1. of_find_device_by_node() takes reference, we should use put_device()
to release it when not need anymore.
2. of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not needed anymore.
Add put_device() and of_node_put() in some error paths to fix.
Fixes: ec9bfa1e1a79 ("dmaengine: ti-dma-crossbar: dra7: Use bitops instead of idr")
Fixes: a074ae38f859 ("dmaengine: Add driver for TI DMA crossbar on DRA7x")
Signed-off-by: Miaoqian Lin <[email protected]>
---
drivers/dma/ti/dma-crossbar.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/dma/ti/dma-crossbar.c b/drivers/dma/ti/dma-crossbar.c
index 71d24fc07c00..f744ddbbbad7 100644
--- a/drivers/dma/ti/dma-crossbar.c
+++ b/drivers/dma/ti/dma-crossbar.c
@@ -245,6 +245,7 @@ static void *ti_dra7_xbar_route_allocate(struct of_phandle_args *dma_spec,
if (dma_spec->args[0] >= xbar->xbar_requests) {
dev_err(&pdev->dev, "Invalid XBAR request number: %d\n",
dma_spec->args[0]);
+ put_device(&pdev->dev);
return ERR_PTR(-EINVAL);
}
@@ -252,12 +253,14 @@ static void *ti_dra7_xbar_route_allocate(struct of_phandle_args *dma_spec,
dma_spec->np = of_parse_phandle(ofdma->of_node, "dma-masters", 0);
if (!dma_spec->np) {
dev_err(&pdev->dev, "Can't get DMA master\n");
+ put_device(&pdev->dev);
return ERR_PTR(-EINVAL);
}
map = kzalloc(sizeof(*map), GFP_KERNEL);
if (!map) {
of_node_put(dma_spec->np);
+ put_device(&pdev->dev);
return ERR_PTR(-ENOMEM);
}
@@ -268,6 +271,8 @@ static void *ti_dra7_xbar_route_allocate(struct of_phandle_args *dma_spec,
mutex_unlock(&xbar->mutex);
dev_err(&pdev->dev, "Run out of free DMA requests\n");
kfree(map);
+ of_node_put(dma_spec->np);
+ put_device(&pdev->dev);
return ERR_PTR(-ENOMEM);
}
set_bit(map->xbar_out, xbar->dma_inuse);
--
2.25.1
On 5/11/2022 10:18 PM, Miaoqian Lin wrote:
> 1. of_find_device_by_node() takes reference, we should use put_device()
> to release it when not need anymore.
> 2. of_parse_phandle() returns a node pointer with refcount
> incremented, we should use of_node_put() on it when not needed anymore.
>
> Add put_device() and of_node_put() in some error paths to fix.
Sounds like you need 2 patches for this? One just for the put_device()
and the other for the of_node_put()?
>
> Fixes: ec9bfa1e1a79 ("dmaengine: ti-dma-crossbar: dra7: Use bitops instead of idr")
> Fixes: a074ae38f859 ("dmaengine: Add driver for TI DMA crossbar on DRA7x")
> Signed-off-by: Miaoqian Lin <[email protected]>
> ---
> drivers/dma/ti/dma-crossbar.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/dma/ti/dma-crossbar.c b/drivers/dma/ti/dma-crossbar.c
> index 71d24fc07c00..f744ddbbbad7 100644
> --- a/drivers/dma/ti/dma-crossbar.c
> +++ b/drivers/dma/ti/dma-crossbar.c
> @@ -245,6 +245,7 @@ static void *ti_dra7_xbar_route_allocate(struct of_phandle_args *dma_spec,
> if (dma_spec->args[0] >= xbar->xbar_requests) {
> dev_err(&pdev->dev, "Invalid XBAR request number: %d\n",
> dma_spec->args[0]);
> + put_device(&pdev->dev);
> return ERR_PTR(-EINVAL);
> }
>
