >+#define __DT_BINDINGS_CLOCK_SIFIVE_FU740_PRCI_H
> >+
> >+/* Clock indexes for use by Device Tree data and the PRCI driver */
> >+
> >+#define PRCI_CLK_COREPLL 0
> >+#define PRCI_CLK_DDRPLL 1
> >+#define PRCI_CLK_GEMGXLPLL 2
> >+#define PRCI_CLK_DVFSCOREPLL 3
> >+#define PRCI_CLK_HFPCLKPLL 4
> >+#define PRCI_CLK_CLTXPLL 5
> >+#define PRCI_CLK_TLCLK 6
> >+#define PRCI_CLK_PCLK 7
> >+
> >+#endif /* __DT_BINDINGS_CLOCK_SIFIVE_FU740_PRCI_H */
> >--
> >2.29.2
> >
> >
> >_______________________________________________
> >linux-riscv mailing list
> >[email protected]
> >http://lists.infradead.org/mailman/listinfo/linux-riscv