Hi,
I've been trying to make suspend-to-ram part of my day-by-day life, but there
are still some issues. For example, I did:
$ sync && echo "mem" >/sys/power/state
(I don't know if sync is needed or helps, but I do it anyway - I *really* love my data)
unplugged everything (power, mouse, network cable, ...), got to work, plugged
everything back, power up, dmesg:
[ 1.367928] Restarting tasks ... <4>ohci_hcd 0000:00:13.1: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
[ 1.402715] done.
[ 1.627564] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 1.627568] tg3: eth0: Flow control is on for TX and on for RX.
[ 10.448935] usb 3-3: USB disconnect, address 3
[ 10.811866] ohci_hcd 0000:00:13.1: IRQ INTR_SF lossage
[ 10.811871] ohci_hcd 0000:00:13.1: leak ed ffff810037991050 (#00) state 0 (has tds)
After this my mouse doesn't work and I'm unable to reboot/poweroff my laptop (not
even alt+sysreq+b work). It locks hard.
I have been playing with pci=assign-busses (thinking about IRQ-s here) and pci=noacpi.
No result. However, with pci=assign-busses I got this (a small variation of the message above):
[ 1.743528] Restarting tasks ... <3>hub 1-0:1.0: port 5 disabled by hub (EMI?), re-enabling...
[ 1.743563] usb 1-5: USB disconnect, address 3
[ 1.782485] usb 1-5: new high speed USB device using ehci_hcd and address 6
[ 1.785747] done.
[ 1.831805] usb 1-5: configuration #1 chosen from 1 choice
[ 1.834418] scsi3 : SCSI emulation for USB Mass Storage devices
[ 1.834741] usb-storage: device found at 6
[ 1.834785] usb-storage: waiting for device to settle before scanning
[ 1.845293] ohci_hcd 0000:00:13.1: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
I looked in 'kernel-parameters.txt" and in "x86_86/boot-options.txt" but I did not find
anything that could help (that is: usb related).
Has anyone else experienced this?
I'll try to pull 2.6.23-rc8 tonight and play with it. I've seen some ACPI related stuff
in ChangeLog. Who knows ...
Thanks,
--
Mihai Donțu
(linux-usb-devel added to CC)
On Tue, 25 Sep 2007, Mihai Don?u wrote:
> [ 1.743528] Restarting tasks ... <3>hub 1-0:1.0: port 5 disabled by hub (EMI?), re-enabling...
> [ 1.743563] usb 1-5: USB disconnect, address 3
> [ 1.782485] usb 1-5: new high speed USB device using ehci_hcd and address 6
> [ 1.785747] done.
> [ 1.831805] usb 1-5: configuration #1 chosen from 1 choice
> [ 1.834418] scsi3 : SCSI emulation for USB Mass Storage devices
> [ 1.834741] usb-storage: device found at 6
> [ 1.834785] usb-storage: waiting for device to settle before scanning
> [ 1.845293] ohci_hcd 0000:00:13.1: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
Hi Mihai,
does booting with 'irqpoll' kernel parameter have any effect?
--
Jiri Kosina
On Tuesday 25 September 2007, Jiri Kosina wrote:
> (linux-usb-devel added to CC)
>
> On Tue, 25 Sep 2007, Mihai Don?u wrote:
>
> > [ 1.743528] Restarting tasks ... <3>hub 1-0:1.0: port 5 disabled by hub (EMI?), re-enabling...
> > [ 1.743563] usb 1-5: USB disconnect, address 3
> > [ 1.782485] usb 1-5: new high speed USB device using ehci_hcd and address 6
> > [ 1.785747] done.
> > [ 1.831805] usb 1-5: configuration #1 chosen from 1 choice
> > [ 1.834418] scsi3 : SCSI emulation for USB Mass Storage devices
> > [ 1.834741] usb-storage: device found at 6
> > [ 1.834785] usb-storage: waiting for device to settle before scanning
> > [ 1.845293] ohci_hcd 0000:00:13.1: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
>
> Hi Mihai,
>
> does booting with 'irqpoll' kernel parameter have any effect?
No, 'sorry. I get the same message as above. Strangely, 'irqpoll'
disabled 'alt-sysreq-<cmd>' (noticed this after power up).
--
Mihai Donțu