Slot resets are bus resets with additional logic to prevent a device
from being removed during the reset. Currently slot and bus resets have
separate implementations in pci.c, complicating higher level logic. As
discussed on the mailing list, they should be combined into a generic
function which performs an SBR. This change adds a function,
pci_reset_bus_function(), which first attempts a slot reset and then
attempts a bus reset if -ENOTTY is returned, such that there is now a
single device agnostic function to perform an SBR.
This new function is also needed to add SBR reset quirks and therefore
is exposed in pci.h.
Link: https://lkml.org/lkml/2021/3/23/911
Suggested-by: Alex Williamson <[email protected]>
Signed-off-by: Amey Narkhede <[email protected]>
Signed-off-by: Raphael Norwitz <[email protected]>
---
drivers/pci/pci.c | 19 +++++++++++--------
include/linux/pci.h | 1 +
2 files changed, 12 insertions(+), 8 deletions(-)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 16a17215f633..a8f8dd588d15 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -4982,6 +4982,15 @@ static int pci_dev_reset_slot_function(struct pci_dev *dev, int probe)
return pci_reset_hotplug_slot(dev->slot->hotplug, probe);
}
+int pci_reset_bus_function(struct pci_dev *dev, int probe)
+{
+ int rc = pci_dev_reset_slot_function(dev, probe);
+
+ if (rc != -ENOTTY)
+ return rc;
+ return pci_parent_bus_reset(dev, probe);
+}
+
static void pci_dev_lock(struct pci_dev *dev)
{
pci_cfg_access_lock(dev);
@@ -5102,10 +5111,7 @@ int __pci_reset_function_locked(struct pci_dev *dev)
rc = pci_pm_reset(dev, 0);
if (rc != -ENOTTY)
return rc;
- rc = pci_dev_reset_slot_function(dev, 0);
- if (rc != -ENOTTY)
- return rc;
- return pci_parent_bus_reset(dev, 0);
+ return pci_reset_bus_function(dev, 0);
}
EXPORT_SYMBOL_GPL(__pci_reset_function_locked);
@@ -5135,13 +5141,10 @@ int pci_probe_reset_function(struct pci_dev *dev)
if (rc != -ENOTTY)
return rc;
rc = pci_pm_reset(dev, 1);
- if (rc != -ENOTTY)
- return rc;
- rc = pci_dev_reset_slot_function(dev, 1);
if (rc != -ENOTTY)
return rc;
- return pci_parent_bus_reset(dev, 1);
+ return pci_reset_bus_function(dev, 1);
}
/**
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 86c799c97b77..979d54335ac1 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1228,6 +1228,7 @@ int pci_probe_reset_bus(struct pci_bus *bus);
int pci_reset_bus(struct pci_dev *dev);
void pci_reset_secondary_bus(struct pci_dev *dev);
void pcibios_reset_secondary_bus(struct pci_dev *dev);
+int pci_reset_bus_function(struct pci_dev *dev, int probe);
void pci_update_resource(struct pci_dev *dev, int resno);
int __must_check pci_assign_resource(struct pci_dev *dev, int i);
int __must_check pci_reassign_resource(struct pci_dev *dev, int i, resource_size_t add_size, resource_size_t align);
--
2.20.1
On Thu, Apr 08, 2021 at 06:23:40PM +0000, Raphael Norwitz wrote:
> Slot resets are bus resets with additional logic to prevent a device
> from being removed during the reset. Currently slot and bus resets have
> separate implementations in pci.c, complicating higher level logic. As
> discussed on the mailing list, they should be combined into a generic
> function which performs an SBR. This change adds a function,
> pci_reset_bus_function(), which first attempts a slot reset and then
> attempts a bus reset if -ENOTTY is returned, such that there is now a
> single device agnostic function to perform an SBR.
>
> This new function is also needed to add SBR reset quirks and therefore
> is exposed in pci.h.
>
> Link: https://lkml.org/lkml/2021/3/23/911
>
> Suggested-by: Alex Williamson <[email protected]>
> Signed-off-by: Amey Narkhede <[email protected]>
> Signed-off-by: Raphael Norwitz <[email protected]>
> ---
> drivers/pci/pci.c | 19 +++++++++++--------
> include/linux/pci.h | 1 +
> 2 files changed, 12 insertions(+), 8 deletions(-)
>
Thanks,
Reviewed-by: Leon Romanovsky <[email protected]>
On Thu, Apr 08, 2021 at 06:23:40PM +0000, Raphael Norwitz wrote:
> Slot resets are bus resets with additional logic to prevent a device
> from being removed during the reset. Currently slot and bus resets have
> separate implementations in pci.c, complicating higher level logic. As
> discussed on the mailing list, they should be combined into a generic
> function which performs an SBR. This change adds a function,
> pci_reset_bus_function(), which first attempts a slot reset and then
> attempts a bus reset if -ENOTTY is returned, such that there is now a
> single device agnostic function to perform an SBR.
>
> This new function is also needed to add SBR reset quirks and therefore
> is exposed in pci.h.
I dropped this exposure in pci.h because there's no user yet. We can
expose it when we add the user.
> Link: https://lkml.org/lkml/2021/3/23/911
>
> Suggested-by: Alex Williamson <[email protected]>
> Signed-off-by: Amey Narkhede <[email protected]>
> Signed-off-by: Raphael Norwitz <[email protected]>
Applied to pci/reset for v5.14 with subject
"PCI: Add pci_reset_bus_function() Secondary Bus Reset interface"
I attached the patch as applied.
