From: Luiz Angelo Daros de Luca <[email protected]>
This switch family can have up to 8 ports {0..7}. However,
INDIRECT_ACCESS_ADDRESS_PHYNUM_MASK was using 2 bits instead of 3,
dropping the most significant bit during indirect register reads and
writes. Reading or writing ports 5, 6, and 7 registers was actually
manipulating, respectively, ports 0, 1, and 2 registers.
rtl8365mb_phy_{read,write} will now returns -EINVAL if phy is greater
than 7.
Fixes: 4af2950c50c8 ("net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC")
Signed-off-by: Luiz Angelo Daros de Luca <[email protected]>
---
drivers/net/dsa/rtl8365mb.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/dsa/rtl8365mb.c b/drivers/net/dsa/rtl8365mb.c
index baaae97283c5..f4414ac74b61 100644
--- a/drivers/net/dsa/rtl8365mb.c
+++ b/drivers/net/dsa/rtl8365mb.c
@@ -107,6 +107,7 @@
#define RTL8365MB_LEARN_LIMIT_MAX_8365MB_VC 2112
/* Family-specific data and limits */
+#define RTL8365MB_PHYADDRMAX 7
#define RTL8365MB_NUM_PHYREGS 32
#define RTL8365MB_PHYREGMAX (RTL8365MB_NUM_PHYREGS - 1)
#define RTL8365MB_MAX_NUM_PORTS (RTL8365MB_CPU_PORT_NUM_8365MB_VC + 1)
@@ -176,7 +177,7 @@
#define RTL8365MB_INDIRECT_ACCESS_STATUS_REG 0x1F01
#define RTL8365MB_INDIRECT_ACCESS_ADDRESS_REG 0x1F02
#define RTL8365MB_INDIRECT_ACCESS_ADDRESS_OCPADR_5_1_MASK GENMASK(4, 0)
-#define RTL8365MB_INDIRECT_ACCESS_ADDRESS_PHYNUM_MASK GENMASK(6, 5)
+#define RTL8365MB_INDIRECT_ACCESS_ADDRESS_PHYNUM_MASK GENMASK(7, 5)
#define RTL8365MB_INDIRECT_ACCESS_ADDRESS_OCPADR_9_6_MASK GENMASK(11, 8)
#define RTL8365MB_PHY_BASE 0x2000
#define RTL8365MB_INDIRECT_ACCESS_WRITE_DATA_REG 0x1F03
@@ -679,6 +680,8 @@ static int rtl8365mb_phy_read(struct realtek_smi *smi, int phy, int regnum)
u16 val;
int ret;
+ if (phy > RTL8365MB_PHYADDRMAX)
+ return -EINVAL;
if (regnum > RTL8365MB_PHYREGMAX)
return -EINVAL;
@@ -704,6 +707,8 @@ static int rtl8365mb_phy_write(struct realtek_smi *smi, int phy, int regnum,
u32 ocp_addr;
int ret;
+ if (phy > RTL8365MB_PHYADDRMAX)
+ return -EINVAL;
if (regnum > RTL8365MB_PHYREGMAX)
return -EINVAL;
--
2.33.1
From: Luiz Angelo Daros de Luca <[email protected]>
This switch family can have up to 8 ports {0..7}. However,
INDIRECT_ACCESS_ADDRESS_PHYNUM_MASK was using 2 bits instead of 3,
dropping the most significant bit during indirect register reads and
writes. Reading or writing ports 4, 5, 6, and 7 registers was actually
manipulating, respectively, ports 0, 1, 2, and 3 registers.
rtl8365mb_phy_{read,write} will now returns -EINVAL if phy is greater
than 7.