> @@ -252,12 +253,14 @@ static void *ti_dra7_xbar_route_allocate(struct of_phandle_args *dma_spec,
> dma_spec->np = of_parse_phandle(ofdma->of_node, "dma-masters", 0);
> if (!dma_spec->np) {
> dev_err(&pdev->dev, "Can't get DMA master\n");
> + put_device(&pdev->dev);
> return ERR_PTR(-EINVAL);
> }
>
> map = kzalloc(sizeof(*map), GFP_KERNEL);
> if (!map) {
> of_node_put(dma_spec->np);
> + put_device(&pdev->dev);
> return ERR_PTR(-ENOMEM);
> }
>
> @@ -268,6 +271,8 @@ static void *ti_dra7_xbar_route_allocate(struct of_phandle_args *dma_spec,
> mutex_unlock(&xbar->mutex);
> dev_err(&pdev->dev, "Run out of free DMA requests\n");
> kfree(map);
> + of_node_put(dma_spec->np);
> + put_device(&pdev->dev);
> return ERR_PTR(-ENOMEM);
> }
> set_bit(map->xbar_out, xbar->dma_inuse);
Hi, Dave
On 2022/5/13 1:03, Dave Jiang wrote:
>
> On 5/11/2022 10:18 PM, Miaoqian Lin wrote:
>> 1. of_find_device_by_node() takes reference, we should use put_device()
>> to release it when not need anymore.
>> 2. of_parse_phandle() returns a node pointer with refcount
>> incremented, we should use of_node_put() on it when not needed anymore.
>>
>> Add put_device() and of_node_put() in some error paths to fix.
> Sounds like you need 2 patches for this? One just for the put_device() and the other for the of_node_put()?
Thanks for your response, I will split it into 2 patches.
>>
>> Fixes: ec9bfa1e1a79 ("dmaengine: ti-dma-crossbar: dra7: Use bitops instead of idr")
>> Fixes: a074ae38f859 ("dmaengine: Add driver for TI DMA crossbar on DRA7x")
>> Signed-off-by: Miaoqian Lin <[email protected]>
>> ---
>> drivers/dma/ti/dma-crossbar.c | 5 +++++
>> 1 file changed, 5 insertions(+)
>>
>> diff --git a/drivers/dma/ti/dma-crossbar.c b/drivers/dma/ti/dma-crossbar.c
>> index 71d24fc07c00..f744ddbbbad7 100644
>> --- a/drivers/dma/ti/dma-crossbar.c
>> +++ b/drivers/dma/ti/dma-crossbar.c
>> @@ -245,6 +245,7 @@ static void *ti_dra7_xbar_route_allocate(struct of_phandle_args *dma_spec,
>> if (dma_spec->args[0] >= xbar->xbar_requests) {
>> dev_err(&pdev->dev, "Invalid XBAR request number: %d\n",
>> dma_spec->args[0]);
>> + put_device(&pdev->dev);
>> return ERR_PTR(-EINVAL);
>> }
>> @@ -252,12 +253,14 @@ static void *ti_dra7_xbar_route_allocate(struct of_phandle_args *dma_spec,
>> dma_spec->np = of_parse_phandle(ofdma->of_node, "dma-masters", 0);
>> if (!dma_spec->np) {
>> dev_err(&pdev->dev, "Can't get DMA master\n");
>> + put_device(&pdev->dev);
>> return ERR_PTR(-EINVAL);
>> }
>> map = kzalloc(sizeof(*map), GFP_KERNEL);
>> if (!map) {
>> of_node_put(dma_spec->np);
>> + put_device(&pdev->dev);
>> return ERR_PTR(-ENOMEM);
>> }
>> @@ -268,6 +271,8 @@ static void *ti_dra7_xbar_route_allocate(struct of_phandle_args *dma_spec,
>> mutex_unlock(&xbar->mutex);
>> dev_err(&pdev->dev, "Run out of free DMA requests\n");
>> kfree(map);
>> + of_node_put(dma_spec->np);
>> + put_device(&pdev->dev);
>> return ERR_PTR(-ENOMEM);
>> }
>> set_bit(map->xbar_out, xbar->dma_inuse);