From: Sean Wang <[email protected]>
The patchset adds the MT7921 SDIO (MT7921s) Blutooth support to btmtksdio
driver, which basically are made up of 3 parts.
PART 1: patch 1-3 to create btmtk module to rely on
These are preliminary patches for MT7921s driver to move the common
firmware download procedure and the common functions from MT7921u to btmtk
module to make MT7921u, MT7921s and other devices can share with to reduce
the unnecessary duplicated code being created.
PART 2: patch 4-8 to refactor btmtksdio prior to adding MT7921s
These are preliminary patches for MT7921s driver to refactor the current
btmtksdio to make MT7921S is able to coexist with the devices the current
driver can support with the generic code and improve the performance on
packet transmitting and receving process.
PART 3: patch 9-10 to add specific MT7921s logic
Add the specific logic regarding to MT7921s bluetooth.
Mark-yw Chen (1):
Bluetooth: btmtksdio: transmit packet according to the status TX_EMPTY
Sean Wang (9):
Bluetooth: mediatek: add BT_MTK module
Bluetooth: btmtksido: rely on BT_MTK module
Bluetooth: btmtksdio: add .set_bdaddr support
Bluetooth: btmtksdio: explicitly set WHISR as write-1-clear
Bluetooth: btmtksdio: move interrupt service to work
Bluetooth: btmtksdio: update register CSDIOCSR operation
Bluetooth: btmtksdio: use register CRPLR to read packet length
mmc: add MT7921 SDIO identifiers for MediaTek Bluetooth devices
Bluetooth: btmtksdio: add MT7921s Bluetooth support
drivers/bluetooth/Kconfig | 6 +
drivers/bluetooth/Makefile | 1 +
drivers/bluetooth/btmtk.c | 288 ++++++++++++++++++++
drivers/bluetooth/btmtk.h | 101 +++++++
drivers/bluetooth/btmtksdio.c | 496 +++++++++++++++++-----------------
drivers/bluetooth/btusb.c | 331 +----------------------
include/linux/mmc/sdio_ids.h | 1 +
7 files changed, 647 insertions(+), 577 deletions(-)
create mode 100644 drivers/bluetooth/btmtk.c
create mode 100644 drivers/bluetooth/btmtk.h
--
2.25.1
From: Sean Wang <[email protected]>
The MT7961 SDIO identifier for MediaTek Bluetooth devices were being
referred in the MediaTek Bluetooth driver.
Co-developed-by: Mark-yw Chen <[email protected]>
Signed-off-by: Mark-yw Chen <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
---
include/linux/mmc/sdio_ids.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h
index a85c9f0bd470..53f0efa0bccf 100644
--- a/include/linux/mmc/sdio_ids.h
+++ b/include/linux/mmc/sdio_ids.h
@@ -105,6 +105,7 @@
#define SDIO_VENDOR_ID_MEDIATEK 0x037a
#define SDIO_DEVICE_ID_MEDIATEK_MT7663 0x7663
#define SDIO_DEVICE_ID_MEDIATEK_MT7668 0x7668
+#define SDIO_DEVICE_ID_MEDIATEK_MT7961 0x7961
#define SDIO_VENDOR_ID_MICROCHIP_WILC 0x0296
#define SDIO_DEVICE_ID_MICROCHIP_WILC1000 0x5347
--
2.25.1
From: Sean Wang <[email protected]>
Add BT_MTK module that is a preliminary patch to introduce mt7921s support
to share the logic betweem btusb and btmtksdio.
Signed-off-by: Sean Wang <[email protected]>
---
drivers/bluetooth/Kconfig | 5 +
drivers/bluetooth/Makefile | 1 +
drivers/bluetooth/btmtk.c | 288 ++++++++++++++++++++++++++++++++
drivers/bluetooth/btmtk.h | 97 +++++++++++
drivers/bluetooth/btusb.c | 331 +------------------------------------
5 files changed, 397 insertions(+), 325 deletions(-)
create mode 100644 drivers/bluetooth/btmtk.c
create mode 100644 drivers/bluetooth/btmtk.h
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 851842372c9b..24c3aea4a7d6 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -19,6 +19,10 @@ config BT_QCA
tristate
select FW_LOADER
+config BT_MTK
+ tristate
+ select FW_LOADER
+
config BT_HCIBTUSB
tristate "HCI USB driver"
depends on USB
@@ -55,6 +59,7 @@ config BT_HCIBTUSB_BCM
config BT_HCIBTUSB_MTK
bool "MediaTek protocol support"
depends on BT_HCIBTUSB
+ select BT_MTK
default n
help
The MediaTek protocol support enables firmware download
diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
index 16286ea2655d..3321a8aea4a0 100644
--- a/drivers/bluetooth/Makefile
+++ b/drivers/bluetooth/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_BT_QCOMSMD) += btqcomsmd.o
obj-$(CONFIG_BT_BCM) += btbcm.o
obj-$(CONFIG_BT_RTL) += btrtl.o
obj-$(CONFIG_BT_QCA) += btqca.o
+obj-$(CONFIG_BT_MTK) += btmtk.o
obj-$(CONFIG_BT_VIRTIO) += virtio_bt.o
diff --git a/drivers/bluetooth/btmtk.c b/drivers/bluetooth/btmtk.c
new file mode 100644
index 000000000000..7ab6cffe5bc1
--- /dev/null
+++ b/drivers/bluetooth/btmtk.c
@@ -0,0 +1,288 @@
+// SPDX-License-Identifier: ISC
+/* Copyright (C) 2021 MediaTek Inc.
