This patch series adds Intel ComboPhy driver, respective yaml schemas
and a kernel API fwnode_to_regmap().
ComboPhy driver calls it to get regmap handle through firmware node.
Dilip Kota (4):
mfd: syscon: Add fwnode_to_regmap
dt-bindings: phy: Add PHY_TYPE_XPCS definition
dt-bindings: phy: Add YAML schemas for Intel ComboPhy
phy: intel: Add driver support for ComboPhy
.../devicetree/bindings/phy/intel,combo-phy.yaml | 101 ++++
drivers/mfd/syscon.c | 8 +
drivers/phy/intel/Kconfig | 14 +
drivers/phy/intel/Makefile | 1 +
drivers/phy/intel/phy-intel-combo.c | 626 +++++++++++++++++++++
include/dt-bindings/phy/phy.h | 1 +
include/linux/mfd/syscon.h | 6 +
7 files changed, 757 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
create mode 100644 drivers/phy/intel/phy-intel-combo.c
--
2.11.0
Traverse regmap handle entry from firmware node handle.
Signed-off-by: Dilip Kota <[email protected]>
---
Changes on v5:
No changes
Changes on v4:
No changes
drivers/mfd/syscon.c | 8 ++++++++
include/linux/mfd/syscon.h | 6 ++++++
2 files changed, 14 insertions(+)
diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c
index e22197c832e8..08064ffc5394 100644
--- a/drivers/mfd/syscon.c
+++ b/drivers/mfd/syscon.c
@@ -178,6 +178,14 @@ struct regmap *device_node_to_regmap(struct device_node *np)
}
EXPORT_SYMBOL_GPL(device_node_to_regmap);
+struct regmap *fwnode_to_regmap(struct fwnode_handle *fwnode)
+{
+ struct device_node *np = to_of_node(fwnode);
+
+ return device_node_get_regmap(np, false);
+}
+EXPORT_SYMBOL_GPL(fwnode_to_regmap);
+
struct regmap *syscon_node_to_regmap(struct device_node *np)
{
if (!of_device_is_compatible(np, "syscon"))
diff --git a/include/linux/mfd/syscon.h b/include/linux/mfd/syscon.h
index 112dc66262cc..a024dd88bdd4 100644
--- a/include/linux/mfd/syscon.h
+++ b/include/linux/mfd/syscon.h
@@ -18,6 +18,7 @@ struct device_node;
#ifdef CONFIG_MFD_SYSCON
extern struct regmap *device_node_to_regmap(struct device_node *np);
+extern struct regmap *fwnode_to_regmap(struct fwnode_handle *fwnode);
extern struct regmap *syscon_node_to_regmap(struct device_node *np);
extern struct regmap *syscon_regmap_lookup_by_compatible(const char *s);
extern struct regmap *syscon_regmap_lookup_by_phandle(
@@ -29,6 +30,11 @@ static inline struct regmap *device_node_to_regmap(struct device_node *np)
return ERR_PTR(-ENOTSUPP);
}
+static inline struct regmap *fwnode_to_regmap(struct fwnode_handle *fwnode)
+{
+ return ERR_PTR(-ENOTSUPP);
+}
+
static inline struct regmap *syscon_node_to_regmap(struct device_node *np)
{
return ERR_PTR(-ENOTSUPP);
--
2.11.0
Add definition for Ethernet PCS phy type.
Signed-off-by: Dilip Kota <[email protected]>
---
include/dt-bindings/phy/phy.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/dt-bindings/phy/phy.h b/include/dt-bindings/phy/phy.h
index 1f3f866fae7b..3727ef72138b 100644
--- a/include/dt-bindings/phy/phy.h
+++ b/include/dt-bindings/phy/phy.h
@@ -17,5 +17,6 @@
#define PHY_TYPE_USB3 4
#define PHY_TYPE_UFS 5
#define PHY_TYPE_DP 6
+#define PHY_TYPE_XPCS 7
#endif /* _DT_BINDINGS_PHY */
--
2.11.0
ComboPhy subsystem provides PHY support to various
controllers, viz. PCIe, SATA and EMAC.
