2019-04-19 18:22:11

by Peng Ma

Subject: [PATCH] dmaengine: fsl-qdma: fixed the source/destination descriptior format

CMD of Source/Destination descriptior format should be lower of
struct fsl_qdma_engine number data address.

Signed-off-by: Peng Ma <[email protected]>
---
drivers/dma/fsl-qdma.c | 29 ++++++++++++++++++-----------
1 files changed, 18 insertions(+), 11 deletions(-)

diff --git a/drivers/dma/fsl-qdma.c b/drivers/dma/fsl-qdma.c
index aa1d0ae..542765a 100644
--- a/drivers/dma/fsl-qdma.c
+++ b/drivers/dma/fsl-qdma.c
@@ -113,6 +113,7 @@
/* Field definition for Descriptor offset */
#define QDMA_CCDF_STATUS 20
#define QDMA_CCDF_OFFSET 20
+#define QDMA_SDDF_CMD(x) (((u64)(x)) << 32)

/* Field definition for safe loop count*/
#define FSL_QDMA_HALT_COUNT 1500
@@ -214,6 +215,12 @@ struct fsl_qdma_engine {

};

+static inline void
+qdma_sddf_set_cmd(struct fsl_qdma_format *sddf, u32 val)
+{
+ sddf->data = QDMA_SDDF_CMD(val);
+}
+
static inline u64
qdma_ccdf_addr_get64(const struct fsl_qdma_format *ccdf)
{
@@ -341,6 +348,7 @@ static void fsl_qdma_free_chan_resources(struct dma_chan *chan)
static void fsl_qdma_comp_fill_memcpy(struct fsl_qdma_comp *fsl_comp,
dma_addr_t dst, dma_addr_t src, u32 len)
{
+ u32 cmd;
struct fsl_qdma_format *sdf, *ddf;
struct fsl_qdma_format *ccdf, *csgf_desc, *csgf_src, *csgf_dest;

@@ -353,6 +361,7 @@ static void fsl_qdma_comp_fill_memcpy(struct fsl_qdma_comp *fsl_comp,

memset(fsl_comp->virt_addr, 0, FSL_QDMA_COMMAND_BUFFER_SIZE);
memset(fsl_comp->desc_virt_addr, 0, FSL_QDMA_DESCRIPTOR_BUFFER_SIZE);
+
/* Head Command Descriptor(Frame Descriptor) */
qdma_desc_addr_set64(ccdf, fsl_comp->bus_addr + 16);
qdma_ccdf_set_format(ccdf, qdma_ccdf_get_offset(ccdf));
@@ -369,14 +378,14 @@ static void fsl_qdma_comp_fill_memcpy(struct fsl_qdma_comp *fsl_comp,
/* This entry is the last entry. */
qdma_csgf_set_f(csgf_dest, len);
/* Descriptor Buffer */
- sdf->data =
- cpu_to_le64(FSL_QDMA_CMD_RWTTYPE <<
- FSL_QDMA_CMD_RWTTYPE_OFFSET);
- ddf->data =
- cpu_to_le64(FSL_QDMA_CMD_RWTTYPE <<
- FSL_QDMA_CMD_RWTTYPE_OFFSET);
- ddf->data |=
- cpu_to_le64(FSL_QDMA_CMD_LWC << FSL_QDMA_CMD_LWC_OFFSET);
+ cmd = cpu_to_le32(FSL_QDMA_CMD_RWTTYPE <<
+ FSL_QDMA_CMD_RWTTYPE_OFFSET);
+ qdma_sddf_set_cmd(sdf, cmd);
+
+ cmd = cpu_to_le32(FSL_QDMA_CMD_RWTTYPE <<
+ FSL_QDMA_CMD_RWTTYPE_OFFSET);
+ cmd |= cpu_to_le32(FSL_QDMA_CMD_LWC << FSL_QDMA_CMD_LWC_OFFSET);
+ qdma_sddf_set_cmd(ddf, cmd);
}