+ *
+ */
+#include <linux/module.h>
+#include <linux/firmware.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btmtk.h"
+
+#define VERSION "0.1"
+
+/* It is for mt79xx download rom patch*/
+#define MTK_FW_ROM_PATCH_HEADER_SIZE 32
+#define MTK_FW_ROM_PATCH_GD_SIZE 64
+#define MTK_FW_ROM_PATCH_SEC_MAP_SIZE 64
+#define MTK_SEC_MAP_COMMON_SIZE 12
+#define MTK_SEC_MAP_NEED_SEND_SIZE 52
+
+struct btmtk_patch_header {
+ u8 datetime[16];
+ u8 platform[4];
+ __le16 hwver;
+ __le16 swver;
+ __le32 magicnum;
+} __packed;
+
+struct btmtk_global_desc {
+ __le32 patch_ver;
+ __le32 sub_sys;
+ __le32 feature_opt;
+ __le32 section_num;
+} __packed;
+
+struct btmtk_section_map {
+ __le32 sectype;
+ __le32 secoffset;
+ __le32 secsize;
+ union {
+ __le32 u4SecSpec[13];
+ struct {
+ __le32 dlAddr;
+ __le32 dlsize;
+ __le32 seckeyidx;
+ __le32 alignlen;
+ __le32 sectype;
+ __le32 dlmodecrctype;
+ __le32 crc;
+ __le32 reserved[6];
+ } bin_info_spec;
+ };
+} __packed;
+
+int btmtk_setup_firmware_79xx(struct hci_dev *hdev, const char *fwname,
+ wmt_cmd_sync_func_t wmt_cmd_sync)
+{
+ struct btmtk_hci_wmt_params wmt_params;
+ struct btmtk_global_desc *globaldesc = NULL;
+ struct btmtk_section_map *sectionmap;
+ const struct firmware *fw;
+ const u8 *fw_ptr;
+ const u8 *fw_bin_ptr;
+ int err, dlen, i, status;
+ u8 flag, first_block, retry;
+ u32 section_num, dl_size, section_offset;
+ u8 cmd[64];
+
+ err = request_firmware(&fw, fwname, &hdev->dev);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to load firmware file (%d)", err);
+ return err;
+ }
+
+ fw_ptr = fw->data;
+ fw_bin_ptr = fw_ptr;
+ globaldesc = (struct btmtk_global_desc *)(fw_ptr + MTK_FW_ROM_PATCH_HEADER_SIZE);
+ section_num = le32_to_cpu(globaldesc->section_num);
+
+ for (i = 0; i < section_num; i++) {
+ first_block = 1;
+ fw_ptr = fw_bin_ptr;
+ sectionmap = (struct btmtk_section_map *)(fw_ptr + MTK_FW_ROM_PATCH_HEADER_SIZE +
+ MTK_FW_ROM_PATCH_GD_SIZE + MTK_FW_ROM_PATCH_SEC_MAP_SIZE * i);
+
+ section_offset = le32_to_cpu(sectionmap->secoffset);
+ dl_size = le32_to_cpu(sectionmap->bin_info_spec.dlsize);
+
+ if (dl_size > 0) {
+ retry = 20;
+ while (retry > 0) {
+ cmd[0] = 0; /* 0 means legacy dl mode. */
+ memcpy(cmd + 1,
+ fw_ptr + MTK_FW_ROM_PATCH_HEADER_SIZE +
+ MTK_FW_ROM_PATCH_GD_SIZE + MTK_FW_ROM_PATCH_SEC_MAP_SIZE * i +
+ MTK_SEC_MAP_COMMON_SIZE,
+ MTK_SEC_MAP_NEED_SEND_SIZE + 1);
+
+ wmt_params.op = BTMTK_WMT_PATCH_DWNLD;
+ wmt_params.status = &status;
+ wmt_params.flag = 0;
+ wmt_params.dlen = MTK_SEC_MAP_NEED_SEND_SIZE + 1;
+ wmt_params.data = &cmd;
+
+ err = wmt_cmd_sync(hdev, &wmt_params);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to send wmt patch dwnld (%d)",
+ err);
+ goto err_release_fw;
+ }
+
+ if (status == BTMTK_WMT_PATCH_UNDONE) {
+ break;
+ } else if (status == BTMTK_WMT_PATCH_PROGRESS) {
+ msleep(100);
+ retry--;
+ } else if (status == BTMTK_WMT_PATCH_DONE) {
+ goto next_section;
+ } else {
+ bt_dev_err(hdev, "Failed wmt patch dwnld status (%d)",
+ status);
+ goto err_release_fw;
+ }
+ }
+
+ fw_ptr += section_offset;
+ wmt_params.op = BTMTK_WMT_PATCH_DWNLD;
+ wmt_params.status = NULL;
+
+ while (dl_size > 0) {
+ dlen = min_t(int, 250, dl_size);
+ if (first_block == 1) {
+ flag = 1;
+ first_block = 0;
+ } else if (dl_size - dlen <= 0) {
+ flag = 3;
+ } else {
+ flag = 2;
+ }
+
+ wmt_params.flag = flag;
+ wmt_params.dlen = dlen;
+ wmt_params.data = fw_ptr;
+
+ err = wmt_cmd_sync(hdev, &wmt_params);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to send wmt patch dwnld (%d)",
+ err);
+ goto err_release_fw;
+ }
+
+ dl_size -= dlen;
