This patch series adds Intel ComboPhy driver, respective yaml schemas
Changes on v8:
As per PHY Maintainer's request add description in comments for doing
register access through register map framework.
Changes on v7:
As per System control driver maintainer's inputs remove
fwnode_to_regmap() definition and use device_node_get_regmap()
Changes on v6:
Rebase patches on the latest maintainer's branch
https://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git/?h=phy-for-5.7
Dilip Kota (3):
dt-bindings: phy: Add PHY_TYPE_XPCS definition
dt-bindings: phy: Add YAML schemas for Intel ComboPhy
phy: intel: Add driver support for ComboPhy
.../devicetree/bindings/phy/intel,combo-phy.yaml | 101 ++++
drivers/phy/intel/Kconfig | 14 +
drivers/phy/intel/Makefile | 1 +
drivers/phy/intel/phy-intel-combo.c | 632 +++++++++++++++++++++
include/dt-bindings/phy/phy.h | 1 +
5 files changed, 749 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
create mode 100644 drivers/phy/intel/phy-intel-combo.c
--
2.11.0
ComboPhy subsystem provides PHY support to various
controllers, viz. PCIe, SATA and EMAC.
Adding YAML schemas for the same.
Signed-off-by: Dilip Kota <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
Changes on v8:
No Change.
Changes on v7:
No Change.
Changes on v6:
Add Reviewed-by: Rob Herring <[email protected]>
.../devicetree/bindings/phy/intel,combo-phy.yaml | 101 +++++++++++++++++++++
1 file changed, 101 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
diff --git a/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
new file mode 100644
index 000000000000..347d0cdfb80d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/intel,combo-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel ComboPhy Subsystem
+
+maintainers:
+ - Dilip Kota <[email protected]>
+
+description: |
+ Intel Combophy subsystem supports PHYs for PCIe, EMAC and SATA
+ controllers. A single Combophy provides two PHY instances.
+
+properties:
+ $nodename:
+ pattern: "combophy(@.*|-[0-9a-f])*$"
+
+ compatible:
+ items:
+ - const: intel,combophy-lgm
+ - const: intel,combo-phy
+
+ clocks:
+ maxItems: 1
+
+ reg:
+ items:
+ - description: ComboPhy core registers
+ - description: PCIe app core control registers
+
+ reg-names:
+ items:
+ - const: core
+ - const: app
+
+ resets:
+ maxItems: 4
+
+ reset-names:
+ items:
+ - const: phy
+ - const: core
+ - const: iphy0
+ - const: iphy1
+
+ intel,syscfg:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: Chip configuration registers handle and ComboPhy instance id
+
+ intel,hsio:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: HSIO registers handle and ComboPhy instance id on NOC
+
+ intel,aggregation:
+ type: boolean
+ description: |
+ Specify the flag to configure ComboPHY in dual lane mode.
+
+ intel,phy-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Mode of the two phys in ComboPhy.
+ See dt-bindings/phy/phy.h for values.
+
+ "#phy-cells":
+ const: 1
+
+required:
+ - compatible
+ - clocks
+ - reg
+ - reg-names
+ - intel,syscfg
+ - intel,hsio
+ - intel,phy-mode
+ - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/phy/phy.h>
+ combophy@d0a00000 {
+ compatible = "intel,combophy-lgm", "intel,combo-phy";
+ clocks = <&cgu0 1>;
+ #phy-cells = <1>;
+ reg = <0xd0a00000 0x40000>,
+ <0xd0a40000 0x1000>;
+ reg-names = "core", "app";
+ resets = <&rcu0 0x50 6>,
+ <&rcu0 0x50 17>,
+ <&rcu0 0x50 23>,
+ <&rcu0 0x50 24>;
+ reset-names = "phy", "core", "iphy0", "iphy1";
+ intel,syscfg = <&sysconf 0>;
+ intel,hsio = <&hsiol 0>;
+ intel,phy-mode = <PHY_TYPE_PCIE>;
+ intel,aggregation;
+ };
--
2.11.0
Add definition for Ethernet PCS phy type.
Signed-off-by: Dilip Kota <[email protected]>
Acked-by: Rob Herring <[email protected]>
---
Changes on v8:
No Change
Changes on v7:
No Change
Changes on v6:
Add Acked-by: Rob Herring <[email protected]>
include/dt-bindings/phy/phy.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/dt-bindings/phy/phy.h b/include/dt-bindings/phy/phy.h
index 1f3f866fae7b..3727ef72138b 100644
--- a/include/dt-bindings/phy/phy.h
+++ b/include/dt-bindings/phy/phy.h
@@ -17,5 +17,6 @@
#define PHY_TYPE_USB3 4
#define PHY_TYPE_UFS 5
#define PHY_TYPE_DP 6
+#define PHY_TYPE_XPCS 7
#endif /* _DT_BINDINGS_PHY */
--
2.11.0
ComboPhy subsystem provides PHYs for various
controllers like PCIe, SATA and EMAC.