/*
@@ -701,10 +710,8 @@ static irqreturn_t fsl_qdma_error_handler(int irq, void *dev_id)

intr = qdma_readl(fsl_qdma, status + FSL_QDMA_DEDR);

- if (intr) {
+ if (intr)
dev_err(fsl_qdma->dma_dev.dev, "DMA transaction error!\n");
- return IRQ_NONE;
- }

qdma_writel(fsl_qdma, FSL_QDMA_DEDR_CLEAR, status + FSL_QDMA_DEDR);
return IRQ_HANDLED;
--
1.7.1

2019-04-26 11:53:41

by Vinod Koul

Subject: Re: [PATCH] dmaengine: fsl-qdma: fixed the source/destination descriptior format

On 19-04-19, 08:46, Peng Ma wrote:
> CMD of Source/Destination descriptior format should be lower of

s/descriptior/descriptor

> struct fsl_qdma_engine number data address.
>
> Signed-off-by: Peng Ma <[email protected]>
> ---
> drivers/dma/fsl-qdma.c | 29 ++++++++++++++++++-----------
> 1 files changed, 18 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/dma/fsl-qdma.c b/drivers/dma/fsl-qdma.c
> index aa1d0ae..542765a 100644
> --- a/drivers/dma/fsl-qdma.c
> +++ b/drivers/dma/fsl-qdma.c
> @@ -113,6 +113,7 @@
> /* Field definition for Descriptor offset */
> #define QDMA_CCDF_STATUS 20
> #define QDMA_CCDF_OFFSET 20
> +#define QDMA_SDDF_CMD(x) (((u64)(x)) << 32)
>
> /* Field definition for safe loop count*/
> #define FSL_QDMA_HALT_COUNT 1500
> @@ -214,6 +215,12 @@ struct fsl_qdma_engine {
>
> };
>
> +static inline void
> +qdma_sddf_set_cmd(struct fsl_qdma_format *sddf, u32 val)
> +{
> + sddf->data = QDMA_SDDF_CMD(val);
> +}
> +
> static inline u64
> qdma_ccdf_addr_get64(const struct fsl_qdma_format *ccdf)
> {
> @@ -341,6 +348,7 @@ static void fsl_qdma_free_chan_resources(struct dma_chan *chan)
> static void fsl_qdma_comp_fill_memcpy(struct fsl_qdma_comp *fsl_comp,
> dma_addr_t dst, dma_addr_t src, u32 len)
> {
> + u32 cmd;
> struct fsl_qdma_format *sdf, *ddf;
> struct fsl_qdma_format *ccdf, *csgf_desc, *csgf_src, *csgf_dest;
>
> @@ -353,6 +361,7 @@ static void fsl_qdma_comp_fill_memcpy(struct fsl_qdma_comp *fsl_comp,
>
> memset(fsl_comp->virt_addr, 0, FSL_QDMA_COMMAND_BUFFER_SIZE);
> memset(fsl_comp->desc_virt_addr, 0, FSL_QDMA_DESCRIPTOR_BUFFER_SIZE);
> +
> /* Head Command Descriptor(Frame Descriptor) */
> qdma_desc_addr_set64(ccdf, fsl_comp->bus_addr + 16);
> qdma_ccdf_set_format(ccdf, qdma_ccdf_get_offset(ccdf));
> @@ -369,14 +378,14 @@ static void fsl_qdma_comp_fill_memcpy(struct fsl_qdma_comp *fsl_comp,
> /* This entry is the last entry. */
> qdma_csgf_set_f(csgf_dest, len);
> /* Descriptor Buffer */
> - sdf->data =
> - cpu_to_le64(FSL_QDMA_CMD_RWTTYPE <<
> - FSL_QDMA_CMD_RWTTYPE_OFFSET);
> - ddf->data =
> - cpu_to_le64(FSL_QDMA_CMD_RWTTYPE <<
> - FSL_QDMA_CMD_RWTTYPE_OFFSET);
> - ddf->data |=
> - cpu_to_le64(FSL_QDMA_CMD_LWC << FSL_QDMA_CMD_LWC_OFFSET);
> + cmd = cpu_to_le32(FSL_QDMA_CMD_RWTTYPE <<
> + FSL_QDMA_CMD_RWTTYPE_OFFSET);
> + qdma_sddf_set_cmd(sdf, cmd);
> +
> + cmd = cpu_to_le32(FSL_QDMA_CMD_RWTTYPE <<
> + FSL_QDMA_CMD_RWTTYPE_OFFSET);
> + cmd |= cpu_to_le32(FSL_QDMA_CMD_LWC << FSL_QDMA_CMD_LWC_OFFSET);
> + qdma_sddf_set_cmd(ddf, cmd);
> }
>
> /*
> @@ -701,10 +710,8 @@ static irqreturn_t fsl_qdma_error_handler(int irq, void *dev_id)
>
> intr = qdma_readl(fsl_qdma, status + FSL_QDMA_DEDR);
>
> - if (intr) {
> + if (intr)
> dev_err(fsl_qdma->dma_dev.dev, "DMA transaction error!\n");
> - return IRQ_NONE;
> - }

