Hi,
Changes since v2
================
1. DTS patch: drop, applied.
2. Regulator: do not require regulator-names.
3. Add tags.
Changes since v1
================
1. MFD: Use absolute path to schemas.
2. Regulator: skip properties.
Dependencies
============
1. DTS patch: nothing depends on it, sending here so Rob's automatic
checker won't complain about DTS.
I will take it via Samsung SoC tree.
2. Final MFD patch depends on regulator, so the two last patches could
go via Rob's, Mark's or Lee's trees.
Best regards,
Krzysztof
Krzysztof Kozlowski (2):
regulator: dt-bindings: maxim,max77802: convert to dtschema
dt-bindings: mfd: maxim,max77802: convert to dtschema
.../devicetree/bindings/mfd/max77802.txt | 25 ---
.../bindings/mfd/maxim,max77802.yaml | 194 ++++++++++++++++++
.../bindings/regulator/max77802.txt | 111 ----------
.../bindings/regulator/maxim,max77802.yaml | 85 ++++++++
MAINTAINERS | 2 +-
5 files changed, 280 insertions(+), 137 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/mfd/max77802.txt
create mode 100644 Documentation/devicetree/bindings/mfd/maxim,max77802.yaml
delete mode 100644 Documentation/devicetree/bindings/regulator/max77802.txt
create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max77802.yaml
--
2.32.0
Convert the MFD part of Maxim MAX77802 PMIC to DT schema format. The
example DTS was copied from existing DTS (exynos5800-peach-pi.dts), so
keep the license as GPL-2.0-only.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
---
.../devicetree/bindings/mfd/max77802.txt | 25 ---
.../bindings/mfd/maxim,max77802.yaml | 194 ++++++++++++++++++
MAINTAINERS | 2 +-
3 files changed, 195 insertions(+), 26 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/mfd/max77802.txt
create mode 100644 Documentation/devicetree/bindings/mfd/maxim,max77802.yaml
diff --git a/Documentation/devicetree/bindings/mfd/max77802.txt b/Documentation/devicetree/bindings/mfd/max77802.txt
deleted file mode 100644
index 09decac20d91..000000000000
--- a/Documentation/devicetree/bindings/mfd/max77802.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Maxim MAX77802 multi-function device
-
-The Maxim MAX77802 is a Power Management IC (PMIC) that contains 10 high
-efficiency Buck regulators, 32 Low-DropOut (LDO) regulators used to power
-up application processors and peripherals, a 2-channel 32kHz clock outputs,
-a Real-Time-Clock (RTC) and a I2C interface to program the individual
-regulators, clocks outputs and the RTC.
-
-Bindings for the built-in 32k clock generator block and
-regulators are defined in ../clk/maxim,max77802.txt and
-../regulator/max77802.txt respectively.
-
-Required properties:
-- compatible : Must be "maxim,max77802"
-- reg : Specifies the I2C slave address of PMIC block.
-- interrupts : I2C device IRQ line connected to the main SoC.
-
-Example:
-
- max77802: pmic@9 {
- compatible = "maxim,max77802";
- interrupt-parent = <&intc>;
- interrupts = <26 IRQ_TYPE_NONE>;
- reg = <0x09>;
- };
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77802.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77802.yaml
new file mode 100644
index 000000000000..baa1346ac5d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/maxim,max77802.yaml
@@ -0,0 +1,194 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max77802.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77802 Power Management IC
+
+maintainers:
+ - Javier Martinez Canillas <[email protected]>
+ - Krzysztof Kozlowski <[email protected]>
+
+description: |
+ This is a part of device tree bindings for Maxim MAX77802 Power Management
+ Integrated Circuit (PMIC).
+
+ The Maxim MAX77802 is a Power Management IC which includes voltage and
+ current regulators (10 high efficiency Buck regulators and 32 Low-DropOut
+ (LDO)), RTC and clock outputs.
+
+ The MAX77802 provides two 32.768khz clock outputs that can be controlled
+ (gated/ungated) over I2C. The clock IDs are defined as preprocessor macros
+ in dt-bindings/clock/maxim,max77802.h.
