Fix a s/maxium/maxim/ typo in DT binding documentation.
Reported-by: Sergei Shtylyov <[email protected]>
Signed-off-by: Guennadi Liakhovetski <[email protected]>
---
Mark, if still possible, feel free to merge this with the original patch.
Thanks
Guennadi
.../bindings/regulator/max8973-regulator.txt | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/regulator/max8973-regulator.txt b/Documentation/devicetree/bindings/regulator/max8973-regulator.txt
index 8d38ab2..4f15d8a 100644
--- a/Documentation/devicetree/bindings/regulator/max8973-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/max8973-regulator.txt
@@ -2,7 +2,7 @@
Required properties:
-- compatible: must be "maxium,max8973"
+- compatible: must be "maxim,max8973"
- reg: the i2c slave address of the regulator. It should be 0x1b.
Any standard regulator properties can be used to configure the single max8973
@@ -11,7 +11,7 @@ DCDC.
Example:
max8973@1b {
- compatible = "maxium,max8973";
+ compatible = "maxim,max8973";
reg = <0x1b>;
regulator-min-microvolt = <935000>;
--
1.7.2.5
On Tue, Jun 25, 2013 at 09:07:06AM +0200, Guennadi Liakhovetski wrote:
> Fix a s/maxium/maxim/ typo in DT binding documentation.
Applied, thanks.