this seems unrelated can you explain?

>
> qdma_writel(fsl_qdma, FSL_QDMA_DEDR_CLEAR, status + FSL_QDMA_DEDR);
> return IRQ_HANDLED;
> --
> 1.7.1

--
~Vinod

2019-04-28 02:01:45

by Peng Ma

Subject: RE: [EXT] Re: [PATCH] dmaengine: fsl-qdma: fixed the source/destination descriptior format

Hi Vinod,

Thanks your comments.
Please see my comments inline.

Best Regards,
Peng

>-----Original Message-----
>From: Vinod Koul <[email protected]>
>Sent: 2019??4??26?? 19:51
>To: Peng Ma <[email protected]>
>Cc: [email protected]; Leo Li <[email protected]>;
>[email protected]; [email protected]
>Subject: [EXT] Re: [PATCH] dmaengine: fsl-qdma: fixed the source/destination
>descriptior format
>
>Caution: EXT Email
>
>On 19-04-19, 08:46, Peng Ma wrote:
>> CMD of Source/Destination descriptior format should be lower of
>
>s/descriptior/descriptor
>
[Peng Ma] Got it.
>> struct fsl_qdma_engine number data address.
>>
>> Signed-off-by: Peng Ma <[email protected]>
>> ---
>> drivers/dma/fsl-qdma.c | 29 ++++++++++++++++++-----------
>> 1 files changed, 18 insertions(+), 11 deletions(-)
>>
>> diff --git a/drivers/dma/fsl-qdma.c b/drivers/dma/fsl-qdma.c index
>> aa1d0ae..542765a 100644
>> --- a/drivers/dma/fsl-qdma.c
>> +++ b/drivers/dma/fsl-qdma.c
>> @@ -113,6 +113,7 @@
>> /* Field definition for Descriptor offset */
>> #define QDMA_CCDF_STATUS 20
>> #define QDMA_CCDF_OFFSET 20
>> +#define QDMA_SDDF_CMD(x) (((u64)(x)) << 32)
>>
>> /* Field definition for safe loop count*/
>> #define FSL_QDMA_HALT_COUNT 1500
>> @@ -214,6 +215,12 @@ struct fsl_qdma_engine {
>>
>> };
>>
>> +static inline void
>> +qdma_sddf_set_cmd(struct fsl_qdma_format *sddf, u32 val) {
>> + sddf->data = QDMA_SDDF_CMD(val); }
>> +
>> static inline u64
>> qdma_ccdf_addr_get64(const struct fsl_qdma_format *ccdf) { @@
>-341,6
>> +348,7 @@ static void fsl_qdma_free_chan_resources(struct dma_chan
>> *chan) static void fsl_qdma_comp_fill_memcpy(struct fsl_qdma_comp
>*fsl_comp,
>> dma_addr_t dst, dma_addr_t
>src,
>> u32 len) {
>> + u32 cmd;
>> struct fsl_qdma_format *sdf, *ddf;