Adding YAML schemas for the same.
Signed-off-by: Dilip Kota <[email protected]>
---
Changes on v5:
Add changes as per Rob Herring inputs:
Use include/dt-bindings/phy/phy.h values to set intel,phy-mode.
Move children node properties to parent node and remove children
node completely.
Changes on v4:
No Change.
Changes on v3:
Add include/dt-bindings/phy/phy-intel-combphy.h for phy modes.
Add SoC specific compatible "intel,combophy-lgm".
Correct the nodename pattern.
clocks description removed and add maxItems entry.
Remove "simple-bus" as it expects minimum one address
cell and size cell in the children node. Call devm_of_platform_populate()
in the driver to perform "simple-bus" functionality.
Changes on v2:
Add custom 'select'
Pass hardware instance entries with phandles and
remove cell-index and bid entries
Clock, register address space, are same for the children.
So move them to parent node.
Two PHY instances cannot run in different modes,
so move the phy-mode entry to parent node.
Add second child entry in the DT example.
.../devicetree/bindings/phy/intel,combo-phy.yaml | 101 +++++++++++++++++++++
1 file changed, 101 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
diff --git a/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
new file mode 100644
index 000000000000..347d0cdfb80d
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/intel,combo-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel ComboPhy Subsystem
+
+maintainers:
+ - Dilip Kota <[email protected]>
+
+description: |
+ Intel Combophy subsystem supports PHYs for PCIe, EMAC and SATA
+ controllers. A single Combophy provides two PHY instances.
+
+properties:
+ $nodename:
+ pattern: "combophy(@.*|-[0-9a-f])*$"
+
+ compatible:
+ items:
+ - const: intel,combophy-lgm
+ - const: intel,combo-phy
+
+ clocks:
+ maxItems: 1
+
+ reg:
+ items:
+ - description: ComboPhy core registers
+ - description: PCIe app core control registers
+
+ reg-names:
+ items:
+ - const: core
+ - const: app
+
+ resets:
+ maxItems: 4
+
+ reset-names:
+ items:
+ - const: phy
+ - const: core
+ - const: iphy0
+ - const: iphy1
+
+ intel,syscfg:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: Chip configuration registers handle and ComboPhy instance id
+
+ intel,hsio:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: HSIO registers handle and ComboPhy instance id on NOC
+
+ intel,aggregation:
+ type: boolean
+ description: |
+ Specify the flag to configure ComboPHY in dual lane mode.
+
+ intel,phy-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Mode of the two phys in ComboPhy.
+ See dt-bindings/phy/phy.h for values.
+
+ "#phy-cells":
+ const: 1
+
+required:
+ - compatible
+ - clocks
+ - reg
+ - reg-names
+ - intel,syscfg
+ - intel,hsio
+ - intel,phy-mode
+ - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/phy/phy.h>
+ combophy@d0a00000 {
+ compatible = "intel,combophy-lgm", "intel,combo-phy";
+ clocks = <&cgu0 1>;
+ #phy-cells = <1>;
+ reg = <0xd0a00000 0x40000>,
+ <0xd0a40000 0x1000>;
+ reg-names = "core", "app";
+ resets = <&rcu0 0x50 6>,
+ <&rcu0 0x50 17>,
+ <&rcu0 0x50 23>,
+ <&rcu0 0x50 24>;
+ reset-names = "phy", "core", "iphy0", "iphy1";
+ intel,syscfg = <&sysconf 0>;
+ intel,hsio = <&hsiol 0>;
+ intel,phy-mode = <PHY_TYPE_PCIE>;
+ intel,aggregation;
+ };
--
2.11.0
ComboPhy subsystem provides PHYs for various
controllers like PCIe, SATA and EMAC.
Signed-off-by: Dilip Kota <[email protected]>
---
Changes on v5:
Add changes as per inputs from Andy and Rob:
DT node uses phy-mode values as defined in "include/dt-bindings/phy/phy.h",
add changes to handle it.
ComboPhy no longer has children nodes, and children node properties(reset)
moved to parent node, so do the code changes accordingly.