+ fw_ptr += dlen;
+ }
+ }
+next_section:
+ continue;
+ }
+ /* Wait a few moments for firmware activation done */
+ usleep_range(100000, 120000);
+
+err_release_fw:
+ release_firmware(fw);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(btmtk_setup_firmware_79xx);
+
+int btmtk_setup_firmware(struct hci_dev *hdev, const char *fwname,
+ wmt_cmd_sync_func_t wmt_cmd_sync)
+{
+ struct btmtk_hci_wmt_params wmt_params;
+ const struct firmware *fw;
+ const u8 *fw_ptr;
+ size_t fw_size;
+ int err, dlen;
+ u8 flag, param;
+
+ err = request_firmware(&fw, fwname, &hdev->dev);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to load firmware file (%d)", err);
+ return err;
+ }
+
+ /* Power on data RAM the firmware relies on. */
+ param = 1;
+ wmt_params.op = BTMTK_WMT_FUNC_CTRL;
+ wmt_params.flag = 3;
+ wmt_params.dlen = sizeof(param);
+ wmt_params.data = ¶m;
+ wmt_params.status = NULL;
+
+ err = wmt_cmd_sync(hdev, &wmt_params);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to power on data RAM (%d)", err);
+ goto err_release_fw;
+ }
+
+ fw_ptr = fw->data;
+ fw_size = fw->size;
+
+ /* The size of patch header is 30 bytes, should be skip */
+ if (fw_size < 30) {
+ err = -EINVAL;
+ goto err_release_fw;
+ }
+
+ fw_size -= 30;
+ fw_ptr += 30;
+ flag = 1;
+
+ wmt_params.op = BTMTK_WMT_PATCH_DWNLD;
+ wmt_params.status = NULL;
+
+ while (fw_size > 0) {
+ dlen = min_t(int, 250, fw_size);
+
+ /* Tell device the position in sequence */
+ if (fw_size - dlen <= 0)
+ flag = 3;
+ else if (fw_size < fw->size - 30)
+ flag = 2;
+
+ wmt_params.flag = flag;
+ wmt_params.dlen = dlen;
+ wmt_params.data = fw_ptr;
+
+ err = wmt_cmd_sync(hdev, &wmt_params);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to send wmt patch dwnld (%d)",
+ err);
+ goto err_release_fw;
+ }
+
+ fw_size -= dlen;
+ fw_ptr += dlen;
+ }
+
+ wmt_params.op = BTMTK_WMT_RST;
+ wmt_params.flag = 4;
+ wmt_params.dlen = 0;
+ wmt_params.data = NULL;
+ wmt_params.status = NULL;
+
+ /* Activate funciton the firmware providing to */
+ err = wmt_cmd_sync(hdev, &wmt_params);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to send wmt rst (%d)", err);
+ goto err_release_fw;
+ }
+
+ /* Wait a few moments for firmware activation done */
+ usleep_range(10000, 12000);
+
+err_release_fw:
+ release_firmware(fw);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(btmtk_setup_firmware);
+
+int btmtk_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+ struct sk_buff *skb;
+ long ret;
+
+ skb = __hci_cmd_sync(hdev, 0xfc1a, sizeof(bdaddr), bdaddr, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ ret = PTR_ERR(skb);
+ bt_dev_err(hdev, "changing Mediatek device address failed (%ld)",
+ ret);
+ return ret;
+ }
+ kfree_skb(skb);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btmtk_set_bdaddr);
+
+MODULE_AUTHOR("Sean Wang <[email protected]>");
+MODULE_AUTHOR("Mark Chen <[email protected]>");
+MODULE_DESCRIPTION("Bluetooth support for MediaTek devices ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE(FIRMWARE_MT7663);
+MODULE_FIRMWARE(FIRMWARE_MT7668);
+MODULE_FIRMWARE(FIRMWARE_MT7961);
diff --git a/drivers/bluetooth/btmtk.h b/drivers/bluetooth/btmtk.h
new file mode 100644
index 000000000000..87c25c6cf969
--- /dev/null
+++ b/drivers/bluetooth/btmtk.h
@@ -0,0 +1,97 @@
+/* SPDX-License-Identifier: ISC */
+/* Copyright (C) 2021 MediaTek Inc. */
+
+#define FIRMWARE_MT7663 "mediatek/mt7663pr2h.bin"
+#define FIRMWARE_MT7668 "mediatek/mt7668pr2h.bin"
+#define FIRMWARE_MT7961 "mediatek/BT_RAM_CODE_MT7961_1_2_hdr.bin"
+
+#define HCI_WMT_MAX_EVENT_SIZE 64
+
+enum {
