pci1xxxx is a PCIe switch with a multi-function endpoint on one of its
downstream ports. Quad-uart is one of the functions in the multi-function
endpoint. This patch adds device driver for the quad-uart function and
enumerates between 1 to 4 instances of uarts based on the PCIe subsystem
device ID.
The changes from v1->v2->v3->v4->v5->v6->v7->v8->v9->v10 are mentioned in
each patch in the patchset.
Thanks to Andy Shevchenko, Ilpo Jarvinen, Chritophe JAILLET, Geert
Uytterhoeven, Greg KH, Jiri Slaby for their review comments.
Kumaravel Thiagarajan (4):
serial: 8250_pci: Add serial8250_pci_setup_port definition in
8250_pcilib.c
serial: 8250_pci1xxxx: Add driver for quad-uart support
serial: 8250_pci1xxxx: Add RS485 support to quad-uart driver
serial: 8250_pci1xxxx: Add power management functions to quad-uart
driver
MAINTAINERS | 7 +
drivers/tty/serial/8250/8250_pci.c | 25 +-
drivers/tty/serial/8250/8250_pci1xxxx.c | 494 ++++++++++++++++++++++++
drivers/tty/serial/8250/8250_pcilib.c | 39 ++
drivers/tty/serial/8250/8250_pcilib.h | 15 +
drivers/tty/serial/8250/8250_port.c | 8 +
drivers/tty/serial/8250/Kconfig | 15 +
drivers/tty/serial/8250/Makefile | 2 +
include/uapi/linux/serial_core.h | 3 +
9 files changed, 586 insertions(+), 22 deletions(-)
create mode 100644 drivers/tty/serial/8250/8250_pci1xxxx.c
create mode 100644 drivers/tty/serial/8250/8250_pcilib.c
create mode 100644 drivers/tty/serial/8250/8250_pcilib.h
--
2.25.1
Move implementation of setup_port func() to serial8250_pci_setup_port.
Co-developed-by: Tharun Kumar P <[email protected]>
Signed-off-by: Tharun Kumar P <[email protected]>
Signed-off-by: Kumaravel Thiagarajan <[email protected]>
Reviewed-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
---
Changes in v10:
- No Change
Changes in v9:
- Added License in 8250_pcilib.c file
Changes in v8:
- Moved SERIAL_8250_PCILIB above 8250_PCI
Changes in v7:
- Used namespace 'SERIAL_8250_PCI' while exporting and importing symbols
- Included structures used in function declaration in 8250_pcilib.h file
Changes in v6:
- Made this patch first patch of the patch series
Changes in v5:
- This is the new patch added in v5 version of this patchset
- Moved implementation of setup_port from 8250_pci.c to 8250_pcilib.c
---
drivers/tty/serial/8250/8250_pci.c | 25 +++--------------
drivers/tty/serial/8250/8250_pcilib.c | 39 +++++++++++++++++++++++++++
drivers/tty/serial/8250/8250_pcilib.h | 15 +++++++++++
drivers/tty/serial/8250/Kconfig | 4 +++
drivers/tty/serial/8250/Makefile | 1 +
5 files changed, 62 insertions(+), 22 deletions(-)
create mode 100644 drivers/tty/serial/8250/8250_pcilib.c
create mode 100644 drivers/tty/serial/8250/8250_pcilib.h
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 6f66dc2ebacc..58cc9e19bd20 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -24,6 +24,7 @@
#include <asm/io.h>
#include "8250.h"
+#include "8250_pcilib.h"
/*
* init function returns:
@@ -89,28 +90,7 @@ static int
setup_port(struct serial_private *priv, struct uart_8250_port *port,
u8 bar, unsigned int offset, int regshift)
{
- struct pci_dev *dev = priv->dev;
-
- if (bar >= PCI_STD_NUM_BARS)
- return -EINVAL;
-
- if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) {
- if (!pcim_iomap(dev, bar, 0) && !pcim_iomap_table(dev))
- return -ENOMEM;
-
- port->port.iotype = UPIO_MEM;
- port->port.iobase = 0;
- port->port.mapbase = pci_resource_start(dev, bar) + offset;
- port->port.membase = pcim_iomap_table(dev)[bar] + offset;
- port->port.regshift = regshift;
- } else {
- port->port.iotype = UPIO_PORT;
- port->port.iobase = pci_resource_start(dev, bar) + offset;
- port->port.mapbase = 0;
- port->port.membase = NULL;
- port->port.regshift = 0;
- }
- return 0;
+ return serial8250_pci_setup_port(priv->dev, port, bar, offset, regshift);
}
/*
@@ -5759,3 +5739,4 @@ module_pci_driver(serial_pci_driver);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Generic 8250/16x50 PCI serial probe module");
MODULE_DEVICE_TABLE(pci, serial_pci_tbl);
+MODULE_IMPORT_NS(SERIAL_8250_PCI);
diff --git a/drivers/tty/serial/8250/8250_pcilib.c b/drivers/tty/serial/8250/8250_pcilib.c
new file mode 100644
index 000000000000..a7124cda1871
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_pcilib.c
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * 8250 PCI library.
