On Tue 12 Apr 08:14 CDT 2022, Srinivasa Rao Mandadapu wrote:
> Add pinmux nodes for primary and secondary I2S for SC7280 based platforms.
>
> Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
> Co-developed-by: Venkata Prasad Potturu <[email protected]>
> Signed-off-by: Venkata Prasad Potturu <[email protected]>
> ---
> arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 14 +++++++++++
> arch/arm64/boot/dts/qcom/sc7280.dtsi | 40 ++++++++++++++++++++++++++++++++
> 2 files changed, 54 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> index ecbf2b8..1fc94b5 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> @@ -359,6 +359,20 @@
> bias-disable;
> };
>
> +&mi2s1_data0 {
> + drive-strength = <6>;
> + bias-disable;
> +};
> +
> +&mi2s1_sclk {
> + drive-strength = <6>;
> + bias-disable;
> +};
> +
> +&mi2s1_ws {
> + drive-strength = <6>;
> +};
> +
> &pm7325_gpios {
> key_vol_up_default: key-vol-up-default {
> pins = "gpio6";
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index f0b64be..6e6cfeda 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -3522,6 +3522,46 @@
> function = "edp_hot";
> };
>
> + mi2s0_data0: mi2s0-data0 {
Are these ever going to be selected individually, or could this be:
mi2s0_state: mi2s0-state {
data0 {
...;
};
data1 {
...;
};
mclk {
...;
};
etc
};
mi2s1-state {
...;
};
And then a single pinctrl-0 = <&mi2c0_state>;
Regards,
Bjorn
> + pins = "gpio98";
> + function = "mi2s0_data0";
> + };
> +
> + mi2s0_data1: mi2s0-data1 {
> + pins = "gpio99";
> + function = "mi2s0_data1";
> + };
> +
> + mi2s0_mclk: mi2s0-mclk {
> + pins = "gpio96";
> + function = "pri_mi2s";
> + };
> +
> + mi2s0_sclk: mi2s0-sclk {
> + pins = "gpio97";
> + function = "mi2s0_sck";
> + };
> +
> + mi2s0_ws: mi2s0-ws {
> + pins = "gpio100";
> + function = "mi2s0_ws";
> + };
> +
> + mi2s1_data0: mi2s1-data0 {
> + pins = "gpio107";
> + function = "mi2s1_data0";
> + };
> +
> + mi2s1_sclk: mi2s1-sclk {
> + pins = "gpio106";
> + function = "mi2s1_sck";
> + };
> +
> + mi2s1_ws: mi2s1-ws {
> + pins = "gpio108";
> + function = "mi2s1_ws";
> + };
> +
> pcie1_clkreq_n: pcie1-clkreq-n {
> pins = "gpio79";
> function = "pcie1_clkreqn";
> --
> 2.7.4
>