>> struct fsl_qdma_format *ccdf, *csgf_desc, *csgf_src, *csgf_dest;
>>
>> @@ -353,6 +361,7 @@ static void fsl_qdma_comp_fill_memcpy(struct
>> fsl_qdma_comp *fsl_comp,
>>
>> memset(fsl_comp->virt_addr, 0,
>FSL_QDMA_COMMAND_BUFFER_SIZE);
>> memset(fsl_comp->desc_virt_addr, 0,
>> FSL_QDMA_DESCRIPTOR_BUFFER_SIZE);
>> +
>> /* Head Command Descriptor(Frame Descriptor) */
>> qdma_desc_addr_set64(ccdf, fsl_comp->bus_addr + 16);
>> qdma_ccdf_set_format(ccdf, qdma_ccdf_get_offset(ccdf)); @@
>> -369,14 +378,14 @@ static void fsl_qdma_comp_fill_memcpy(struct
>fsl_qdma_comp *fsl_comp,
>> /* This entry is the last entry. */
>> qdma_csgf_set_f(csgf_dest, len);
>> /* Descriptor Buffer */
>> - sdf->data =
>> - cpu_to_le64(FSL_QDMA_CMD_RWTTYPE <<
>> - FSL_QDMA_CMD_RWTTYPE_OFFSET);
>> - ddf->data =
>> - cpu_to_le64(FSL_QDMA_CMD_RWTTYPE <<
>> - FSL_QDMA_CMD_RWTTYPE_OFFSET);
>> - ddf->data |=
>> - cpu_to_le64(FSL_QDMA_CMD_LWC <<
>FSL_QDMA_CMD_LWC_OFFSET);
>> + cmd = cpu_to_le32(FSL_QDMA_CMD_RWTTYPE <<
>> + FSL_QDMA_CMD_RWTTYPE_OFFSET);
>> + qdma_sddf_set_cmd(sdf, cmd);
>> +
>> + cmd = cpu_to_le32(FSL_QDMA_CMD_RWTTYPE <<
>> + FSL_QDMA_CMD_RWTTYPE_OFFSET);
>> + cmd |= cpu_to_le32(FSL_QDMA_CMD_LWC <<
>FSL_QDMA_CMD_LWC_OFFSET);
>> + qdma_sddf_set_cmd(ddf, cmd);
>> }
>>
>> /*
>> @@ -701,10 +710,8 @@ static irqreturn_t fsl_qdma_error_handler(int
>> irq, void *dev_id)
>>
>> intr = qdma_readl(fsl_qdma, status + FSL_QDMA_DEDR);
>>
>> - if (intr) {
>> + if (intr)
>> dev_err(fsl_qdma->dma_dev.dev, "DMA transaction
>error!\n");
>> - return IRQ_NONE;
>> - }
>
>this seems unrelated can you explain?
>
[Peng Ma] This is an added improvement. When an error occurs we should clean the error reg then to return.
I forgot to explain it on comments. Should I add this changed to the comments?
>>
>> qdma_writel(fsl_qdma, FSL_QDMA_DEDR_CLEAR, status +
>FSL_QDMA_DEDR);
>> return IRQ_HANDLED;
>> --
>> 1.7.1
>
>--
>~Vinod

2019-04-29 05:17:33

by Vinod Koul

Subject: Re: [EXT] Re: [PATCH] dmaengine: fsl-qdma: fixed the source/destination descriptior format