Signed-off-by: Dilip Kota <[email protected]>
---
Changes on v8:
As per PHY Maintainer's request add description for doing register access
through regmap in comments.
Changes on v7:
Use device_node_to_regmap instead of fwnode_to_regmap
Changes on v6:
No changes
Changes on v5:
Add changes as per inputs from Andy and Rob:
DT node uses phy-mode values as defined in "include/dt-bindings/phy/phy.h",
add changes to handle it.
ComboPhy no longer has children nodes, and children node properties(reset)
moved to parent node, so do the code changes accordingly.
Add _xlate() function to pass the appropriate phy handle.
Fix couple of nitpicks.
Changes on v4:
Address review comments
Remove dependency on OF config
Update copyright to 2019-2020
Define register macro PAD_DIS_CFG instead of const variable inside function.
Improve the error prints, and error returns.
Call put_device(dev), for get_dev_from_fwnode()
Move platform_set_drvdata() at the end of the probe().
Correct alignment in phy_ops intel_cbphy_ops.
Correct commented lines with proper vocabulary and punctuation.
Add/remove commas for the required constant arrays and enums.
Remove in driver:
linux/kernel.h, not required
macros: PCIE_PHY_MPLLA_CTRL, PCIE_PHY_MPLLB_CTRL
temp variable u32 prop;
Change function names:
intel_cbphy_iphy_dt_parse() -> intel_cbphy_iphy_fwnode_parse()
intel_cbphy_dt_sanity_check() -> intel_cbphy_sanity_check()
intel_cbphy_dt_parse() -> intel_cbphy_fwnode_parse()
Changes on v3:
Remove intel_iphy_names
Remove struct phy in struct intel_cbphy_iphy
Imporve if conditions logic
Use fwnode_to_regmap()
Call devm_of_platform_populate() to populate child nodes
Fix reset sequence during phy_init
Add SoC specific compatible "intel,combophy-lgm"
Add description for enums
Remove default case in switch {} intel_cbphy_set_mode() as it
never happens.
Use mutex_lock to synchronise combophy initialization across
two phys.
Change init_cnt to u32 datatype as it is within mutex lock.
Correct error handling of
fwnode_property_read_u32_array(fwnode, "intel,phy-mode", ...)
drivers/phy/intel/Kconfig | 14 +
drivers/phy/intel/Makefile | 1 +
drivers/phy/intel/phy-intel-combo.c | 632 ++++++++++++++++++++++++++++++++++++
3 files changed, 647 insertions(+)
create mode 100644 drivers/phy/intel/phy-intel-combo.c
diff --git a/drivers/phy/intel/Kconfig b/drivers/phy/intel/Kconfig
index 4ea6a8897cd7..3b40eb7b4fb4 100644
--- a/drivers/phy/intel/Kconfig
+++ b/drivers/phy/intel/Kconfig
@@ -2,6 +2,20 @@
#
# Phy drivers for Intel Lightning Mountain(LGM) platform
#
+config PHY_INTEL_COMBO
+ bool "Intel ComboPHY driver"
+ depends on X86 || COMPILE_TEST
+ depends on OF && HAS_IOMEM
+ select MFD_SYSCON
+ select GENERIC_PHY
+ select REGMAP
+ help
+ Enable this to support Intel ComboPhy.
+
+ This driver configures ComboPhy subsystem on Intel gateway
+ chipsets which provides PHYs for various controllers, EMAC,
+ SATA and PCIe.
+
config PHY_INTEL_EMMC
tristate "Intel EMMC PHY driver"
select GENERIC_PHY
diff --git a/drivers/phy/intel/Makefile b/drivers/phy/intel/Makefile
index 6b876a75599d..233d530dadde 100644
--- a/drivers/phy/intel/Makefile
+++ b/drivers/phy/intel/Makefile
@@ -1,2 +1,3 @@
# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_PHY_INTEL_COMBO) += phy-intel-combo.o
obj-$(CONFIG_PHY_INTEL_EMMC) += phy-intel-emmc.o
diff --git a/drivers/phy/intel/phy-intel-combo.c b/drivers/phy/intel/phy-intel-combo.c
new file mode 100644
index 000000000000..4bc1276ecf23
--- /dev/null
+++ b/drivers/phy/intel/phy-intel-combo.c
@@ -0,0 +1,632 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel Combo-PHY driver
+ *
+ * Copyright (C) 2019-2020 Intel Corporation.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/iopoll.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#include <dt-bindings/phy/phy.h>
+
+#define PCIE_PHY_GEN_CTRL 0x00
+#define PCIE_PHY_CLK_PAD BIT(17)
+
+#define PAD_DIS_CFG 0x174
+
+#define PCS_XF_ATE_OVRD_IN_2 0x3008
+#define ADAPT_REQ_MSK GENMASK(5, 4)
+
+#define PCS_XF_RX_ADAPT_ACK 0x3010
+#define RX_ADAPT_ACK_BIT BIT(0)
+
+#define CR_ADDR(addr, lane) (((addr) + (lane) * 0x100) << 2)
+#define REG_COMBO_MODE(x) ((x) * 0x200)
+#define REG_CLK_DISABLE(x) ((x) * 0x200 + 0x124)
+
+#define COMBO_PHY_ID(x) ((x)->parent->id)
+#define PHY_ID(x) ((x)->id)
+
+#define CLK_100MHZ 100000000
+#define CLK_156_25MHZ 156250000
+
+static const unsigned long intel_iphy_clk_rates[] = {
+ CLK_100MHZ, CLK_156_25MHZ, CLK_100MHZ,
+};
+
+enum {
+ PHY_0,
+ PHY_1,
+ PHY_MAX_NUM
+};
+
+/*
+ * Clock Register bit fields to enable clocks
+ * for ComboPhy according to the mode.