+
+properties:
+ compatible:
+ const: maxim,max77802
+
+ '#clock-cells':
+ const: 1
+
+ interrupts:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+ regulators:
+ $ref: /schemas/regulator/maxim,max77802.yaml
+ description:
+ List of child nodes that specify the regulators.
+
+ inb1-supply:
+ description: Power supply for buck1
+ inb2-supply:
+ description: Power supply for buck2
+ inb3-supply:
+ description: Power supply for buck3
+ inb4-supply:
+ description: Power supply for buck4
+ inb5-supply:
+ description: Power supply for buck5
+ inb6-supply:
+ description: Power supply for buck6
+ inb7-supply:
+ description: Power supply for buck7
+ inb8-supply:
+ description: Power supply for buck8
+ inb9-supply:
+ description: Power supply for buck9
+ inb10-supply:
+ description: Power supply for buck10
+
+ inl1-supply:
+ description: Power supply for LDO8, LDO15
+ inl2-supply:
+ description: Power supply for LDO17, LDO27, LDO30, LDO35
+ inl3-supply:
+ description: Power supply for LDO3, LDO5, LDO7, LDO7
+ inl4-supply:
+ description: Power supply for LDO10, LDO11, LDO13, LDO14
+ inl5-supply:
+ description: Power supply for LDO9, LDO19
+ inl6-supply:
+ description: Power supply for LDO4, LDO21, LDO24, LDO33
+ inl7-supply:
+ description: Power supply for LDO18, LDO20, LDO28, LDO29
+ inl9-supply:
+ description: Power supply for LDO12, LDO23, LDO25, LDO26, LDO32, LDO34
+ inl10-supply:
+ description: Power supply for LDO1, LDO2
+
+ wakeup-source: true
+
+required:
+ - compatible
+ - '#clock-cells'
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/regulator/maxim,max77802.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@9 {
+ compatible = "maxim,max77802";
+ interrupt-parent = <&gpx3>;
+ interrupts = <1 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
+ <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>;
+ wakeup-source;
+ reg = <0x9>;
+ #clock-cells = <1>;
+
+ inb1-supply = <&tps65090_dcdc2>;
+ inb2-supply = <&tps65090_dcdc1>;
+ inb3-supply = <&tps65090_dcdc2>;
+ inb4-supply = <&tps65090_dcdc2>;
+ inb5-supply = <&tps65090_dcdc1>;
+ inb6-supply = <&tps65090_dcdc2>;
+ inb7-supply = <&tps65090_dcdc1>;
+ inb8-supply = <&tps65090_dcdc1>;
+ inb9-supply = <&tps65090_dcdc1>;
+ inb10-supply = <&tps65090_dcdc1>;
+
+ inl1-supply = <&buck5_reg>;
+ inl2-supply = <&buck7_reg>;
+ inl3-supply = <&buck9_reg>;
+ inl4-supply = <&buck9_reg>;
+ inl5-supply = <&buck9_reg>;
+ inl6-supply = <&tps65090_dcdc2>;
+ inl7-supply = <&buck9_reg>;
+ inl9-supply = <&tps65090_dcdc2>;
+ inl10-supply = <&buck7_reg>;
+
+ regulators {
+ BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-ramp-delay = <12500>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-ramp-delay = <12500>;
+ regulator-coupled-with = <&buck3_reg>;
+ regulator-coupled-max-spread = <300000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ // ...
+
+ BUCK10 {
+ regulator-name = "vdd_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ LDO1 {
+ regulator-name = "vdd_1v0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-initial-mode = <MAX77802_OPMODE_NORMAL>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-mode = <MAX77802_OPMODE_LP>;
+ };
+ };
+
+ // ...