On 28-04-19, 02:00, Peng Ma wrote:
> Hi Vinod,
>
> Thanks your comments.
> Please see my comments inline.
>
> Best Regards,
> Peng
>
> >-----Original Message-----
> >From: Vinod Koul <[email protected]>
> >Sent: 2019年4月26日 19:51
> >To: Peng Ma <[email protected]>
> >Cc: [email protected]; Leo Li <[email protected]>;
> >[email protected]; [email protected]
> >Subject: [EXT] Re: [PATCH] dmaengine: fsl-qdma: fixed the source/destination
> >descriptior format
> >
> >Caution: EXT Email
> >
> >On 19-04-19, 08:46, Peng Ma wrote:
> >> CMD of Source/Destination descriptior format should be lower of
> >
> >s/descriptior/descriptor
> >
> [Peng Ma] Got it.
> >> struct fsl_qdma_engine number data address.
> >>
> >> Signed-off-by: Peng Ma <[email protected]>
> >> ---
> >> drivers/dma/fsl-qdma.c | 29 ++++++++++++++++++-----------
> >> 1 files changed, 18 insertions(+), 11 deletions(-)
> >>
> >> diff --git a/drivers/dma/fsl-qdma.c b/drivers/dma/fsl-qdma.c index
> >> aa1d0ae..542765a 100644
> >> --- a/drivers/dma/fsl-qdma.c
> >> +++ b/drivers/dma/fsl-qdma.c
> >> @@ -113,6 +113,7 @@
> >> /* Field definition for Descriptor offset */
> >> #define QDMA_CCDF_STATUS 20
> >> #define QDMA_CCDF_OFFSET 20
> >> +#define QDMA_SDDF_CMD(x) (((u64)(x)) << 32)
> >>
> >> /* Field definition for safe loop count*/
> >> #define FSL_QDMA_HALT_COUNT 1500
> >> @@ -214,6 +215,12 @@ struct fsl_qdma_engine {
> >>
> >> };
> >>
> >> +static inline void
> >> +qdma_sddf_set_cmd(struct fsl_qdma_format *sddf, u32 val) {
> >> + sddf->data = QDMA_SDDF_CMD(val); }
> >> +
> >> static inline u64
> >> qdma_ccdf_addr_get64(const struct fsl_qdma_format *ccdf) { @@
> >-341,6
> >> +348,7 @@ static void fsl_qdma_free_chan_resources(struct dma_chan
> >> *chan) static void fsl_qdma_comp_fill_memcpy(struct fsl_qdma_comp
> >*fsl_comp,
> >> dma_addr_t dst, dma_addr_t
> >src,
> >> u32 len) {
> >> + u32 cmd;
> >> struct fsl_qdma_format *sdf, *ddf;
> >> struct fsl_qdma_format *ccdf, *csgf_desc, *csgf_src, *csgf_dest;
> >>
> >> @@ -353,6 +361,7 @@ static void fsl_qdma_comp_fill_memcpy(struct
> >> fsl_qdma_comp *fsl_comp,
> >>
> >> memset(fsl_comp->virt_addr, 0,
> >FSL_QDMA_COMMAND_BUFFER_SIZE);
> >> memset(fsl_comp->desc_virt_addr, 0,
> >> FSL_QDMA_DESCRIPTOR_BUFFER_SIZE);
> >> +
> >> /* Head Command Descriptor(Frame Descriptor) */
> >> qdma_desc_addr_set64(ccdf, fsl_comp->bus_addr + 16);
> >> qdma_ccdf_set_format(ccdf, qdma_ccdf_get_offset(ccdf)); @@
> >> -369,14 +378,14 @@ static void fsl_qdma_comp_fill_memcpy(struct
> >fsl_qdma_comp *fsl_comp,
> >> /* This entry is the last entry. */
> >> qdma_csgf_set_f(csgf_dest, len);
> >> /* Descriptor Buffer */
> >> - sdf->data =
> >> - cpu_to_le64(FSL_QDMA_CMD_RWTTYPE <<
> >> - FSL_QDMA_CMD_RWTTYPE_OFFSET);
> >> - ddf->data =
> >> - cpu_to_le64(FSL_QDMA_CMD_RWTTYPE <<
> >> - FSL_QDMA_CMD_RWTTYPE_OFFSET);
> >> - ddf->data |=
> >> - cpu_to_le64(FSL_QDMA_CMD_LWC <<
> >FSL_QDMA_CMD_LWC_OFFSET);
> >> + cmd = cpu_to_le32(FSL_QDMA_CMD_RWTTYPE <<
> >> + FSL_QDMA_CMD_RWTTYPE_OFFSET);
> >> + qdma_sddf_set_cmd(sdf, cmd);
> >> +
> >> + cmd = cpu_to_le32(FSL_QDMA_CMD_RWTTYPE <<
> >> + FSL_QDMA_CMD_RWTTYPE_OFFSET);
> >> + cmd |= cpu_to_le32(FSL_QDMA_CMD_LWC <<
> >FSL_QDMA_CMD_LWC_OFFSET);
> >> + qdma_sddf_set_cmd(ddf, cmd);
> >> }
> >>
> >> /*
> >> @@ -701,10 +710,8 @@ static irqreturn_t fsl_qdma_error_handler(int
> >> irq, void *dev_id)
> >>
> >> intr = qdma_readl(fsl_qdma, status + FSL_QDMA_DEDR);
> >>
> >> - if (intr) {
> >> + if (intr)
> >> dev_err(fsl_qdma->dma_dev.dev, "DMA transaction
> >error!\n");
> >> - return IRQ_NONE;
> >> - }
> >
> >this seems unrelated can you explain?
> >
> [Peng Ma] This is an added improvement. When an error occurs we should clean the error reg then to return.
> I forgot to explain it on comments. Should I add this changed to the comments?

