2022-02-26 20:15:53

by Bhupesh Sharma

Subject: [PATCH v2 2/4] pinctrl: qcom: sm8150: Specify PDC map

Specify the PDC mapping for SM8150, so that gpio interrupts are
properly mapped to the wakeup IRQs of the PDC.

Cc: Maulik Shah <[email protected]>
Cc: Bjorn Andersson <[email protected]>
Cc: Linus Walleij <[email protected]>
Signed-off-by: Bhupesh Sharma <[email protected]>
---
drivers/pinctrl/qcom/pinctrl-sm8150.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)

diff --git a/drivers/pinctrl/qcom/pinctrl-sm8150.c b/drivers/pinctrl/qcom/pinctrl-sm8150.c
index 7359bae68c69..1cc622694553 100644
--- a/drivers/pinctrl/qcom/pinctrl-sm8150.c
+++ b/drivers/pinctrl/qcom/pinctrl-sm8150.c
@@ -1500,6 +1500,25 @@ static const struct msm_pingroup sm8150_groups[] = {
[178] = SDC_QDSD_PINGROUP(sdc2_data, 0xB2000, 9, 0),
};

+static const struct msm_gpio_wakeirq_map sm8150_pdc_map[] = {
+ { 3, 31 }, { 5, 32 }, { 8, 33 }, { 9, 34 }, { 10, 100 },
+ { 12, 104 }, { 24, 37 }, { 26, 38 }, { 27, 41 }, { 28, 42 },
+ { 30, 39 }, { 36, 43 }, { 37, 44 }, { 38, 30 }, { 39, 118 },
+ { 39, 125 }, { 41, 47 }, { 42, 48 }, { 46, 50 }, { 47, 49 },
+ { 48, 51 }, { 49, 53 }, { 50, 52 }, { 51, 116 }, { 51, 123 },
+ { 53, 54 }, { 54, 55 }, { 55, 56 }, { 56, 57 }, { 58, 58 },
+ { 60, 60 }, { 61, 61 }, { 68, 62 }, { 70, 63 }, { 76, 71 },
+ { 77, 66 }, { 81, 64 }, { 83, 65 }, { 86, 67 }, { 87, 84 },
+ { 88, 117 }, { 88, 124 }, { 90, 69 }, { 91, 70 }, { 93, 75 },
+ { 95, 72 }, { 96, 73 }, { 97, 74 }, { 101, 40 }, { 103, 77 },
+ { 104, 78 }, { 108, 79 }, { 112, 80 }, { 113, 81 }, { 114, 82 },
+ { 117, 85 }, { 118, 101 }, { 119, 87 }, { 120, 88 }, { 121, 89 },
+ { 122, 90 }, { 123, 91 }, { 124, 92 }, { 125, 93 }, { 129, 94 },
+ { 132, 105 }, { 133, 83 }, { 134, 36 }, { 136, 97 }, { 142, 103 },
+ { 144, 115 }, { 144, 122 }, { 147, 102 }, { 150, 107 },
+ { 152, 108 }, { 153, 109 }
+};
+
static const struct msm_pinctrl_soc_data sm8150_pinctrl = {
.pins = sm8150_pins,
.npins = ARRAY_SIZE(sm8150_pins),
@@ -1510,6 +1529,9 @@ static const struct msm_pinctrl_soc_data sm8150_pinctrl = {
.ngpios = 176,
.tiles = sm8150_tiles,
.ntiles = ARRAY_SIZE(sm8150_tiles),
+ .wakeirq_map = sm8150_pdc_map,
+ .nwakeirq_map = ARRAY_SIZE(sm8150_pdc_map),
+ .wakeirq_dual_edge_errata = true,
};

static int sm8150_pinctrl_probe(struct platform_device *pdev)
--
2.35.1

2022-03-17 04:00:44

by Bjorn Andersson

Subject: Re: [PATCH v2 2/4] pinctrl: qcom: sm8150: Specify PDC map

On Sat 26 Feb 12:40 CST 2022, Bhupesh Sharma wrote:

> Specify the PDC mapping for SM8150, so that gpio interrupts are
> properly mapped to the wakeup IRQs of the PDC.
>
> Cc: Maulik Shah <[email protected]>
> Cc: Bjorn Andersson <[email protected]>
> Cc: Linus Walleij <[email protected]>
> Signed-off-by: Bhupesh Sharma <[email protected]>

