Some of MediaTek's Filogic SoCs come with built-in gigabit Ethernet
PHYs which require calibration data from the SoC's efuse.
Despite the similar design the driver doesn't share any code with the
existing mediatek-ge.c, so add support for these PHYs by introducing a
new driver for only MediaTek's ARM64 SoCs.
As the PHYs integrated in the MT7988 SoC require reading the polarity
of the LEDs from the SoCs's boottrap also add dt-binding for that.
All LEDs are for now setup with default values, a follow up patch which
allows custom LED setups will be sent after the PHY LED framework is
more in shape.
Changes since v3:
* fix spelling and reverse xmas tree
* add dt-binding for mediatek,boottrap
Changes since v2:
* remove everything related to PHY LEDs for now, LED support will
be cleaned up and submitted once PHY LED framework is more ready
Changes since v1:
* split-off SoC-specific driver from mediatek-ge.c as requested
* address comments made by Heiner Kallweit
* add pinctrl handling for PHY LED
* remove calibration details not needed in production hardware
Daniel Golle (2):
dt-bindings: arm: mediatek: add mediatek,boottrap binding
net: phy: add driver for MediaTek SoC built-in GE PHYs
.../arm/mediatek/mediatek,boottrap.yaml | 37 +
MAINTAINERS | 9 +
drivers/net/phy/Kconfig | 12 +
drivers/net/phy/Makefile | 1 +
drivers/net/phy/mediatek-ge-soc.c | 1264 +++++++++++++++++
drivers/net/phy/mediatek-ge.c | 3 +-
6 files changed, 1325 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,boottrap.yaml
create mode 100644 drivers/net/phy/mediatek-ge-soc.c
base-commit: 285b2a46953cecea207c53f7c6a7a76c9bbab303
--
2.40.0