+ BTMTK_WMT_PATCH_DWNLD = 0x1,
+ BTMTK_WMT_FUNC_CTRL = 0x6,
+ BTMTK_WMT_RST = 0x7,
+ BTMTK_WMT_SEMAPHORE = 0x17,
+};
+
+enum {
+ BTMTK_WMT_INVALID,
+ BTMTK_WMT_PATCH_UNDONE,
+ BTMTK_WMT_PATCH_PROGRESS,
+ BTMTK_WMT_PATCH_DONE,
+ BTMTK_WMT_ON_UNDONE,
+ BTMTK_WMT_ON_DONE,
+ BTMTK_WMT_ON_PROGRESS,
+};
+
+struct btmtk_wmt_hdr {
+ u8 dir;
+ u8 op;
+ __le16 dlen;
+ u8 flag;
+} __packed;
+
+struct btmtk_hci_wmt_cmd {
+ struct btmtk_wmt_hdr hdr;
+ u8 data[];
+} __packed;
+
+struct btmtk_hci_wmt_evt {
+ struct hci_event_hdr hhdr;
+ struct btmtk_wmt_hdr whdr;
+} __packed;
+
+struct btmtk_hci_wmt_evt_funcc {
+ struct btmtk_hci_wmt_evt hwhdr;
+ __be16 status;
+} __packed;
+
+struct btmtk_tci_sleep {
+ u8 mode;
+ __le16 duration;
+ __le16 host_duration;
+ u8 host_wakeup_pin;
+ u8 time_compensation;
+} __packed;
+
+struct btmtk_hci_wmt_params {
+ u8 op;
+ u8 flag;
+ u16 dlen;
+ const void *data;
+ u32 *status;
+};
+
+typedef int (*wmt_cmd_sync_func_t)(struct hci_dev *,
+ struct btmtk_hci_wmt_params *);
+
+#if IS_ENABLED(CONFIG_BT_MTK)
+
+int btmtk_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
+
+int btmtk_setup_firmware_79xx(struct hci_dev *hdev, const char *fwname,
+ wmt_cmd_sync_func_t wmt_cmd_sync);
+
+int btmtk_setup_firmware(struct hci_dev *hdev, const char *fwname,
+ wmt_cmd_sync_func_t wmt_cmd_sync);
+#else
+
+static inline int btmtk_set_bdaddr(struct hci_dev *hdev,
+ const bdaddr_t *bdaddr)
+{
+ return -EOPNOTSUPP;
+}
+
+static int btmtk_setup_firmware_79xx(struct hci_dev *hdev, const char *fwname,
+ wmt_cmd_sync_func_t wmt_cmd_sync)
+{
+ return -EOPNOTSUPP;
+}
+
+static int btmtk_setup_firmware(struct hci_dev *hdev, const char *fwname,
+ wmt_cmd_sync_func_t wmt_cmd_sync)
+{
+ return -EOPNOTSUPP;
+}
+
+#endif
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 75c83768c257..3414d971e4a8 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -24,6 +24,7 @@
#include "btintel.h"
#include "btbcm.h"
#include "btrtl.h"
+#include "btmtk.h"
#define VERSION "0.8"
@@ -2131,122 +2132,6 @@ static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb)
#define MTK_BT_RST_DONE 0x00000100
#define MTK_BT_RESET_WAIT_MS 100
#define MTK_BT_RESET_NUM_TRIES 10
-#define FIRMWARE_MT7663 "mediatek/mt7663pr2h.bin"
-#define FIRMWARE_MT7668 "mediatek/mt7668pr2h.bin"
-
-#define HCI_WMT_MAX_EVENT_SIZE 64
-/* It is for mt79xx download rom patch*/
-#define MTK_FW_ROM_PATCH_HEADER_SIZE 32
-#define MTK_FW_ROM_PATCH_GD_SIZE 64
-#define MTK_FW_ROM_PATCH_SEC_MAP_SIZE 64
-#define MTK_SEC_MAP_COMMON_SIZE 12
-#define MTK_SEC_MAP_NEED_SEND_SIZE 52
-
-enum {
- BTMTK_WMT_PATCH_DWNLD = 0x1,
- BTMTK_WMT_FUNC_CTRL = 0x6,
- BTMTK_WMT_RST = 0x7,
- BTMTK_WMT_SEMAPHORE = 0x17,
-};
-
-enum {
- BTMTK_WMT_INVALID,
- BTMTK_WMT_PATCH_UNDONE,
- BTMTK_WMT_PATCH_PROGRESS,
- BTMTK_WMT_PATCH_DONE,
- BTMTK_WMT_ON_UNDONE,
- BTMTK_WMT_ON_DONE,
- BTMTK_WMT_ON_PROGRESS,
-};
-
-struct btmtk_wmt_hdr {
- u8 dir;
- u8 op;
- __le16 dlen;
- u8 flag;
-} __packed;
-
-struct btmtk_hci_wmt_cmd {
- struct btmtk_wmt_hdr hdr;
- u8 data[];
-} __packed;
-
-struct btmtk_hci_wmt_evt {
- struct hci_event_hdr hhdr;
- struct btmtk_wmt_hdr whdr;
-} __packed;
-
-struct btmtk_hci_wmt_evt_funcc {
- struct btmtk_hci_wmt_evt hwhdr;
- __be16 status;
-} __packed;
-
-struct btmtk_tci_sleep {
- u8 mode;
- __le16 duration;
- __le16 host_duration;
- u8 host_wakeup_pin;
- u8 time_compensation;
-} __packed;
-
-struct btmtk_hci_wmt_params {
- u8 op;
- u8 flag;
- u16 dlen;
- const void *data;
- u32 *status;
-};
-
-struct btmtk_patch_header {
- u8 datetime[16];
- u8 platform[4];
- __le16 hwver;
- __le16 swver;
