For security, we would like to monitor and track when the thunderbolt
devices are authorized and deauthorized (i.e. when the thunderbolt sysfs
"authorized" attribute changes). Currently the userspace gets a udev
change notification when there is a change, but the state may have
changed (again) by the time we look at the authorized attribute in
sysfs. So an authorization event may go unnoticed. Thus make it easier
by informing the actual change (new value of authorized attribute) in
the udev change notification.
The change is included as a key value "authorized=<val>" where <val>
is the new value of sysfs attribute "authorized", and is described at
Documentation/ABI/testing/sysfs-bus-thunderbolt under
/sys/bus/thunderbolt/devices/.../authorized
Signed-off-by: Rajat Jain <[email protected]>
---
drivers/thunderbolt/switch.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c
index 83b1ef3d5d03..382128dfbdee 100644
--- a/drivers/thunderbolt/switch.c
+++ b/drivers/thunderbolt/switch.c
@@ -1499,6 +1499,7 @@ static ssize_t authorized_show(struct device *dev,
static int disapprove_switch(struct device *dev, void *not_used)
{
struct tb_switch *sw;
+ char *envp[] = { "AUTHORIZED=0", NULL };
sw = tb_to_switch(dev);
if (sw && sw->authorized) {
@@ -1514,7 +1515,7 @@ static int disapprove_switch(struct device *dev, void *not_used)
return ret;
sw->authorized = 0;
- kobject_uevent(&sw->dev.kobj, KOBJ_CHANGE);
+ kobject_uevent_env(&sw->dev.kobj, KOBJ_CHANGE, envp);
}
return 0;
@@ -1523,6 +1524,8 @@ static int disapprove_switch(struct device *dev, void *not_used)
static int tb_switch_set_authorized(struct tb_switch *sw, unsigned int val)
{
int ret = -EINVAL;
+ char envp_string[13];
+ char *envp[] = { envp_string, NULL };
if (!mutex_trylock(&sw->tb->lock))
return restart_syscall();
@@ -1560,7 +1563,8 @@ static int tb_switch_set_authorized(struct tb_switch *sw, unsigned int val)
if (!ret) {
sw->authorized = val;
/* Notify status change to the userspace */
- kobject_uevent(&sw->dev.kobj, KOBJ_CHANGE);
+ sprintf(envp_string, "AUTHORIZED=%u", sw->authorized);
+ kobject_uevent_env(&sw->dev.kobj, KOBJ_CHANGE, envp);
}
unlock:
--
2.32.0.432.gabb21c7263-goog
(fixing the typo in the email ID for Greg).
On Fri, Jul 23, 2021 at 5:40 PM Rajat Jain <[email protected]> wrote:
>
> For security, we would like to monitor and track when the thunderbolt
> devices are authorized and deauthorized (i.e. when the thunderbolt sysfs
> "authorized" attribute changes). Currently the userspace gets a udev
> change notification when there is a change, but the state may have
> changed (again) by the time we look at the authorized attribute in
> sysfs. So an authorization event may go unnoticed. Thus make it easier
> by informing the actual change (new value of authorized attribute) in
> the udev change notification.
>
> The change is included as a key value "authorized=<val>" where <val>
> is the new value of sysfs attribute "authorized", and is described at
> Documentation/ABI/testing/sysfs-bus-thunderbolt under
> /sys/bus/thunderbolt/devices/.../authorized
>
> Signed-off-by: Rajat Jain <[email protected]>
> ---
> drivers/thunderbolt/switch.c | 8 ++++++--
> 1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c
> index 83b1ef3d5d03..382128dfbdee 100644
> --- a/drivers/thunderbolt/switch.c
> +++ b/drivers/thunderbolt/switch.c
> @@ -1499,6 +1499,7 @@ static ssize_t authorized_show(struct device *dev,
> static int disapprove_switch(struct device *dev, void *not_used)
> {
> struct tb_switch *sw;
> + char *envp[] = { "AUTHORIZED=0", NULL };
>
> sw = tb_to_switch(dev);
> if (sw && sw->authorized) {
> @@ -1514,7 +1515,7 @@ static int disapprove_switch(struct device *dev, void *not_used)
> return ret;
>
> sw->authorized = 0;
> - kobject_uevent(&sw->dev.kobj, KOBJ_CHANGE);
> + kobject_uevent_env(&sw->dev.kobj, KOBJ_CHANGE, envp);
> }
>
> return 0;
> @@ -1523,6 +1524,8 @@ static int disapprove_switch(struct device *dev, void *not_used)
> static int tb_switch_set_authorized(struct tb_switch *sw, unsigned int val)
> {
> int ret = -EINVAL;
> + char envp_string[13];
> + char *envp[] = { envp_string, NULL };
>
> if (!mutex_trylock(&sw->tb->lock))
> return restart_syscall();
> @@ -1560,7 +1563,8 @@ static int tb_switch_set_authorized(struct tb_switch *sw, unsigned int val)
> if (!ret) {
> sw->authorized = val;
> /* Notify status change to the userspace */
> - kobject_uevent(&sw->dev.kobj, KOBJ_CHANGE);
> + sprintf(envp_string, "AUTHORIZED=%u", sw->authorized);
> + kobject_uevent_env(&sw->dev.kobj, KOBJ_CHANGE, envp);
> }
>
> unlock:
> --
> 2.32.0.432.gabb21c7263-goog
>
On Fri, Jul 23, 2021 at 05:40:43PM -0700, Rajat Jain wrote:
> For security, we would like to monitor and track when the thunderbolt
> devices are authorized and deauthorized (i.e. when the thunderbolt sysfs
> "authorized" attribute changes). Currently the userspace gets a udev
> change notification when there is a change, but the state may have
> changed (again) by the time we look at the authorized attribute in
> sysfs. So an authorization event may go unnoticed. Thus make it easier
> by informing the actual change (new value of authorized attribute) in
> the udev change notification.