+ */
+enum intel_phy_mode {
+ PHY_PCIE_MODE = 0,
+ PHY_XPCS_MODE,
+ PHY_SATA_MODE,
+};
+
+/* ComboPhy mode Register values */
+enum intel_combo_mode {
+ PCIE0_PCIE1_MODE = 0,
+ PCIE_DL_MODE,
+ RXAUI_MODE,
+ XPCS0_XPCS1_MODE,
+ SATA0_SATA1_MODE,
+};
+
+enum aggregated_mode {
+ PHY_SL_MODE,
+ PHY_DL_MODE,
+};
+
+struct intel_combo_phy;
+
+struct intel_cbphy_iphy {
+ struct phy *phy;
+ struct intel_combo_phy *parent;
+ struct reset_control *app_rst;
+ u32 id;
+};
+
+struct intel_combo_phy {
+ struct device *dev;
+ struct clk *core_clk;
+ unsigned long clk_rate;
+ void __iomem *app_base;
+ void __iomem *cr_base;
+ struct regmap *syscfg;
+ struct regmap *hsiocfg;
+ u32 id;
+ u32 bid;
+ struct reset_control *phy_rst;
+ struct reset_control *core_rst;
+ struct intel_cbphy_iphy iphy[PHY_MAX_NUM];
+ enum intel_phy_mode phy_mode;
+ enum aggregated_mode aggr_mode;
+ u32 init_cnt;
+ struct mutex lock;
+};
+
+static int intel_cbphy_iphy_enable(struct intel_cbphy_iphy *iphy, bool set)
+{
+ struct intel_combo_phy *cbphy = iphy->parent;
+ u32 mask = BIT(cbphy->phy_mode * 2 + iphy->id);
+ u32 val;
+
+ /* Register: 0 is enable, 1 is disable */
+ val = set ? 0 : mask;
+
+ return regmap_update_bits(cbphy->hsiocfg, REG_CLK_DISABLE(cbphy->bid),
+ mask, val);
+}
+
+static int intel_cbphy_pcie_refclk_cfg(struct intel_cbphy_iphy *iphy, bool set)
+{
+ struct intel_combo_phy *cbphy = iphy->parent;
+ u32 mask = BIT(cbphy->id * 2 + iphy->id);
+ u32 val;
+
+ /* Register: 0 is enable, 1 is disable */
+ val = set ? 0 : mask;
+
+ return regmap_update_bits(cbphy->syscfg, PAD_DIS_CFG, mask, val);
+}
+
+static inline void combo_phy_w32_off_mask(void __iomem *base, unsigned int reg,
+ u32 mask, u32 val)
+{
+ u32 reg_val;
+
+ reg_val = readl(base + reg);
+ reg_val &= ~mask;
+ reg_val |= FIELD_PREP(mask, val);
+ writel(reg_val, base + reg);
+}
+
+static int intel_cbphy_iphy_cfg(struct intel_cbphy_iphy *iphy,
+ int (*phy_cfg)(struct intel_cbphy_iphy *))
+{
+ struct intel_combo_phy *cbphy = iphy->parent;
+ int ret;
+
+ ret = phy_cfg(iphy);
+ if (ret)
+ return ret;
+
+ if (cbphy->aggr_mode != PHY_DL_MODE)
+ return 0;
+
+ return phy_cfg(&cbphy->iphy[PHY_1]);
+}
+
+static int intel_cbphy_pcie_en_pad_refclk(struct intel_cbphy_iphy *iphy)
+{
+ struct intel_combo_phy *cbphy = iphy->parent;
+ int ret;
+
+ ret = intel_cbphy_pcie_refclk_cfg(iphy, true);
+ if (ret) {
+ dev_err(cbphy->dev, "Failed to enable PCIe pad refclk\n");
+ return ret;
+ }
+
+ if (cbphy->init_cnt)
+ return 0;
+
+ combo_phy_w32_off_mask(cbphy->app_base, PCIE_PHY_GEN_CTRL,
+ PCIE_PHY_CLK_PAD, 0);
+
+ /* Delay for stable clock PLL */
+ usleep_range(50, 100);
+
+ return 0;
+}
+
+static int intel_cbphy_pcie_dis_pad_refclk(struct intel_cbphy_iphy *iphy)
+{
+ struct intel_combo_phy *cbphy = iphy->parent;
+ int ret;
+
+ ret = intel_cbphy_pcie_refclk_cfg(iphy, false);
+ if (ret) {
+ dev_err(cbphy->dev, "Failed to disable PCIe pad refclk\n");
+ return ret;
+ }
+
+ if (cbphy->init_cnt)
+ return 0;
+
+ combo_phy_w32_off_mask(cbphy->app_base, PCIE_PHY_GEN_CTRL,
+ PCIE_PHY_CLK_PAD, 1);
+
+ return 0;
+}
+
+static int intel_cbphy_set_mode(struct intel_combo_phy *cbphy)
+{
+ enum aggregated_mode aggr = cbphy->aggr_mode;
+ struct device *dev = cbphy->dev;
+ enum intel_combo_mode cb_mode;