- __le32 magicnum;
-} __packed;
-
-struct btmtk_global_desc {
- __le32 patch_ver;
- __le32 sub_sys;
- __le32 feature_opt;
- __le32 section_num;
-} __packed;
-
-struct btmtk_section_map {
- __le32 sectype;
- __le32 secoffset;
- __le32 secsize;
- union {
- __le32 u4SecSpec[13];
- struct {
- __le32 dlAddr;
- __le32 dlsize;
- __le32 seckeyidx;
- __le32 alignlen;
- __le32 sectype;
- __le32 dlmodecrctype;
- __le32 crc;
- __le32 reserved[6];
- } bin_info_spec;
- };
-} __packed;
-
-static int btusb_set_bdaddr_mtk(struct hci_dev *hdev, const bdaddr_t *bdaddr)
-{
- struct sk_buff *skb;
- long ret;
-
- skb = __hci_cmd_sync(hdev, 0xfc1a, sizeof(bdaddr), bdaddr, HCI_INIT_TIMEOUT);
- if (IS_ERR(skb)) {
- ret = PTR_ERR(skb);
- bt_dev_err(hdev, "changing Mediatek device address failed (%ld)",
- ret);
- return ret;
- }
- kfree_skb(skb);
-
- return 0;
-}
static void btusb_mtk_wmt_recv(struct urb *urb)
{
@@ -2497,209 +2382,6 @@ static int btusb_mtk_hci_wmt_sync(struct hci_dev *hdev,
return err;
}
-static int btusb_mtk_setup_firmware_79xx(struct hci_dev *hdev, const char *fwname)
-{
- struct btmtk_hci_wmt_params wmt_params;
- struct btmtk_global_desc *globaldesc = NULL;
- struct btmtk_section_map *sectionmap;
- const struct firmware *fw;
- const u8 *fw_ptr;
- const u8 *fw_bin_ptr;
- int err, dlen, i, status;
- u8 flag, first_block, retry;
- u32 section_num, dl_size, section_offset;
- u8 cmd[64];
-
- err = request_firmware(&fw, fwname, &hdev->dev);
- if (err < 0) {
- bt_dev_err(hdev, "Failed to load firmware file (%d)", err);
- return err;
- }
-
- fw_ptr = fw->data;
- fw_bin_ptr = fw_ptr;
- globaldesc = (struct btmtk_global_desc *)(fw_ptr + MTK_FW_ROM_PATCH_HEADER_SIZE);
- section_num = le32_to_cpu(globaldesc->section_num);
-
- for (i = 0; i < section_num; i++) {
- first_block = 1;
- fw_ptr = fw_bin_ptr;
- sectionmap = (struct btmtk_section_map *)(fw_ptr + MTK_FW_ROM_PATCH_HEADER_SIZE +
- MTK_FW_ROM_PATCH_GD_SIZE + MTK_FW_ROM_PATCH_SEC_MAP_SIZE * i);
-
- section_offset = le32_to_cpu(sectionmap->secoffset);
- dl_size = le32_to_cpu(sectionmap->bin_info_spec.dlsize);
-
- if (dl_size > 0) {
- retry = 20;
- while (retry > 0) {
- cmd[0] = 0; /* 0 means legacy dl mode. */
- memcpy(cmd + 1,
- fw_ptr + MTK_FW_ROM_PATCH_HEADER_SIZE +
- MTK_FW_ROM_PATCH_GD_SIZE + MTK_FW_ROM_PATCH_SEC_MAP_SIZE * i +
- MTK_SEC_MAP_COMMON_SIZE,
- MTK_SEC_MAP_NEED_SEND_SIZE + 1);
-
- wmt_params.op = BTMTK_WMT_PATCH_DWNLD;
- wmt_params.status = &status;
- wmt_params.flag = 0;
- wmt_params.dlen = MTK_SEC_MAP_NEED_SEND_SIZE + 1;
- wmt_params.data = &cmd;
-
- err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
- if (err < 0) {
- bt_dev_err(hdev, "Failed to send wmt patch dwnld (%d)",
- err);
- goto err_release_fw;
- }
-
- if (status == BTMTK_WMT_PATCH_UNDONE) {
- break;
- } else if (status == BTMTK_WMT_PATCH_PROGRESS) {
- msleep(100);
- retry--;
- } else if (status == BTMTK_WMT_PATCH_DONE) {
- goto next_section;
- } else {
- bt_dev_err(hdev, "Failed wmt patch dwnld status (%d)",
- status);
- goto err_release_fw;
- }
- }
-
- fw_ptr += section_offset;
- wmt_params.op = BTMTK_WMT_PATCH_DWNLD;
- wmt_params.status = NULL;
-
- while (dl_size > 0) {
- dlen = min_t(int, 250, dl_size);
- if (first_block == 1) {
- flag = 1;
- first_block = 0;
- } else if (dl_size - dlen <= 0) {
- flag = 3;
- } else {
- flag = 2;
- }
-
- wmt_params.flag = flag;
- wmt_params.dlen = dlen;
- wmt_params.data = fw_ptr;
-
- err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
- if (err < 0) {
- bt_dev_err(hdev, "Failed to send wmt patch dwnld (%d)",
- err);
- goto err_release_fw;
- }
-
