This enables drivers for STM32 timer, low power timer and analog hardware
that can be used on STM32MP1 SoC:
- Timer & LP Timer MFD core, PWM, trigger & encoder drivers
- IIO ADC/DAC/DFSDM
- vrefbuf regu driver (voltage reference buffer).
Signed-off-by: Fabrice Gasnier <[email protected]>
---
arch/arm/configs/multi_v7_defconfig | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index e6b3c96..40f5dd8 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -535,6 +535,7 @@ CONFIG_MFD_TPS65217=y
CONFIG_MFD_TPS65218=y
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
+CONFIG_MFD_STM32_LPTIMER=y
CONFIG_REGULATOR_ACT8945A=y
CONFIG_REGULATOR_AB8500=y
CONFIG_REGULATOR_ACT8865=y
@@ -567,6 +568,7 @@ CONFIG_REGULATOR_QCOM_SMD_RPM=y
CONFIG_REGULATOR_RN5T618=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=y
+CONFIG_REGULATOR_STM32_VREFBUF=y
CONFIG_REGULATOR_TI_ABB=y
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS62360=y
@@ -935,13 +937,19 @@ CONFIG_AT91_SAMA5D2_ADC=m
CONFIG_BERLIN2_ADC=m
CONFIG_CPCAP_ADC=m
CONFIG_EXYNOS_ADC=m
+CONFIG_STM32_ADC_CORE=y
+CONFIG_STM32_ADC=y
+CONFIG_STM32_DFSDM_ADC=y
CONFIG_VF610_ADC=m
CONFIG_XILINX_XADC=y
+CONFIG_STM32_LPTIMER_CNT=y
+CONFIG_STM32_DAC=y
CONFIG_MPU3050_I2C=y
CONFIG_CM36651=m
CONFIG_AK8975=y
CONFIG_RASPBERRYPI_POWER=y
CONFIG_IIO_HRTIMER_TRIGGER=y
+CONFIG_IIO_STM32_LPTIMER_TRIGGER=y
CONFIG_PWM=y
CONFIG_PWM_ATMEL=m
CONFIG_PWM_ATMEL_HLCDC_PWM=m
@@ -951,6 +959,8 @@ CONFIG_PWM_RCAR=m
CONFIG_PWM_RENESAS_TPU=y
CONFIG_PWM_ROCKCHIP=m
CONFIG_PWM_SAMSUNG=m
+CONFIG_PWM_STM32=y
+CONFIG_PWM_STM32_LP=y
CONFIG_PWM_SUN4I=y
CONFIG_PWM_TEGRA=y
CONFIG_PWM_VT8500=y
--
1.9.1
Hi Fabrice,
On 05/02/2018 05:24 PM, Fabrice Gasnier wrote:
> This enables drivers for STM32 timer, low power timer and analog hardware
> that can be used on STM32MP1 SoC:
> - Timer & LP Timer MFD core, PWM, trigger & encoder drivers
> - IIO ADC/DAC/DFSDM
> - vrefbuf regu driver (voltage reference buffer).
>
> Signed-off-by: Fabrice Gasnier <[email protected]>
> ---
> arch/arm/configs/multi_v7_defconfig | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
Applied on stm32-next.
Arnd,
Do you agree if I take multi_v7_defconfig related patches in my stm32
pull requests ?
Thanks.