+ enum intel_phy_mode mode;
+ int ret;
+
+ mode = cbphy->phy_mode;
+
+ switch (mode) {
+ case PHY_PCIE_MODE:
+ cb_mode = (aggr == PHY_DL_MODE) ? PCIE_DL_MODE : PCIE0_PCIE1_MODE;
+ break;
+
+ case PHY_XPCS_MODE:
+ cb_mode = (aggr == PHY_DL_MODE) ? RXAUI_MODE : XPCS0_XPCS1_MODE;
+ break;
+
+ case PHY_SATA_MODE:
+ if (aggr == PHY_DL_MODE) {
+ dev_err(dev, "Mode:%u not support dual lane!\n", mode);
+ return -EINVAL;
+ }
+
+ cb_mode = SATA0_SATA1_MODE;
+ break;
+ }
+
+ ret = regmap_write(cbphy->hsiocfg, REG_COMBO_MODE(cbphy->bid), cb_mode);
+ if (ret)
+ dev_err(dev, "Failed to set ComboPhy mode: %d\n", ret);
+
+ return ret;
+}
+
+static void intel_cbphy_rst_assert(struct intel_combo_phy *cbphy)
+{
+ reset_control_assert(cbphy->core_rst);
+ reset_control_assert(cbphy->phy_rst);
+}
+
+static void intel_cbphy_rst_deassert(struct intel_combo_phy *cbphy)
+{
+ reset_control_deassert(cbphy->core_rst);
+ reset_control_deassert(cbphy->phy_rst);
+ /* Delay to ensure reset process is done */
+ usleep_range(10, 20);
+}
+
+static int intel_cbphy_iphy_power_on(struct intel_cbphy_iphy *iphy)
+{
+ struct intel_combo_phy *cbphy = iphy->parent;
+ int ret;
+
+ if (!cbphy->init_cnt) {
+ ret = clk_prepare_enable(cbphy->core_clk);
+ if (ret) {
+ dev_err(cbphy->dev, "Clock enable failed!\n");
+ return ret;
+ }
+
+ ret = clk_set_rate(cbphy->core_clk, cbphy->clk_rate);
+ if (ret) {
+ dev_err(cbphy->dev, "Clock freq set to %lu failed!\n",
+ cbphy->clk_rate);
+ goto clk_err;
+ }
+
+ intel_cbphy_rst_assert(cbphy);
+ intel_cbphy_rst_deassert(cbphy);
+ ret = intel_cbphy_set_mode(cbphy);
+ if (ret)
+ goto clk_err;
+ }
+
+ ret = intel_cbphy_iphy_enable(iphy, true);
+ if (ret) {
+ dev_err(cbphy->dev, "Failed enabling PHY core\n");
+ goto clk_err;
+ }
+
+ ret = reset_control_deassert(iphy->app_rst);
+ if (ret) {
+ dev_err(cbphy->dev, "PHY(%u:%u) reset deassert failed!\n",
+ COMBO_PHY_ID(iphy), PHY_ID(iphy));
+ goto clk_err;
+ }
+
+ /* Delay to ensure reset process is done */
+ udelay(1);
+
+ return 0;
+
+clk_err:
+ clk_disable_unprepare(cbphy->core_clk);
+
+ return ret;
+}
+
+static int intel_cbphy_iphy_power_off(struct intel_cbphy_iphy *iphy)
+{
+ struct intel_combo_phy *cbphy = iphy->parent;
+ int ret;
+
+ ret = reset_control_assert(iphy->app_rst);
+ if (ret) {
+ dev_err(cbphy->dev, "PHY(%u:%u) reset assert failed!\n",
+ COMBO_PHY_ID(iphy), PHY_ID(iphy));
+ return ret;
+ }
+
+ ret = intel_cbphy_iphy_enable(iphy, false);
+ if (ret) {
+ dev_err(cbphy->dev, "Failed disabling PHY core\n");
+ return ret;
+ }
+
+ if (cbphy->init_cnt)
+ return 0;
+
+ clk_disable_unprepare(cbphy->core_clk);
+ intel_cbphy_rst_assert(cbphy);
+
+ return 0;
+}
+
+static int intel_cbphy_init(struct phy *phy)
+{
+ struct intel_cbphy_iphy *iphy = phy_get_drvdata(phy);
+ struct intel_combo_phy *cbphy = iphy->parent;
+ int ret;
+
+ mutex_lock(&cbphy->lock);
+ ret = intel_cbphy_iphy_cfg(iphy, intel_cbphy_iphy_power_on);
+ if (ret)
+ goto err;
+
+ if (cbphy->phy_mode == PHY_PCIE_MODE) {
+ ret = intel_cbphy_iphy_cfg(iphy, intel_cbphy_pcie_en_pad_refclk);
+ if (ret)
+ goto err;
+ }
+
+ cbphy->init_cnt++;
+
+err:
+ mutex_unlock(&cbphy->lock);
+
+ return ret;
+}
+
+static int intel_cbphy_exit(struct phy *phy)
+{
+ struct intel_cbphy_iphy *iphy = phy_get_drvdata(phy);