+
+ LDO35 {
+ regulator-name = "ldo_35";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ };
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index ad66530bcbe2..6783a9dc85a5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11825,7 +11825,7 @@ MAXIM MAX77802 PMIC REGULATOR DEVICE DRIVER
M: Javier Martinez Canillas <[email protected]>
L: [email protected]
S: Supported
-F: Documentation/devicetree/bindings/*/*max77802.txt
+F: Documentation/devicetree/bindings/*/*max77802.yaml
F: drivers/regulator/max77802-regulator.c
F: include/dt-bindings/*/*max77802.h
--
2.32.0
Convert the regulators of Maxim MAX77802 PMIC to DT schema format.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Acked-by: Mark Brown <[email protected]>
---
.../bindings/regulator/max77802.txt | 111 ------------------
.../bindings/regulator/maxim,max77802.yaml | 85 ++++++++++++++
2 files changed, 85 insertions(+), 111 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/regulator/max77802.txt
create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max77802.yaml
diff --git a/Documentation/devicetree/bindings/regulator/max77802.txt b/Documentation/devicetree/bindings/regulator/max77802.txt
deleted file mode 100644
index b82943d83677..000000000000
--- a/Documentation/devicetree/bindings/regulator/max77802.txt
+++ /dev/null
@@ -1,111 +0,0 @@
-Binding for Maxim MAX77802 regulators
-
-This is a part of device tree bindings of MAX77802 multi-function device.
-More information can be found in bindings/mfd/max77802.txt file.
-
-The MAX77802 PMIC has 10 high-efficiency Buck and 32 Low-dropout (LDO)
-regulators that can be controlled over I2C.
-
-Following properties should be present in main device node of the MFD chip.
-
-Optional properties:
-- inb1-supply: The input supply for BUCK1
-- inb2-supply: The input supply for BUCK2
-- inb3-supply: The input supply for BUCK3
-- inb4-supply: The input supply for BUCK4
-- inb5-supply: The input supply for BUCK5
-- inb6-supply: The input supply for BUCK6
-- inb7-supply: The input supply for BUCK7
-- inb8-supply: The input supply for BUCK8
-- inb9-supply: The input supply for BUCK9
-- inb10-supply: The input supply for BUCK10
-- inl1-supply: The input supply for LDO8 and LDO15
-- inl2-supply: The input supply for LDO17, LDO27, LDO30 and LDO35
-- inl3-supply: The input supply for LDO3, LDO5, LDO6 and LDO7
-- inl4-supply: The input supply for LDO10, LDO11, LDO13 and LDO14
-- inl5-supply: The input supply for LDO9 and LDO19
-- inl6-supply: The input supply for LDO4, LDO21, LDO24 and LDO33
-- inl7-supply: The input supply for LDO18, LDO20, LDO28 and LDO29
-- inl9-supply: The input supply for LDO12, LDO23, LDO25, LDO26, LDO32 and LDO34
-- inl10-supply: The input supply for LDO1 and LDO2
-
-Optional nodes:
-- regulators : The regulators of max77802 have to be instantiated
- under subnode named "regulators" using the following format.
-
- regulator-name {
- standard regulator constraints....
- };
- refer Documentation/devicetree/bindings/regulator/regulator.txt
-
-The regulator node name should be initialized with a string to get matched
-with their hardware counterparts as follow. The valid names are:
-
- -LDOn : for LDOs, where n can lie in ranges 1-15, 17-21, 23-30
- and 32-35.
- example: LDO1, LDO2, LDO35.
- -BUCKn : for BUCKs, where n can lie in range 1 to 10.
- example: BUCK1, BUCK5, BUCK10.
-
-The max77802 regulator supports two different operating modes: Normal and Low
-Power Mode. Some regulators support the modes to be changed at startup or by
-the consumers during normal operation while others only support to change the
-mode during system suspend. The standard regulator suspend states binding can
-be used to configure the regulator operating mode.
-
-The regulators that support the standard "regulator-initial-mode" property,
-changing their mode during normal operation are: LDOs 1, 3, 20 and 21.
-
-The possible values for "regulator-initial-mode" and "regulator-mode" are:
- 1: Normal regulator voltage output mode.
- 3: Low Power which reduces the quiescent current down to only 1uA
-
-The valid modes list is defined in the dt-bindings/regulator/maxim,max77802.h
-header and can be included by device tree source files.