> ---
> drivers/pci/pci.c | 19 +++++++++++--------
> include/linux/pci.h | 1 +
> 2 files changed, 12 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index 16a17215f633..a8f8dd588d15 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -4982,6 +4982,15 @@ static int pci_dev_reset_slot_function(struct pci_dev *dev, int probe)
> return pci_reset_hotplug_slot(dev->slot->hotplug, probe);
> }
>
> +int pci_reset_bus_function(struct pci_dev *dev, int probe)
> +{
> + int rc = pci_dev_reset_slot_function(dev, probe);
> +
> + if (rc != -ENOTTY)
> + return rc;
> + return pci_parent_bus_reset(dev, probe);
> +}
> +
> static void pci_dev_lock(struct pci_dev *dev)
> {
> pci_cfg_access_lock(dev);
> @@ -5102,10 +5111,7 @@ int __pci_reset_function_locked(struct pci_dev *dev)
> rc = pci_pm_reset(dev, 0);
> if (rc != -ENOTTY)
> return rc;
> - rc = pci_dev_reset_slot_function(dev, 0);
> - if (rc != -ENOTTY)
> - return rc;
> - return pci_parent_bus_reset(dev, 0);
> + return pci_reset_bus_function(dev, 0);
> }
> EXPORT_SYMBOL_GPL(__pci_reset_function_locked);
>
> @@ -5135,13 +5141,10 @@ int pci_probe_reset_function(struct pci_dev *dev)
> if (rc != -ENOTTY)
> return rc;
> rc = pci_pm_reset(dev, 1);
> - if (rc != -ENOTTY)
> - return rc;
> - rc = pci_dev_reset_slot_function(dev, 1);
> if (rc != -ENOTTY)
> return rc;
>
> - return pci_parent_bus_reset(dev, 1);
> + return pci_reset_bus_function(dev, 1);
> }
>
> /**
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 86c799c97b77..979d54335ac1 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -1228,6 +1228,7 @@ int pci_probe_reset_bus(struct pci_bus *bus);
> int pci_reset_bus(struct pci_dev *dev);
> void pci_reset_secondary_bus(struct pci_dev *dev);
> void pcibios_reset_secondary_bus(struct pci_dev *dev);
> +int pci_reset_bus_function(struct pci_dev *dev, int probe);
> void pci_update_resource(struct pci_dev *dev, int resno);
> int __must_check pci_assign_resource(struct pci_dev *dev, int i);
> int __must_check pci_reassign_resource(struct pci_dev *dev, int i, resource_size_t add_size, resource_size_t align);
> --
> 2.20.1
commit 0dad3ce523c2 ("PCI: Add pci_reset_bus_function() Secondary Bus Reset interface")
Author: Raphael Norwitz <[email protected]>
Date: Thu Apr 8 18:23:40 2021 +0000
PCI: Add pci_reset_bus_function() Secondary Bus Reset interface
pci_parent_bus_reset() resets a device by performing a Secondary Bus Reset
on a PCI-to-PCI bridge leading to the device.
pci_dev_reset_slot_function() does the same, except that it uses a hotplug
driver to keep the reset from looking like a hot-remove followed by a
hot-add.
Add a pci_reset_bus_function() wrapper, which attempts the hotplug driver
slot reset and falls back to the parent bus reset if that fails. This
provides a single interface for performing a Secondary Bus Reset.
[bhelgaas: commit log, don't expose yet]
Suggested-by: Alex Williamson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Amey Narkhede <[email protected]>
Signed-off-by: Raphael Norwitz <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index b717680377a9..452351025a09 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -5020,6 +5020,16 @@ static int pci_dev_reset_slot_function(struct pci_dev *dev, int probe)
return pci_reset_hotplug_slot(dev->slot->hotplug, probe);
}
+static int pci_reset_bus_function(struct pci_dev *dev, int probe)
+{
+ int rc;
+
+ rc = pci_dev_reset_slot_function(dev, probe);
+ if (rc != -ENOTTY)
+ return rc;
+ return pci_parent_bus_reset(dev, probe);
+}
+
static void pci_dev_lock(struct pci_dev *dev)
{
pci_cfg_access_lock(dev);
@@ -5140,10 +5150,7 @@ int __pci_reset_function_locked(struct pci_dev *dev)
rc = pci_pm_reset(dev, 0);
if (rc != -ENOTTY)
return rc;
- rc = pci_dev_reset_slot_function(dev, 0);
- if (rc != -ENOTTY)
- return rc;
- return pci_parent_bus_reset(dev, 0);
+ return pci_reset_bus_function(dev, 0);
}
EXPORT_SYMBOL_GPL(__pci_reset_function_locked);
@@ -5173,13 +5180,10 @@ int pci_probe_reset_function(struct pci_dev *dev)
if (rc != -ENOTTY)
return rc;
rc = pci_pm_reset(dev, 1);
- if (rc != -ENOTTY)
- return rc;
- rc = pci_dev_reset_slot_function(dev, 1);
if (rc != -ENOTTY)
return rc;
- return pci_parent_bus_reset(dev, 1);
+ return pci_reset_bus_function(dev, 1);
}
/**