+ struct intel_combo_phy *cbphy = iphy->parent;
+ int ret;
+
+ mutex_lock(&cbphy->lock);
+ cbphy->init_cnt--;
+ if (cbphy->phy_mode == PHY_PCIE_MODE) {
+ ret = intel_cbphy_iphy_cfg(iphy, intel_cbphy_pcie_dis_pad_refclk);
+ if (ret)
+ goto err;
+ }
+
+ ret = intel_cbphy_iphy_cfg(iphy, intel_cbphy_iphy_power_off);
+
+err:
+ mutex_unlock(&cbphy->lock);
+
+ return ret;
+}
+
+static int intel_cbphy_calibrate(struct phy *phy)
+{
+ struct intel_cbphy_iphy *iphy = phy_get_drvdata(phy);
+ struct intel_combo_phy *cbphy = iphy->parent;
+ void __iomem *cr_base = cbphy->cr_base;
+ int val, ret, id;
+
+ if (cbphy->phy_mode != PHY_XPCS_MODE)
+ return 0;
+
+ id = PHY_ID(iphy);
+
+ /* trigger auto RX adaptation */
+ combo_phy_w32_off_mask(cr_base, CR_ADDR(PCS_XF_ATE_OVRD_IN_2, id),
+ ADAPT_REQ_MSK, 3);
+ /* Wait RX adaptation to finish */
+ ret = readl_poll_timeout(cr_base + CR_ADDR(PCS_XF_RX_ADAPT_ACK, id),
+ val, val & RX_ADAPT_ACK_BIT, 10, 5000);
+ if (ret)
+ dev_err(cbphy->dev, "RX Adaptation failed!\n");
+ else
+ dev_dbg(cbphy->dev, "RX Adaptation success!\n");
+
+ /* Stop RX adaptation */
+ combo_phy_w32_off_mask(cr_base, CR_ADDR(PCS_XF_ATE_OVRD_IN_2, id),
+ ADAPT_REQ_MSK, 0);
+
+ return ret;
+}
+
+static int intel_cbphy_fwnode_parse(struct intel_combo_phy *cbphy)
+{
+ struct device *dev = cbphy->dev;
+ struct platform_device *pdev = to_platform_device(dev);
+ struct fwnode_handle *fwnode = dev_fwnode(dev);
+ struct fwnode_reference_args ref;
+ int ret;
+ u32 val;
+
+ cbphy->core_clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(cbphy->core_clk)) {
+ ret = PTR_ERR(cbphy->core_clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "Get clk failed:%d!\n", ret);
+ return ret;
+ }
+
+ cbphy->core_rst = devm_reset_control_get_optional(dev, "core");
+ if (IS_ERR(cbphy->core_rst)) {
+ ret = PTR_ERR(cbphy->core_rst);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "Get core reset control err: %d!\n", ret);
+ return ret;
+ }
+
+ cbphy->phy_rst = devm_reset_control_get_optional(dev, "phy");
+ if (IS_ERR(cbphy->phy_rst)) {
+ ret = PTR_ERR(cbphy->phy_rst);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "Get PHY reset control err: %d!\n", ret);
+ return ret;
+ }
+
+ cbphy->iphy[0].app_rst = devm_reset_control_get_optional(dev, "iphy0");
+ if (IS_ERR(cbphy->iphy[0].app_rst)) {
+ ret = PTR_ERR(cbphy->iphy[0].app_rst);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "Get phy0 reset control err: %d!\n", ret);
+ return ret;
+ }
+
+ cbphy->iphy[1].app_rst = devm_reset_control_get_optional(dev, "iphy1");
+ if (IS_ERR(cbphy->iphy[1].app_rst)) {
+ ret = PTR_ERR(cbphy->iphy[1].app_rst);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "Get phy1 reset control err: %d!\n", ret);
+ return ret;
+ }
+
+ cbphy->app_base = devm_platform_ioremap_resource_byname(pdev, "app");
+ if (IS_ERR(cbphy->app_base))
+ return PTR_ERR(cbphy->app_base);
+
+ cbphy->cr_base = devm_platform_ioremap_resource_byname(pdev, "core");
+ if (IS_ERR(cbphy->cr_base))
+ return PTR_ERR(cbphy->cr_base);
+
+ /*
+ * syscfg and hsiocfg variables stores the handle of the registers set
+ * in which ComboPhy subsytem specific registers are subset. Using
+ * Register map framework to access the registers set.