Yes and you should make it a separate patch. A patch should do only 1
thing!

--
~Vinod

2019-04-29 06:30:05

by Peng Ma

Subject: RE: [EXT] Re: [PATCH] dmaengine: fsl-qdma: fixed the source/destination descriptior format

>-----Original Message-----
>From: Vinod Koul <[email protected]>
>Sent: 2019年4月29日 13:16
>To: Peng Ma <[email protected]>
>Cc: [email protected]; Leo Li <[email protected]>;
>[email protected]; [email protected]
>Subject: Re: [EXT] Re: [PATCH] dmaengine: fsl-qdma: fixed the
>source/destination descriptior format
>
>Caution: EXT Email
>
>On 28-04-19, 02:00, Peng Ma wrote:
>> Hi Vinod,
>>
>> Thanks your comments.
>> Please see my comments inline.
>>
>> Best Regards,
>> Peng
>>
>> >-----Original Message-----
>> >From: Vinod Koul <[email protected]>
>> >Sent: 2019年4月26日 19:51
>> >To: Peng Ma <[email protected]>
>> >Cc: [email protected]; Leo Li <[email protected]>;
>> >[email protected]; [email protected]
>> >Subject: [EXT] Re: [PATCH] dmaengine: fsl-qdma: fixed the
>> >source/destination descriptior format
>> >
>> >Caution: EXT Email
>> >
>> >On 19-04-19, 08:46, Peng Ma wrote:
>> >> CMD of Source/Destination descriptior format should be lower of
>> >
>> >s/descriptior/descriptor
>> >
>> [Peng Ma] Got it.
>> >> struct fsl_qdma_engine number data address.
>> >>
>> >> Signed-off-by: Peng Ma <[email protected]>
>> >> ---
>> >> drivers/dma/fsl-qdma.c | 29 ++++++++++++++++++-----------
>> >> 1 files changed, 18 insertions(+), 11 deletions(-)
>> >>
>> >> diff --git a/drivers/dma/fsl-qdma.c b/drivers/dma/fsl-qdma.c index
>> >> aa1d0ae..542765a 100644
>> >> --- a/drivers/dma/fsl-qdma.c
>> >> +++ b/drivers/dma/fsl-qdma.c
>> >> @@ -113,6 +113,7 @@
>> >> /* Field definition for Descriptor offset */
>> >> #define QDMA_CCDF_STATUS 20
>> >> #define QDMA_CCDF_OFFSET 20
>> >> +#define QDMA_SDDF_CMD(x) (((u64)(x)) << 32)
>> >>
>> >> /* Field definition for safe loop count*/
>> >> #define FSL_QDMA_HALT_COUNT 1500
>> >> @@ -214,6 +215,12 @@ struct fsl_qdma_engine {
>> >>
>> >> };
>> >>
>> >> +static inline void
>> >> +qdma_sddf_set_cmd(struct fsl_qdma_format *sddf, u32 val) {
>> >> + sddf->data = QDMA_SDDF_CMD(val); }
>> >> +
>> >> static inline u64
>> >> qdma_ccdf_addr_get64(const struct fsl_qdma_format *ccdf) { @@
>> >-341,6
>> >> +348,7 @@ static void fsl_qdma_free_chan_resources(struct dma_chan
