remove one empty line.CHECK: Please don't use multiple blank lines
Signed-off-by: tawahpeggy <[email protected]>
---
drivers/staging/comedi/comedi_pcmcia.mod.c | 1 -
1 file changed, 0 insertion(+), 1 deletion(-)
create mode 100644 drivers/staging/comedi/comedi_pcmcia.mod.c
diff --git a/drivers/staging/comedi/comedi_pcmcia.mod.c b/drivers/staging/comedi/comedi_pcmcia.mod.c
index 0904b8765afs96..3984db1a39c8
--- /dev/null
+++ b/drivers/staging/comedi/comedi_pcmcia.mod.c
@@ -0,0 +1,31 @@
#include <linux/module.h>
#define INCLUDE_VERMAGIC
#include <linux/build-salt.h>
#include <linux/vermagic.h>
#include <linux/compiler.h>
BUILD_SALT;
MODULE_INFO(vermagic, VERMAGIC_STRING);
MODULE_INFO(name, KBUILD_MODNAME);
__visible struct module __this_module
__section(".gnu.linkonce.this_module") = {
.name = KBUILD_MODNAME,
.init = init_module,
#ifdef CONFIG_MODULE_UNLOAD
.exit = cleanup_module,
#endif
.arch = MODULE_ARCH_INIT,
};
#ifdef CONFIG_RETPOLINE
MODULE_INFO(retpoline, "Y");
#endif
MODULE_INFO(staging, "Y");
MODULE_INFO(depends, "pcmcia,comedi");
-
MODULE_INFO(srcversion, "ED971F2E01020DFA2B04486");
--
2.17.1
h-Hartman <[email protected]>
On Sun, Apr 11, 2021 at 04:49:38PM -0400, tawahpeggy wrote:
> remove one empty line.CHECK: Please don't use multiple blank lines
>
> Signed-off-by: tawahpeggy <[email protected]>
>
> ---
> drivers/staging/comedi/comedi_pcmcia.mod.c | 1 -
> 1 file changed, 0 insertion(+), 1 deletion(-)
> create mode 100644 drivers/staging/comedi/comedi_pcmcia.mod.c
>
> diff --git a/drivers/staging/comedi/comedi_pcmcia.mod.c b/drivers/staging/comedi/comedi_pcmcia.mod.c
> index 0904b8765afs96..3984db1a39c8
> --- /dev/null
> +++ b/drivers/staging/comedi/comedi_pcmcia.mod.c
> @@ -0,0 +1,31 @@
> #include <linux/module.h>
> #define INCLUDE_VERMAGIC
> #include <linux/build-salt.h>
> #include <linux/vermagic.h>
> #include <linux/compiler.h>
>
> BUILD_SALT;
>
> MODULE_INFO(vermagic, VERMAGIC_STRING);
> MODULE_INFO(name, KBUILD_MODNAME);
>
> __visible struct module __this_module
> __section(".gnu.linkonce.this_module") = {
> .name = KBUILD_MODNAME,
> .init = init_module,
> #ifdef CONFIG_MODULE_UNLOAD
> .exit = cleanup_module,
> #endif
> .arch = MODULE_ARCH_INIT,
> };
>
> #ifdef CONFIG_RETPOLINE
> MODULE_INFO(retpoline, "Y");
> #endif
>
> MODULE_INFO(staging, "Y");
>
> MODULE_INFO(depends, "pcmcia,comedi");
>
> -
> MODULE_INFO(srcversion, "ED971F2E01020DFA2B04486");
> --
> 2.17.1
Hi,
This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him
a patch that has triggered this response. He used to manually respond
to these common problems, but in order to save his sanity (he kept
writing the same thing over and over, yet to different people), I was
created. Hopefully you will not take offence and will fix the problem
in your patch and resubmit it so that it can be accepted into the Linux
kernel tree.
You are receiving this message because of the following common error(s)
as indicated below:
- Your patch did many different things all at once, making it difficult
to review. All Linux kernel patches need to only do one thing at a
time. If you need to do multiple things (such as clean up all coding
style issues in a file/driver), do it in a sequence of patches, each
one doing only one thing. This will make it easier to review the
patches to ensure that they are correct, and to help alleviate any
merge issues that larger patches can cause.
- You did not specify a description of why the patch is needed, or
possibly, any description at all, in the email body. Please read the
section entitled "The canonical patch format" in the kernel file,
Documentation/SubmittingPatches for what is needed in order to
properly describe the change.
