Just feedback for the true kernel gods:
I've announced it probably all to often.
But 2.6.1[34]* kernels aren't stable for me.
Where 2.6.12-mm1 stays up for >> 3 weeks the latest kernels barfs:
reboot system boot 2.6.14-rc2-git5 Mon Sep 26 16:58 (05:44)
[crash]
reboot system boot 2.6.14-rc2-git3 Sat Sep 24 05:14 (2+11:42)
[crash]
Danny
machine has serial port but no buffering so no error report :-(
On Mon, 26 Sep 2005, Danny ter Haar wrote:
>
> I've announced it probably all to often.
> But 2.6.1[34]* kernels aren't stable for me.
> Where 2.6.12-mm1 stays up for >> 3 weeks the latest kernels barfs:
Really need to narrow this down a lot more. Either a oops from a serial
port, or pinpointing where it started happening.
Linus
Linus Torvalds <[email protected]> wrote:
>Really need to narrow this down a lot more. Either a oops from a serial
>port, or pinpointing where it started happening.
compiled, installed,rebooted git6
just before crash (snapshot taken every minute & logged)
-------------
Linux 2.6.14-rc2-git6 (root@newsgate) (gcc 4.0.2 ) #1 1CPU [newsgate.(none)]
Memory: Total Used Free Shared Buffers
Mem: 4062040 4034532 27508 0 612
Swap: 0 0 0
Bootup: Tue Sep 27 00:02:39 2005 Load average: 4.13 4.06 4.17 1/77 29517
user : 0:30:23.86 12.2% page in : 0
nice : 0:04:43.51 1.9% page out: 0
system: 1:29:08.64 35.7% swap in : 0
idle : 0:01:24.38 0.6% swap out: 0
uptime: 4:09:21.98 context : 45465958
irq 0: 3736032 timer irq 12: 3
irq 1: 8 i8042 irq 16: 4519576 aic79xx
irq 4: 449 serial irq 17: 34901765 aic79xx, eth3
irq 9: 0 acpi irq 18: 89100231 acenic
--------------
gate:~# scsi1:0:5:0: Attempting to queue an ABORT message:CDB: 0x2a 0x0 0x4 0x8a 0xa5 0x51 0x0 0x0 0x1 0x0
scsi1: At time of recovery, card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi1: Dumping Card State at program address 0x21 Mode 0x33
Card was paused
HS_MAILBOX[0x0] INTCTL[0xc0]:(SWTMINTEN|SWTMINTMASK)
SEQINTSTAT[0x10]:(SEQ_SWTMRTO) SAVED_MODE[0x11]
DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0]
SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0]
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0]
SSTAT1[0x8]:(BUSFREE) SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
LQOSTAT1[0x0] LQOSTAT2[0xe1]:(LQOSTOP0|LQOPKT)
SCB Count = 128 CMDS_PENDING = 32 LASTSCB 0x13 CURRSCB 0x77 NEXTSCB 0xff80
qinstart = 47539 qinfifonext = 47539
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
122 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x57]
91 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x57]
35 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x57]
37 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x57]
108 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x57]
50 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x57]
121 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x57]
5 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x57]
16 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x57]
86 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x57]
105 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x57]
117 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x57]
83 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x57]
70 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x57]
63 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x57]
87 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x57]
53 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x57]
103 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x57]
41 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x57]
97 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x57]
95 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x57]
57 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x57]
80 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x57]
72 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x57]
46 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x57]
66 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x57]
94 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x57]
81 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x57]
73 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x57]
96 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x57]
17 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x57]
109 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x57]
Total 32
Kernel Free SCB list: 119 19 82 124 123 77 68 39 51 24 15 48 78 74 43 2 31 65 9 99 23 7 93 32 88 14 112 55 34 101 100 62 10 30 79 92 85 8 115 89 45 38 106 104 111 12 113 71 90 20 116 22 42 107 126 0 75 54 3 127 76 33 1 59 56 84 27 26 6 47 52 36 44 61 29 60 58 102 11 49 120
25 21 40 69 98 118 13 4 67 125 110 64 114 28 18
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
scsi1: FIFO0 Free, LONGJMP == 0x823a, SCB 0x77
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
scsi1: FIFO1 Free, LONGJMP == 0x823a, SCB 0x18
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
Press any key to continue._SEG) SG_STATE[0x0] DFFSXF
More info @ http://newsgate.newsserver.nl/kernel/
Should i open a ticker in bugzilla ?
I did so for prior kernels but no response.
Just for the record than ? ;-)
Danny