Hi,
I have a problem with a machine hard-hanging when I run, e.g,
'apt-cache search ...'. (Other apt commands hang it too).
The machine is:
AMD Athlon 800MHz machine,
Asus K7M (AMD-751 Irongate + Via VT82C686)
ECC RAM,
2 Sil3112A SATA controllers, 3 Seagate SATA disks.
It had been running for 300 days+ when there was a power outage.
After the outage, a case fan had died and a hard disk had developed
bad blocks (it was kicked from RAID array - Linux RAID). The fan was
replaced. The disk was left in the machine in order to scrub it
before RMA. The machine unfortunately now hard-hangs consistently.
Memtest86+ was run for over 18 hours (completing 18 passes) without
any failures reported. So it possibly is not RAM related.
If I run 'strace apt-get search ...' from the console in single-user
mode the last line it prints out is always the same, something like:
mmap2(NULL, 172032, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = .....
Always that size, 172032 (which occurs only a couple of times afaict
- it's mmaping space to read either the RPM database or APT package
lists into i think).
This happens with swap disabled. It happens with the duff disk
removed from the machine. It happens with any of the following Fedora
kernels:
kernel-2.6.11-1.35_FC3
kernel-2.6.13-1.1532_FC4
kernel-smp-2.6.13-1.1532_FC4
I havn't tried any others.
The keyboard is unresponsive: caps/num lock LEDs unresponsive.
Doesn't respond to SysRQ. I tried enabling the NMI watchdog
(nmi_watchdog=2 for lapic NMI), but it doesn't fire either - NMI
interrupts seem to come in 1/minute when it is running but even
waiting 5 minutes+ after the hard-hang it doesn't fire. Machine
appears to be completely wedged.
The machine otherwise seems to work fine, as long I don't run apt
(I'm using it now). The questions therefore are:
- It seems very much like a hardware problem, right? Or is there any
chance sata_sil could be locking up (eg in response to hardware
errors)?
- What hardware though? (RAM? Disk? Sil3112 controller?) If its apt
specific (only trigger i've found so far) then it might due to
one of the remaining two disks also having a problem, a problem
which causes some weird wedge in either the sil3112 hardware or in
libata sata_sil.
- Any easyish way to get more information from the kernel on what it
was doing before the wedge? Or was NMI the only hope?
I'm at a loss as to which hardware to start replacing :( to try fix
this. Any tips, hints would be appreciated. Usually Linux is pretty
verbose about broken hardware.
regards,
--
Paul Jakma [email protected] [email protected] Key ID: 64A2FF6A
Fortune:
"So, do you...like...stuff?"
--Ralph Wiggum
I Love Lisa (Episode 9F13)