Enable Cadence QSPI present on 66AK2G SoC and Keystone USB PHY driver
for K2E.
Signed-off-by: Vignesh R <[email protected]>
---
arch/arm/configs/multi_v7_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 992a8a5da065..c4f4f6682ea5 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -185,6 +185,7 @@ CONFIG_MTD_NAND_BRCMNAND=y
CONFIG_MTD_NAND_VF610_NFC=y
CONFIG_MTD_NAND_DAVINCI=y
CONFIG_MTD_SPI_NOR=y
+CONFIG_SPI_CADENCE_QUADSPI=m
CONFIG_SPI_FSL_QUADSPI=m
CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_LOOP=y
@@ -675,6 +676,7 @@ CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_ISP1760=y
CONFIG_USB_HSIC_USB3503=y
CONFIG_AB8500_USB=y
+CONFIG_KEYSTONE_USB_PHY=m
CONFIG_NOP_USB_XCEIV=m
CONFIG_USB_GPIO_VBUS=y
CONFIG_USB_ISP1301=y
--
2.15.1
On 12/5/2017 1:19 AM, Vignesh R wrote:
> Enable Cadence QSPI present on 66AK2G SoC and Keystone USB PHY driver
> for K2E.
>
> Signed-off-by: Vignesh R <[email protected]>
> ---
> arch/arm/configs/multi_v7_defconfig | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
> index 992a8a5da065..c4f4f6682ea5 100644
> --- a/arch/arm/configs/multi_v7_defconfig
> +++ b/arch/arm/configs/multi_v7_defconfig
> @@ -185,6 +185,7 @@ CONFIG_MTD_NAND_BRCMNAND=y
> CONFIG_MTD_NAND_VF610_NFC=y
> CONFIG_MTD_NAND_DAVINCI=y
> CONFIG_MTD_SPI_NOR=y
> +CONFIG_SPI_CADENCE_QUADSPI=m
> CONFIG_SPI_FSL_QUADSPI=m
> CONFIG_MTD_UBI=y
> CONFIG_BLK_DEV_LOOP=y
> @@ -675,6 +676,7 @@ CONFIG_USB_CHIPIDEA_HOST=y
> CONFIG_USB_ISP1760=y
> CONFIG_USB_HSIC_USB3503=y
> CONFIG_AB8500_USB=y
> +CONFIG_KEYSTONE_USB_PHY=m
> CONFIG_NOP_USB_XCEIV=m
> CONFIG_USB_GPIO_VBUS=y
> CONFIG_USB_ISP1301=y
>
There are more peripherals/drivers which are enabled
in keystone config.
PWM_TIECAP, CAN_C_CAN, RESET_TI_SYSCON, TI_SCI_PROTOCOL,
TI_MESSAGE_MANAGER, NOP_USB_XCEIV, GPIO_PCA953X etc etc
Could please check the complete config and update the
patch please ?
On 05-Dec-17 10:19 PM, Santosh Shilimkar wrote:
> On 12/5/2017 1:19 AM, Vignesh R wrote:
>> Enable Cadence QSPI present on 66AK2G SoC and Keystone USB PHY driver
>> for K2E.
>>
>> Signed-off-by: Vignesh R <[email protected]>
>> ---
>> arch/arm/configs/multi_v7_defconfig | 2 ++
>> 1 file changed, 2 insertions(+)
>>
>> diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
>> index 992a8a5da065..c4f4f6682ea5 100644
>> --- a/arch/arm/configs/multi_v7_defconfig
>> +++ b/arch/arm/configs/multi_v7_defconfig
>> @@ -185,6 +185,7 @@ CONFIG_MTD_NAND_BRCMNAND=y
>> CONFIG_MTD_NAND_VF610_NFC=y
>> CONFIG_MTD_NAND_DAVINCI=y
>> CONFIG_MTD_SPI_NOR=y
>> +CONFIG_SPI_CADENCE_QUADSPI=m
>> CONFIG_SPI_FSL_QUADSPI=m
>> CONFIG_MTD_UBI=y
>> CONFIG_BLK_DEV_LOOP=y
>> @@ -675,6 +676,7 @@ CONFIG_USB_CHIPIDEA_HOST=y
>> CONFIG_USB_ISP1760=y
>> CONFIG_USB_HSIC_USB3503=y
>> CONFIG_AB8500_USB=y
>> +CONFIG_KEYSTONE_USB_PHY=m
>> CONFIG_NOP_USB_XCEIV=m
>> CONFIG_USB_GPIO_VBUS=y
>> CONFIG_USB_ISP1301=y
>>
> There are more peripherals/drivers which are enabled
> in keystone config.