+ */
+ ret = fwnode_property_get_reference_args(fwnode, "intel,syscfg", NULL,
+ 1, 0, &ref);
+ if (ret < 0)
+ return ret;
+
+ cbphy->id = ref.args[0];
+ cbphy->syscfg = device_node_to_regmap(to_of_node(ref.fwnode));
+ fwnode_handle_put(ref.fwnode);
+
+ ret = fwnode_property_get_reference_args(fwnode, "intel,hsio", NULL, 1,
+ 0, &ref);
+ if (ret < 0)
+ return ret;
+
+ cbphy->bid = ref.args[0];
+ cbphy->hsiocfg = device_node_to_regmap(to_of_node(ref.fwnode));
+ fwnode_handle_put(ref.fwnode);
+
+ ret = fwnode_property_read_u32_array(fwnode, "intel,phy-mode", &val, 1);
+ if (ret)
+ return ret;
+
+ switch (val) {
+ case PHY_TYPE_PCIE:
+ cbphy->phy_mode = PHY_PCIE_MODE;
+ break;
+
+ case PHY_TYPE_SATA:
+ cbphy->phy_mode = PHY_SATA_MODE;
+ break;
+
+ case PHY_TYPE_XPCS:
+ cbphy->phy_mode = PHY_XPCS_MODE;
+ break;
+
+ default:
+ dev_err(dev, "Invalid PHY mode: %u\n", val);
+ return -EINVAL;
+ }
+
+ cbphy->clk_rate = intel_iphy_clk_rates[cbphy->phy_mode];
+
+ if (fwnode_property_present(fwnode, "intel,aggregation"))
+ cbphy->aggr_mode = PHY_DL_MODE;
+ else
+ cbphy->aggr_mode = PHY_SL_MODE;
+
+ return 0;
+}
+
+static const struct phy_ops intel_cbphy_ops = {
+ .init = intel_cbphy_init,
+ .exit = intel_cbphy_exit,
+ .calibrate = intel_cbphy_calibrate,
+ .owner = THIS_MODULE,
+};
+
+static struct phy *intel_cbphy_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct intel_combo_phy *cbphy = dev_get_drvdata(dev);
+ u32 iphy_id;
+
+ if (args->args_count < 1) {
+ dev_err(dev, "Invalid number of arguments\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ iphy_id = args->args[0];
+ if (iphy_id >= PHY_MAX_NUM) {
+ dev_err(dev, "Invalid phy instance %d\n", iphy_id);
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (cbphy->aggr_mode == PHY_DL_MODE && iphy_id == PHY_1) {
+ dev_err(dev, "Invalid. ComboPhy is in Dual lane mode %d\n", iphy_id);
+ return ERR_PTR(-EINVAL);
+ }
+
+ return cbphy->iphy[iphy_id].phy;
+}
+
+static int intel_cbphy_create(struct intel_combo_phy *cbphy)
+{
+ struct phy_provider *phy_provider;
+ struct device *dev = cbphy->dev;
+ struct intel_cbphy_iphy *iphy;
+ int i;
+
+ for (i = 0; i < PHY_MAX_NUM; i++) {
+ iphy = &cbphy->iphy[i];
+ iphy->parent = cbphy;
+ iphy->id = i;
+
+ /* In dual lane mode skip phy creation for the second phy */
+ if (cbphy->aggr_mode == PHY_DL_MODE && iphy->id == PHY_1)
+ continue;
+
+ iphy->phy = devm_phy_create(dev, NULL, &intel_cbphy_ops);
+ if (IS_ERR(iphy->phy)) {
+ dev_err(dev, "PHY[%u:%u]: create PHY instance failed!\n",
+ COMBO_PHY_ID(iphy), PHY_ID(iphy));
+
+ return PTR_ERR(iphy->phy);
+ }
+
+ phy_set_drvdata(iphy->phy, iphy);
+ }
+
+ dev_set_drvdata(dev, cbphy);
+ phy_provider = devm_of_phy_provider_register(dev, intel_cbphy_xlate);
+ if (IS_ERR(phy_provider))
+ dev_err(dev, "Register PHY provider failed!\n");
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static int intel_cbphy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct intel_combo_phy *cbphy;
+ int ret;
+
+ cbphy = devm_kzalloc(dev, sizeof(*cbphy), GFP_KERNEL);
+ if (!cbphy)
+ return -ENOMEM;
+
+ cbphy->dev = dev;
+ cbphy->init_cnt = 0;
+ mutex_init(&cbphy->lock);
+ ret = intel_cbphy_fwnode_parse(cbphy);
+ if (ret)
+ return ret;
+
+ platform_set_drvdata(pdev, cbphy);
+
+ return intel_cbphy_create(cbphy);
+}
+
+static int intel_cbphy_remove(struct platform_device *pdev)
+{
+ struct intel_combo_phy *cbphy = platform_get_drvdata(pdev);
+
+ intel_cbphy_rst_assert(cbphy);
+ clk_disable_unprepare(cbphy->core_clk);
+ return 0;
+}
+
+static const struct of_device_id of_intel_cbphy_match[] = {
+ { .compatible = "intel,combo-phy" },
+ { .compatible = "intel,combophy-lgm" },
+ {}
+};
+
+static struct platform_driver intel_cbphy_driver = {
+ .probe = intel_cbphy_probe,
+ .remove = intel_cbphy_remove,
+ .driver = {
+ .name = "intel-combo-phy",
+ .of_match_table = of_intel_cbphy_match,
+ }
+};
+
+module_platform_driver(intel_cbphy_driver);
+
+MODULE_DESCRIPTION("Intel Combo-phy driver");
+MODULE_LICENSE("GPL v2");
--
2.11.0
On 15-05-20, 16:13, Dilip Kota wrote:
> This patch series adds Intel ComboPhy driver, respective yaml schemas
>
> Changes on v8:
> As per PHY Maintainer's request add description in comments for doing
> register access through register map framework.
