2021-10-14 11:20:39

by Greg Kroah-Hartman

Subject: [PATCH] ALSA: usb-audio: add Schiit Hel device to quirk table

The Shciit Hel device responds to the ctl message for the mic capture
switch with a timeout of -EPIPE:

usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1
usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1
usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1
usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1

This seems safe to ignore as the device works properly with the control
message quirk, so add it to the quirk table so all is good.

Cc: Jaroslav Kysela <[email protected]>
Cc: Takashi Iwai <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/quirks.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 6ee6d24c847f..ec11be366dc0 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1884,6 +1884,8 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = {
QUIRK_FLAG_GET_SAMPLE_RATE),
DEVICE_FLG(0x2912, 0x30c8, /* Audioengine D1 */
QUIRK_FLAG_GET_SAMPLE_RATE),
+ DEVICE_FLG(0x30be, 0x0101, /* Schiit Hel */
+ QUIRK_FLAG_IGNORE_CTL_ERROR),
DEVICE_FLG(0x413c, 0xa506, /* Dell AE515 sound bar */
QUIRK_FLAG_GET_SAMPLE_RATE),
DEVICE_FLG(0x534d, 0x2109, /* MacroSilicon MS2109 */
--
2.33.0

2021-10-14 14:56:23

by Takashi Iwai

Subject: Re: [PATCH] ALSA: usb-audio: add Schiit Hel device to quirk table

On Thu, 14 Oct 2021 13:17:50 +0200,
Greg Kroah-Hartman wrote:
>
> The Shciit Hel device responds to the ctl message for the mic capture
> switch with a timeout of -EPIPE:
>
> usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1
> usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1
> usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1
> usb 7-2.2: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x1100, type = 1
>
> This seems safe to ignore as the device works properly with the control
> message quirk, so add it to the quirk table so all is good.
>
> Cc: Jaroslav Kysela <[email protected]>
> Cc: Takashi Iwai <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Signed-off-by: Greg Kroah-Hartman <[email protected]>

Thanks, applied now.


Takashi