Add _xlate() function to pass the appropriate phy handle.
Fix couple of nitpicks.
Changes on v4:
Address review comments
Remove dependency on OF config
Update copyright to 2019-2020
Define register macro PAD_DIS_CFG instead of const variable inside function.
Improve the error prints, and error returns.
Call put_device(dev), for get_dev_from_fwnode()
Move platform_set_drvdata() at the end of the probe().
Correct alignment in phy_ops intel_cbphy_ops.
Correct commented lines with proper vocabulary and punctuation.
Add/remove commas for the required constant arrays and enums.
Remove in driver:
linux/kernel.h, not required
macros: PCIE_PHY_MPLLA_CTRL, PCIE_PHY_MPLLB_CTRL
temp variable u32 prop;
Change function names:
intel_cbphy_iphy_dt_parse() -> intel_cbphy_iphy_fwnode_parse()
intel_cbphy_dt_sanity_check() -> intel_cbphy_sanity_check()
intel_cbphy_dt_parse() -> intel_cbphy_fwnode_parse()
Changes on v3:
Remove intel_iphy_names
Remove struct phy in struct intel_cbphy_iphy
Imporve if conditions logic
Use fwnode_to_regmap()
Call devm_of_platform_populate() to populate child nodes
Fix reset sequence during phy_init
Add SoC specific compatible "intel,combophy-lgm"
Add description for enums
Remove default case in switch {} intel_cbphy_set_mode() as it
never happens.
Use mutex_lock to synchronise combophy initialization across
two phys.
Change init_cnt to u32 datatype as it is within mutex lock.
Correct error handling of
fwnode_property_read_u32_array(fwnode, "intel,phy-mode", ...)
drivers/phy/intel/Kconfig | 14 +
drivers/phy/intel/Makefile | 1 +
drivers/phy/intel/phy-intel-combo.c | 626 ++++++++++++++++++++++++++++++++++++
3 files changed, 641 insertions(+)
create mode 100644 drivers/phy/intel/phy-intel-combo.c
diff --git a/drivers/phy/intel/Kconfig b/drivers/phy/intel/Kconfig
index 4ea6a8897cd7..14705b80ec8b 100644
--- a/drivers/phy/intel/Kconfig
+++ b/drivers/phy/intel/Kconfig
@@ -2,6 +2,20 @@
#
# Phy drivers for Intel Lightning Mountain(LGM) platform
#
+config PHY_INTEL_COMBO
+ bool "Intel ComboPHY driver"
+ depends on X86 || COMPILE_TEST
+ depends on HAS_IOMEM
+ select MFD_SYSCON
+ select GENERIC_PHY
+ select REGMAP
+ help
+ Enable this to support Intel ComboPhy.
+
+ This driver configures ComboPhy subsystem on Intel gateway
+ chipsets which provides PHYs for various controllers, EMAC,
+ SATA and PCIe.
+
config PHY_INTEL_EMMC
tristate "Intel EMMC PHY driver"
select GENERIC_PHY
diff --git a/drivers/phy/intel/Makefile b/drivers/phy/intel/Makefile
index 6b876a75599d..233d530dadde 100644
--- a/drivers/phy/intel/Makefile
+++ b/drivers/phy/intel/Makefile
@@ -1,2 +1,3 @@
# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_PHY_INTEL_COMBO) += phy-intel-combo.o
obj-$(CONFIG_PHY_INTEL_EMMC) += phy-intel-emmc.o
diff --git a/drivers/phy/intel/phy-intel-combo.c b/drivers/phy/intel/phy-intel-combo.c
new file mode 100644
index 000000000000..6d89a06d3f1a
--- /dev/null
+++ b/drivers/phy/intel/phy-intel-combo.c
@@ -0,0 +1,626 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel Combo-PHY driver
+ *
+ * Copyright (C) 2019-2020 Intel Corporation.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/iopoll.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#include <dt-bindings/phy/phy.h>
+
+#define PCIE_PHY_GEN_CTRL 0x00
+#define PCIE_PHY_CLK_PAD BIT(17)
+
+#define PAD_DIS_CFG 0x174
+
+#define PCS_XF_ATE_OVRD_IN_2 0x3008
+#define ADAPT_REQ_MSK GENMASK(5, 4)
+
+#define PCS_XF_RX_ADAPT_ACK 0x3010
+#define RX_ADAPT_ACK_BIT BIT(0)
+
+#define CR_ADDR(addr, lane) (((addr) + (lane) * 0x100) << 2)
+#define REG_COMBO_MODE(x) ((x) * 0x200)
+#define REG_CLK_DISABLE(x) ((x) * 0x200 + 0x124)
+
+#define COMBO_PHY_ID(x) ((x)->parent->id)
+#define PHY_ID(x) ((x)->id)
+
+#define CLK_100MHZ 100000000
+#define CLK_156_25MHZ 156250000
+
+static const unsigned long intel_iphy_clk_rates[] = {
+ CLK_100MHZ, CLK_156_25MHZ, CLK_100MHZ,
+};
+
+enum {
+ PHY_0,
+ PHY_1,
+ PHY_MAX_NUM
+};
+
+/*
+ * Clock Register bit fields to enable clocks
+ * for ComboPhy according to the mode.
