Replace the "<<" operator with BIT macro, in accordance to the
checkpatch.pl script and Linux kernel coding-style guidelines.
Signed-off-by: Abhirup Deb <[email protected]>
---
Changes in v2:
- Refactor the patch & Replace the erroneous BIT macro in --
"#define TSI148_PCFS_STAT_SELTIM BIT(9)"
with --
"#define TSI148_PCFS_STAT_SELTIM (3<<9)"
drivers/staging/vme_user/vme_tsi148.h | 534 +++++++++++++-------------
1 file changed, 267 insertions(+), 267 deletions(-)
diff --git a/drivers/staging/vme_user/vme_tsi148.h b/drivers/staging/vme_user/vme_tsi148.h
index b3cb4a089cc8..63f726e1811a 100644
--- a/drivers/staging/vme_user/vme_tsi148.h
+++ b/drivers/staging/vme_user/vme_tsi148.h
@@ -536,22 +536,22 @@ static const int TSI148_GCSR_MBOX[4] = { TSI148_GCSR_MBOX0,
/*
* PFCS Register Set
*/
-#define TSI148_PCFS_CMMD_SERR (1<<8) /* SERR_L out pin ssys err */
-#define TSI148_PCFS_CMMD_PERR (1<<6) /* PERR_L out pin parity */
-#define TSI148_PCFS_CMMD_MSTR (1<<2) /* PCI bus master */
-#define TSI148_PCFS_CMMD_MEMSP (1<<1) /* PCI mem space access */
-#define TSI148_PCFS_CMMD_IOSP (1<<0) /* PCI I/O space enable */
-
-#define TSI148_PCFS_STAT_RCPVE (1<<15) /* Detected Parity Error */
-#define TSI148_PCFS_STAT_SIGSE (1<<14) /* Signalled System Error */
-#define TSI148_PCFS_STAT_RCVMA (1<<13) /* Received Master Abort */
-#define TSI148_PCFS_STAT_RCVTA (1<<12) /* Received Target Abort */
-#define TSI148_PCFS_STAT_SIGTA (1<<11) /* Signalled Target Abort */
+#define TSI148_PCFS_CMMD_SERR BIT(8) /* SERR_L out pin ssys err */
+#define TSI148_PCFS_CMMD_PERR BIT(6) /* PERR_L out pin parity */
+#define TSI148_PCFS_CMMD_MSTR BIT(2) /* PCI bus master */
+#define TSI148_PCFS_CMMD_MEMSP BIT(1) /* PCI mem space access */
+#define TSI148_PCFS_CMMD_IOSP BIT(0) /* PCI I/O space enable */
+
+#define TSI148_PCFS_STAT_RCPVE BIT(15) /* Detected Parity Error */
+#define TSI148_PCFS_STAT_SIGSE BIT(14) /* Signalled System Error */
+#define TSI148_PCFS_STAT_RCVMA BIT(13) /* Received Master Abort */
+#define TSI148_PCFS_STAT_RCVTA BIT(12) /* Received Target Abort */
+#define TSI148_PCFS_STAT_SIGTA BIT(11) /* Signalled Target Abort */
#define TSI148_PCFS_STAT_SELTIM (3<<9) /* DELSEL Timing */
-#define TSI148_PCFS_STAT_DPAR (1<<8) /* Data Parity Err Reported */
-#define TSI148_PCFS_STAT_FAST (1<<7) /* Fast back-to-back Cap */
-#define TSI148_PCFS_STAT_P66M (1<<5) /* 66 MHz Capable */
-#define TSI148_PCFS_STAT_CAPL (1<<4) /* Capab List - address $34 */
+#define TSI148_PCFS_STAT_DPAR BIT(8) /* Data Parity Err Reported */
+#define TSI148_PCFS_STAT_FAST BIT(7) /* Fast back-to-back Cap */
+#define TSI148_PCFS_STAT_P66M BIT(5) /* 66 MHz Capable */
+#define TSI148_PCFS_STAT_CAPL BIT(4) /* Capab List - address $34 */
/*
* Revision ID/Class Code Registers (CRG +$008)
@@ -572,17 +572,17 @@ static const int TSI148_GCSR_MBOX[4] = { TSI148_GCSR_MBOX0,
* Memory Base Address Lower Reg (CRG + $010)
*/
#define TSI148_PCFS_MBARL_BASEL_M (0xFFFFF<<12) /* Base Addr Lower Mask */
-#define TSI148_PCFS_MBARL_PRE (1<<3) /* Prefetch */
+#define TSI148_PCFS_MBARL_PRE BIT(3) /* Prefetch */
#define TSI148_PCFS_MBARL_MTYPE_M (3<<1) /* Memory Type Mask */
-#define TSI148_PCFS_MBARL_IOMEM (1<<0) /* I/O Space Indicator */
+#define TSI148_PCFS_MBARL_IOMEM BIT(0) /* I/O Space Indicator */
/*
* Message Signaled Interrupt Capabilities Register (CRG + $040)
*/
-#define TSI148_PCFS_MSICAP_64BAC (1<<7) /* 64-bit Address Capable */
+#define TSI148_PCFS_MSICAP_64BAC BIT(7) /* 64-bit Address Capable */
#define TSI148_PCFS_MSICAP_MME_M (7<<4) /* Multiple Msg Enable Mask */
#define TSI148_PCFS_MSICAP_MMC_M (7<<1) /* Multiple Msg Capable Mask */
-#define TSI148_PCFS_MSICAP_MSIEN (1<<0) /* Msg signaled INT Enable */
+#define TSI148_PCFS_MSICAP_MSIEN BIT(0) /* Msg signaled INT Enable */
/*
* Message Address Lower Register (CRG +$044)
@@ -599,22 +599,22 @@ static const int TSI148_GCSR_MBOX[4] = { TSI148_GCSR_MBOX0,
*/
#define TSI148_PCFS_PCIXCAP_MOST_M (7<<4) /* Max outstanding Split Tran */
#define TSI148_PCFS_PCIXCAP_MMRBC_M (3<<2) /* Max Mem Read byte cnt */
-#define TSI148_PCFS_PCIXCAP_ERO (1<<1) /* Enable Relaxed Ordering */
-#define TSI148_PCFS_PCIXCAP_DPERE (1<<0) /* Data Parity Recover Enable */
+#define TSI148_PCFS_PCIXCAP_ERO BIT(1) /* Enable Relaxed Ordering */
+#define TSI148_PCFS_PCIXCAP_DPERE BIT(0) /* Data Parity Recover Enable */
/*
* PCI-X Status Register (CRG +$054)
*/
-#define TSI148_PCFS_PCIXSTAT_RSCEM (1<<29) /* Received Split Comp Error */
+#define TSI148_PCFS_PCIXSTAT_RSCEM BIT(29) /* Received Split Comp Error */
#define TSI148_PCFS_PCIXSTAT_DMCRS_M (7<<26) /* max Cumulative Read Size */
#define TSI148_PCFS_PCIXSTAT_DMOST_M (7<<23) /* max outstanding Split Trans
*/
#define TSI148_PCFS_PCIXSTAT_DMMRC_M (3<<21) /* max mem read byte count */
-#define TSI148_PCFS_PCIXSTAT_DC (1<<20) /* Device Complexity */
-#define TSI148_PCFS_PCIXSTAT_USC (1<<19) /* Unexpected Split comp */
-#define TSI148_PCFS_PCIXSTAT_SCD (1<<18) /* Split completion discard */
-#define TSI148_PCFS_PCIXSTAT_133C (1<<17) /* 133MHz capable */
-#define TSI148_PCFS_PCIXSTAT_64D (1<<16) /* 64 bit device */
+#define TSI148_PCFS_PCIXSTAT_DC BIT(20) /* Device Complexity */
+#define TSI148_PCFS_PCIXSTAT_USC BIT(19) /* Unexpected Split comp */
+#define TSI148_PCFS_PCIXSTAT_SCD BIT(18) /* Split completion discard */
+#define TSI148_PCFS_PCIXSTAT_133C BIT(17) /* 133MHz capable */
+#define TSI148_PCFS_PCIXSTAT_64D BIT(16) /* 64 bit device */
#define TSI148_PCFS_PCIXSTAT_BN_M (0xFF<<8) /* Bus number */
#define TSI148_PCFS_PCIXSTAT_DN_M (0x1F<<3) /* Device number */
#define TSI148_PCFS_PCIXSTAT_FN_M (7<<0) /* Function Number */
@@ -646,23 +646,23 @@ static const int TSI148_GCSR_MBOX[4] = { TSI148_GCSR_MBOX0,
/*
* Outbound Translation Attribute
*/
-#define TSI148_LCSR_OTAT_EN (1<<31) /* Window Enable */
-#define TSI148_LCSR_OTAT_MRPFD (1<<18) /* Prefetch Disable */
+#define TSI148_LCSR_OTAT_EN BIT(31) /* Window Enable */
+#define TSI148_LCSR_OTAT_MRPFD BIT(18) /* Prefetch Disable */
#define TSI148_LCSR_OTAT_PFS_M (3<<16) /* Prefetch Size Mask */
#define TSI148_LCSR_OTAT_PFS_2 (0<<16) /* 2 Cache Lines P Size */
-#define TSI148_LCSR_OTAT_PFS_4 (1<<16) /* 4 Cache Lines P Size */
+#define TSI148_LCSR_OTAT_PFS_4 BIT(16) /* 4 Cache Lines P Size */
