From: Sean Wang <[email protected]>
That is a preliminary patch to introduce mt7921s support.
Explicitly set WHISR as write-1-clear method to all devices that is
the expected behavior the driver rely on.
Co-developed-by: Mark-yw Chen <[email protected]>
Signed-off-by: Mark-yw Chen <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
---
drivers/bluetooth/btmtksdio.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/bluetooth/btmtksdio.c b/drivers/bluetooth/btmtksdio.c
index 77d1c4ac582d..57126a95e292 100644
--- a/drivers/bluetooth/btmtksdio.c
+++ b/drivers/bluetooth/btmtksdio.c
@@ -487,8 +487,8 @@ static void btmtksdio_interrupt(struct sdio_func *func)
static int btmtksdio_open(struct hci_dev *hdev)
{
struct btmtksdio_dev *bdev = hci_get_drvdata(hdev);
+ u32 status, val;
int err;
- u32 status;
sdio_claim_host(bdev->func);
@@ -533,8 +533,13 @@ static int btmtksdio_open(struct hci_dev *hdev)
if (err < 0)
goto err_release_irq;
- /* Setup write-1-clear for CHISR register */
- sdio_writel(bdev->func, C_INT_CLR_CTRL, MTK_REG_CHCR, &err);
+ /* Explitly set write-1-clear method */
+ val = sdio_readl(bdev->func, MTK_REG_CHCR, &err);
+ if (err < 0)
+ goto err_release_irq;
+
+ val |= C_INT_CLR_CTRL;
+ sdio_writel(bdev->func, val, MTK_REG_CHCR, &err);
if (err < 0)
goto err_release_irq;
--
2.25.1