+ *
+ * Copyright (C) 2001 Russell King, All Rights Reserved.
+ */
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+
+#include "8250.h"
+
+int serial8250_pci_setup_port(struct pci_dev *dev, struct uart_8250_port *port,
+ u8 bar, unsigned int offset, int regshift)
+{
+ if (bar >= PCI_STD_NUM_BARS)
+ return -EINVAL;
+
+ if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) {
+ if (!pcim_iomap(dev, bar, 0) && !pcim_iomap_table(dev))
+ return -ENOMEM;
+
+ port->port.iotype = UPIO_MEM;
+ port->port.iobase = 0;
+ port->port.mapbase = pci_resource_start(dev, bar) + offset;
+ port->port.membase = pcim_iomap_table(dev)[bar] + offset;
+ port->port.regshift = regshift;
+ } else {
+ port->port.iotype = UPIO_PORT;
+ port->port.iobase = pci_resource_start(dev, bar) + offset;
+ port->port.mapbase = 0;
+ port->port.membase = NULL;
+ port->port.regshift = 0;
+ }
+ return 0;
+}
+EXPORT_SYMBOL_NS_GPL(serial8250_pci_setup_port, SERIAL_8250_PCI);
+MODULE_LICENSE("GPL");
diff --git a/drivers/tty/serial/8250/8250_pcilib.h b/drivers/tty/serial/8250/8250_pcilib.h
new file mode 100644
index 000000000000..1aaf1b50ce9c
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_pcilib.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * 8250 PCI library header file.
+ *
+ * Copyright (C) 2001 Russell King, All Rights Reserved.
+ */
+
+#include <linux/types.h>
+
+struct pci_dev;
+
+struct uart_8250_port;
+
+int serial8250_pci_setup_port(struct pci_dev *dev, struct uart_8250_port *port, u8 bar,
+ unsigned int offset, int regshift);
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index d0b49e15fbf5..768b73d5cb9a 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -129,9 +129,13 @@ config SERIAL_8250_DMA
This builds DMA support that can be used with 8250/16650
compatible UART controllers that support DMA signaling.
+config SERIAL_8250_PCILIB
+ bool
+
config SERIAL_8250_PCI
tristate "8250/16550 PCI device support"
depends on SERIAL_8250 && PCI
+ select SERIAL_8250_PCILIB
default SERIAL_8250
help
This builds standard PCI serial support. You may be able to
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index bee908f99ea0..b9179d1f104b 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_SERIAL_8250) += 8250.o 8250_base.o
8250_base-$(CONFIG_SERIAL_8250_DMA) += 8250_dma.o
8250_base-$(CONFIG_SERIAL_8250_DWLIB) += 8250_dwlib.o
8250_base-$(CONFIG_SERIAL_8250_FINTEK) += 8250_fintek.o
+8250_base-$(CONFIG_SERIAL_8250_PCILIB) += 8250_pcilib.o
obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o
obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o
obj-$(CONFIG_SERIAL_8250_EXAR) += 8250_exar.o
--
2.25.1
On Sun, Dec 18, 2022 at 12:45:03AM +0530, Kumaravel Thiagarajan wrote:
> pci1xxxx is a PCIe switch with a multi-function endpoint on one of its
> downstream ports. Quad-uart is one of the functions in the multi-function
> endpoint. This patch adds device driver for the quad-uart function and
> enumerates between 1 to 4 instances of uarts based on the PCIe subsystem
> device ID.
>
> The changes from v1->v2->v3->v4->v5->v6->v7->v8->v9->v10 are mentioned in
> each patch in the patchset.
>
> Thanks to Andy Shevchenko, Ilpo Jarvinen, Chritophe JAILLET, Geert
> Uytterhoeven, Greg KH, Jiri Slaby for their review comments.
>
> Kumaravel Thiagarajan (4):
> serial: 8250_pci: Add serial8250_pci_setup_port definition in
> 8250_pcilib.c
> serial: 8250_pci1xxxx: Add driver for quad-uart support
> serial: 8250_pci1xxxx: Add RS485 support to quad-uart driver
> serial: 8250_pci1xxxx: Add power management functions to quad-uart
> driver
This doesn't apply to my tree anymore. Can you rebase it against
Linus's latest, or linux-next and resend?
thanks,
greg k-h