v2:
- fix affected ports in commit message
Fixes: 4af2950c50c8 ("net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC")
Signed-off-by: Luiz Angelo Daros de Luca <[email protected]>
---
drivers/net/dsa/rtl8365mb.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/dsa/rtl8365mb.c b/drivers/net/dsa/rtl8365mb.c
index baaae97283c5..f4414ac74b61 100644
--- a/drivers/net/dsa/rtl8365mb.c
+++ b/drivers/net/dsa/rtl8365mb.c
@@ -107,6 +107,7 @@
#define RTL8365MB_LEARN_LIMIT_MAX_8365MB_VC 2112
/* Family-specific data and limits */
+#define RTL8365MB_PHYADDRMAX 7
#define RTL8365MB_NUM_PHYREGS 32
#define RTL8365MB_PHYREGMAX (RTL8365MB_NUM_PHYREGS - 1)
#define RTL8365MB_MAX_NUM_PORTS (RTL8365MB_CPU_PORT_NUM_8365MB_VC + 1)
@@ -176,7 +177,7 @@
#define RTL8365MB_INDIRECT_ACCESS_STATUS_REG 0x1F01
#define RTL8365MB_INDIRECT_ACCESS_ADDRESS_REG 0x1F02
#define RTL8365MB_INDIRECT_ACCESS_ADDRESS_OCPADR_5_1_MASK GENMASK(4, 0)
-#define RTL8365MB_INDIRECT_ACCESS_ADDRESS_PHYNUM_MASK GENMASK(6, 5)
+#define RTL8365MB_INDIRECT_ACCESS_ADDRESS_PHYNUM_MASK GENMASK(7, 5)
#define RTL8365MB_INDIRECT_ACCESS_ADDRESS_OCPADR_9_6_MASK GENMASK(11, 8)
#define RTL8365MB_PHY_BASE 0x2000
#define RTL8365MB_INDIRECT_ACCESS_WRITE_DATA_REG 0x1F03
@@ -679,6 +680,8 @@ static int rtl8365mb_phy_read(struct realtek_smi *smi, int phy, int regnum)
u16 val;
int ret;
+ if (phy > RTL8365MB_PHYADDRMAX)
+ return -EINVAL;
if (regnum > RTL8365MB_PHYREGMAX)
return -EINVAL;
@@ -704,6 +707,8 @@ static int rtl8365mb_phy_write(struct realtek_smi *smi, int phy, int regnum,
u32 ocp_addr;
int ret;
+ if (phy > RTL8365MB_PHYADDRMAX)
+ return -EINVAL;
if (regnum > RTL8365MB_PHYREGMAX)
return -EINVAL;
--
2.33.1
On Fri, Nov 26, 2021 at 05:12:52AM -0300, [email protected] wrote:
> From: Luiz Angelo Daros de Luca <[email protected]>
>
> This switch family can have up to 8 ports {0..7}. However,
> INDIRECT_ACCESS_ADDRESS_PHYNUM_MASK was using 2 bits instead of 3,
> dropping the most significant bit during indirect register reads and
> writes. Reading or writing ports 4, 5, 6, and 7 registers was actually
> manipulating, respectively, ports 0, 1, 2, and 3 registers.
>
> rtl8365mb_phy_{read,write} will now returns -EINVAL if phy is greater
> than 7.
>
> v2:
> - fix affected ports in commit message
>
> Fixes: 4af2950c50c8 ("net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC")
> Signed-off-by: Luiz Angelo Daros de Luca <[email protected]>
> ---
> drivers/net/dsa/rtl8365mb.c | 7 ++++++-
> 1 file changed, 6 insertions(+), 1 deletion(-)
<formletter>
This is not the correct way to submit patches for inclusion in the
stable kernel tree. Please read:
https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html
for how to do this properly.
</formletter>
Hi Luiz,
Thanks for your patch.
You needn't cc the stable list, since rtl8365mb doesn't exist in any
stable release just yet. If you send a v3, just target net:
[PATCH net v3] net: dsa: ...