-
-The standard "regulator-mode" property can only be used for regulators that
-support changing their mode to Low Power Mode during suspend. These regulators
-are: BUCKs 2-4 and LDOs 1-35. Also, it only takes effect if the regulator has
-been enabled for the given suspend state using "regulator-on-in-suspend" and
-has not been disabled for that state using "regulator-off-in-suspend".
-
-Example:
-
- max77802@9 {
- compatible = "maxim,max77802";
- interrupt-parent = <&wakeup_eint>;
- interrupts = <26 0>;
- reg = <0x09>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- inb1-supply = <&parent_reg>;
-
- regulators {
- ldo1_reg: LDO1 {
- regulator-name = "vdd_1v0";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-initial-mode = <MAX77802_OPMODE_LP>;
- };
-
- ldo11_reg: LDO11 {
- regulator-name = "vdd_ldo11";
- regulator-min-microvolt = <1900000>;
- regulator-max-microvolt = <1900000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-mode = <MAX77802_OPMODE_LP>;
- };
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
- };
diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77802.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77802.yaml
new file mode 100644
index 000000000000..f2b4dd15a0f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/maxim,max77802.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max77802.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77802 Power Management IC regulators
+
+maintainers:
+ - Javier Martinez Canillas <[email protected]>
+ - Krzysztof Kozlowski <[email protected]>
+
+description: |
+ This is a part of device tree bindings for Maxim MAX77802 Power Management
+ Integrated Circuit (PMIC).
+
+ The Maxim MAX77686 provides 10 high-efficiency Buck and 32 Low-DropOut (LDO)
+ regulators.
+
+ See also Documentation/devicetree/bindings/mfd/maxim,max77802.yaml for
+ additional information and example.
+
+ Certain regulators support "regulator-initial-mode" and "regulator-mode".
+ The valid modes list is defined in the dt-bindings/regulator/maxim,max77802.h
+ and their meaning is::
+ 1 - Normal regulator voltage output mode.
+ 3 - Low Power which reduces the quiescent current down to only 1uA
+
+ The standard "regulator-mode" property can only be used for regulators that
+ support changing their mode to Low Power Mode during suspend. These
+ regulators are:: bucks 2-4 and LDOs 1-35. Also, it only takes effect if the
+ regulator has been enabled for the given suspend state using
+ "regulator-on-in-suspend" and has not been disabled for that state using
+ "regulator-off-in-suspend".
+
+patternProperties:
+ # LDO1, LDO3, LDO20, LDO21
+ "^LDO([13]|2[01])$":
+ type: object
+ $ref: regulator.yaml#
+ unevaluatedProperties: false
+ description:
+ LDOs supporting the regulator-initial-mode property and changing their
+ mode during normal operation.
+
+ # LDO2, LDO4-15, LDO17-19, LDO23-30, LDO32-35
+ "^LDO([24-9]|1[0-5789]|2[3-9]|3[02345])$":
+ type: object
+ $ref: regulator.yaml#
+ unevaluatedProperties: false
+ description:
+ LDOs supporting the regulator-mode property (changing mode to Low Power
+ Mode during suspend).
+
+ properties:
+ regulator-initial-mode: false
+
+ # buck2-4
+ "^BUCK[2-4]$":
+ type: object
+ $ref: regulator.yaml#
+ unevaluatedProperties: false
+ description:
+ bucks supporting the regulator-mode property (changing mode to Low Power
+ Mode during suspend).
+
+ properties:
+ regulator-initial-mode: false
+
+ # buck1, buck5-10
+ "^BUCK([15-9]|10)$":
+ type: object
+ $ref: regulator.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ regulator-initial-mode: false
+
+ patternProperties:
+ regulator-state-(standby|mem|disk):
+ type: object
+ properties:
+ regulator-mode: false
+
+additionalProperties: false
--
2.32.0
On 15/02/2022 08:53, Krzysztof Kozlowski wrote:
> Hi,
>
Hi Lee,
This set also looks like it is clear to go.