#define TSI148_LCSR_OTAT_PFS_8 (2<<16) /* 8 Cache Lines P Size */
#define TSI148_LCSR_OTAT_PFS_16 (3<<16) /* 16 Cache Lines P Size */
#define TSI148_LCSR_OTAT_2eSSTM_M (7<<11) /* 2eSST Xfer Rate Mask */
#define TSI148_LCSR_OTAT_2eSSTM_160 (0<<11) /* 160MB/s 2eSST Xfer Rate */
-#define TSI148_LCSR_OTAT_2eSSTM_267 (1<<11) /* 267MB/s 2eSST Xfer Rate */
+#define TSI148_LCSR_OTAT_2eSSTM_267 BIT(11) /* 267MB/s 2eSST Xfer Rate */
#define TSI148_LCSR_OTAT_2eSSTM_320 (2<<11) /* 320MB/s 2eSST Xfer Rate */
#define TSI148_LCSR_OTAT_TM_M (7<<8) /* Xfer Protocol Mask */
#define TSI148_LCSR_OTAT_TM_SCT (0<<8) /* SCT Xfer Protocol */
-#define TSI148_LCSR_OTAT_TM_BLT (1<<8) /* BLT Xfer Protocol */
+#define TSI148_LCSR_OTAT_TM_BLT BIT(8) /* BLT Xfer Protocol */
#define TSI148_LCSR_OTAT_TM_MBLT (2<<8) /* MBLT Xfer Protocol */
#define TSI148_LCSR_OTAT_TM_2eVME (3<<8) /* 2eVME Xfer Protocol */
#define TSI148_LCSR_OTAT_TM_2eSST (4<<8) /* 2eSST Xfer Protocol */
@@ -670,14 +670,14 @@ static const int TSI148_GCSR_MBOX[4] = { TSI148_GCSR_MBOX0,
#define TSI148_LCSR_OTAT_DBW_M (3<<6) /* Max Data Width */
#define TSI148_LCSR_OTAT_DBW_16 (0<<6) /* 16-bit Data Width */
-#define TSI148_LCSR_OTAT_DBW_32 (1<<6) /* 32-bit Data Width */
+#define TSI148_LCSR_OTAT_DBW_32 BIT(6) /* 32-bit Data Width */
-#define TSI148_LCSR_OTAT_SUP (1<<5) /* Supervisory Access */
-#define TSI148_LCSR_OTAT_PGM (1<<4) /* Program Access */
+#define TSI148_LCSR_OTAT_SUP BIT(5) /* Supervisory Access */
+#define TSI148_LCSR_OTAT_PGM BIT(4) /* Program Access */
#define TSI148_LCSR_OTAT_AMODE_M (0xf<<0) /* Address Mode Mask */
#define TSI148_LCSR_OTAT_AMODE_A16 (0<<0) /* A16 Address Space */
-#define TSI148_LCSR_OTAT_AMODE_A24 (1<<0) /* A24 Address Space */
+#define TSI148_LCSR_OTAT_AMODE_A24 BIT(0) /* A24 Address Space */
#define TSI148_LCSR_OTAT_AMODE_A32 (2<<0) /* A32 Address Space */
#define TSI148_LCSR_OTAT_AMODE_A64 (4<<0) /* A32 Address Space */
#define TSI148_LCSR_OTAT_AMODE_CRCSR (5<<0) /* CR/CSR Address Space */
@@ -689,17 +689,17 @@ static const int TSI148_GCSR_MBOX[4] = { TSI148_GCSR_MBOX0,
/*
* VME Master Control Register CRG+$234
*/
-#define TSI148_LCSR_VMCTRL_VSA (1<<27) /* VMEbus Stop Ack */
-#define TSI148_LCSR_VMCTRL_VS (1<<26) /* VMEbus Stop */
-#define TSI148_LCSR_VMCTRL_DHB (1<<25) /* Device Has Bus */
-#define TSI148_LCSR_VMCTRL_DWB (1<<24) /* Device Wants Bus */
+#define TSI148_LCSR_VMCTRL_VSA BIT(27) /* VMEbus Stop Ack */
+#define TSI148_LCSR_VMCTRL_VS BIT(26) /* VMEbus Stop */
+#define TSI148_LCSR_VMCTRL_DHB BIT(25) /* Device Has Bus */
+#define TSI148_LCSR_VMCTRL_DWB BIT(24) /* Device Wants Bus */
-#define TSI148_LCSR_VMCTRL_RMWEN (1<<20) /* RMW Enable */
+#define TSI148_LCSR_VMCTRL_RMWEN BIT(20) /* RMW Enable */
#define TSI148_LCSR_VMCTRL_ATO_M (7<<16) /* Master Access Time-out Mask
*/
#define TSI148_LCSR_VMCTRL_ATO_32 (0<<16) /* 32 us */
-#define TSI148_LCSR_VMCTRL_ATO_128 (1<<16) /* 128 us */
+#define TSI148_LCSR_VMCTRL_ATO_128 BIT(16) /* 128 us */
#define TSI148_LCSR_VMCTRL_ATO_512 (2<<16) /* 512 us */
#define TSI148_LCSR_VMCTRL_ATO_2M (3<<16) /* 2 ms */
#define TSI148_LCSR_VMCTRL_ATO_8M (4<<16) /* 8 ms */
@@ -709,7 +709,7 @@ static const int TSI148_GCSR_MBOX[4] = { TSI148_GCSR_MBOX0,
#define TSI148_LCSR_VMCTRL_VTOFF_M (7<<12) /* VMEbus Master Time off */
#define TSI148_LCSR_VMCTRL_VTOFF_0 (0<<12) /* 0us */
-#define TSI148_LCSR_VMCTRL_VTOFF_1 (1<<12) /* 1us */
+#define TSI148_LCSR_VMCTRL_VTOFF_1 BIT(12) /* 1us */
#define TSI148_LCSR_VMCTRL_VTOFF_2 (2<<12) /* 2us */
#define TSI148_LCSR_VMCTRL_VTOFF_4 (3<<12) /* 4us */
#define TSI148_LCSR_VMCTRL_VTOFF_8 (4<<12) /* 8us */
@@ -719,7 +719,7 @@ static const int TSI148_GCSR_MBOX[4] = { TSI148_GCSR_MBOX0,
#define TSI148_LCSR_VMCTRL_VTON_M (7<<8) /* VMEbus Master Time On */
#define TSI148_LCSR_VMCTRL_VTON_4 (0<<8) /* 8us */
-#define TSI148_LCSR_VMCTRL_VTON_8 (1<<8) /* 8us */
+#define TSI148_LCSR_VMCTRL_VTON_8 BIT(8) /* 8us */
#define TSI148_LCSR_VMCTRL_VTON_16 (2<<8) /* 16us */
#define TSI148_LCSR_VMCTRL_VTON_32 (3<<8) /* 32us */
#define TSI148_LCSR_VMCTRL_VTON_64 (4<<8) /* 64us */
@@ -730,22 +730,22 @@ static const int TSI148_GCSR_MBOX[4] = { TSI148_GCSR_MBOX0,
#define TSI148_LCSR_VMCTRL_VREL_M (3<<3) /* VMEbus Master Rel Mode Mask
*/
#define TSI148_LCSR_VMCTRL_VREL_T_D (0<<3) /* Time on or Done */
-#define TSI148_LCSR_VMCTRL_VREL_T_R_D (1<<3) /* Time on and REQ or Done */
+#define TSI148_LCSR_VMCTRL_VREL_T_R_D BIT(3) /* Time on and REQ or Done */
#define TSI148_LCSR_VMCTRL_VREL_T_B_D (2<<3) /* Time on and BCLR or Done */
#define TSI148_LCSR_VMCTRL_VREL_T_D_R (3<<3) /* Time on or Done and REQ */
-#define TSI148_LCSR_VMCTRL_VFAIR (1<<2) /* VMEbus Master Fair Mode */
+#define TSI148_LCSR_VMCTRL_VFAIR BIT(2) /* VMEbus Master Fair Mode */
#define TSI148_LCSR_VMCTRL_VREQL_M (3<<0) /* VMEbus Master Req Level Mask
*/
/*
* VMEbus Control Register CRG+$238
*/
-#define TSI148_LCSR_VCTRL_LRE (1<<31) /* Late Retry Enable */
+#define TSI148_LCSR_VCTRL_LRE BIT(31) /* Late Retry Enable */
#define TSI148_LCSR_VCTRL_DLT_M (0xF<<24) /* Deadlock Timer */
#define TSI148_LCSR_VCTRL_DLT_OFF (0<<24) /* Deadlock Timer Off */
-#define TSI148_LCSR_VCTRL_DLT_16 (1<<24) /* 16 VCLKS */
+#define TSI148_LCSR_VCTRL_DLT_16 BIT(24) /* 16 VCLKS */
#define TSI148_LCSR_VCTRL_DLT_32 (2<<24) /* 32 VCLKS */
#define TSI148_LCSR_VCTRL_DLT_64 (3<<24) /* 64 VCLKS */
#define TSI148_LCSR_VCTRL_DLT_128 (4<<24) /* 128 VCLKS */
@@ -758,22 +758,22 @@ static const int TSI148_GCSR_MBOX[4] = { TSI148_GCSR_MBOX0,
#define TSI148_LCSR_VCTRL_DLT_16384 (0xB<<24) /* 16384 VCLKS */
#define TSI148_LCSR_VCTRL_DLT_32768 (0xC<<24) /* 32768 VCLKS */
-#define TSI148_LCSR_VCTRL_NERBB (1<<20) /* No Early Release of Bus Busy
+#define TSI148_LCSR_VCTRL_NERBB BIT(20) /* No Early Release of Bus Busy
*/
-#define TSI148_LCSR_VCTRL_SRESET (1<<17) /* System Reset */
-#define TSI148_LCSR_VCTRL_LRESET (1<<16) /* Local Reset */
+#define TSI148_LCSR_VCTRL_SRESET BIT(17) /* System Reset */
+#define TSI148_LCSR_VCTRL_LRESET BIT(16) /* Local Reset */
-#define TSI148_LCSR_VCTRL_SFAILAI (1<<15) /* SYSFAIL Auto Slot ID */
+#define TSI148_LCSR_VCTRL_SFAILAI BIT(15) /* SYSFAIL Auto Slot ID */
#define TSI148_LCSR_VCTRL_BID_M (0x1F<<8) /* Broadcast ID Mask */