- dl_size -= dlen;
- fw_ptr += dlen;
- }
- }
-next_section:
- continue;
- }
- /* Wait a few moments for firmware activation done */
- usleep_range(100000, 120000);
-
-err_release_fw:
- release_firmware(fw);
-
- return err;
-}
-
-static int btusb_mtk_setup_firmware(struct hci_dev *hdev, const char *fwname)
-{
- struct btmtk_hci_wmt_params wmt_params;
- const struct firmware *fw;
- const u8 *fw_ptr;
- size_t fw_size;
- int err, dlen;
- u8 flag, param;
-
- err = request_firmware(&fw, fwname, &hdev->dev);
- if (err < 0) {
- bt_dev_err(hdev, "Failed to load firmware file (%d)", err);
- return err;
- }
-
- /* Power on data RAM the firmware relies on. */
- param = 1;
- wmt_params.op = BTMTK_WMT_FUNC_CTRL;
- wmt_params.flag = 3;
- wmt_params.dlen = sizeof(param);
- wmt_params.data = ¶m;
- wmt_params.status = NULL;
-
- err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
- if (err < 0) {
- bt_dev_err(hdev, "Failed to power on data RAM (%d)", err);
- goto err_release_fw;
- }
-
- fw_ptr = fw->data;
- fw_size = fw->size;
-
- /* The size of patch header is 30 bytes, should be skip */
- if (fw_size < 30) {
- err = -EINVAL;
- goto err_release_fw;
- }
-
- fw_size -= 30;
- fw_ptr += 30;
- flag = 1;
-
- wmt_params.op = BTMTK_WMT_PATCH_DWNLD;
- wmt_params.status = NULL;
-
- while (fw_size > 0) {
- dlen = min_t(int, 250, fw_size);
-
- /* Tell device the position in sequence */
- if (fw_size - dlen <= 0)
- flag = 3;
- else if (fw_size < fw->size - 30)
- flag = 2;
-
- wmt_params.flag = flag;
- wmt_params.dlen = dlen;
- wmt_params.data = fw_ptr;
-
- err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
- if (err < 0) {
- bt_dev_err(hdev, "Failed to send wmt patch dwnld (%d)",
- err);
- goto err_release_fw;
- }
-
- fw_size -= dlen;
- fw_ptr += dlen;
- }
-
- wmt_params.op = BTMTK_WMT_RST;
- wmt_params.flag = 4;
- wmt_params.dlen = 0;
- wmt_params.data = NULL;
- wmt_params.status = NULL;
-
- /* Activate funciton the firmware providing to */
- err = btusb_mtk_hci_wmt_sync(hdev, &wmt_params);
- if (err < 0) {
- bt_dev_err(hdev, "Failed to send wmt rst (%d)", err);
- goto err_release_fw;
- }
-
- /* Wait a few moments for firmware activation done */
- usleep_range(10000, 12000);
-
-err_release_fw:
- release_firmware(fw);
-
- return err;
-}
-
static int btusb_mtk_func_query(struct hci_dev *hdev)
{
struct btmtk_hci_wmt_params wmt_params;
@@ -2857,7 +2539,8 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
snprintf(fw_bin_name, sizeof(fw_bin_name),
"mediatek/BT_RAM_CODE_MT%04x_1_%x_hdr.bin",
dev_id & 0xffff, (fw_version & 0xff) + 1);
- err = btusb_mtk_setup_firmware_79xx(hdev, fw_bin_name);
+ err = btmtk_setup_firmware_79xx(hdev, fw_bin_name,
+ btusb_mtk_hci_wmt_sync);
/* It's Device EndPoint Reset Option Register */
btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, MTK_EP_RST_IN_OUT_OPT);
@@ -2903,7 +2586,8 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
}
/* Setup a firmware which the device definitely requires */
- err = btusb_mtk_setup_firmware(hdev, fwname);
+ err = btmtk_setup_firmware(hdev, fwname,
+ btusb_mtk_hci_wmt_sync);
if (err < 0)
return err;
@@ -3064,9 +2748,6 @@ static int btusb_recv_acl_mtk(struct hci_dev *hdev, struct sk_buff *skb)
return hci_recv_frame(hdev, skb);
}
-MODULE_FIRMWARE(FIRMWARE_MT7663);
-MODULE_FIRMWARE(FIRMWARE_MT7668);
-
#ifdef CONFIG_PM
/* Configure an out-of-band gpio as wake-up pin, if specified in device tree */
static int marvell_config_oob_wake(struct hci_dev *hdev)
@@ -3868,7 +3549,7 @@ static int btusb_probe(struct usb_interface *intf,
hdev->shutdown = btusb_mtk_shutdown;
