2022-11-08 07:38:05

by Bhavya Kapoor

[permalink] [raw]
Subject: [PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes

J721S2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes
for 8 channel ADCs for J721S2.

Enable ADCs present on J721S2 soc.

Signed-off-by: Bhavya Kapoor <[email protected]>
---
.../dts/ti/k3-j721s2-common-proc-board.dts | 14 +++++++
.../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 40 +++++++++++++++++++
2 files changed, 54 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
index b210cc07c539..de9cb40273be 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
@@ -429,3 +429,17 @@
&main_mcan17 {
status = "disabled";
};
+
+&tscadc0 {
+ status = "okay";
+ adc {
+ ti,adc-channels = <0 1 2 3 4 5 6 7>;
+ };
+};
+
+&tscadc1 {
+ status = "okay";
+ adc {
+ ti,adc-channels = <0 1 2 3 4 5 6 7>;
+ };
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index 4d1bfabd1313..47a7a6b500c2 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -299,4 +299,44 @@
ti,cpts-periodic-outputs = <2>;
};
};
+
+ tscadc0: tscadc@40200000 {
+ compatible = "ti,am3359-tscadc";
+ reg = <0x0 0x40200000 0x0 0x1000>;
+ interrupts = <GIC_SPI 892 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 0 0>;
+ assigned-clocks = <&k3_clks 0 2>;
+ assigned-clock-rates = <60000000>;
+ clock-names = "adc_tsc_fck";
+ dmas = <&main_udmap 0x7400>,
+ <&main_udmap 0x7401>;
+ dma-names = "fifo0", "fifo1";
+ status = "disabled";
+
+ adc {
+ #io-channel-cells = <1>;
+ compatible = "ti,am3359-adc";
+ };
+ };
+
+ tscadc1: tscadc@40210000 {
+ compatible = "ti,am3359-tscadc";
+ reg = <0x0 0x40210000 0x0 0x1000>;
+ interrupts = <GIC_SPI 893 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&k3_pds 1 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 1 0>;
+ assigned-clocks = <&k3_clks 1 2>;
+ assigned-clock-rates = <60000000>;
+ clock-names = "adc_tsc_fck";
+ dmas = <&main_udmap 0x7402>,
+ <&main_udmap 0x7403>;
+ dma-names = "fifo0", "fifo1";
+ status = "disabled";
+
+ adc {
+ #io-channel-cells = <1>;
+ compatible = "ti,am3359-adc";
+ };
+ };
};
--
2.20.1



2022-11-08 18:26:09

by Krzysztof Kozlowski

[permalink] [raw]
Subject: Re: [PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes

On 08/11/2022 08:32, Bhavya Kapoor wrote:
> J721S2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes
> for 8 channel ADCs for J721S2.
>
> Enable ADCs present on J721S2 soc.
>
> Signed-off-by: Bhavya Kapoor <[email protected]>
> ---
> .../dts/ti/k3-j721s2-common-proc-board.dts | 14 +++++++
> .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 40 +++++++++++++++++++
> 2 files changed, 54 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
> index b210cc07c539..de9cb40273be 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
> @@ -429,3 +429,17 @@
> &main_mcan17 {
> status = "disabled";
> };
> +
> +&tscadc0 {
> + status = "okay";
> + adc {
> + ti,adc-channels = <0 1 2 3 4 5 6 7>;
> + };
> +};
> +
> +&tscadc1 {
> + status = "okay";
> + adc {
> + ti,adc-channels = <0 1 2 3 4 5 6 7>;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> index 4d1bfabd1313..47a7a6b500c2 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> @@ -299,4 +299,44 @@
> ti,cpts-periodic-outputs = <2>;
> };
> };
> +
> + tscadc0: tscadc@40200000 {

Node names should be generic, so "adc"
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

Best regards,
Krzysztof


2022-11-09 06:58:02

by Bhavya Kapoor

[permalink] [raw]
Subject: Re: [EXTERNAL] Re: [PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes

On 11/8/22 11:48 PM, Krzysztof Kozlowski wrote:
> On 08/11/2022 08:32, Bhavya Kapoor wrote:
>> J721S2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes
>> for 8 channel ADCs for J721S2.
>>
>> Enable ADCs present on J721S2 soc.
>>
>> Signed-off-by: Bhavya Kapoor <[email protected]>
>> ---
>> .../dts/ti/k3-j721s2-common-proc-board.dts | 14 +++++++
>> .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 40 +++++++++++++++++++
>> 2 files changed, 54 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>> index b210cc07c539..de9cb40273be 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>> @@ -429,3 +429,17 @@
>> &main_mcan17 {
>> status = "disabled";
>> };
>> +
>> +&tscadc0 {
>> + status = "okay";
>> + adc {
>> + ti,adc-channels = <0 1 2 3 4 5 6 7>;
>> + };
>> +};
>> +
>> +&tscadc1 {
>> + status = "okay";
>> + adc {
>> + ti,adc-channels = <0 1 2 3 4 5 6 7>;
>> + };
>> +};
>> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
>> index 4d1bfabd1313..47a7a6b500c2 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
>> @@ -299,4 +299,44 @@
>> ti,cpts-periodic-outputs = <2>;
>> };
>> };
>> +
>> + tscadc0: tscadc@40200000 {
> Node names should be generic, so "adc"
> https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

tscadc is just a wrapper node. The actual adc node is inside of tscadc node.

>
> Best regards,
> Krzysztof
>
Regards

BK


2022-12-20 10:06:52

by Bhavya Kapoor

[permalink] [raw]
Subject: Re: [EXTERNAL] Re: [PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes

Hi, please drop this patch since the interrupt values supplied for
tscadc are incorrect.

On 08/11/22 23:48, Krzysztof Kozlowski wrote:
> On 08/11/2022 08:32, Bhavya Kapoor wrote:
>> J721S2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes
>> for 8 channel ADCs for J721S2.
>>
>> Enable ADCs present on J721S2 soc.
>>
>> Signed-off-by: Bhavya Kapoor <[email protected]>
>> ---
>> .../dts/ti/k3-j721s2-common-proc-board.dts | 14 +++++++
>> .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 40 +++++++++++++++++++
>> 2 files changed, 54 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>> index b210cc07c539..de9cb40273be 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>> @@ -429,3 +429,17 @@
>> &main_mcan17 {
>> status = "disabled";
>> };
>> +
>> +&tscadc0 {
>> + status = "okay";
>> + adc {
>> + ti,adc-channels = <0 1 2 3 4 5 6 7>;
>> + };
>> +};
>> +
>> +&tscadc1 {
>> + status = "okay";
>> + adc {
>> + ti,adc-channels = <0 1 2 3 4 5 6 7>;
>> + };
>> +};
>> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
>> index 4d1bfabd1313..47a7a6b500c2 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
>> @@ -299,4 +299,44 @@
>> ti,cpts-periodic-outputs = <2>;
>> };
>> };
>> +
>> + tscadc0: tscadc@40200000 {
> Node names should be generic, so "adc"
> https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
>
> Best regards,
> Krzysztof
>