Alex
> diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
> index e6b3c96..40f5dd8 100644
> --- a/arch/arm/configs/multi_v7_defconfig
> +++ b/arch/arm/configs/multi_v7_defconfig
> @@ -535,6 +535,7 @@ CONFIG_MFD_TPS65217=y
> CONFIG_MFD_TPS65218=y
> CONFIG_MFD_TPS6586X=y
> CONFIG_MFD_TPS65910=y
> +CONFIG_MFD_STM32_LPTIMER=y
> CONFIG_REGULATOR_ACT8945A=y
> CONFIG_REGULATOR_AB8500=y
> CONFIG_REGULATOR_ACT8865=y
> @@ -567,6 +568,7 @@ CONFIG_REGULATOR_QCOM_SMD_RPM=y
> CONFIG_REGULATOR_RN5T618=y
> CONFIG_REGULATOR_S2MPS11=y
> CONFIG_REGULATOR_S5M8767=y
> +CONFIG_REGULATOR_STM32_VREFBUF=y
> CONFIG_REGULATOR_TI_ABB=y
> CONFIG_REGULATOR_TPS51632=y
> CONFIG_REGULATOR_TPS62360=y
> @@ -935,13 +937,19 @@ CONFIG_AT91_SAMA5D2_ADC=m
> CONFIG_BERLIN2_ADC=m
> CONFIG_CPCAP_ADC=m
> CONFIG_EXYNOS_ADC=m
> +CONFIG_STM32_ADC_CORE=y
> +CONFIG_STM32_ADC=y
> +CONFIG_STM32_DFSDM_ADC=y
> CONFIG_VF610_ADC=m
> CONFIG_XILINX_XADC=y
> +CONFIG_STM32_LPTIMER_CNT=y
> +CONFIG_STM32_DAC=y
> CONFIG_MPU3050_I2C=y
> CONFIG_CM36651=m
> CONFIG_AK8975=y
> CONFIG_RASPBERRYPI_POWER=y
> CONFIG_IIO_HRTIMER_TRIGGER=y
> +CONFIG_IIO_STM32_LPTIMER_TRIGGER=y
> CONFIG_PWM=y
> CONFIG_PWM_ATMEL=m
> CONFIG_PWM_ATMEL_HLCDC_PWM=m
> @@ -951,6 +959,8 @@ CONFIG_PWM_RCAR=m
> CONFIG_PWM_RENESAS_TPU=y
> CONFIG_PWM_ROCKCHIP=m
> CONFIG_PWM_SAMSUNG=m
> +CONFIG_PWM_STM32=y
> +CONFIG_PWM_STM32_LP=y
> CONFIG_PWM_SUN4I=y
> CONFIG_PWM_TEGRA=y
> CONFIG_PWM_VT8500=y
>
On Thu, May 3, 2018 at 10:05 AM, Alexandre Torgue
<[email protected]> wrote:
> Hi Fabrice,
>
> On 05/02/2018 05:24 PM, Fabrice Gasnier wrote:
>>
>> This enables drivers for STM32 timer, low power timer and analog hardware
>> that can be used on STM32MP1 SoC:
>> - Timer & LP Timer MFD core, PWM, trigger & encoder drivers
>> - IIO ADC/DAC/DFSDM
>> - vrefbuf regu driver (voltage reference buffer).
>>
>> Signed-off-by: Fabrice Gasnier <[email protected]>
>> ---
>> arch/arm/configs/multi_v7_defconfig | 10 ++++++++++
>> 1 file changed, 10 insertions(+)
>>
>
> Applied on stm32-next.
>
> Arnd,
> Do you agree if I take multi_v7_defconfig related patches in my stm32 pull
> requests ?
Yes, just make sure that all drivers that can reasonably be loadable
modules are configured that way rather than as built-in, so a defconfig
build doesn't become too big.
Arnd
On 05/04/2018 12:12 AM, Arnd Bergmann wrote:
> On Thu, May 3, 2018 at 10:05 AM, Alexandre Torgue
> <[email protected]> wrote:
>> Hi Fabrice,
>>
>> On 05/02/2018 05:24 PM, Fabrice Gasnier wrote:
>>>
>>> This enables drivers for STM32 timer, low power timer and analog hardware
>>> that can be used on STM32MP1 SoC:
>>> - Timer & LP Timer MFD core, PWM, trigger & encoder drivers
>>> - IIO ADC/DAC/DFSDM
>>> - vrefbuf regu driver (voltage reference buffer).
>>>
>>> Signed-off-by: Fabrice Gasnier <[email protected]>
>>> ---
>>> arch/arm/configs/multi_v7_defconfig | 10 ++++++++++
>>> 1 file changed, 10 insertions(+)
>>>
>>
>> Applied on stm32-next.
>>
>> Arnd,
>> Do you agree if I take multi_v7_defconfig related patches in my stm32 pull
>> requests ?
>
> Yes, just make sure that all drivers that can reasonably be loadable
> modules are configured that way rather than as built-in, so a defconfig
> build doesn't become too big.
Ok. You're right, this drivers could be configured as module. We just
need to verify impact before send it.
Regards
alex
>
> Arnd
>