Acked-by: Bjorn Andersson <[email protected]>

Regards,
Bjorn

> ---
> drivers/pinctrl/qcom/pinctrl-sm8150.c | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/drivers/pinctrl/qcom/pinctrl-sm8150.c b/drivers/pinctrl/qcom/pinctrl-sm8150.c
> index 7359bae68c69..1cc622694553 100644
> --- a/drivers/pinctrl/qcom/pinctrl-sm8150.c
> +++ b/drivers/pinctrl/qcom/pinctrl-sm8150.c
> @@ -1500,6 +1500,25 @@ static const struct msm_pingroup sm8150_groups[] = {
> [178] = SDC_QDSD_PINGROUP(sdc2_data, 0xB2000, 9, 0),
> };
>
> +static const struct msm_gpio_wakeirq_map sm8150_pdc_map[] = {
> + { 3, 31 }, { 5, 32 }, { 8, 33 }, { 9, 34 }, { 10, 100 },
> + { 12, 104 }, { 24, 37 }, { 26, 38 }, { 27, 41 }, { 28, 42 },
> + { 30, 39 }, { 36, 43 }, { 37, 44 }, { 38, 30 }, { 39, 118 },
> + { 39, 125 }, { 41, 47 }, { 42, 48 }, { 46, 50 }, { 47, 49 },
> + { 48, 51 }, { 49, 53 }, { 50, 52 }, { 51, 116 }, { 51, 123 },
> + { 53, 54 }, { 54, 55 }, { 55, 56 }, { 56, 57 }, { 58, 58 },
> + { 60, 60 }, { 61, 61 }, { 68, 62 }, { 70, 63 }, { 76, 71 },
> + { 77, 66 }, { 81, 64 }, { 83, 65 }, { 86, 67 }, { 87, 84 },
> + { 88, 117 }, { 88, 124 }, { 90, 69 }, { 91, 70 }, { 93, 75 },
> + { 95, 72 }, { 96, 73 }, { 97, 74 }, { 101, 40 }, { 103, 77 },
> + { 104, 78 }, { 108, 79 }, { 112, 80 }, { 113, 81 }, { 114, 82 },
> + { 117, 85 }, { 118, 101 }, { 119, 87 }, { 120, 88 }, { 121, 89 },
> + { 122, 90 }, { 123, 91 }, { 124, 92 }, { 125, 93 }, { 129, 94 },
> + { 132, 105 }, { 133, 83 }, { 134, 36 }, { 136, 97 }, { 142, 103 },
> + { 144, 115 }, { 144, 122 }, { 147, 102 }, { 150, 107 },
> + { 152, 108 }, { 153, 109 }
> +};
> +
> static const struct msm_pinctrl_soc_data sm8150_pinctrl = {
> .pins = sm8150_pins,
> .npins = ARRAY_SIZE(sm8150_pins),
> @@ -1510,6 +1529,9 @@ static const struct msm_pinctrl_soc_data sm8150_pinctrl = {
> .ngpios = 176,
> .tiles = sm8150_tiles,
> .ntiles = ARRAY_SIZE(sm8150_tiles),
> + .wakeirq_map = sm8150_pdc_map,
> + .nwakeirq_map = ARRAY_SIZE(sm8150_pdc_map),
> + .wakeirq_dual_edge_errata = true,
> };
>
> static int sm8150_pinctrl_probe(struct platform_device *pdev)
> --
> 2.35.1
>

2022-04-18 08:28:49

by Linus Walleij

Subject: Re: [PATCH v2 2/4] pinctrl: qcom: sm8150: Specify PDC map

On Sat, Feb 26, 2022 at 7:40 PM Bhupesh Sharma
<[email protected]> wrote:

> Specify the PDC mapping for SM8150, so that gpio interrupts are
> properly mapped to the wakeup IRQs of the PDC.
>
> Cc: Maulik Shah <[email protected]>
> Cc: Bjorn Andersson <[email protected]>
> Cc: Linus Walleij <[email protected]>
> Signed-off-by: Bhupesh Sharma <[email protected]>

Patch applied!

Yours,
Linus Walleij