-#define TSI148_LCSR_VCTRL_ATOEN (1<<7) /* Arbiter Time-out Enable */
-#define TSI148_LCSR_VCTRL_ROBIN (1<<6) /* VMEbus Round Robin */
+#define TSI148_LCSR_VCTRL_ATOEN BIT(7) /* Arbiter Time-out Enable */
+#define TSI148_LCSR_VCTRL_ROBIN BIT(6) /* VMEbus Round Robin */
#define TSI148_LCSR_VCTRL_GTO_M (7<<0) /* VMEbus Global Time-out Mask
*/
#define TSI148_LCSR_VCTRL_GTO_8 (0<<0) /* 8 us */
-#define TSI148_LCSR_VCTRL_GTO_16 (1<<0) /* 16 us */
+#define TSI148_LCSR_VCTRL_GTO_16 BIT(0) /* 16 us */
#define TSI148_LCSR_VCTRL_GTO_32 (2<<0) /* 32 us */
#define TSI148_LCSR_VCTRL_GTO_64 (3<<0) /* 64 us */
#define TSI148_LCSR_VCTRL_GTO_128 (4<<0) /* 128 us */
@@ -784,48 +784,48 @@ static const int TSI148_GCSR_MBOX[4] = { TSI148_GCSR_MBOX0,
/*
* VMEbus Status Register CRG + $23C
*/
-#define TSI148_LCSR_VSTAT_CPURST (1<<15) /* Clear power up reset */
-#define TSI148_LCSR_VSTAT_BRDFL (1<<14) /* Board fail */
-#define TSI148_LCSR_VSTAT_PURSTS (1<<12) /* Power up reset status */
-#define TSI148_LCSR_VSTAT_BDFAILS (1<<11) /* Board Fail Status */
-#define TSI148_LCSR_VSTAT_SYSFAILS (1<<10) /* System Fail Status */
-#define TSI148_LCSR_VSTAT_ACFAILS (1<<9) /* AC fail status */
-#define TSI148_LCSR_VSTAT_SCONS (1<<8) /* System Cont Status */
-#define TSI148_LCSR_VSTAT_GAP (1<<5) /* Geographic Addr Parity */
+#define TSI148_LCSR_VSTAT_CPURST BIT(15) /* Clear power up reset */
+#define TSI148_LCSR_VSTAT_BRDFL BIT(14) /* Board fail */
+#define TSI148_LCSR_VSTAT_PURSTS BIT(12) /* Power up reset status */
+#define TSI148_LCSR_VSTAT_BDFAILS BIT(11) /* Board Fail Status */
+#define TSI148_LCSR_VSTAT_SYSFAILS BIT(10) /* System Fail Status */
+#define TSI148_LCSR_VSTAT_ACFAILS BIT(9) /* AC fail status */
+#define TSI148_LCSR_VSTAT_SCONS BIT(8) /* System Cont Status */
+#define TSI148_LCSR_VSTAT_GAP BIT(5) /* Geographic Addr Parity */
#define TSI148_LCSR_VSTAT_GA_M (0x1F<<0) /* Geographic Addr Mask */
/*
* PCI Configuration Status Register CRG+$240
*/
-#define TSI148_LCSR_PSTAT_REQ64S (1<<6) /* Request 64 status set */
-#define TSI148_LCSR_PSTAT_M66ENS (1<<5) /* M66ENS 66Mhz enable */
-#define TSI148_LCSR_PSTAT_FRAMES (1<<4) /* Frame Status */
-#define TSI148_LCSR_PSTAT_IRDYS (1<<3) /* IRDY status */
-#define TSI148_LCSR_PSTAT_DEVSELS (1<<2) /* DEVL status */
-#define TSI148_LCSR_PSTAT_STOPS (1<<1) /* STOP status */
-#define TSI148_LCSR_PSTAT_TRDYS (1<<0) /* TRDY status */
+#define TSI148_LCSR_PSTAT_REQ64S BIT(6) /* Request 64 status set */
+#define TSI148_LCSR_PSTAT_M66ENS BIT(5) /* M66ENS 66Mhz enable */
+#define TSI148_LCSR_PSTAT_FRAMES BIT(4) /* Frame Status */
+#define TSI148_LCSR_PSTAT_IRDYS BIT(3) /* IRDY status */
+#define TSI148_LCSR_PSTAT_DEVSELS BIT(2) /* DEVL status */
+#define TSI148_LCSR_PSTAT_STOPS BIT(1) /* STOP status */
+#define TSI148_LCSR_PSTAT_TRDYS BIT(0) /* TRDY status */
/*
* VMEbus Exception Attributes Register CRG + $268
*/
-#define TSI148_LCSR_VEAT_VES (1<<31) /* Status */
-#define TSI148_LCSR_VEAT_VEOF (1<<30) /* Overflow */
-#define TSI148_LCSR_VEAT_VESCL (1<<29) /* Status Clear */
-#define TSI148_LCSR_VEAT_2EOT (1<<21) /* 2e Odd Termination */
-#define TSI148_LCSR_VEAT_2EST (1<<20) /* 2e Slave terminated */
-#define TSI148_LCSR_VEAT_BERR (1<<19) /* Bus Error */
-#define TSI148_LCSR_VEAT_LWORD (1<<18) /* LWORD_ signal state */
-#define TSI148_LCSR_VEAT_WRITE (1<<17) /* WRITE_ signal state */
-#define TSI148_LCSR_VEAT_IACK (1<<16) /* IACK_ signal state */
-#define TSI148_LCSR_VEAT_DS1 (1<<15) /* DS1_ signal state */
-#define TSI148_LCSR_VEAT_DS0 (1<<14) /* DS0_ signal state */
+#define TSI148_LCSR_VEAT_VES BIT(31) /* Status */
+#define TSI148_LCSR_VEAT_VEOF BIT(30) /* Overflow */
+#define TSI148_LCSR_VEAT_VESCL BIT(29) /* Status Clear */
+#define TSI148_LCSR_VEAT_2EOT BIT(21) /* 2e Odd Termination */
+#define TSI148_LCSR_VEAT_2EST BIT(20) /* 2e Slave terminated */
+#define TSI148_LCSR_VEAT_BERR BIT(19) /* Bus Error */
+#define TSI148_LCSR_VEAT_LWORD BIT(18) /* LWORD_ signal state */
+#define TSI148_LCSR_VEAT_WRITE BIT(17) /* WRITE_ signal state */
+#define TSI148_LCSR_VEAT_IACK BIT(16) /* IACK_ signal state */
+#define TSI148_LCSR_VEAT_DS1 BIT(15) /* DS1_ signal state */
+#define TSI148_LCSR_VEAT_DS0 BIT(14) /* DS0_ signal state */
#define TSI148_LCSR_VEAT_AM_M (0x3F<<8) /* Address Mode Mask */
#define TSI148_LCSR_VEAT_XAM_M (0xFF<<0) /* Master AMode Mask */
/*
* VMEbus PCI Error Diagnostics PCI/X Attributes Register CRG + $280
*/
-#define TSI148_LCSR_EDPAT_EDPCL (1<<29)
+#define TSI148_LCSR_EDPAT_EDPCL BIT(29)
/*
* Inbound Translation Starting Address Lower
@@ -851,36 +851,36 @@ static const int TSI148_GCSR_MBOX[4] = { TSI148_GCSR_MBOX0,
/*
* Inbound Translation Attribute
*/
-#define TSI148_LCSR_ITAT_EN (1<<31) /* Window Enable */
-#define TSI148_LCSR_ITAT_TH (1<<18) /* Prefetch Threshold */
+#define TSI148_LCSR_ITAT_EN BIT(31) /* Window Enable */
+#define TSI148_LCSR_ITAT_TH BIT(18) /* Prefetch Threshold */
#define TSI148_LCSR_ITAT_VFS_M (3<<16) /* Virtual FIFO Size Mask */
#define TSI148_LCSR_ITAT_VFS_64 (0<<16) /* 64 bytes Virtual FIFO Size */
-#define TSI148_LCSR_ITAT_VFS_128 (1<<16) /* 128 bytes Virtual FIFO Sz */
+#define TSI148_LCSR_ITAT_VFS_128 BIT(16) /* 128 bytes Virtual FIFO Sz */
#define TSI148_LCSR_ITAT_VFS_256 (2<<16) /* 256 bytes Virtual FIFO Sz */
#define TSI148_LCSR_ITAT_VFS_512 (3<<16) /* 512 bytes Virtual FIFO Sz */
#define TSI148_LCSR_ITAT_2eSSTM_M (7<<12) /* 2eSST Xfer Rate Mask */
#define TSI148_LCSR_ITAT_2eSSTM_160 (0<<12) /* 160MB/s 2eSST Xfer Rate */
-#define TSI148_LCSR_ITAT_2eSSTM_267 (1<<12) /* 267MB/s 2eSST Xfer Rate */
+#define TSI148_LCSR_ITAT_2eSSTM_267 BIT(12) /* 267MB/s 2eSST Xfer Rate */
#define TSI148_LCSR_ITAT_2eSSTM_320 (2<<12) /* 320MB/s 2eSST Xfer Rate */
-#define TSI148_LCSR_ITAT_2eSSTB (1<<11) /* 2eSST Bcast Xfer Protocol */
-#define TSI148_LCSR_ITAT_2eSST (1<<10) /* 2eSST Xfer Protocol */
-#define TSI148_LCSR_ITAT_2eVME (1<<9) /* 2eVME Xfer Protocol */
-#define TSI148_LCSR_ITAT_MBLT (1<<8) /* MBLT Xfer Protocol */
-#define TSI148_LCSR_ITAT_BLT (1<<7) /* BLT Xfer Protocol */
+#define TSI148_LCSR_ITAT_2eSSTB BIT(11) /* 2eSST Bcast Xfer Protocol */
+#define TSI148_LCSR_ITAT_2eSST BIT(10) /* 2eSST Xfer Protocol */
+#define TSI148_LCSR_ITAT_2eVME BIT(9) /* 2eVME Xfer Protocol */
