2023-03-21 19:18:07

by Werner Sembach

Subject: [PATCH v3] Input: i8042 - add TUXEDO devices to i8042 quirk tables for partial fix

A lot of modern Clevo barebones have touchpad and/or keyboard issues after
suspend fixable with nomux + reset + noloop + nopnp. Luckily, none of them
have an external PS/2 port so this can safely be set for all of them.

I'm not entirely sure if every device listed really needs all four quirks,
but after testing and production use. No negative effects could be
observed when setting all four.

Setting SERIO_QUIRK_NOMUX or SERIO_QUIRK_RESET_ALWAYS on the Clevo N150CU
and the Clevo NHxxRZQ makes the keyboard very laggy for ~5 seconds after
boot and sometimes also after resume. However both are required for the
keyboard to not fail completely sometimes after boot or resume.

Signed-off-by: Werner Sembach <[email protected]>
Cc: [email protected]
---
drivers/input/serio/i8042-acpipnpio.h | 28 +++++++++++++++++++++++++++
1 file changed, 28 insertions(+)

diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h
index efc61736099b9..371406f85ab39 100644
--- a/drivers/input/serio/i8042-acpipnpio.h
+++ b/drivers/input/serio/i8042-acpipnpio.h
@@ -1116,6 +1116,20 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
},
+ {
+ /*
+ * Setting SERIO_QUIRK_NOMUX or SERIO_QUIRK_RESET_ALWAYS makes
+ * the keyboard very laggy for ~5 seconds after boot and
+ * sometimes also after resume.
+ * However both are required for the keyboard to not fail
+ * completely sometimes after boot or resume.
+ */
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "N150CU"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
{
.matches = {
DMI_MATCH(DMI_BOARD_NAME, "NH5xAx"),
@@ -1123,6 +1137,20 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
},
+ {
+ /*
+ * Setting SERIO_QUIRK_NOMUX or SERIO_QUIRK_RESET_ALWAYS makes
+ * the keyboard very laggy for ~5 seconds after boot and
+ * sometimes also after resume.
+ * However both are required for the keyboard to not fail
+ * completely sometimes after boot or resume.
+ */
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "NHxxRZQ"),
+ },
+ .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
+ SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
+ },
{
.matches = {
DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
--
2.34.1

2023-03-24 01:20:40

by Dmitry Torokhov

Subject: Re: [PATCH v3] Input: i8042 - add TUXEDO devices to i8042 quirk tables for partial fix

On Tue, Mar 21, 2023 at 08:16:19PM +0100, Werner Sembach wrote:
> A lot of modern Clevo barebones have touchpad and/or keyboard issues after
> suspend fixable with nomux + reset + noloop + nopnp. Luckily, none of them
> have an external PS/2 port so this can safely be set for all of them.
>
> I'm not entirely sure if every device listed really needs all four quirks,
> but after testing and production use. No negative effects could be
> observed when setting all four.
>
> Setting SERIO_QUIRK_NOMUX or SERIO_QUIRK_RESET_ALWAYS on the Clevo N150CU
> and the Clevo NHxxRZQ makes the keyboard very laggy for ~5 seconds after
> boot and sometimes also after resume. However both are required for the
> keyboard to not fail completely sometimes after boot or resume.
>
> Signed-off-by: Werner Sembach <[email protected]>
> Cc: [email protected]

Applied, thank you.

--
Dmitry