>> >> *chan) static void fsl_qdma_comp_fill_memcpy(struct fsl_qdma_comp
>> >*fsl_comp,
>> >> dma_addr_t dst,
>dma_addr_t
>> >src,
>> >> u32 len) {
>> >> + u32 cmd;
>> >> struct fsl_qdma_format *sdf, *ddf;
>> >> struct fsl_qdma_format *ccdf, *csgf_desc, *csgf_src,
>> >> *csgf_dest;
>> >>
>> >> @@ -353,6 +361,7 @@ static void fsl_qdma_comp_fill_memcpy(struct
>> >> fsl_qdma_comp *fsl_comp,
>> >>
>> >> memset(fsl_comp->virt_addr, 0,
>> >FSL_QDMA_COMMAND_BUFFER_SIZE);
>> >> memset(fsl_comp->desc_virt_addr, 0,
>> >> FSL_QDMA_DESCRIPTOR_BUFFER_SIZE);
>> >> +
>> >> /* Head Command Descriptor(Frame Descriptor) */
>> >> qdma_desc_addr_set64(ccdf, fsl_comp->bus_addr + 16);
>> >> qdma_ccdf_set_format(ccdf, qdma_ccdf_get_offset(ccdf)); @@
>> >> -369,14 +378,14 @@ static void fsl_qdma_comp_fill_memcpy(struct
>> >fsl_qdma_comp *fsl_comp,
>> >> /* This entry is the last entry. */
>> >> qdma_csgf_set_f(csgf_dest, len);
>> >> /* Descriptor Buffer */
>> >> - sdf->data =
>> >> - cpu_to_le64(FSL_QDMA_CMD_RWTTYPE <<
>> >> - FSL_QDMA_CMD_RWTTYPE_OFFSET);
>> >> - ddf->data =
>> >> - cpu_to_le64(FSL_QDMA_CMD_RWTTYPE <<
>> >> - FSL_QDMA_CMD_RWTTYPE_OFFSET);
>> >> - ddf->data |=
>> >> - cpu_to_le64(FSL_QDMA_CMD_LWC <<
>> >FSL_QDMA_CMD_LWC_OFFSET);
>> >> + cmd = cpu_to_le32(FSL_QDMA_CMD_RWTTYPE <<
>> >> + FSL_QDMA_CMD_RWTTYPE_OFFSET);
>> >> + qdma_sddf_set_cmd(sdf, cmd);
>> >> +
>> >> + cmd = cpu_to_le32(FSL_QDMA_CMD_RWTTYPE <<
>> >> + FSL_QDMA_CMD_RWTTYPE_OFFSET);
>> >> + cmd |= cpu_to_le32(FSL_QDMA_CMD_LWC <<
>> >FSL_QDMA_CMD_LWC_OFFSET);
>> >> + qdma_sddf_set_cmd(ddf, cmd);
>> >> }
>> >>
>> >> /*
>> >> @@ -701,10 +710,8 @@ static irqreturn_t fsl_qdma_error_handler(int
>> >> irq, void *dev_id)
>> >>
>> >> intr = qdma_readl(fsl_qdma, status + FSL_QDMA_DEDR);
>> >>
>> >> - if (intr) {
>> >> + if (intr)
>> >> dev_err(fsl_qdma->dma_dev.dev, "DMA transaction
>> >error!\n");
>> >> - return IRQ_NONE;
>> >> - }
>> >
>> >this seems unrelated can you explain?
>> >
>> [Peng Ma] This is an added improvement. When an error occurs we should
>clean the error reg then to return.
>> I forgot to explain it on comments. Should I add this changed to the
>comments?
>
>Yes and you should make it a separate patch. A patch should do only 1 thing!
>
[Peng Ma] OK, Got it, thanks.
Best Regards,
Peng
>--
>~Vinod