Best regards,
Krzysztof
> Changes since v2
> ================
> 1. DTS patch: drop, applied.
> 2. Regulator: do not require regulator-names.
> 3. Add tags.
>
> Changes since v1
> ================
> 1. MFD: Use absolute path to schemas.
> 2. Regulator: skip properties.
>
> Dependencies
> ============
> 1. DTS patch: nothing depends on it, sending here so Rob's automatic
> checker won't complain about DTS.
> I will take it via Samsung SoC tree.
>
> 2. Final MFD patch depends on regulator, so the two last patches could
> go via Rob's, Mark's or Lee's trees.
>
> Best regards,
> Krzysztof
>
> Krzysztof Kozlowski (2):
> regulator: dt-bindings: maxim,max77802: convert to dtschema
> dt-bindings: mfd: maxim,max77802: convert to dtschema
>
> .../devicetree/bindings/mfd/max77802.txt | 25 ---
> .../bindings/mfd/maxim,max77802.yaml | 194 ++++++++++++++++++
> .../bindings/regulator/max77802.txt | 111 ----------
> .../bindings/regulator/maxim,max77802.yaml | 85 ++++++++
> MAINTAINERS | 2 +-
> 5 files changed, 280 insertions(+), 137 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/mfd/max77802.txt
> create mode 100644 Documentation/devicetree/bindings/mfd/maxim,max77802.yaml
> delete mode 100644 Documentation/devicetree/bindings/regulator/max77802.txt
> create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max77802.yaml
>
On Wed, 02 Mar 2022, Krzysztof Kozlowski wrote:
> On 15/02/2022 08:53, Krzysztof Kozlowski wrote:
> > Hi,
> >
>
> Hi Lee,
>
> This set also looks like it is clear to go.
Yes, they're all on-the-list.
I'll probably take them all into one branch and send out a PR.
Making 24 separate immutable branches is beyond my pay scale!
--
Lee Jones [李琼斯]
Principal Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
On Tue, 15 Feb 2022, Krzysztof Kozlowski wrote:
> Convert the regulators of Maxim MAX77802 PMIC to DT schema format.
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
> Reviewed-by: Rob Herring <[email protected]>
> Reviewed-by: Javier Martinez Canillas <[email protected]>
> Acked-by: Mark Brown <[email protected]>
> ---
> .../bindings/regulator/max77802.txt | 111 ------------------
> .../bindings/regulator/maxim,max77802.yaml | 85 ++++++++++++++
> 2 files changed, 85 insertions(+), 111 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/regulator/max77802.txt
> create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max77802.yaml
Applied, thanks.
--
Lee Jones [李琼斯]
Principal Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
On Tue, 15 Feb 2022, Krzysztof Kozlowski wrote:
> Convert the MFD part of Maxim MAX77802 PMIC to DT schema format. The
> example DTS was copied from existing DTS (exynos5800-peach-pi.dts), so
> keep the license as GPL-2.0-only.
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
> Reviewed-by: Rob Herring <[email protected]>
> Reviewed-by: Javier Martinez Canillas <[email protected]>
> ---
> .../devicetree/bindings/mfd/max77802.txt | 25 ---
> .../bindings/mfd/maxim,max77802.yaml | 194 ++++++++++++++++++
> MAINTAINERS | 2 +-
> 3 files changed, 195 insertions(+), 26 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/mfd/max77802.txt
> create mode 100644 Documentation/devicetree/bindings/mfd/maxim,max77802.yaml
Applied, thanks.
--
Lee Jones [李琼斯]
Principal Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
[correct subject line this time]
Enjoy!