>
> PWM_TIECAP, CAN_C_CAN, RESET_TI_SYSCON, TI_SCI_PROTOCOL,
> TI_MESSAGE_MANAGER, NOP_USB_XCEIV, GPIO_PCA953X etc etc
>
> Could please check the complete config and update the
> patch please ?
>
On linux-next(on which this patch is based on) I see commit:
commit f15187dcdbcd8e649948a525153a356b35993655
Author: Santosh Shilimkar <[email protected]>
Date: Sat Dec 2 19:53:29 2017 -0800
ARM: config: sync multi-v7 config with keystone peripherals
Signed-off-by: Santosh Shilimkar <[email protected]>
This commit enables all drivers for K2 platforms including the ones you
mentioned. I added the two missing ones in this patch.
There are some configs related to net which I am not sure whether to
enable or not and how it affects other platforms. But AFAICS, there are
no drivers left to be enabled.
On 12/5/17 9:10 AM, Vignesh R wrote:
>
>
> On 05-Dec-17 10:19 PM, Santosh Shilimkar wrote:
>> On 12/5/2017 1:19 AM, Vignesh R wrote:
>>> Enable Cadence QSPI present on 66AK2G SoC and Keystone USB PHY driver
>>> for K2E.
>>>
>>> Signed-off-by: Vignesh R <[email protected]>
>>> ---
>>> arch/arm/configs/multi_v7_defconfig | 2 ++
>>> 1 file changed, 2 insertions(+)
>>>
>>> diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
>>> index 992a8a5da065..c4f4f6682ea5 100644
>>> --- a/arch/arm/configs/multi_v7_defconfig
>>> +++ b/arch/arm/configs/multi_v7_defconfig
>>> @@ -185,6 +185,7 @@ CONFIG_MTD_NAND_BRCMNAND=y
>>> CONFIG_MTD_NAND_VF610_NFC=y
>>> CONFIG_MTD_NAND_DAVINCI=y
>>> CONFIG_MTD_SPI_NOR=y
>>> +CONFIG_SPI_CADENCE_QUADSPI=m
>>> CONFIG_SPI_FSL_QUADSPI=m
>>> CONFIG_MTD_UBI=y
>>> CONFIG_BLK_DEV_LOOP=y
>>> @@ -675,6 +676,7 @@ CONFIG_USB_CHIPIDEA_HOST=y
>>> CONFIG_USB_ISP1760=y
>>> CONFIG_USB_HSIC_USB3503=y
>>> CONFIG_AB8500_USB=y
>>> +CONFIG_KEYSTONE_USB_PHY=m
>>> CONFIG_NOP_USB_XCEIV=m
>>> CONFIG_USB_GPIO_VBUS=y
>>> CONFIG_USB_ISP1301=y
>>>
>> There are more peripherals/drivers which are enabled
>> in keystone config.
>>
>> PWM_TIECAP, CAN_C_CAN, RESET_TI_SYSCON, TI_SCI_PROTOCOL,
>> TI_MESSAGE_MANAGER, NOP_USB_XCEIV, GPIO_PCA953X etc etc
>>
>> Could please check the complete config and update the
>> patch please ?
>>
>
> On linux-next(on which this patch is based on) I see commit:
> commit f15187dcdbcd8e649948a525153a356b35993655
> Author: Santosh Shilimkar <[email protected]>
> Date: Sat Dec 2 19:53:29 2017 -0800
>
> ARM: config: sync multi-v7 config with keystone peripherals
>
> Signed-off-by: Santosh Shilimkar <[email protected]>
>
>
> This commit enables all drivers for K2 platforms including the ones you
> mentioned. I added the two missing ones in this patch.
> There are some configs related to net which I am not sure whether to
> enable or not and how it affects other platforms. But AFAICS, there are
> no drivers left to be enabled.
>
I didn't realized pf pushing that change out. It was not complete but
since you already verified it, I will add your patch on to of it.
Thanks for checking Vignesh !!
Regards,
Santosh