+ */
+enum intel_phy_mode {
+ PHY_PCIE_MODE = 0,
+ PHY_XPCS_MODE,
+ PHY_SATA_MODE,
+};
+
+/* ComboPhy mode Register values */
+enum intel_combo_mode {
+ PCIE0_PCIE1_MODE = 0,
+ PCIE_DL_MODE,
+ RXAUI_MODE,
+ XPCS0_XPCS1_MODE,
+ SATA0_SATA1_MODE,
+};
+
+enum aggregated_mode {
+ PHY_SL_MODE,
+ PHY_DL_MODE,
+};
+
+struct intel_combo_phy;
+
+struct intel_cbphy_iphy {
+ struct phy *phy;
+ struct intel_combo_phy *parent;
+ struct reset_control *app_rst;
+ u32 id;
+};
+
+struct intel_combo_phy {
+ struct device *dev;
+ struct clk *core_clk;
+ unsigned long clk_rate;
+ void __iomem *app_base;
+ void __iomem *cr_base;
+ struct regmap *syscfg;
+ struct regmap *hsiocfg;
+ u32 id;
+ u32 bid;
+ struct reset_control *phy_rst;
+ struct reset_control *core_rst;
+ struct intel_cbphy_iphy iphy[PHY_MAX_NUM];
+ enum intel_phy_mode phy_mode;
+ enum aggregated_mode aggr_mode;
+ u32 init_cnt;
+ struct mutex lock;
+};
+
+static int intel_cbphy_iphy_enable(struct intel_cbphy_iphy *iphy, bool set)
+{
+ struct intel_combo_phy *cbphy = iphy->parent;
+ u32 mask = BIT(cbphy->phy_mode * 2 + iphy->id);
+ u32 val;
+
+ /* Register: 0 is enable, 1 is disable */
+ val = set ? 0 : mask;
+
+ return regmap_update_bits(cbphy->hsiocfg, REG_CLK_DISABLE(cbphy->bid),
+ mask, val);
+}
+
+static int intel_cbphy_pcie_refclk_cfg(struct intel_cbphy_iphy *iphy, bool set)
+{
+ struct intel_combo_phy *cbphy = iphy->parent;
+ u32 mask = BIT(cbphy->id * 2 + iphy->id);
+ u32 val;
+
+ /* Register: 0 is enable, 1 is disable */
+ val = set ? 0 : mask;
+
+ return regmap_update_bits(cbphy->syscfg, PAD_DIS_CFG, mask, val);
+}
+
+static inline void combo_phy_w32_off_mask(void __iomem *base, unsigned int reg,
+ u32 mask, u32 val)
+{
+ u32 reg_val;
+
+ reg_val = readl(base + reg);
+ reg_val &= ~mask;
+ reg_val |= FIELD_PREP(mask, val);
+ writel(reg_val, base + reg);
+}
+
+static int intel_cbphy_iphy_cfg(struct intel_cbphy_iphy *iphy,
+ int (*phy_cfg)(struct intel_cbphy_iphy *))
+{
+ struct intel_combo_phy *cbphy = iphy->parent;
+ int ret;
+
+ ret = phy_cfg(iphy);
+ if (ret)
+ return ret;
+
+ if (cbphy->aggr_mode != PHY_DL_MODE)
+ return 0;
+
+ return phy_cfg(&cbphy->iphy[PHY_1]);
+}
+
+static int intel_cbphy_pcie_en_pad_refclk(struct intel_cbphy_iphy *iphy)
+{
+ struct intel_combo_phy *cbphy = iphy->parent;
+ int ret;
+
+ ret = intel_cbphy_pcie_refclk_cfg(iphy, true);
+ if (ret) {
+ dev_err(cbphy->dev, "Failed to enable PCIe pad refclk\n");
+ return ret;
+ }
+
+ if (cbphy->init_cnt)
+ return 0;
+