+#define TSI148_LCSR_ITAT_MBLT BIT(8) /* MBLT Xfer Protocol */
+#define TSI148_LCSR_ITAT_BLT BIT(7) /* BLT Xfer Protocol */
#define TSI148_LCSR_ITAT_AS_M (7<<4) /* Address Space Mask */
#define TSI148_LCSR_ITAT_AS_A16 (0<<4) /* A16 Address Space */
-#define TSI148_LCSR_ITAT_AS_A24 (1<<4) /* A24 Address Space */
+#define TSI148_LCSR_ITAT_AS_A24 BIT(4) /* A24 Address Space */
#define TSI148_LCSR_ITAT_AS_A32 (2<<4) /* A32 Address Space */
#define TSI148_LCSR_ITAT_AS_A64 (4<<4) /* A64 Address Space */
-#define TSI148_LCSR_ITAT_SUPR (1<<3) /* Supervisor Access */
-#define TSI148_LCSR_ITAT_NPRIV (1<<2) /* Non-Priv (User) Access */
-#define TSI148_LCSR_ITAT_PGM (1<<1) /* Program Access */
-#define TSI148_LCSR_ITAT_DATA (1<<0) /* Data Access */
+#define TSI148_LCSR_ITAT_SUPR BIT(3) /* Supervisor Access */
+#define TSI148_LCSR_ITAT_NPRIV BIT(2) /* Non-Priv (User) Access */
+#define TSI148_LCSR_ITAT_PGM BIT(1) /* Program Access */
+#define TSI148_LCSR_ITAT_DATA BIT(0) /* Data Access */
/*
* GCSR Base Address Lower Address CRG +$404
@@ -890,18 +890,18 @@ static const int TSI148_GCSR_MBOX[4] = { TSI148_GCSR_MBOX0,
/*
* GCSR Attribute Register CRG + $408
*/
-#define TSI148_LCSR_GCSRAT_EN (1<<7) /* Enable access to GCSR */
+#define TSI148_LCSR_GCSRAT_EN BIT(7) /* Enable access to GCSR */
#define TSI148_LCSR_GCSRAT_AS_M (7<<4) /* Address Space Mask */
#define TSI148_LCSR_GCSRAT_AS_A16 (0<<4) /* Address Space 16 */
-#define TSI148_LCSR_GCSRAT_AS_A24 (1<<4) /* Address Space 24 */
+#define TSI148_LCSR_GCSRAT_AS_A24 BIT(4) /* Address Space 24 */
#define TSI148_LCSR_GCSRAT_AS_A32 (2<<4) /* Address Space 32 */
#define TSI148_LCSR_GCSRAT_AS_A64 (4<<4) /* Address Space 64 */
-#define TSI148_LCSR_GCSRAT_SUPR (1<<3) /* Sup set -GCSR decoder */
-#define TSI148_LCSR_GCSRAT_NPRIV (1<<2) /* Non-Privliged set - CGSR */
-#define TSI148_LCSR_GCSRAT_PGM (1<<1) /* Program set - GCSR decoder */
-#define TSI148_LCSR_GCSRAT_DATA (1<<0) /* DATA set GCSR decoder */
+#define TSI148_LCSR_GCSRAT_SUPR BIT(3) /* Sup set -GCSR decoder */
+#define TSI148_LCSR_GCSRAT_NPRIV BIT(2) /* Non-Privliged set - CGSR */
+#define TSI148_LCSR_GCSRAT_PGM BIT(1) /* Program set - GCSR decoder */
+#define TSI148_LCSR_GCSRAT_DATA BIT(0) /* DATA set GCSR decoder */
/*
* CRG Base Address Lower Address CRG + $410
@@ -911,18 +911,18 @@ static const int TSI148_GCSR_MBOX[4] = { TSI148_GCSR_MBOX0,
/*
* CRG Attribute Register CRG + $414
*/
-#define TSI148_LCSR_CRGAT_EN (1<<7) /* Enable PRG Access */
+#define TSI148_LCSR_CRGAT_EN BIT(7) /* Enable PRG Access */
#define TSI148_LCSR_CRGAT_AS_M (7<<4) /* Address Space */
#define TSI148_LCSR_CRGAT_AS_A16 (0<<4) /* Address Space 16 */
-#define TSI148_LCSR_CRGAT_AS_A24 (1<<4) /* Address Space 24 */
+#define TSI148_LCSR_CRGAT_AS_A24 BIT(4) /* Address Space 24 */
#define TSI148_LCSR_CRGAT_AS_A32 (2<<4) /* Address Space 32 */
#define TSI148_LCSR_CRGAT_AS_A64 (4<<4) /* Address Space 64 */
-#define TSI148_LCSR_CRGAT_SUPR (1<<3) /* Supervisor Access */
-#define TSI148_LCSR_CRGAT_NPRIV (1<<2) /* Non-Privliged(User) Access */
-#define TSI148_LCSR_CRGAT_PGM (1<<1) /* Program Access */
-#define TSI148_LCSR_CRGAT_DATA (1<<0) /* Data Access */
+#define TSI148_LCSR_CRGAT_SUPR BIT(3) /* Supervisor Access */
+#define TSI148_LCSR_CRGAT_NPRIV BIT(2) /* Non-Privliged(User) Access */
+#define TSI148_LCSR_CRGAT_PGM BIT(1) /* Program Access */
+#define TSI148_LCSR_CRGAT_DATA BIT(0) /* Data Access */
/*
* CR/CSR Offset Lower Register CRG + $41C
@@ -932,7 +932,7 @@ static const int TSI148_GCSR_MBOX[4] = { TSI148_GCSR_MBOX0,
/*
* CR/CSR Attribute register CRG + $420
*/
-#define TSI148_LCSR_CRAT_EN (1<<7) /* Enable access to CR/CSR */
+#define TSI148_LCSR_CRAT_EN BIT(7) /* Enable access to CR/CSR */
/*
* Location Monitor base address lower register CRG + $428
@@ -942,18 +942,18 @@ static const int TSI148_GCSR_MBOX[4] = { TSI148_GCSR_MBOX0,
/*
* Location Monitor Attribute Register CRG + $42C
*/
-#define TSI148_LCSR_LMAT_EN (1<<7) /* Enable Location Monitor */
+#define TSI148_LCSR_LMAT_EN BIT(7) /* Enable Location Monitor */
#define TSI148_LCSR_LMAT_AS_M (7<<4) /* Address Space MASK */
#define TSI148_LCSR_LMAT_AS_A16 (0<<4) /* A16 */
-#define TSI148_LCSR_LMAT_AS_A24 (1<<4) /* A24 */
+#define TSI148_LCSR_LMAT_AS_A24 BIT(4) /* A24 */
#define TSI148_LCSR_LMAT_AS_A32 (2<<4) /* A32 */
#define TSI148_LCSR_LMAT_AS_A64 (4<<4) /* A64 */
-#define TSI148_LCSR_LMAT_SUPR (1<<3) /* Supervisor Access */
-#define TSI148_LCSR_LMAT_NPRIV (1<<2) /* Non-Priv (User) Access */
-#define TSI148_LCSR_LMAT_PGM (1<<1) /* Program Access */
-#define TSI148_LCSR_LMAT_DATA (1<<0) /* Data Access */
+#define TSI148_LCSR_LMAT_SUPR BIT(3) /* Supervisor Access */
+#define TSI148_LCSR_LMAT_NPRIV BIT(2) /* Non-Priv (User) Access */
+#define TSI148_LCSR_LMAT_PGM BIT(1) /* Program Access */
+#define TSI148_LCSR_LMAT_DATA BIT(0) /* Data Access */
/*
* Broadcast Pulse Generator Timer Register CRG + $438
@@ -969,34 +969,34 @@ static const int TSI148_GCSR_MBOX[4] = { TSI148_GCSR_MBOX0,
* VMEbus Interrupt Control Register CRG + $43C
*/
#define TSI148_LCSR_VICR_CNTS_M (3<<22) /* Cntr Source MASK */
-#define TSI148_LCSR_VICR_CNTS_DIS (1<<22) /* Cntr Disable */
+#define TSI148_LCSR_VICR_CNTS_DIS BIT(22) /* Cntr Disable */
#define TSI148_LCSR_VICR_CNTS_IRQ1 (2<<22) /* IRQ1 to Cntr */
#define TSI148_LCSR_VICR_CNTS_IRQ2 (3<<22) /* IRQ2 to Cntr */
#define TSI148_LCSR_VICR_EDGIS_M (3<<20) /* Edge interrupt MASK */
-#define TSI148_LCSR_VICR_EDGIS_DIS (1<<20) /* Edge interrupt Disable */
+#define TSI148_LCSR_VICR_EDGIS_DIS BIT(20) /* Edge interrupt Disable */
#define TSI148_LCSR_VICR_EDGIS_IRQ1 (2<<20) /* IRQ1 to Edge */
#define TSI148_LCSR_VICR_EDGIS_IRQ2 (3<<20) /* IRQ2 to Edge */
#define TSI148_LCSR_VICR_IRQIF_M (3<<18) /* IRQ1* Function MASK */
-#define TSI148_LCSR_VICR_IRQIF_NORM (1<<18) /* Normal */
+#define TSI148_LCSR_VICR_IRQIF_NORM BIT(18) /* Normal */
#define TSI148_LCSR_VICR_IRQIF_PULSE (2<<18) /* Pulse Generator */
#define TSI148_LCSR_VICR_IRQIF_PROG (3<<18) /* Programmable Clock */
#define TSI148_LCSR_VICR_IRQIF_1U (4<<18) /* 1us Clock */
#define TSI148_LCSR_VICR_IRQ2F_M (3<<16) /* IRQ2* Function MASK */
-#define TSI148_LCSR_VICR_IRQ2F_NORM (1<<16) /* Normal */