>
> The change is included as a key value "authorized=<val>" where <val>
> is the new value of sysfs attribute "authorized", and is described at
> Documentation/ABI/testing/sysfs-bus-thunderbolt under
> /sys/bus/thunderbolt/devices/.../authorized
>
> Signed-off-by: Rajat Jain <[email protected]>
> ---
> drivers/thunderbolt/switch.c | 8 ++++++--
> 1 file changed, 6 insertions(+), 2 deletions(-)
Hi,
This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him
a patch that has triggered this response. He used to manually respond
to these common problems, but in order to save his sanity (he kept
writing the same thing over and over, yet to different people), I was
created. Hopefully you will not take offence and will fix the problem
in your patch and resubmit it so that it can be accepted into the Linux
kernel tree.
You are receiving this message because of the following common error(s)
as indicated below:
- This looks like a new version of a previously submitted patch, but you
did not list below the --- line any changes from the previous version.
Please read the section entitled "The canonical patch format" in the
kernel file, Documentation/SubmittingPatches for what needs to be done
here to properly describe this.
If you wish to discuss this problem further, or you have questions about
how to resolve this issue, please feel free to respond to this email and
Greg will reply once he has dug out from the pending patches received
from other developers.
thanks,
greg k-h's patch email bot
Hi Rajat,
On Fri, Jul 23, 2021 at 05:41:58PM -0700, Rajat Jain wrote:
> (fixing the typo in the email ID for Greg).
>
> On Fri, Jul 23, 2021 at 5:40 PM Rajat Jain <[email protected]> wrote:
> >
> > For security, we would like to monitor and track when the thunderbolt
> > devices are authorized and deauthorized (i.e. when the thunderbolt sysfs
> > "authorized" attribute changes). Currently the userspace gets a udev
> > change notification when there is a change, but the state may have
> > changed (again) by the time we look at the authorized attribute in
> > sysfs. So an authorization event may go unnoticed. Thus make it easier
> > by informing the actual change (new value of authorized attribute) in
> > the udev change notification.
> >
> > The change is included as a key value "authorized=<val>" where <val>
> > is the new value of sysfs attribute "authorized", and is described at
> > Documentation/ABI/testing/sysfs-bus-thunderbolt under
> > /sys/bus/thunderbolt/devices/.../authorized
Looking good, a couple of minor nits below.
> >
> > Signed-off-by: Rajat Jain <[email protected]>
> > ---
> > drivers/thunderbolt/switch.c | 8 ++++++--
> > 1 file changed, 6 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c
> > index 83b1ef3d5d03..382128dfbdee 100644
> > --- a/drivers/thunderbolt/switch.c
> > +++ b/drivers/thunderbolt/switch.c
> > @@ -1499,6 +1499,7 @@ static ssize_t authorized_show(struct device *dev,
> > static int disapprove_switch(struct device *dev, void *not_used)
> > {
> > struct tb_switch *sw;
> > + char *envp[] = { "AUTHORIZED=0", NULL };
Can you move arrange this to be before sw, like:
char *envp[] = { "AUTHORIZED=0", NULL };
struct tb_switch *sw;
> >
> > sw = tb_to_switch(dev);
> > if (sw && sw->authorized) {
> > @@ -1514,7 +1515,7 @@ static int disapprove_switch(struct device *dev, void *not_used)
> > return ret;
> >
> > sw->authorized = 0;
> > - kobject_uevent(&sw->dev.kobj, KOBJ_CHANGE);
> > + kobject_uevent_env(&sw->dev.kobj, KOBJ_CHANGE, envp);
> > }
> >
> > return 0;
> > @@ -1523,6 +1524,8 @@ static int disapprove_switch(struct device *dev, void *not_used)
> > static int tb_switch_set_authorized(struct tb_switch *sw, unsigned int val)
> > {
> > int ret = -EINVAL;
> > + char envp_string[13];
> > + char *envp[] = { envp_string, NULL };
Ditto.
