Implement udc->pullup callback, so that udc_connect/disconnect work.
This is needed for composite gadget, as it assumes udc_disconnect()
actually works and calls gadget's ->disconnect callback.
Signed-off-by: Michał Mirosław <[email protected]>
---
drivers/usb/gadget/udc/atmel_usba_udc.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index 9342a3d24963..c5128c229c52 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -1028,6 +1028,7 @@ usba_udc_set_selfpowered(struct usb_gadget *gadget, int is_selfpowered)
return 0;
}
+static int atmel_usba_pullup(struct usb_gadget *gadget, int is_on);
static int atmel_usba_start(struct usb_gadget *gadget,
struct usb_gadget_driver *driver);
static int atmel_usba_stop(struct usb_gadget *gadget);
@@ -1101,6 +1102,7 @@ static const struct usb_gadget_ops usba_udc_ops = {
.get_frame = usba_udc_get_frame,
.wakeup = usba_udc_wakeup,
.set_selfpowered = usba_udc_set_selfpowered,
+ .pullup = atmel_usba_pullup,
.udc_start = atmel_usba_start,
.udc_stop = atmel_usba_stop,
.match_ep = atmel_usba_match_ep,
@@ -1957,6 +1959,24 @@ static irqreturn_t usba_vbus_irq_thread(int irq, void *devid)
return IRQ_HANDLED;
}
+static int atmel_usba_pullup(struct usb_gadget *gadget, int is_on)
+{
+ struct usba_udc *udc = container_of(gadget, struct usba_udc, gadget);
+ unsigned long flags;
+ u32 ctrl;
+
+ spin_lock_irqsave(&udc->lock, flags);
+ ctrl = usba_readl(udc, CTRL);
+ if (is_on)
+ ctrl &= ~USBA_DETACH;
+ else
+ ctrl |= USBA_DETACH;
+ usba_writel(udc, CTRL, ctrl);
+ spin_unlock_irqrestore(&udc->lock, flags);
+
+ return 0;
+}
+
static int atmel_usba_start(struct usb_gadget *gadget,
struct usb_gadget_driver *driver)
{
--
2.20.1