>
> Changes on v7:
> As per System control driver maintainer's inputs remove
> fwnode_to_regmap() definition and use device_node_get_regmap()
>
> Changes on v6:
> Rebase patches on the latest maintainer's branch
> https://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git/?h=phy-for-5.7
Acked-By: Vinod Koul <[email protected]>
--
~Vinod
Dilip,
On 5/15/2020 1:43 PM, Dilip Kota wrote:
> This patch series adds Intel ComboPhy driver, respective yaml schemas
>
> Changes on v8:
> As per PHY Maintainer's request add description in comments for doing
> register access through register map framework.
>
> Changes on v7:
> As per System control driver maintainer's inputs remove
> fwnode_to_regmap() definition and use device_node_get_regmap()
Can you fix this warning and resend the patch?
drivers/phy/intel/phy-intel-combo.c:229:6: warning: ‘cb_mode’ may be used
uninitialized in this function [-Wmaybe-uninitialized]
ret = regmap_write(cbphy->hsiocfg, REG_COMBO_MODE(cbphy->bid), cb_mode);
~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/phy/intel/phy-intel-combo.c:204:24: note: ‘cb_mode’ was declared here
enum intel_combo_mode cb_mode;
^~~~~~~
Thanks
Kishon
>
> Changes on v6:
> Rebase patches on the latest maintainer's branch
> https://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git/?h=phy-for-5.7
> Dilip Kota (3):
> dt-bindings: phy: Add PHY_TYPE_XPCS definition
> dt-bindings: phy: Add YAML schemas for Intel ComboPhy
> phy: intel: Add driver support for ComboPhy
>
> .../devicetree/bindings/phy/intel,combo-phy.yaml | 101 ++++
> drivers/phy/intel/Kconfig | 14 +
> drivers/phy/intel/Makefile | 1 +
> drivers/phy/intel/phy-intel-combo.c | 632 +++++++++++++++++++++
> include/dt-bindings/phy/phy.h | 1 +
> 5 files changed, 749 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
> create mode 100644 drivers/phy/intel/phy-intel-combo.c
>
On 5/18/2020 9:49 PM, Kishon Vijay Abraham I wrote:
> Dilip,
>
> On 5/15/2020 1:43 PM, Dilip Kota wrote:
>> This patch series adds Intel ComboPhy driver, respective yaml schemas
>>
>> Changes on v8:
>> As per PHY Maintainer's request add description in comments for doing
>> register access through register map framework.
>>
>> Changes on v7:
>> As per System control driver maintainer's inputs remove
>> fwnode_to_regmap() definition and use device_node_get_regmap()
> Can you fix this warning and resend the patch?
> drivers/phy/intel/phy-intel-combo.c:229:6: warning: ‘cb_mode’ may be used
> uninitialized in this function [-Wmaybe-uninitialized]
> ret = regmap_write(cbphy->hsiocfg, REG_COMBO_MODE(cbphy->bid), cb_mode);
> ~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/phy/intel/phy-intel-combo.c:204:24: note: ‘cb_mode’ was declared here
> enum intel_combo_mode cb_mode;
> ^~~~~~~
I noticed this warning while preparing the patch.
It sounds like false warning because:
1.) "cb_mode" is initialized in the switch case based on the "mode =
cbphy->phy_mode;"
2.) cbphy->phy_mode is initialized during the probe in
"intel_cbphy_fwnode_parse()" with one of the 3 values.
PHY_PCIE_MODE, PHY_SATA_MODE, PHY_XPCS_MODE.
3.) There is no chance of "cbphy->phy_mode" having different value.
4.) And "cb_mode" will be initialized according to the "mode =
cbphy->phy_mode;"
5.) Hence, there is no chance of "cb_mode" getting accessed uninitialized.