+ combo_phy_w32_off_mask(cbphy->app_base, PCIE_PHY_GEN_CTRL,
+ PCIE_PHY_CLK_PAD, 0);
+
+ /* Delay for stable clock PLL */
+ usleep_range(50, 100);
+
+ return 0;
+}
+
+static int intel_cbphy_pcie_dis_pad_refclk(struct intel_cbphy_iphy *iphy)
+{
+ struct intel_combo_phy *cbphy = iphy->parent;
+ int ret;
+
+ ret = intel_cbphy_pcie_refclk_cfg(iphy, false);
+ if (ret) {
+ dev_err(cbphy->dev, "Failed to disable PCIe pad refclk\n");
+ return ret;
+ }
+
+ if (cbphy->init_cnt)
+ return 0;
+
+ combo_phy_w32_off_mask(cbphy->app_base, PCIE_PHY_GEN_CTRL,
+ PCIE_PHY_CLK_PAD, 1);
+
+ return 0;
+}
+
+static int intel_cbphy_set_mode(struct intel_combo_phy *cbphy)
+{
+ enum aggregated_mode aggr = cbphy->aggr_mode;
+ struct device *dev = cbphy->dev;
+ enum intel_combo_mode cb_mode;
+ enum intel_phy_mode mode;
+ int ret;
+
+ mode = cbphy->phy_mode;
+
+ switch (mode) {
+ case PHY_PCIE_MODE:
+ cb_mode = (aggr == PHY_DL_MODE) ? PCIE_DL_MODE : PCIE0_PCIE1_MODE;
+ break;
+
+ case PHY_XPCS_MODE:
+ cb_mode = (aggr == PHY_DL_MODE) ? RXAUI_MODE : XPCS0_XPCS1_MODE;
+ break;
+
+ case PHY_SATA_MODE:
+ if (aggr == PHY_DL_MODE) {
+ dev_err(dev, "Mode:%u not support dual lane!\n", mode);
+ return -EINVAL;
+ }
+
+ cb_mode = SATA0_SATA1_MODE;
+ break;
+ }
+
+ ret = regmap_write(cbphy->hsiocfg, REG_COMBO_MODE(cbphy->bid), cb_mode);
+ if (ret)
+ dev_err(dev, "Failed to set ComboPhy mode: %d\n", ret);
+
+ return ret;
+}
+
+static void intel_cbphy_rst_assert(struct intel_combo_phy *cbphy)
+{
+ reset_control_assert(cbphy->core_rst);
+ reset_control_assert(cbphy->phy_rst);
+}
+
+static void intel_cbphy_rst_deassert(struct intel_combo_phy *cbphy)
+{
+ reset_control_deassert(cbphy->core_rst);
+ reset_control_deassert(cbphy->phy_rst);
+ /* Delay to ensure reset process is done */
+ usleep_range(10, 20);
+}
+
+static int intel_cbphy_iphy_power_on(struct intel_cbphy_iphy *iphy)
+{
+ struct intel_combo_phy *cbphy = iphy->parent;
+ int ret;
+
+ if (!cbphy->init_cnt) {
+ ret = clk_prepare_enable(cbphy->core_clk);
+ if (ret) {
+ dev_err(cbphy->dev, "Clock enable failed!\n");
+ return ret;
+ }
+
+ ret = clk_set_rate(cbphy->core_clk, cbphy->clk_rate);
+ if (ret) {
+ dev_err(cbphy->dev, "Clock freq set to %lu failed!\n",
+ cbphy->clk_rate);
+ goto clk_err;
+ }
+
+ intel_cbphy_rst_assert(cbphy);
+ intel_cbphy_rst_deassert(cbphy);
+ ret = intel_cbphy_set_mode(cbphy);
+ if (ret)
+ goto clk_err;
+ }
+
+ ret = intel_cbphy_iphy_enable(iphy, true);
+ if (ret) {
+ dev_err(cbphy->dev, "Failed enabling PHY core\n");