hdev->manufacturer = 70;
hdev->cmd_timeout = btusb_mtk_cmd_timeout;
- hdev->set_bdaddr = btusb_set_bdaddr_mtk;
+ hdev->set_bdaddr = btmtk_set_bdaddr;
set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
data->recv_acl = btusb_recv_acl_mtk;
}
--
2.25.1
From: Sean Wang <[email protected]>
btmtksdio belongs to WIFI/BT combo chip that would serve two radios in one
sdio_irq so that we have to move interrupt service to worker to ensure ISR
as short as possible.
The worker would serve the both Tx and Rx in a batch to effectively reduce
many interrupts to the host and to avoid excessive sdio lock contention
between various context (even from WiFi driver) and help to be more
efficient to complete command/event transation.
Co-developed-by: Mark-yw Chen <[email protected]>
Signed-off-by: Mark-yw Chen <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
---
drivers/bluetooth/btmtksdio.c | 132 ++++++++++++++++------------------
1 file changed, 63 insertions(+), 69 deletions(-)
diff --git a/drivers/bluetooth/btmtksdio.c b/drivers/bluetooth/btmtksdio.c
index 57126a95e292..f712b52e5797 100644
--- a/drivers/bluetooth/btmtksdio.c
+++ b/drivers/bluetooth/btmtksdio.c
@@ -98,7 +98,7 @@ struct btmtksdio_dev {
struct sdio_func *func;
struct device *dev;
- struct work_struct tx_work;
+ struct work_struct txrx_work;
unsigned long tx_state;
struct sk_buff_head txq;
@@ -249,32 +249,6 @@ static u32 btmtksdio_drv_own_query(struct btmtksdio_dev *bdev)
return sdio_readl(bdev->func, MTK_REG_CHLPCR, NULL);
}
-static void btmtksdio_tx_work(struct work_struct *work)
-{
- struct btmtksdio_dev *bdev = container_of(work, struct btmtksdio_dev,
- tx_work);
- struct sk_buff *skb;
- int err;
-
- pm_runtime_get_sync(bdev->dev);
-
- sdio_claim_host(bdev->func);
-
- while ((skb = skb_dequeue(&bdev->txq))) {
- err = btmtksdio_tx_packet(bdev, skb);
- if (err < 0) {
- bdev->hdev->stat.err_tx++;
- skb_queue_head(&bdev->txq, skb);
- break;
- }
- }
-
- sdio_release_host(bdev->func);
-
- pm_runtime_mark_last_busy(bdev->dev);
- pm_runtime_put_autosuspend(bdev->dev);
-}
-
static int btmtksdio_recv_event(struct hci_dev *hdev, struct sk_buff *skb)
{
struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
@@ -425,63 +399,81 @@ static int btmtksdio_rx_packet(struct btmtksdio_dev *bdev, u16 rx_size)
return err;
}
-static void btmtksdio_interrupt(struct sdio_func *func)
+static void btmtksdio_txrx_work(struct work_struct *work)
{
- struct btmtksdio_dev *bdev = sdio_get_drvdata(func);
+ struct btmtksdio_dev *bdev = container_of(work, struct btmtksdio_dev,
+ txrx_work);
+ unsigned long txrx_timeout;
+ struct sk_buff *skb;
u32 int_status;
u16 rx_size;
-
- /* It is required that the host gets ownership from the device before
- * accessing any register, however, if SDIO host is not being released,
- * a potential deadlock probably happens in a circular wait between SDIO
- * IRQ work and PM runtime work. So, we have to explicitly release SDIO
- * host here and claim again after the PM runtime work is all done.
- */
- sdio_release_host(bdev->func);
+ int err;
pm_runtime_get_sync(bdev->dev);
sdio_claim_host(bdev->func);
/* Disable interrupt */
- sdio_writel(func, C_INT_EN_CLR, MTK_REG_CHLPCR, NULL);
+ sdio_writel(bdev->func, C_INT_EN_CLR, MTK_REG_CHLPCR, 0);
- int_status = sdio_readl(func, MTK_REG_CHISR, NULL);
+ while ((skb = skb_dequeue(&bdev->txq))) {
+ err = btmtksdio_tx_packet(bdev, skb);
+ if (err < 0) {
+ bdev->hdev->stat.err_tx++;
+ skb_queue_head(&bdev->txq, skb);
+ break;
+ }
+ }
- /* Ack an interrupt as soon as possible before any operation on
- * hardware.