> >
> > if (!mutex_trylock(&sw->tb->lock))
> > return restart_syscall();
> > @@ -1560,7 +1563,8 @@ static int tb_switch_set_authorized(struct tb_switch *sw, unsigned int val)
> > if (!ret) {
> > sw->authorized = val;
> > /* Notify status change to the userspace */
> > - kobject_uevent(&sw->dev.kobj, KOBJ_CHANGE);
> > + sprintf(envp_string, "AUTHORIZED=%u", sw->authorized);
> > + kobject_uevent_env(&sw->dev.kobj, KOBJ_CHANGE, envp);
> > }
> >
> > unlock:
> > --
> > 2.32.0.432.gabb21c7263-goog
> >
On Mon, Jul 26, 2021 at 6:40 AM Mika Westerberg
<[email protected]> wrote:
>
> Hi Rajat,
>
> On Fri, Jul 23, 2021 at 05:41:58PM -0700, Rajat Jain wrote:
> > (fixing the typo in the email ID for Greg).
> >
> > On Fri, Jul 23, 2021 at 5:40 PM Rajat Jain <[email protected]> wrote:
> > >
> > > For security, we would like to monitor and track when the thunderbolt
> > > devices are authorized and deauthorized (i.e. when the thunderbolt sysfs
> > > "authorized" attribute changes). Currently the userspace gets a udev
> > > change notification when there is a change, but the state may have
> > > changed (again) by the time we look at the authorized attribute in
> > > sysfs. So an authorization event may go unnoticed. Thus make it easier
> > > by informing the actual change (new value of authorized attribute) in
> > > the udev change notification.
> > >
> > > The change is included as a key value "authorized=<val>" where <val>
> > > is the new value of sysfs attribute "authorized", and is described at
> > > Documentation/ABI/testing/sysfs-bus-thunderbolt under
> > > /sys/bus/thunderbolt/devices/.../authorized
>
> Looking good, a couple of minor nits below.
>
> > >
> > > Signed-off-by: Rajat Jain <[email protected]>
> > > ---
> > > drivers/thunderbolt/switch.c | 8 ++++++--
> > > 1 file changed, 6 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c
> > > index 83b1ef3d5d03..382128dfbdee 100644
> > > --- a/drivers/thunderbolt/switch.c
> > > +++ b/drivers/thunderbolt/switch.c
> > > @@ -1499,6 +1499,7 @@ static ssize_t authorized_show(struct device *dev,
> > > static int disapprove_switch(struct device *dev, void *not_used)
> > > {
> > > struct tb_switch *sw;
> > > + char *envp[] = { "AUTHORIZED=0", NULL };
>
> Can you move arrange this to be before sw, like:
Done.
>
> char *envp[] = { "AUTHORIZED=0", NULL };
> struct tb_switch *sw;
>
> > >
> > > sw = tb_to_switch(dev);
> > > if (sw && sw->authorized) {
> > > @@ -1514,7 +1515,7 @@ static int disapprove_switch(struct device *dev, void *not_used)
> > > return ret;
> > >
> > > sw->authorized = 0;
> > > - kobject_uevent(&sw->dev.kobj, KOBJ_CHANGE);
> > > + kobject_uevent_env(&sw->dev.kobj, KOBJ_CHANGE, envp);
> > > }
> > >
> > > return 0;
> > > @@ -1523,6 +1524,8 @@ static int disapprove_switch(struct device *dev, void *not_used)
> > > static int tb_switch_set_authorized(struct tb_switch *sw, unsigned int val)
> > > {
> > > int ret = -EINVAL;
> > > + char envp_string[13];
> > > + char *envp[] = { envp_string, NULL };
>
> Ditto.
Done. I still needed to define envp_string before envp (because it is
used in initialization).
I sent out a v3 with these changes.
Thanks,
Rajat
>
> > >
> > > if (!mutex_trylock(&sw->tb->lock))
> > > return restart_syscall();
> > > @@ -1560,7 +1563,8 @@ static int tb_switch_set_authorized(struct tb_switch *sw, unsigned int val)
> > > if (!ret) {
> > > sw->authorized = val;
> > > /* Notify status change to the userspace */
> > > - kobject_uevent(&sw->dev.kobj, KOBJ_CHANGE);
> > > + sprintf(envp_string, "AUTHORIZED=%u", sw->authorized);
> > > + kobject_uevent_env(&sw->dev.kobj, KOBJ_CHANGE, envp);
> > > }
> > >
> > > unlock:
> > > --
> > > 2.32.0.432.gabb21c7263-goog
> > >