+ goto clk_err;
+ }
+
+ ret = reset_control_deassert(iphy->app_rst);
+ if (ret) {
+ dev_err(cbphy->dev, "PHY(%u:%u) reset deassert failed!\n",
+ COMBO_PHY_ID(iphy), PHY_ID(iphy));
+ goto clk_err;
+ }
+
+ /* Delay to ensure reset process is done */
+ udelay(1);
+
+ return 0;
+
+clk_err:
+ clk_disable_unprepare(cbphy->core_clk);
+
+ return ret;
+}
+
+static int intel_cbphy_iphy_power_off(struct intel_cbphy_iphy *iphy)
+{
+ struct intel_combo_phy *cbphy = iphy->parent;
+ int ret;
+
+ ret = reset_control_assert(iphy->app_rst);
+ if (ret) {
+ dev_err(cbphy->dev, "PHY(%u:%u) reset assert failed!\n",
+ COMBO_PHY_ID(iphy), PHY_ID(iphy));
+ return ret;
+ }
+
+ ret = intel_cbphy_iphy_enable(iphy, false);
+ if (ret) {
+ dev_err(cbphy->dev, "Failed disabling PHY core\n");
+ return ret;
+ }
+
+ if (cbphy->init_cnt)
+ return 0;
+
+ clk_disable_unprepare(cbphy->core_clk);
+ intel_cbphy_rst_assert(cbphy);
+
+ return 0;
+}
+
+static int intel_cbphy_init(struct phy *phy)
+{
+ struct intel_cbphy_iphy *iphy = phy_get_drvdata(phy);
+ struct intel_combo_phy *cbphy = iphy->parent;
+ int ret;
+
+ mutex_lock(&cbphy->lock);
+ ret = intel_cbphy_iphy_cfg(iphy, intel_cbphy_iphy_power_on);
+ if (ret)
+ goto err;
+
+ if (cbphy->phy_mode == PHY_PCIE_MODE) {
+ ret = intel_cbphy_iphy_cfg(iphy, intel_cbphy_pcie_en_pad_refclk);
+ if (ret)
+ goto err;
+ }
+
+ cbphy->init_cnt++;
+
+err:
+ mutex_unlock(&cbphy->lock);
+
+ return ret;
+}
+
+static int intel_cbphy_exit(struct phy *phy)
+{
+ struct intel_cbphy_iphy *iphy = phy_get_drvdata(phy);
+ struct intel_combo_phy *cbphy = iphy->parent;
+ int ret;
+
+ mutex_lock(&cbphy->lock);
+ cbphy->init_cnt--;
+ if (cbphy->phy_mode == PHY_PCIE_MODE) {
+ ret = intel_cbphy_iphy_cfg(iphy, intel_cbphy_pcie_dis_pad_refclk);
+ if (ret)
+ goto err;
+ }
+
+ ret = intel_cbphy_iphy_cfg(iphy, intel_cbphy_iphy_power_off);
+
+err:
+ mutex_unlock(&cbphy->lock);
+
+ return ret;
+}
+
+static int intel_cbphy_calibrate(struct phy *phy)
+{
+ struct intel_cbphy_iphy *iphy = phy_get_drvdata(phy);
+ struct intel_combo_phy *cbphy = iphy->parent;
+ void __iomem *cr_base = cbphy->cr_base;
+ int val, ret, id;
+
+ if (cbphy->phy_mode != PHY_XPCS_MODE)
+ return 0;
+
+ id = PHY_ID(iphy);
+
+ /* trigger auto RX adaptation */
+ combo_phy_w32_off_mask(cr_base, CR_ADDR(PCS_XF_ATE_OVRD_IN_2, id),
+ ADAPT_REQ_MSK, 3);
+ /* Wait RX adaptation to finish */
+ ret = readl_poll_timeout(cr_base + CR_ADDR(PCS_XF_RX_ADAPT_ACK, id),
+ val, val & RX_ADAPT_ACK_BIT, 10, 5000);