+#define TSI148_LCSR_VICR_IRQ2F_NORM BIT(16) /* Normal */
#define TSI148_LCSR_VICR_IRQ2F_PULSE (2<<16) /* Pulse Generator */
#define TSI148_LCSR_VICR_IRQ2F_PROG (3<<16) /* Programmable Clock */
#define TSI148_LCSR_VICR_IRQ2F_1U (4<<16) /* 1us Clock */
-#define TSI148_LCSR_VICR_BIP (1<<15) /* Broadcast Interrupt Pulse */
+#define TSI148_LCSR_VICR_BIP BIT(15) /* Broadcast Interrupt Pulse */
-#define TSI148_LCSR_VICR_IRQC (1<<12) /* VMEbus IRQ Clear */
-#define TSI148_LCSR_VICR_IRQS (1<<11) /* VMEbus IRQ Status */
+#define TSI148_LCSR_VICR_IRQC BIT(12) /* VMEbus IRQ Clear */
+#define TSI148_LCSR_VICR_IRQS BIT(11) /* VMEbus IRQ Status */
#define TSI148_LCSR_VICR_IRQL_M (7<<8) /* VMEbus SW IRQ Level Mask */
-#define TSI148_LCSR_VICR_IRQL_1 (1<<8) /* VMEbus SW IRQ Level 1 */
+#define TSI148_LCSR_VICR_IRQL_1 BIT(8) /* VMEbus SW IRQ Level 1 */
#define TSI148_LCSR_VICR_IRQL_2 (2<<8) /* VMEbus SW IRQ Level 2 */
#define TSI148_LCSR_VICR_IRQL_3 (3<<8) /* VMEbus SW IRQ Level 3 */
#define TSI148_LCSR_VICR_IRQL_4 (4<<8) /* VMEbus SW IRQ Level 4 */
@@ -1014,29 +1014,29 @@ static const int TSI148_LCSR_VICR_IRQL[8] = { 0, TSI148_LCSR_VICR_IRQL_1,
/*
* Interrupt Enable Register CRG + $440
*/
-#define TSI148_LCSR_INTEN_DMA1EN (1<<25) /* DMAC 1 */
-#define TSI148_LCSR_INTEN_DMA0EN (1<<24) /* DMAC 0 */
-#define TSI148_LCSR_INTEN_LM3EN (1<<23) /* Location Monitor 3 */
-#define TSI148_LCSR_INTEN_LM2EN (1<<22) /* Location Monitor 2 */
-#define TSI148_LCSR_INTEN_LM1EN (1<<21) /* Location Monitor 1 */
-#define TSI148_LCSR_INTEN_LM0EN (1<<20) /* Location Monitor 0 */
-#define TSI148_LCSR_INTEN_MB3EN (1<<19) /* Mail Box 3 */
-#define TSI148_LCSR_INTEN_MB2EN (1<<18) /* Mail Box 2 */
-#define TSI148_LCSR_INTEN_MB1EN (1<<17) /* Mail Box 1 */
-#define TSI148_LCSR_INTEN_MB0EN (1<<16) /* Mail Box 0 */
-#define TSI148_LCSR_INTEN_PERREN (1<<13) /* PCI/X Error */
-#define TSI148_LCSR_INTEN_VERREN (1<<12) /* VMEbus Error */
-#define TSI148_LCSR_INTEN_VIEEN (1<<11) /* VMEbus IRQ Edge */
-#define TSI148_LCSR_INTEN_IACKEN (1<<10) /* IACK */
-#define TSI148_LCSR_INTEN_SYSFLEN (1<<9) /* System Fail */
-#define TSI148_LCSR_INTEN_ACFLEN (1<<8) /* AC Fail */
-#define TSI148_LCSR_INTEN_IRQ7EN (1<<7) /* IRQ7 */
-#define TSI148_LCSR_INTEN_IRQ6EN (1<<6) /* IRQ6 */
-#define TSI148_LCSR_INTEN_IRQ5EN (1<<5) /* IRQ5 */
-#define TSI148_LCSR_INTEN_IRQ4EN (1<<4) /* IRQ4 */
-#define TSI148_LCSR_INTEN_IRQ3EN (1<<3) /* IRQ3 */
-#define TSI148_LCSR_INTEN_IRQ2EN (1<<2) /* IRQ2 */
-#define TSI148_LCSR_INTEN_IRQ1EN (1<<1) /* IRQ1 */
+#define TSI148_LCSR_INTEN_DMA1EN BIT(25) /* DMAC 1 */
+#define TSI148_LCSR_INTEN_DMA0EN BIT(24) /* DMAC 0 */
+#define TSI148_LCSR_INTEN_LM3EN BIT(23) /* Location Monitor 3 */
+#define TSI148_LCSR_INTEN_LM2EN BIT(22) /* Location Monitor 2 */
+#define TSI148_LCSR_INTEN_LM1EN BIT(21) /* Location Monitor 1 */
+#define TSI148_LCSR_INTEN_LM0EN BIT(20) /* Location Monitor 0 */
+#define TSI148_LCSR_INTEN_MB3EN BIT(19) /* Mail Box 3 */
+#define TSI148_LCSR_INTEN_MB2EN BIT(18) /* Mail Box 2 */
+#define TSI148_LCSR_INTEN_MB1EN BIT(17) /* Mail Box 1 */
+#define TSI148_LCSR_INTEN_MB0EN BIT(16) /* Mail Box 0 */
+#define TSI148_LCSR_INTEN_PERREN BIT(13) /* PCI/X Error */
+#define TSI148_LCSR_INTEN_VERREN BIT(12) /* VMEbus Error */
+#define TSI148_LCSR_INTEN_VIEEN BIT(11) /* VMEbus IRQ Edge */
+#define TSI148_LCSR_INTEN_IACKEN BIT(10) /* IACK */
+#define TSI148_LCSR_INTEN_SYSFLEN BIT(9) /* System Fail */
+#define TSI148_LCSR_INTEN_ACFLEN BIT(8) /* AC Fail */
+#define TSI148_LCSR_INTEN_IRQ7EN BIT(7) /* IRQ7 */
+#define TSI148_LCSR_INTEN_IRQ6EN BIT(6) /* IRQ6 */
+#define TSI148_LCSR_INTEN_IRQ5EN BIT(5) /* IRQ5 */
+#define TSI148_LCSR_INTEN_IRQ4EN BIT(4) /* IRQ4 */
+#define TSI148_LCSR_INTEN_IRQ3EN BIT(3) /* IRQ3 */
+#define TSI148_LCSR_INTEN_IRQ2EN BIT(2) /* IRQ2 */
+#define TSI148_LCSR_INTEN_IRQ1EN BIT(1) /* IRQ1 */
static const int TSI148_LCSR_INTEN_LMEN[4] = { TSI148_LCSR_INTEN_LM0EN,
TSI148_LCSR_INTEN_LM1EN,
@@ -1054,29 +1054,29 @@ static const int TSI148_LCSR_INTEN_IRQEN[7] = { TSI148_LCSR_INTEN_IRQ1EN,
/*
* Interrupt Enable Out Register CRG + $444
*/
-#define TSI148_LCSR_INTEO_DMA1EO (1<<25) /* DMAC 1 */
-#define TSI148_LCSR_INTEO_DMA0EO (1<<24) /* DMAC 0 */
-#define TSI148_LCSR_INTEO_LM3EO (1<<23) /* Loc Monitor 3 */
-#define TSI148_LCSR_INTEO_LM2EO (1<<22) /* Loc Monitor 2 */
-#define TSI148_LCSR_INTEO_LM1EO (1<<21) /* Loc Monitor 1 */
-#define TSI148_LCSR_INTEO_LM0EO (1<<20) /* Location Monitor 0 */
-#define TSI148_LCSR_INTEO_MB3EO (1<<19) /* Mail Box 3 */
-#define TSI148_LCSR_INTEO_MB2EO (1<<18) /* Mail Box 2 */
-#define TSI148_LCSR_INTEO_MB1EO (1<<17) /* Mail Box 1 */
-#define TSI148_LCSR_INTEO_MB0EO (1<<16) /* Mail Box 0 */
-#define TSI148_LCSR_INTEO_PERREO (1<<13) /* PCI/X Error */
-#define TSI148_LCSR_INTEO_VERREO (1<<12) /* VMEbus Error */
-#define TSI148_LCSR_INTEO_VIEEO (1<<11) /* VMEbus IRQ Edge */
-#define TSI148_LCSR_INTEO_IACKEO (1<<10) /* IACK */
-#define TSI148_LCSR_INTEO_SYSFLEO (1<<9) /* System Fail */
-#define TSI148_LCSR_INTEO_ACFLEO (1<<8) /* AC Fail */
-#define TSI148_LCSR_INTEO_IRQ7EO (1<<7) /* IRQ7 */
-#define TSI148_LCSR_INTEO_IRQ6EO (1<<6) /* IRQ6 */
-#define TSI148_LCSR_INTEO_IRQ5EO (1<<5) /* IRQ5 */
-#define TSI148_LCSR_INTEO_IRQ4EO (1<<4) /* IRQ4 */
-#define TSI148_LCSR_INTEO_IRQ3EO (1<<3) /* IRQ3 */
-#define TSI148_LCSR_INTEO_IRQ2EO (1<<2) /* IRQ2 */
-#define TSI148_LCSR_INTEO_IRQ1EO (1<<1) /* IRQ1 */
+#define TSI148_LCSR_INTEO_DMA1EO BIT(25) /* DMAC 1 */
+#define TSI148_LCSR_INTEO_DMA0EO BIT(24) /* DMAC 0 */
+#define TSI148_LCSR_INTEO_LM3EO BIT(23) /* Loc Monitor 3 */
+#define TSI148_LCSR_INTEO_LM2EO BIT(22) /* Loc Monitor 2 */
+#define TSI148_LCSR_INTEO_LM1EO BIT(21) /* Loc Monitor 1 */
+#define TSI148_LCSR_INTEO_LM0EO BIT(20) /* Location Monitor 0 */
+#define TSI148_LCSR_INTEO_MB3EO BIT(19) /* Mail Box 3 */
+#define TSI148_LCSR_INTEO_MB2EO BIT(18) /* Mail Box 2 */
+#define TSI148_LCSR_INTEO_MB1EO BIT(17) /* Mail Box 1 */
+#define TSI148_LCSR_INTEO_MB0EO BIT(16) /* Mail Box 0 */
+#define TSI148_LCSR_INTEO_PERREO BIT(13) /* PCI/X Error */
+#define TSI148_LCSR_INTEO_VERREO BIT(12) /* VMEbus Error */
+#define TSI148_LCSR_INTEO_VIEEO BIT(11) /* VMEbus IRQ Edge */
+#define TSI148_LCSR_INTEO_IACKEO BIT(10) /* IACK */