Regards,
Dilip
> Thanks
> Kishon
>>
>> Changes on v6:
>> Rebase patches on the latest maintainer's branch
>> https://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git/?h=phy-for-5.7
>> Dilip Kota (3):
>> dt-bindings: phy: Add PHY_TYPE_XPCS definition
>> dt-bindings: phy: Add YAML schemas for Intel ComboPhy
>> phy: intel: Add driver support for ComboPhy
>>
>> .../devicetree/bindings/phy/intel,combo-phy.yaml | 101 ++++
>> drivers/phy/intel/Kconfig | 14 +
>> drivers/phy/intel/Makefile | 1 +
>> drivers/phy/intel/phy-intel-combo.c | 632 +++++++++++++++++++++
>> include/dt-bindings/phy/phy.h | 1 +
>> 5 files changed, 749 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
>> create mode 100644 drivers/phy/intel/phy-intel-combo.c
>>
Dilip,
On 5/19/2020 9:26 AM, Dilip Kota wrote:
>
> On 5/18/2020 9:49 PM, Kishon Vijay Abraham I wrote:
>> Dilip,
>>
>> On 5/15/2020 1:43 PM, Dilip Kota wrote:
>>> This patch series adds Intel ComboPhy driver, respective yaml schemas
>>>
>>> Changes on v8:
>>> As per PHY Maintainer's request add description in comments for doing
>>> register access through register map framework.
>>>
>>> Changes on v7:
>>> As per System control driver maintainer's inputs remove
>>> fwnode_to_regmap() definition and use device_node_get_regmap()
>> Can you fix this warning and resend the patch?
>> drivers/phy/intel/phy-intel-combo.c:229:6: warning: ‘cb_mode’ may be used
>> uninitialized in this function [-Wmaybe-uninitialized]
>> ret = regmap_write(cbphy->hsiocfg, REG_COMBO_MODE(cbphy->bid), cb_mode);
>> ~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> drivers/phy/intel/phy-intel-combo.c:204:24: note: ‘cb_mode’ was declared here
>> enum intel_combo_mode cb_mode;
>> ^~~~~~~
> I noticed this warning while preparing the patch.
> It sounds like false warning because:
> 1.) "cb_mode" is initialized in the switch case based on the "mode =
> cbphy->phy_mode;"
> 2.) cbphy->phy_mode is initialized during the probe in
> "intel_cbphy_fwnode_parse()" with one of the 3 values.
> PHY_PCIE_MODE, PHY_SATA_MODE, PHY_XPCS_MODE.
> 3.) There is no chance of "cbphy->phy_mode" having different value.
> 4.) And "cb_mode" will be initialized according to the "mode = cbphy->phy_mode;"
> 5.) Hence, there is no chance of "cb_mode" getting accessed uninitialized.
Let's try to keep the compiler happy. Please fix this warning.
Thanks
Kishon
On 5/19/2020 1:17 PM, Kishon Vijay Abraham I wrote:
> Dilip,
>
> On 5/19/2020 9:26 AM, Dilip Kota wrote:
>> On 5/18/2020 9:49 PM, Kishon Vijay Abraham I wrote:
>>> Dilip,
>>>
>>> On 5/15/2020 1:43 PM, Dilip Kota wrote:
>>>> This patch series adds Intel ComboPhy driver, respective yaml schemas
>>>>
>>>> Changes on v8:
>>>> As per PHY Maintainer's request add description in comments for doing
>>>> register access through register map framework.
>>>>
>>>> Changes on v7:
>>>> As per System control driver maintainer's inputs remove
>>>> fwnode_to_regmap() definition and use device_node_get_regmap()
>>> Can you fix this warning and resend the patch?
>>> drivers/phy/intel/phy-intel-combo.c:229:6: warning: ‘cb_mode’ may be used
>>> uninitialized in this function [-Wmaybe-uninitialized]
>>> ret = regmap_write(cbphy->hsiocfg, REG_COMBO_MODE(cbphy->bid), cb_mode);
>>> ~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>> drivers/phy/intel/phy-intel-combo.c:204:24: note: ‘cb_mode’ was declared here
>>> enum intel_combo_mode cb_mode;
>>> ^~~~~~~
>> I noticed this warning while preparing the patch.
>> It sounds like false warning because:
>> 1.) "cb_mode" is initialized in the switch case based on the "mode =
>> cbphy->phy_mode;"
>> 2.) cbphy->phy_mode is initialized during the probe in
>> "intel_cbphy_fwnode_parse()" with one of the 3 values.
>> PHY_PCIE_MODE, PHY_SATA_MODE, PHY_XPCS_MODE.
>> 3.) There is no chance of "cbphy->phy_mode" having different value.
>> 4.) And "cb_mode" will be initialized according to the "mode = cbphy->phy_mode;"
>> 5.) Hence, there is no chance of "cb_mode" getting accessed uninitialized.
> Let's try to keep the compiler happy. Please fix this warning.
Sure, will fix it and send the patch series.
>
> Thanks
> Kishon