Then the fix will land in 5.16. :-)
On 11/26/21 09:12, [email protected] wrote:
> From: Luiz Angelo Daros de Luca <[email protected]>
>
> This switch family can have up to 8 ports {0..7}. However,
> INDIRECT_ACCESS_ADDRESS_PHYNUM_MASK was using 2 bits instead of 3,
> dropping the most significant bit during indirect register reads and
> writes. Reading or writing ports 4, 5, 6, and 7 registers was actually
> manipulating, respectively, ports 0, 1, 2, and 3 registers.
Nice catch. Out of curiosity can you share what switch you are testing?
So far the driver only advertises support for RTL8365MB-VC. Since that
switch only uses PHY addresses 0~3, it shouldn't be affected by a
narrower (2-bit) PHYNUM_MASK, right? Are you able to add words to the
effect of "... now this fixes the driver to work with RTL83xxxx"?
The change is OK except for some comments below:
>
> rtl8365mb_phy_{read,write} will now returns -EINVAL if phy is greater
> than 7.
I don't think this is really necessary: a valid (device tree)
configuration should never specify a PHY with address greater than 7. Or
am I missing something?
>
> v2:
> - fix affected ports in commit message
The changelog shouldn't end up in the final commit message - please move
it out in v3.
>
> Fixes: 4af2950c50c8 ("net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC")
> Signed-off-by: Luiz Angelo Daros de Luca <[email protected]>
> ---
> drivers/net/dsa/rtl8365mb.c | 7 ++++++-
> 1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/dsa/rtl8365mb.c b/drivers/net/dsa/rtl8365mb.c
> index baaae97283c5..f4414ac74b61 100644
> --- a/drivers/net/dsa/rtl8365mb.c
> +++ b/drivers/net/dsa/rtl8365mb.c
> @@ -107,6 +107,7 @@
> #define RTL8365MB_LEARN_LIMIT_MAX_8365MB_VC 2112
>
> /* Family-specific data and limits */
> +#define RTL8365MB_PHYADDRMAX 7
> #define RTL8365MB_NUM_PHYREGS 32
> #define RTL8365MB_PHYREGMAX (RTL8365MB_NUM_PHYREGS - 1)
> #define RTL8365MB_MAX_NUM_PORTS (RTL8365MB_CPU_PORT_NUM_8365MB_VC + 1)
> @@ -176,7 +177,7 @@
> #define RTL8365MB_INDIRECT_ACCESS_STATUS_REG 0x1F01
> #define RTL8365MB_INDIRECT_ACCESS_ADDRESS_REG 0x1F02
> #define RTL8365MB_INDIRECT_ACCESS_ADDRESS_OCPADR_5_1_MASK GENMASK(4, 0)
> -#define RTL8365MB_INDIRECT_ACCESS_ADDRESS_PHYNUM_MASK GENMASK(6, 5)
> +#define RTL8365MB_INDIRECT_ACCESS_ADDRESS_PHYNUM_MASK GENMASK(7, 5)
> #define RTL8365MB_INDIRECT_ACCESS_ADDRESS_OCPADR_9_6_MASK GENMASK(11, 8)
> #define RTL8365MB_PHY_BASE 0x2000
> #define RTL8365MB_INDIRECT_ACCESS_WRITE_DATA_REG 0x1F03
> @@ -679,6 +680,8 @@ static int rtl8365mb_phy_read(struct realtek_smi *smi, int phy, int regnum)
> u16 val;
> int ret;
>
> + if (phy > RTL8365MB_PHYADDRMAX)
> + return -EINVAL;
> if (regnum > RTL8365MB_PHYREGMAX)
If you decide to keep these check, please add a newline after your returns.
> return -EINVAL;
>
> @@ -704,6 +707,8 @@ static int rtl8365mb_phy_write(struct realtek_smi *smi, int phy, int regnum,
> u32 ocp_addr;
> int ret;
>
> + if (phy > RTL8365MB_PHYADDRMAX)
> + return -EINVAL;
> if (regnum > RTL8365MB_PHYREGMAX)
> return -EINVAL;
>
>