The following changes since commit e783362eb54cd99b2cac8b3a9aeac942e6f6ac07:
Linux 5.17-rc1 (2022-01-23 10:12:53 +0200)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git ib-mfd-spi-dt-v5.18
for you to fetch changes up to 172e611b54e813c49a35b6b74bccaa99f27bf566:
dt-bindings: mfd: maxim,max77802: Convert to dtschema (2022-03-07 12:55:59 +0000)
----------------------------------------------------------------
Immutable branch between MFD, SPI and DT due for the v5.18 merge window
----------------------------------------------------------------
Krzysztof Kozlowski (13):
dt-bindings: extcon: maxim,max77843: Add MAX77843 bindings
regulator: dt-bindings: maxim,max77843: Add MAX77843 bindings
dt-bindings: mfd: maxim,max77843: Add MAX77843 bindings
MAINTAINERS: mfd: Cover MAX77843 by Maxim PMIC/MUIC for Exynos boards entry
spi: dt-bindings: samsung: Convert to dtschema
mfd: dt-bindings: google,cros-ec: Reference Samsung SPI bindings
mfd: dt-bindings: google,cros-ec: Fix indentation in example
spi: s3c64xx: Allow controller-data to be optional
dt-bindings: power: supply: maxim,max14577: Convert to dtschema
regulator: dt-bindings: maxim,max14577: Convert to dtschema
dt-bindings: mfd: maxim,max14577: Convert to dtschema
regulator: dt-bindings: maxim,max77802: Convert to dtschema
dt-bindings: mfd: maxim,max77802: Convert to dtschema
.../devicetree/bindings/extcon/maxim,max77843.yaml | 40 +++++
.../devicetree/bindings/mfd/google,cros-ec.yaml | 31 ++--
Documentation/devicetree/bindings/mfd/max14577.txt | 147 ----------------
Documentation/devicetree/bindings/mfd/max77802.txt | 25 ---
.../devicetree/bindings/mfd/maxim,max14577.yaml | 195 +++++++++++++++++++++
.../devicetree/bindings/mfd/maxim,max77802.yaml | 194 ++++++++++++++++++++
.../devicetree/bindings/mfd/maxim,max77843.yaml | 144 +++++++++++++++
.../bindings/power/supply/maxim,max14577.yaml | 84 +++++++++
.../devicetree/bindings/regulator/max77802.txt | 111 ------------
.../bindings/regulator/maxim,max14577.yaml | 78 +++++++++
.../bindings/regulator/maxim,max77802.yaml | 85 +++++++++
.../bindings/regulator/maxim,max77843.yaml | 65 +++++++
.../bindings/soc/samsung/exynos-usi.yaml | 2 +-
.../bindings/spi/samsung,spi-peripheral-props.yaml | 33 ++++
.../devicetree/bindings/spi/samsung,spi.yaml | 187 ++++++++++++++++++++
.../bindings/spi/spi-peripheral-props.yaml | 1 +
.../devicetree/bindings/spi/spi-samsung.txt | 122 -------------
MAINTAINERS | 9 +-
drivers/spi/spi-s3c64xx.c | 14 +-
19 files changed, 1136 insertions(+), 431 deletions(-)
create mode 100644 Documentation/devicetree/bindings/extcon/maxim,max77843.yaml
delete mode 100644 Documentation/devicetree/bindings/mfd/max14577.txt
delete mode 100644 Documentation/devicetree/bindings/mfd/max77802.txt
create mode 100644 Documentation/devicetree/bindings/mfd/maxim,max14577.yaml
create mode 100644 Documentation/devicetree/bindings/mfd/maxim,max77802.yaml
create mode 100644 Documentation/devicetree/bindings/mfd/maxim,max77843.yaml
create mode 100644 Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml
delete mode 100644 Documentation/devicetree/bindings/regulator/max77802.txt
create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max14577.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max77802.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max77843.yaml
create mode 100644 Documentation/devicetree/bindings/spi/samsung,spi-peripheral-props.yaml
create mode 100644 Documentation/devicetree/bindings/spi/samsung,spi.yaml
delete mode 100644 Documentation/devicetree/bindings/spi/spi-samsung.txt
--
Lee Jones [李琼斯]
Principal Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
Enjoy!