- You did not write a descriptive Subject: for the patch, allowing Greg,
and everyone else, to know what this patch is all about. Please read
the section entitled "The canonical patch format" in the kernel file,
Documentation/SubmittingPatches for what a proper Subject: line should
look like.
- It looks like you did not use your "real" name for the patch on either
the Signed-off-by: line, or the From: line (both of which have to
match). Please read the kernel file, Documentation/SubmittingPatches
for how to do this correctly.
- Your patch does not match the description at all.
If you wish to discuss this problem further, or you have questions about
how to resolve this issue, please feel free to respond to this email and
Greg will reply once he has dug out from the pending patches received
from other developers.
thanks,
greg k-h's patch email bot
On Sun, 11 Apr 2021, tawahpeggy wrote:
> remove one empty line.CHECK: Please don't use multiple blank lines
Did something go wrong with the patch generation? You say that you are
removing one line, but the diff information looks like you are adding a
file. Normally a patch has only the changed lines and a few lines before
and after.
> Signed-off-by: tawahpeggy <[email protected]>
You need to put your real name when contributing to the Linux kernel.
For example, I would put:
Julia Lawall <[email protected]>
julia
>
> ---
> drivers/staging/comedi/comedi_pcmcia.mod.c | 1 -
> 1 file changed, 0 insertion(+), 1 deletion(-)
> create mode 100644 drivers/staging/comedi/comedi_pcmcia.mod.c
>
> diff --git a/drivers/staging/comedi/comedi_pcmcia.mod.c b/drivers/staging/comedi/comedi_pcmcia.mod.c
> index 0904b8765afs96..3984db1a39c8
> --- /dev/null
> +++ b/drivers/staging/comedi/comedi_pcmcia.mod.c
> @@ -0,0 +1,31 @@
> #include <linux/module.h>
> #define INCLUDE_VERMAGIC
> #include <linux/build-salt.h>
> #include <linux/vermagic.h>
> #include <linux/compiler.h>
>
> BUILD_SALT;
>
> MODULE_INFO(vermagic, VERMAGIC_STRING);
> MODULE_INFO(name, KBUILD_MODNAME);
>
> __visible struct module __this_module
> __section(".gnu.linkonce.this_module") = {
> .name = KBUILD_MODNAME,
> .init = init_module,
> #ifdef CONFIG_MODULE_UNLOAD
> .exit = cleanup_module,
> #endif
> .arch = MODULE_ARCH_INIT,
> };
>
> #ifdef CONFIG_RETPOLINE
> MODULE_INFO(retpoline, "Y");
> #endif
>
> MODULE_INFO(staging, "Y");
>
> MODULE_INFO(depends, "pcmcia,comedi");
>
> -
> MODULE_INFO(srcversion, "ED971F2E01020DFA2B04486");
> --
> 2.17.1
> h-Hartman <[email protected]>
>
> --
> You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
> To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/20210411204933.GA3524%40peggy-Lenovo-V130-15IKB.
>
On 11/04/2021 21:49, tawahpeggy wrote:
> remove one empty line.CHECK: Please don't use multiple blank lines
>
> Signed-off-by: tawahpeggy <[email protected]>
>
> ---
> drivers/staging/comedi/comedi_pcmcia.mod.c | 1 -
> 1 file changed, 0 insertion(+), 1 deletion(-)
> create mode 100644 drivers/staging/comedi/comedi_pcmcia.mod.c
>
> diff --git a/drivers/staging/comedi/comedi_pcmcia.mod.c b/drivers/staging/comedi/comedi_pcmcia.mod.c
> index 0904b8765afs96..3984db1a39c8
> --- /dev/null
> +++ b/drivers/staging/comedi/comedi_pcmcia.mod.c
The .mod.c files are not really part of the Linux kernel source code.
They are generated during the kernel build process. There is no point
checking them with checkpatch.pl. If you are adding them to your git
repository, then you are doing something wrong.
--
-=( Ian Abbott <[email protected]> || MEV Ltd. is a company )=-
-=( registered in England & Wales. Regd. number: 02862268. )=-
-=( Regd. addr.: S11 & 12 Building 67, Europa Business Park, )=-
-=( Bird Hall Lane, STOCKPORT, SK3 0XA, UK. || http://www.mev.co.uk )=-