+#define TSI148_LCSR_INTEO_SYSFLEO BIT(9) /* System Fail */
+#define TSI148_LCSR_INTEO_ACFLEO BIT(8) /* AC Fail */
+#define TSI148_LCSR_INTEO_IRQ7EO BIT(7) /* IRQ7 */
+#define TSI148_LCSR_INTEO_IRQ6EO BIT(6) /* IRQ6 */
+#define TSI148_LCSR_INTEO_IRQ5EO BIT(5) /* IRQ5 */
+#define TSI148_LCSR_INTEO_IRQ4EO BIT(4) /* IRQ4 */
+#define TSI148_LCSR_INTEO_IRQ3EO BIT(3) /* IRQ3 */
+#define TSI148_LCSR_INTEO_IRQ2EO BIT(2) /* IRQ2 */
+#define TSI148_LCSR_INTEO_IRQ1EO BIT(1) /* IRQ1 */
static const int TSI148_LCSR_INTEO_LMEO[4] = { TSI148_LCSR_INTEO_LM0EO,
TSI148_LCSR_INTEO_LM1EO,
@@ -1094,29 +1094,29 @@ static const int TSI148_LCSR_INTEO_IRQEO[7] = { TSI148_LCSR_INTEO_IRQ1EO,
/*
* Interrupt Status Register CRG + $448
*/
-#define TSI148_LCSR_INTS_DMA1S (1<<25) /* DMA 1 */
-#define TSI148_LCSR_INTS_DMA0S (1<<24) /* DMA 0 */
-#define TSI148_LCSR_INTS_LM3S (1<<23) /* Location Monitor 3 */
-#define TSI148_LCSR_INTS_LM2S (1<<22) /* Location Monitor 2 */
-#define TSI148_LCSR_INTS_LM1S (1<<21) /* Location Monitor 1 */
-#define TSI148_LCSR_INTS_LM0S (1<<20) /* Location Monitor 0 */
-#define TSI148_LCSR_INTS_MB3S (1<<19) /* Mail Box 3 */
-#define TSI148_LCSR_INTS_MB2S (1<<18) /* Mail Box 2 */
-#define TSI148_LCSR_INTS_MB1S (1<<17) /* Mail Box 1 */
-#define TSI148_LCSR_INTS_MB0S (1<<16) /* Mail Box 0 */
-#define TSI148_LCSR_INTS_PERRS (1<<13) /* PCI/X Error */
-#define TSI148_LCSR_INTS_VERRS (1<<12) /* VMEbus Error */
-#define TSI148_LCSR_INTS_VIES (1<<11) /* VMEbus IRQ Edge */
-#define TSI148_LCSR_INTS_IACKS (1<<10) /* IACK */
-#define TSI148_LCSR_INTS_SYSFLS (1<<9) /* System Fail */
-#define TSI148_LCSR_INTS_ACFLS (1<<8) /* AC Fail */
-#define TSI148_LCSR_INTS_IRQ7S (1<<7) /* IRQ7 */
-#define TSI148_LCSR_INTS_IRQ6S (1<<6) /* IRQ6 */
-#define TSI148_LCSR_INTS_IRQ5S (1<<5) /* IRQ5 */
-#define TSI148_LCSR_INTS_IRQ4S (1<<4) /* IRQ4 */
-#define TSI148_LCSR_INTS_IRQ3S (1<<3) /* IRQ3 */
-#define TSI148_LCSR_INTS_IRQ2S (1<<2) /* IRQ2 */
-#define TSI148_LCSR_INTS_IRQ1S (1<<1) /* IRQ1 */
+#define TSI148_LCSR_INTS_DMA1S BIT(25) /* DMA 1 */
+#define TSI148_LCSR_INTS_DMA0S BIT(24) /* DMA 0 */
+#define TSI148_LCSR_INTS_LM3S BIT(23) /* Location Monitor 3 */
+#define TSI148_LCSR_INTS_LM2S BIT(22) /* Location Monitor 2 */
+#define TSI148_LCSR_INTS_LM1S BIT(21) /* Location Monitor 1 */
+#define TSI148_LCSR_INTS_LM0S BIT(20) /* Location Monitor 0 */
+#define TSI148_LCSR_INTS_MB3S BIT(19) /* Mail Box 3 */
+#define TSI148_LCSR_INTS_MB2S BIT(18) /* Mail Box 2 */
+#define TSI148_LCSR_INTS_MB1S BIT(17) /* Mail Box 1 */
+#define TSI148_LCSR_INTS_MB0S BIT(16) /* Mail Box 0 */
+#define TSI148_LCSR_INTS_PERRS BIT(13) /* PCI/X Error */
+#define TSI148_LCSR_INTS_VERRS BIT(12) /* VMEbus Error */
+#define TSI148_LCSR_INTS_VIES BIT(11) /* VMEbus IRQ Edge */
+#define TSI148_LCSR_INTS_IACKS BIT(10) /* IACK */
+#define TSI148_LCSR_INTS_SYSFLS BIT(9) /* System Fail */
+#define TSI148_LCSR_INTS_ACFLS BIT(8) /* AC Fail */
+#define TSI148_LCSR_INTS_IRQ7S BIT(7) /* IRQ7 */
+#define TSI148_LCSR_INTS_IRQ6S BIT(6) /* IRQ6 */
+#define TSI148_LCSR_INTS_IRQ5S BIT(5) /* IRQ5 */
+#define TSI148_LCSR_INTS_IRQ4S BIT(4) /* IRQ4 */
+#define TSI148_LCSR_INTS_IRQ3S BIT(3) /* IRQ3 */
+#define TSI148_LCSR_INTS_IRQ2S BIT(2) /* IRQ2 */
+#define TSI148_LCSR_INTS_IRQ1S BIT(1) /* IRQ1 */
static const int TSI148_LCSR_INTS_LMS[4] = { TSI148_LCSR_INTS_LM0S,
TSI148_LCSR_INTS_LM1S,
@@ -1131,22 +1131,22 @@ static const int TSI148_LCSR_INTS_MBS[4] = { TSI148_LCSR_INTS_MB0S,
/*
* Interrupt Clear Register CRG + $44C
*/
-#define TSI148_LCSR_INTC_DMA1C (1<<25) /* DMA 1 */
-#define TSI148_LCSR_INTC_DMA0C (1<<24) /* DMA 0 */
-#define TSI148_LCSR_INTC_LM3C (1<<23) /* Location Monitor 3 */
-#define TSI148_LCSR_INTC_LM2C (1<<22) /* Location Monitor 2 */
-#define TSI148_LCSR_INTC_LM1C (1<<21) /* Location Monitor 1 */
-#define TSI148_LCSR_INTC_LM0C (1<<20) /* Location Monitor 0 */
-#define TSI148_LCSR_INTC_MB3C (1<<19) /* Mail Box 3 */
-#define TSI148_LCSR_INTC_MB2C (1<<18) /* Mail Box 2 */
-#define TSI148_LCSR_INTC_MB1C (1<<17) /* Mail Box 1 */
-#define TSI148_LCSR_INTC_MB0C (1<<16) /* Mail Box 0 */
-#define TSI148_LCSR_INTC_PERRC (1<<13) /* VMEbus Error */
-#define TSI148_LCSR_INTC_VERRC (1<<12) /* VMEbus Access Time-out */
-#define TSI148_LCSR_INTC_VIEC (1<<11) /* VMEbus IRQ Edge */
-#define TSI148_LCSR_INTC_IACKC (1<<10) /* IACK */
-#define TSI148_LCSR_INTC_SYSFLC (1<<9) /* System Fail */
-#define TSI148_LCSR_INTC_ACFLC (1<<8) /* AC Fail */
+#define TSI148_LCSR_INTC_DMA1C BIT(25) /* DMA 1 */
+#define TSI148_LCSR_INTC_DMA0C BIT(24) /* DMA 0 */
+#define TSI148_LCSR_INTC_LM3C BIT(23) /* Location Monitor 3 */
+#define TSI148_LCSR_INTC_LM2C BIT(22) /* Location Monitor 2 */
+#define TSI148_LCSR_INTC_LM1C BIT(21) /* Location Monitor 1 */
+#define TSI148_LCSR_INTC_LM0C BIT(20) /* Location Monitor 0 */
+#define TSI148_LCSR_INTC_MB3C BIT(19) /* Mail Box 3 */
+#define TSI148_LCSR_INTC_MB2C BIT(18) /* Mail Box 2 */
+#define TSI148_LCSR_INTC_MB1C BIT(17) /* Mail Box 1 */
+#define TSI148_LCSR_INTC_MB0C BIT(16) /* Mail Box 0 */
+#define TSI148_LCSR_INTC_PERRC BIT(13) /* VMEbus Error */
+#define TSI148_LCSR_INTC_VERRC BIT(12) /* VMEbus Access Time-out */
+#define TSI148_LCSR_INTC_VIEC BIT(11) /* VMEbus IRQ Edge */
+#define TSI148_LCSR_INTC_IACKC BIT(10) /* IACK */
+#define TSI148_LCSR_INTC_SYSFLC BIT(9) /* System Fail */
+#define TSI148_LCSR_INTC_ACFLC BIT(8) /* AC Fail */
static const int TSI148_LCSR_INTC_LMC[4] = { TSI148_LCSR_INTC_LM0C,
TSI148_LCSR_INTC_LM1C,
@@ -1192,15 +1192,15 @@ static const int TSI148_LCSR_INTC_MBC[4] = { TSI148_LCSR_INTC_MB0C,
/*
* DMA Control (0-1) Registers CRG + $500
*/
-#define TSI148_LCSR_DCTL_ABT (1<<27) /* Abort */
-#define TSI148_LCSR_DCTL_PAU (1<<26) /* Pause */
-#define TSI148_LCSR_DCTL_DGO (1<<25) /* DMA Go */
+#define TSI148_LCSR_DCTL_ABT BIT(27) /* Abort */
+#define TSI148_LCSR_DCTL_PAU BIT(26) /* Pause */
+#define TSI148_LCSR_DCTL_DGO BIT(25) /* DMA Go */
-#define TSI148_LCSR_DCTL_MOD (1<<23) /* Mode */
+#define TSI148_LCSR_DCTL_MOD BIT(23) /* Mode */
#define TSI148_LCSR_DCTL_VBKS_M (7<<12) /* VMEbus block Size MASK */
#define TSI148_LCSR_DCTL_VBKS_32 (0<<12) /* VMEbus block Size 32 */
-#define TSI148_LCSR_DCTL_VBKS_64 (1<<12) /* VMEbus block Size 64 */