The following changes since commit e783362eb54cd99b2cac8b3a9aeac942e6f6ac07:
Linux 5.17-rc1 (2022-01-23 10:12:53 +0200)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git ib-mfd-spi-dt-v5.18
for you to fetch changes up to 172e611b54e813c49a35b6b74bccaa99f27bf566:
dt-bindings: mfd: maxim,max77802: Convert to dtschema (2022-03-07 12:55:59 +0000)
----------------------------------------------------------------
Immutable branch between MFD, SPI and DT due for the v5.18 merge window
----------------------------------------------------------------
Krzysztof Kozlowski (13):
dt-bindings: extcon: maxim,max77843: Add MAX77843 bindings
regulator: dt-bindings: maxim,max77843: Add MAX77843 bindings
dt-bindings: mfd: maxim,max77843: Add MAX77843 bindings
MAINTAINERS: mfd: Cover MAX77843 by Maxim PMIC/MUIC for Exynos boards entry
spi: dt-bindings: samsung: Convert to dtschema
mfd: dt-bindings: google,cros-ec: Reference Samsung SPI bindings
mfd: dt-bindings: google,cros-ec: Fix indentation in example
spi: s3c64xx: Allow controller-data to be optional
dt-bindings: power: supply: maxim,max14577: Convert to dtschema
regulator: dt-bindings: maxim,max14577: Convert to dtschema
dt-bindings: mfd: maxim,max14577: Convert to dtschema
regulator: dt-bindings: maxim,max77802: Convert to dtschema
dt-bindings: mfd: maxim,max77802: Convert to dtschema
.../devicetree/bindings/extcon/maxim,max77843.yaml | 40 +++++
.../devicetree/bindings/mfd/google,cros-ec.yaml | 31 ++--
Documentation/devicetree/bindings/mfd/max14577.txt | 147 ----------------
Documentation/devicetree/bindings/mfd/max77802.txt | 25 ---
.../devicetree/bindings/mfd/maxim,max14577.yaml | 195 +++++++++++++++++++++
.../devicetree/bindings/mfd/maxim,max77802.yaml | 194 ++++++++++++++++++++
.../devicetree/bindings/mfd/maxim,max77843.yaml | 144 +++++++++++++++
.../bindings/power/supply/maxim,max14577.yaml | 84 +++++++++
.../devicetree/bindings/regulator/max77802.txt | 111 ------------
.../bindings/regulator/maxim,max14577.yaml | 78 +++++++++
.../bindings/regulator/maxim,max77802.yaml | 85 +++++++++
.../bindings/regulator/maxim,max77843.yaml | 65 +++++++
.../bindings/soc/samsung/exynos-usi.yaml | 2 +-
.../bindings/spi/samsung,spi-peripheral-props.yaml | 33 ++++
.../devicetree/bindings/spi/samsung,spi.yaml | 187 ++++++++++++++++++++
.../bindings/spi/spi-peripheral-props.yaml | 1 +
.../devicetree/bindings/spi/spi-samsung.txt | 122 -------------
MAINTAINERS | 9 +-
drivers/spi/spi-s3c64xx.c | 14 +-
19 files changed, 1136 insertions(+), 431 deletions(-)
create mode 100644 Documentation/devicetree/bindings/extcon/maxim,max77843.yaml
delete mode 100644 Documentation/devicetree/bindings/mfd/max14577.txt
delete mode 100644 Documentation/devicetree/bindings/mfd/max77802.txt
create mode 100644 Documentation/devicetree/bindings/mfd/maxim,max14577.yaml
create mode 100644 Documentation/devicetree/bindings/mfd/maxim,max77802.yaml
create mode 100644 Documentation/devicetree/bindings/mfd/maxim,max77843.yaml
create mode 100644 Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml
delete mode 100644 Documentation/devicetree/bindings/regulator/max77802.txt
create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max14577.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max77802.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max77843.yaml
create mode 100644 Documentation/devicetree/bindings/spi/samsung,spi-peripheral-props.yaml
create mode 100644 Documentation/devicetree/bindings/spi/samsung,spi.yaml
delete mode 100644 Documentation/devicetree/bindings/spi/spi-samsung.txt
--
Lee Jones [李琼斯]
Principal Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog