This is a small prepatory step for changing the way this driver does
its I/O accesses.
Signed-off-by: Zev Weiss <[email protected]>
---
drivers/tty/serial/8250/8250_aspeed_vuart.c | 38 +++++++++++++--------
1 file changed, 24 insertions(+), 14 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c
index 61550f24a2d3..9e8b2e8e32b6 100644
--- a/drivers/tty/serial/8250/8250_aspeed_vuart.c
+++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
@@ -64,14 +64,24 @@ static const int unthrottle_timeout = HZ/10;
* different system (though most of them use 3f8/4).
*/
+static inline u8 aspeed_vuart_readb(struct aspeed_vuart *vuart, u8 reg)
+{
+ return readb(vuart->regs + reg);
+}
+
+static inline void aspeed_vuart_writeb(struct aspeed_vuart *vuart, u8 val, u8 reg)
+{
+ writeb(val, vuart->regs + reg);
+}
+
static ssize_t lpc_address_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct aspeed_vuart *vuart = dev_get_drvdata(dev);
u16 addr;
- addr = (readb(vuart->regs + ASPEED_VUART_ADDRH) << 8) |
- (readb(vuart->regs + ASPEED_VUART_ADDRL));
+ addr = (aspeed_vuart_readb(vuart, ASPEED_VUART_ADDRH) << 8) |
+ (aspeed_vuart_readb(vuart, ASPEED_VUART_ADDRL));
return snprintf(buf, PAGE_SIZE - 1, "0x%x\n", addr);
}
@@ -81,8 +91,8 @@ static int aspeed_vuart_set_lpc_address(struct aspeed_vuart *vuart, u32 addr)
if (addr > U16_MAX)
return -EINVAL;
- writeb(addr >> 8, vuart->regs + ASPEED_VUART_ADDRH);
- writeb(addr >> 0, vuart->regs + ASPEED_VUART_ADDRL);
+ aspeed_vuart_writeb(vuart, addr >> 8, ASPEED_VUART_ADDRH);
+ aspeed_vuart_writeb(vuart, addr >> 0, ASPEED_VUART_ADDRL);
return 0;
}
@@ -111,7 +121,7 @@ static ssize_t sirq_show(struct device *dev,
struct aspeed_vuart *vuart = dev_get_drvdata(dev);
u8 reg;
- reg = readb(vuart->regs + ASPEED_VUART_GCRB);
+ reg = aspeed_vuart_readb(vuart, ASPEED_VUART_GCRB);
reg &= ASPEED_VUART_GCRB_HOST_SIRQ_MASK;
reg >>= ASPEED_VUART_GCRB_HOST_SIRQ_SHIFT;
@@ -128,10 +138,10 @@ static int aspeed_vuart_set_sirq(struct aspeed_vuart *vuart, u32 sirq)
sirq <<= ASPEED_VUART_GCRB_HOST_SIRQ_SHIFT;
sirq &= ASPEED_VUART_GCRB_HOST_SIRQ_MASK;
- reg = readb(vuart->regs + ASPEED_VUART_GCRB);
+ reg = aspeed_vuart_readb(vuart, ASPEED_VUART_GCRB);
reg &= ~ASPEED_VUART_GCRB_HOST_SIRQ_MASK;
reg |= sirq;
- writeb(reg, vuart->regs + ASPEED_VUART_GCRB);
+ aspeed_vuart_writeb(vuart, reg, ASPEED_VUART_GCRB);
return 0;
}
@@ -159,7 +169,7 @@ static ssize_t sirq_polarity_show(struct device *dev,
struct aspeed_vuart *vuart = dev_get_drvdata(dev);
u8 reg;
- reg = readb(vuart->regs + ASPEED_VUART_GCRA);
+ reg = aspeed_vuart_readb(vuart, ASPEED_VUART_GCRA);
reg &= ASPEED_VUART_GCRA_HOST_SIRQ_POLARITY;
return snprintf(buf, PAGE_SIZE - 1, "%u\n", reg ? 1 : 0);
@@ -168,14 +178,14 @@ static ssize_t sirq_polarity_show(struct device *dev,
static void aspeed_vuart_set_sirq_polarity(struct aspeed_vuart *vuart,
bool polarity)
{
- u8 reg = readb(vuart->regs + ASPEED_VUART_GCRA);
+ u8 reg = aspeed_vuart_readb(vuart, ASPEED_VUART_GCRA);
if (polarity)
reg |= ASPEED_VUART_GCRA_HOST_SIRQ_POLARITY;
else
reg &= ~ASPEED_VUART_GCRA_HOST_SIRQ_POLARITY;
- writeb(reg, vuart->regs + ASPEED_VUART_GCRA);
+ aspeed_vuart_writeb(vuart, reg, ASPEED_VUART_GCRA);
}
static ssize_t sirq_polarity_store(struct device *dev,
@@ -210,14 +220,14 @@ static const struct attribute_group aspeed_vuart_attr_group = {
static void aspeed_vuart_set_enabled(struct aspeed_vuart *vuart, bool enabled)
{
- u8 reg = readb(vuart->regs + ASPEED_VUART_GCRA);
+ u8 reg = aspeed_vuart_readb(vuart, ASPEED_VUART_GCRA);
if (enabled)
reg |= ASPEED_VUART_GCRA_VUART_EN;
else
reg &= ~ASPEED_VUART_GCRA_VUART_EN;
- writeb(reg, vuart->regs + ASPEED_VUART_GCRA);
+ aspeed_vuart_writeb(vuart, reg, ASPEED_VUART_GCRA);
}
static void aspeed_vuart_set_host_tx_discard(struct aspeed_vuart *vuart,
@@ -225,7 +235,7 @@ static void aspeed_vuart_set_host_tx_discard(struct aspeed_vuart *vuart,
{
u8 reg;
- reg = readb(vuart->regs + ASPEED_VUART_GCRA);
+ reg = aspeed_vuart_readb(vuart, ASPEED_VUART_GCRA);
/* If the DISABLE_HOST_TX_DISCARD bit is set, discard is disabled */
if (!discard)
@@ -233,7 +243,7 @@ static void aspeed_vuart_set_host_tx_discard(struct aspeed_vuart *vuart,
else
reg &= ~ASPEED_VUART_GCRA_DISABLE_HOST_TX_DISCARD;
- writeb(reg, vuart->regs + ASPEED_VUART_GCRA);
+ aspeed_vuart_writeb(vuart, reg, ASPEED_VUART_GCRA);
}
static int aspeed_vuart_startup(struct uart_port *uart_port)
--
2.31.1
On Mon, 10 May 2021, at 11:12, Zev Weiss wrote:
> This is a small prepatory step for changing the way this driver does
> its I/O accesses.
>
> Signed-off-by: Zev Weiss <[email protected]>
Reviewed-by: Andrew Jeffery <[email protected]>