- *
- * Note that we don't ack any status during operations to avoid race
- * condition between the host and the device such as it's possible to
- * mistakenly ack RX_DONE for the next packet and then cause interrupts
- * not be raised again but there is still pending data in the hardware
- * FIFO.
- */
- sdio_writel(func, int_status, MTK_REG_CHISR, NULL);
+ txrx_timeout = jiffies + 5 * HZ;
+
+ do {
+ int_status = sdio_readl(bdev->func, MTK_REG_CHISR, NULL);
+
+ /* Ack an interrupt as soon as possible before any operation on
+ * hardware.
+ *
+ * Note that we don't ack any status during operations to avoid race
+ * condition between the host and the device such as it's possible to
+ * mistakenly ack RX_DONE for the next packet and then cause interrupts
+ * not be raised again but there is still pending data in the hardware
+ * FIFO.
+ */
+ sdio_writel(bdev->func, int_status, MTK_REG_CHISR, NULL);
+
+ if (int_status & FW_OWN_BACK_INT)
+ bt_dev_dbg(bdev->hdev, "Get fw own back");
+
+ if (int_status & TX_EMPTY)
+ schedule_work(&bdev->txrx_work);
+ else if (unlikely(int_status & TX_FIFO_OVERFLOW))
+ bt_dev_warn(bdev->hdev, "Tx fifo overflow");
+
+ if (int_status & RX_DONE_INT) {
+ rx_size = (int_status & RX_PKT_LEN) >> 16;
+ if (btmtksdio_rx_packet(bdev, rx_size) < 0)
+ bdev->hdev->stat.err_rx++;
+ }
- if (unlikely(!int_status))
- bt_dev_err(bdev->hdev, "CHISR is 0");
+ } while (int_status || time_is_before_jiffies(txrx_timeout));
- if (int_status & FW_OWN_BACK_INT)
- bt_dev_dbg(bdev->hdev, "Get fw own back");
+ /* Enable interrupt */
+ sdio_writel(bdev->func, C_INT_EN_SET, MTK_REG_CHLPCR, 0);
- if (int_status & TX_EMPTY)
- schedule_work(&bdev->tx_work);
- else if (unlikely(int_status & TX_FIFO_OVERFLOW))
- bt_dev_warn(bdev->hdev, "Tx fifo overflow");
+ sdio_release_host(bdev->func);
- if (int_status & RX_DONE_INT) {
- rx_size = (int_status & RX_PKT_LEN) >> 16;
+ pm_runtime_mark_last_busy(bdev->dev);
+ pm_runtime_put_autosuspend(bdev->dev);
+}
- if (btmtksdio_rx_packet(bdev, rx_size) < 0)
- bdev->hdev->stat.err_rx++;
- }
+static void btmtksdio_interrupt(struct sdio_func *func)
+{
+ struct btmtksdio_dev *bdev = sdio_get_drvdata(func);
- /* Enable interrupt */
- sdio_writel(func, C_INT_EN_SET, MTK_REG_CHLPCR, NULL);
+ /* Disable interrupt */
+ sdio_writel(bdev->func, C_INT_EN_CLR, MTK_REG_CHLPCR, 0);
- pm_runtime_mark_last_busy(bdev->dev);
- pm_runtime_put_autosuspend(bdev->dev);
+ schedule_work(&bdev->txrx_work);
}
static int btmtksdio_open(struct hci_dev *hdev)
@@ -583,6 +575,8 @@ static int btmtksdio_close(struct hci_dev *hdev)
sdio_release_irq(bdev->func);
+ cancel_work_sync(&bdev->txrx_work);
+
/* Return ownership to the device */
sdio_writel(bdev->func, C_FW_OWN_REQ_SET, MTK_REG_CHLPCR, NULL);
@@ -604,7 +598,7 @@ static int btmtksdio_flush(struct hci_dev *hdev)
skb_queue_purge(&bdev->txq);
- cancel_work_sync(&bdev->tx_work);
+ cancel_work_sync(&bdev->txrx_work);
return 0;
}
@@ -795,7 +789,7 @@ static int btmtksdio_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
skb_queue_tail(&bdev->txq, skb);
- schedule_work(&bdev->tx_work);
+ schedule_work(&bdev->txrx_work);
return 0;
}
@@ -818,7 +812,7 @@ static int btmtksdio_probe(struct sdio_func *func,
bdev->dev = &func->dev;
bdev->func = func;
- INIT_WORK(&bdev->tx_work, btmtksdio_tx_work);
+ INIT_WORK(&bdev->txrx_work, btmtksdio_txrx_work);
skb_queue_head_init(&bdev->txq);
/* Initialize and register HCI device */
--
2.25.1