On 28/11/17 14:35, Greg Kroah-Hartman wrote:
> On Wed, Nov 22, 2017 at 09:57:29AM +0000, Matt Redfearn wrote:
>> Add a custom serial.h header for MIPS, allowing platforms to override
>> the asm-generic version if required.
>>
>> The generic platform uses this header to set BASE_BAUD to 0. The
>> generic platform supports multiple boards, which may have different
>> UART clocks. Also one of the boards supported is the Boston FPGA board,
>> where the UART clock depends on the loaded FPGA bitfile. As such there
>> is no way that the generic kernel can set a compile time default
>> BASE_BAUD.
>>
>> Commit 31cb9a8575ca ("earlycon: initialise baud field of earlycon device
>> structure") changed the behavior of of_setup_earlycon such that any baud
>> rate set in the device tree is now set in the earlycon structure. The
>> UART driver will then calculate a divisor based on BASE_BAUD and set it.
>> With MIPS generic kernels this resulted in garbage output due to the
>> incorrect uart clock rate being used to calculate a divisor. This
>> commit, combined with "serial: 8250_early: Only set divisor if valid clk
>> & baud" prevents the earlycon code setting a bad divisor and restores
>> earlycon output.
>>
>> Fixes: 31cb9a8575ca ("earlycon: initialise baud field of earlycon device structure")
>> Cc: stable <[email protected]> # 4.14
>> Signed-off-by: Matt Redfearn <[email protected]>
>>
>> ---
>>
>> arch/mips/include/asm/Kbuild | 1 -
>> arch/mips/include/asm/serial.h | 21 +++++++++++++++++++++
>> 2 files changed, 21 insertions(+), 1 deletion(-)
>> create mode 100644 arch/mips/include/asm/serial.h
>>
>> diff --git a/arch/mips/include/asm/Kbuild b/arch/mips/include/asm/Kbuild
>> index 7c8aab23bce8..b1f66699677d 100644
>> --- a/arch/mips/include/asm/Kbuild
>> +++ b/arch/mips/include/asm/Kbuild
>> @@ -16,7 +16,6 @@ generic-y += qrwlock.h
>> generic-y += qspinlock.h
>> generic-y += sections.h
>> generic-y += segment.h
>> -generic-y += serial.h
>> generic-y += trace_clock.h
>> generic-y += unaligned.h
>> generic-y += user.h
>> diff --git a/arch/mips/include/asm/serial.h b/arch/mips/include/asm/serial.h
>> new file mode 100644
>> index 000000000000..30be5cd8efdb
>> --- /dev/null
>> +++ b/arch/mips/include/asm/serial.h
>> @@ -0,0 +1,21 @@
>> +/*
>> + * This file is subject to the terms and conditions of the GNU General Public
>> + * License. See the file "COPYING" in the main directory of this archive
>> + * for more details.
>
> Which version of the GPL? As it is, this means "GPL v1 and all others".
>
> I doubt you want that :)
Good point - thanks!
Matt
>
> thanks,
>
> greg k-h
>
From 1585320905356764073@xxx Tue Nov 28 14:37:10 +0000 2017
X-GM-THRID: 1584759954610254092
X-Gmail-Labels: Inbox,Category Forums,HistoricalUnread