+#define TSI148_LCSR_DCTL_VBKS_64 BIT(12) /* VMEbus block Size 64 */
#define TSI148_LCSR_DCTL_VBKS_128 (2<<12) /* VMEbus block Size 128 */
#define TSI148_LCSR_DCTL_VBKS_256 (3<<12) /* VMEbus block Size 256 */
#define TSI148_LCSR_DCTL_VBKS_512 (4<<12) /* VMEbus block Size 512 */
@@ -1210,7 +1210,7 @@ static const int TSI148_LCSR_INTC_MBC[4] = { TSI148_LCSR_INTC_MB0C,
#define TSI148_LCSR_DCTL_VBOT_M (7<<8) /* VMEbus back-off MASK */
#define TSI148_LCSR_DCTL_VBOT_0 (0<<8) /* VMEbus back-off 0us */
-#define TSI148_LCSR_DCTL_VBOT_1 (1<<8) /* VMEbus back-off 1us */
+#define TSI148_LCSR_DCTL_VBOT_1 BIT(8) /* VMEbus back-off 1us */
#define TSI148_LCSR_DCTL_VBOT_2 (2<<8) /* VMEbus back-off 2us */
#define TSI148_LCSR_DCTL_VBOT_4 (3<<8) /* VMEbus back-off 4us */
#define TSI148_LCSR_DCTL_VBOT_8 (4<<8) /* VMEbus back-off 8us */
@@ -1220,7 +1220,7 @@ static const int TSI148_LCSR_INTC_MBC[4] = { TSI148_LCSR_INTC_MB0C,
#define TSI148_LCSR_DCTL_PBKS_M (7<<4) /* PCI block size MASK */
#define TSI148_LCSR_DCTL_PBKS_32 (0<<4) /* PCI block size 32 bytes */
-#define TSI148_LCSR_DCTL_PBKS_64 (1<<4) /* PCI block size 64 bytes */
+#define TSI148_LCSR_DCTL_PBKS_64 BIT(4) /* PCI block size 64 bytes */
#define TSI148_LCSR_DCTL_PBKS_128 (2<<4) /* PCI block size 128 bytes */
#define TSI148_LCSR_DCTL_PBKS_256 (3<<4) /* PCI block size 256 bytes */
#define TSI148_LCSR_DCTL_PBKS_512 (4<<4) /* PCI block size 512 bytes */
@@ -1230,7 +1230,7 @@ static const int TSI148_LCSR_INTC_MBC[4] = { TSI148_LCSR_INTC_MB0C,
#define TSI148_LCSR_DCTL_PBOT_M (7<<0) /* PCI back off MASK */
#define TSI148_LCSR_DCTL_PBOT_0 (0<<0) /* PCI back off 0us */
-#define TSI148_LCSR_DCTL_PBOT_1 (1<<0) /* PCI back off 1us */
+#define TSI148_LCSR_DCTL_PBOT_1 BIT(0) /* PCI back off 1us */
#define TSI148_LCSR_DCTL_PBOT_2 (2<<0) /* PCI back off 2us */
#define TSI148_LCSR_DCTL_PBOT_4 (3<<0) /* PCI back off 3us */
#define TSI148_LCSR_DCTL_PBOT_8 (4<<0) /* PCI back off 4us */
@@ -1241,14 +1241,14 @@ static const int TSI148_LCSR_INTC_MBC[4] = { TSI148_LCSR_INTC_MB0C,
/*
* DMA Status Registers (0-1) CRG + $504
*/
-#define TSI148_LCSR_DSTA_SMA (1<<31) /* PCI Signalled Master Abt */
-#define TSI148_LCSR_DSTA_RTA (1<<30) /* PCI Received Target Abt */
-#define TSI148_LCSR_DSTA_MRC (1<<29) /* PCI Max Retry Count */
-#define TSI148_LCSR_DSTA_VBE (1<<28) /* VMEbus error */
-#define TSI148_LCSR_DSTA_ABT (1<<27) /* Abort */
-#define TSI148_LCSR_DSTA_PAU (1<<26) /* Pause */
-#define TSI148_LCSR_DSTA_DON (1<<25) /* Done */
-#define TSI148_LCSR_DSTA_BSY (1<<24) /* Busy */
+#define TSI148_LCSR_DSTA_SMA BIT(31) /* PCI Signalled Master Abt */
+#define TSI148_LCSR_DSTA_RTA BIT(30) /* PCI Received Target Abt */
+#define TSI148_LCSR_DSTA_MRC BIT(29) /* PCI Max Retry Count */
+#define TSI148_LCSR_DSTA_VBE BIT(28) /* VMEbus error */
+#define TSI148_LCSR_DSTA_ABT BIT(27) /* Abort */
+#define TSI148_LCSR_DSTA_PAU BIT(26) /* Pause */
+#define TSI148_LCSR_DSTA_DON BIT(25) /* Done */
+#define TSI148_LCSR_DSTA_BSY BIT(24) /* Busy */
/*
* DMA Current Link Address Lower (0-1)
@@ -1260,20 +1260,20 @@ static const int TSI148_LCSR_INTC_MBC[4] = { TSI148_LCSR_INTC_MB0C,
*/
#define TSI148_LCSR_DSAT_TYP_M (3<<28) /* Source Bus Type */
#define TSI148_LCSR_DSAT_TYP_PCI (0<<28) /* PCI Bus */
-#define TSI148_LCSR_DSAT_TYP_VME (1<<28) /* VMEbus */
+#define TSI148_LCSR_DSAT_TYP_VME BIT(28) /* VMEbus */
#define TSI148_LCSR_DSAT_TYP_PAT (2<<28) /* Data Pattern */
-#define TSI148_LCSR_DSAT_PSZ (1<<25) /* Pattern Size */
-#define TSI148_LCSR_DSAT_NIN (1<<24) /* No Increment */
+#define TSI148_LCSR_DSAT_PSZ BIT(25) /* Pattern Size */
+#define TSI148_LCSR_DSAT_NIN BIT(24) /* No Increment */
#define TSI148_LCSR_DSAT_2eSSTM_M (3<<11) /* 2eSST Trans Rate Mask */
#define TSI148_LCSR_DSAT_2eSSTM_160 (0<<11) /* 160 MB/s */
-#define TSI148_LCSR_DSAT_2eSSTM_267 (1<<11) /* 267 MB/s */
+#define TSI148_LCSR_DSAT_2eSSTM_267 BIT(11) /* 267 MB/s */
#define TSI148_LCSR_DSAT_2eSSTM_320 (2<<11) /* 320 MB/s */
#define TSI148_LCSR_DSAT_TM_M (7<<8) /* Bus Transfer Protocol Mask */
#define TSI148_LCSR_DSAT_TM_SCT (0<<8) /* SCT */
-#define TSI148_LCSR_DSAT_TM_BLT (1<<8) /* BLT */
+#define TSI148_LCSR_DSAT_TM_BLT BIT(8) /* BLT */
#define TSI148_LCSR_DSAT_TM_MBLT (2<<8) /* MBLT */
#define TSI148_LCSR_DSAT_TM_2eVME (3<<8) /* 2eVME */
#define TSI148_LCSR_DSAT_TM_2eSST (4<<8) /* 2eSST */
@@ -1281,14 +1281,14 @@ static const int TSI148_LCSR_INTC_MBC[4] = { TSI148_LCSR_INTC_MB0C,
#define TSI148_LCSR_DSAT_DBW_M (3<<6) /* Max Data Width MASK */
#define TSI148_LCSR_DSAT_DBW_16 (0<<6) /* 16 Bits */
-#define TSI148_LCSR_DSAT_DBW_32 (1<<6) /* 32 Bits */
+#define TSI148_LCSR_DSAT_DBW_32 BIT(6) /* 32 Bits */
-#define TSI148_LCSR_DSAT_SUP (1<<5) /* Supervisory Mode */
-#define TSI148_LCSR_DSAT_PGM (1<<4) /* Program Mode */
+#define TSI148_LCSR_DSAT_SUP BIT(5) /* Supervisory Mode */
+#define TSI148_LCSR_DSAT_PGM BIT(4) /* Program Mode */
#define TSI148_LCSR_DSAT_AMODE_M (0xf<<0) /* Address Space Mask */
#define TSI148_LCSR_DSAT_AMODE_A16 (0<<0) /* A16 */
-#define TSI148_LCSR_DSAT_AMODE_A24 (1<<0) /* A24 */
+#define TSI148_LCSR_DSAT_AMODE_A24 BIT(0) /* A24 */
#define TSI148_LCSR_DSAT_AMODE_A32 (2<<0) /* A32 */
#define TSI148_LCSR_DSAT_AMODE_A64 (4<<0) /* A64 */
#define TSI148_LCSR_DSAT_AMODE_CRCSR (5<<0) /* CR/CSR */
@@ -1301,16 +1301,16 @@ static const int TSI148_LCSR_INTC_MBC[4] = { TSI148_LCSR_INTC_MB0C,
* DMA Destination Attribute Registers (0-1)
*/
#define TSI148_LCSR_DDAT_TYP_PCI (0<<28) /* Destination PCI Bus */
-#define TSI148_LCSR_DDAT_TYP_VME (1<<28) /* Destination VMEbus */
+#define TSI148_LCSR_DDAT_TYP_VME BIT(28) /* Destination VMEbus */
#define TSI148_LCSR_DDAT_2eSSTM_M (3<<11) /* 2eSST Transfer Rate Mask */
#define TSI148_LCSR_DDAT_2eSSTM_160 (0<<11) /* 160 MB/s */
-#define TSI148_LCSR_DDAT_2eSSTM_267 (1<<11) /* 267 MB/s */
+#define TSI148_LCSR_DDAT_2eSSTM_267 BIT(11) /* 267 MB/s */
#define TSI148_LCSR_DDAT_2eSSTM_320 (2<<11) /* 320 MB/s */
#define TSI148_LCSR_DDAT_TM_M (7<<8) /* Bus Transfer Protocol Mask */
#define TSI148_LCSR_DDAT_TM_SCT (0<<8) /* SCT */
-#define TSI148_LCSR_DDAT_TM_BLT (1<<8) /* BLT */
+#define TSI148_LCSR_DDAT_TM_BLT BIT(8) /* BLT */
#define TSI148_LCSR_DDAT_TM_MBLT (2<<8) /* MBLT */
#define TSI148_LCSR_DDAT_TM_2eVME (3<<8) /* 2eVME */
#define TSI148_LCSR_DDAT_TM_2eSST (4<<8) /* 2eSST */
@@ -1318,14 +1318,14 @@ static const int TSI148_LCSR_INTC_MBC[4] = { TSI148_LCSR_INTC_MB0C,
#define TSI148_LCSR_DDAT_DBW_M (3<<6) /* Max Data Width MASK */
#define TSI148_LCSR_DDAT_DBW_16 (0<<6) /* 16 Bits */
-#define TSI148_LCSR_DDAT_DBW_32 (1<<6) /* 32 Bits */
+#define TSI148_LCSR_DDAT_DBW_32 BIT(6) /* 32 Bits */
-#define TSI148_LCSR_DDAT_SUP (1<<5) /* Supervisory/User Access */
-#define TSI148_LCSR_DDAT_PGM (1<<4) /* Program/Data Access */
+#define TSI148_LCSR_DDAT_SUP BIT(5) /* Supervisory/User Access */
+#define TSI148_LCSR_DDAT_PGM BIT(4) /* Program/Data Access */
#define TSI148_LCSR_DDAT_AMODE_M (0xf<<0) /* Address Space Mask */
#define TSI148_LCSR_DDAT_AMODE_A16 (0<<0) /* A16 */
-#define TSI148_LCSR_DDAT_AMODE_A24 (1<<0) /* A24 */
+#define TSI148_LCSR_DDAT_AMODE_A24 BIT(0) /* A24 */
#define TSI148_LCSR_DDAT_AMODE_A32 (2<<0) /* A32 */
#define TSI148_LCSR_DDAT_AMODE_A64 (4<<0) /* A64 */
#define TSI148_LCSR_DDAT_AMODE_CRCSR (5<<0) /* CRC/SR */
@@ -1338,7 +1338,7 @@ static const int TSI148_LCSR_INTC_MBC[4] = { TSI148_LCSR_INTC_MB0C,
* DMA Next Link Address Lower
*/
#define TSI148_LCSR_DNLAL_DNLAL_M (0x3FFFFFF<<6) /* Address Mask */
-#define TSI148_LCSR_DNLAL_LLA (1<<0) /* Last Link Address Indicator */
+#define TSI148_LCSR_DNLAL_LLA BIT(0) /* Last Link Address Indicator */
/*
* DMA 2eSST Broadcast Select
@@ -1352,22 +1352,22 @@ static const int TSI148_LCSR_INTC_MBC[4] = { TSI148_LCSR_INTC_MB0C,
/*
* GCSR Control and Status Register CRG + $604
*/
-#define TSI148_GCSR_GCTRL_LRST (1<<15) /* Local Reset */
-#define TSI148_GCSR_GCTRL_SFAILEN (1<<14) /* System Fail enable */
-#define TSI148_GCSR_GCTRL_BDFAILS (1<<13) /* Board Fail Status */
-#define TSI148_GCSR_GCTRL_SCON (1<<12) /* System Copntroller */
-#define TSI148_GCSR_GCTRL_MEN (1<<11) /* Module Enable (READY) */
-
-#define TSI148_GCSR_GCTRL_LMI3S (1<<7) /* Loc Monitor 3 Int Status */
-#define TSI148_GCSR_GCTRL_LMI2S (1<<6) /* Loc Monitor 2 Int Status */
-#define TSI148_GCSR_GCTRL_LMI1S (1<<5) /* Loc Monitor 1 Int Status */
-#define TSI148_GCSR_GCTRL_LMI0S (1<<4) /* Loc Monitor 0 Int Status */
-#define TSI148_GCSR_GCTRL_MBI3S (1<<3) /* Mail box 3 Int Status */
-#define TSI148_GCSR_GCTRL_MBI2S (1<<2) /* Mail box 2 Int Status */
-#define TSI148_GCSR_GCTRL_MBI1S (1<<1) /* Mail box 1 Int Status */
-#define TSI148_GCSR_GCTRL_MBI0S (1<<0) /* Mail box 0 Int Status */
-
-#define TSI148_GCSR_GAP (1<<5) /* Geographic Addr Parity */
+#define TSI148_GCSR_GCTRL_LRST BIT(15) /* Local Reset */
+#define TSI148_GCSR_GCTRL_SFAILEN BIT(14) /* System Fail enable */
+#define TSI148_GCSR_GCTRL_BDFAILS BIT(13) /* Board Fail Status */
+#define TSI148_GCSR_GCTRL_SCON BIT(12) /* System Copntroller */
+#define TSI148_GCSR_GCTRL_MEN BIT(11) /* Module Enable (READY) */
+
+#define TSI148_GCSR_GCTRL_LMI3S BIT(7) /* Loc Monitor 3 Int Status */
+#define TSI148_GCSR_GCTRL_LMI2S BIT(6) /* Loc Monitor 2 Int Status */
+#define TSI148_GCSR_GCTRL_LMI1S BIT(5) /* Loc Monitor 1 Int Status */
+#define TSI148_GCSR_GCTRL_LMI0S BIT(4) /* Loc Monitor 0 Int Status */
+#define TSI148_GCSR_GCTRL_MBI3S BIT(3) /* Mail box 3 Int Status */
+#define TSI148_GCSR_GCTRL_MBI2S BIT(2) /* Mail box 2 Int Status */
+#define TSI148_GCSR_GCTRL_MBI1S BIT(1) /* Mail box 1 Int Status */
+#define TSI148_GCSR_GCTRL_MBI0S BIT(0) /* Mail box 0 Int Status */
+
+#define TSI148_GCSR_GAP BIT(5) /* Geographic Addr Parity */
#define TSI148_GCSR_GA_M (0x1F<<0) /* Geographic Address Mask */
/*
@@ -1377,20 +1377,20 @@ static const int TSI148_LCSR_INTC_MBC[4] = { TSI148_LCSR_INTC_MB0C,
/*
* CR/CSR Bit Clear Register CRG + $FF4
*/
-#define TSI148_CRCSR_CSRBCR_LRSTC (1<<7) /* Local Reset Clear */
-#define TSI148_CRCSR_CSRBCR_SFAILC (1<<6) /* System Fail Enable Clear */
-#define TSI148_CRCSR_CSRBCR_BDFAILS (1<<5) /* Board Fail Status */
-#define TSI148_CRCSR_CSRBCR_MENC (1<<4) /* Module Enable Clear */
-#define TSI148_CRCSR_CSRBCR_BERRSC (1<<3) /* Bus Error Status Clear */
+#define TSI148_CRCSR_CSRBCR_LRSTC BIT(7) /* Local Reset Clear */
+#define TSI148_CRCSR_CSRBCR_SFAILC BIT(6) /* System Fail Enable Clear */
+#define TSI148_CRCSR_CSRBCR_BDFAILS BIT(5) /* Board Fail Status */
+#define TSI148_CRCSR_CSRBCR_MENC BIT(4) /* Module Enable Clear */
+#define TSI148_CRCSR_CSRBCR_BERRSC BIT(3) /* Bus Error Status Clear */
/*
* CR/CSR Bit Set Register CRG+$FF8
*/
-#define TSI148_CRCSR_CSRBSR_LISTS (1<<7) /* Local Reset Clear */
-#define TSI148_CRCSR_CSRBSR_SFAILS (1<<6) /* System Fail Enable Clear */
-#define TSI148_CRCSR_CSRBSR_BDFAILS (1<<5) /* Board Fail Status */
-#define TSI148_CRCSR_CSRBSR_MENS (1<<4) /* Module Enable Clear */
-#define TSI148_CRCSR_CSRBSR_BERRS (1<<3) /* Bus Error Status Clear */
+#define TSI148_CRCSR_CSRBSR_LISTS BIT(7) /* Local Reset Clear */
+#define TSI148_CRCSR_CSRBSR_SFAILS BIT(6) /* System Fail Enable Clear */
+#define TSI148_CRCSR_CSRBSR_BDFAILS BIT(5) /* Board Fail Status */
+#define TSI148_CRCSR_CSRBSR_MENS BIT(4) /* Module Enable Clear */
+#define TSI148_CRCSR_CSRBSR_BERRS BIT(3) /* Bus Error Status Clear */
/*
* CR/CSR Base Address Register CRG + FFC
--
2.31.1
On Thu, Mar 23, 2023 at 06:34:54PM +0530, Abhirup Deb wrote:
> Replace the "<<" operator with BIT macro, in accordance to the
> checkpatch.pl script and Linux kernel coding-style guidelines.
>
> Signed-off-by: Abhirup Deb <[email protected]>
> ---
> Changes in v2:
> - Refactor the patch & Replace the erroneous BIT macro in --
> "#define TSI148_PCFS_STAT_SELTIM BIT(9)"
> with --
> "#define TSI148_PCFS_STAT_SELTIM (3<<9)"
>
Why did you resend this?
regards,
dan carpenter
On Thu, Mar 23, 2023 at 04:34:06PM +0300, Dan Carpenter wrote:
> On Thu, Mar 23, 2023 at 06:34:54PM +0530, Abhirup Deb wrote:
> > Replace the "<<" operator with BIT macro, in accordance to the
> > checkpatch.pl script and Linux kernel coding-style guidelines.
> >
> > Signed-off-by: Abhirup Deb <[email protected]>
> > ---
> > Changes in v2:
> > - Refactor the patch & Replace the erroneous BIT macro in --
> > "#define TSI148_PCFS_STAT_SELTIM BIT(9)"
> > with --
> > "#define TSI148_PCFS_STAT_SELTIM (3<<9)"
> >
>
> Why did you resend this?
>
> regards,
> dan carpenter
>
Hey Dan,
Sorry,did not mean to spam! Mistake on my part!
Regards,
Abhirup Deb