+ if (ret)
+ dev_err(cbphy->dev, "RX Adaptation failed!\n");
+ else
+ dev_dbg(cbphy->dev, "RX Adaptation success!\n");
+
+ /* Stop RX adaptation */
+ combo_phy_w32_off_mask(cr_base, CR_ADDR(PCS_XF_ATE_OVRD_IN_2, id),
+ ADAPT_REQ_MSK, 0);
+
+ return ret;
+}
+
+static int intel_cbphy_fwnode_parse(struct intel_combo_phy *cbphy)
+{
+ struct device *dev = cbphy->dev;
+ struct platform_device *pdev = to_platform_device(dev);
+ struct fwnode_handle *fwnode = dev_fwnode(dev);
+ struct fwnode_reference_args ref;
+ int ret;
+ u32 val;
+
+ cbphy->core_clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(cbphy->core_clk)) {
+ ret = PTR_ERR(cbphy->core_clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "Get clk failed:%d!\n", ret);
+ return ret;
+ }
+
+ cbphy->core_rst = devm_reset_control_get_optional(dev, "core");
+ if (IS_ERR(cbphy->core_rst)) {
+ ret = PTR_ERR(cbphy->core_rst);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "Get core reset control err: %d!\n", ret);
+ return ret;
+ }
+
+ cbphy->phy_rst = devm_reset_control_get_optional(dev, "phy");
+ if (IS_ERR(cbphy->phy_rst)) {
+ ret = PTR_ERR(cbphy->phy_rst);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "Get PHY reset control err: %d!\n", ret);
+ return ret;
+ }
+
+ cbphy->iphy[0].app_rst = devm_reset_control_get_optional(dev, "iphy0");
+ if (IS_ERR(cbphy->iphy[0].app_rst)) {
+ ret = PTR_ERR(cbphy->iphy[0].app_rst);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "Get phy0 reset control err: %d!\n", ret);
+ return ret;
+ }
+
+ cbphy->iphy[1].app_rst = devm_reset_control_get_optional(dev, "iphy1");
+ if (IS_ERR(cbphy->iphy[1].app_rst)) {
+ ret = PTR_ERR(cbphy->iphy[1].app_rst);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "Get phy1 reset control err: %d!\n", ret);
+ return ret;
+ }
+
+ cbphy->app_base = devm_platform_ioremap_resource_byname(pdev, "app");
+ if (IS_ERR(cbphy->app_base))
+ return PTR_ERR(cbphy->app_base);
+
+ cbphy->cr_base = devm_platform_ioremap_resource_byname(pdev, "core");
+ if (IS_ERR(cbphy->cr_base))
+ return PTR_ERR(cbphy->cr_base);
+
+ ret = fwnode_property_get_reference_args(fwnode, "intel,syscfg", NULL,
+ 1, 0, &ref);
+ if (ret < 0)
+ return ret;
+
+ cbphy->id = ref.args[0];
+ cbphy->syscfg = fwnode_to_regmap(ref.fwnode);
+ fwnode_handle_put(ref.fwnode);
+
+ ret = fwnode_property_get_reference_args(fwnode, "intel,hsio", NULL, 1,
+ 0, &ref);
+ if (ret < 0)
+ return ret;
+
+ cbphy->bid = ref.args[0];
+ cbphy->hsiocfg = fwnode_to_regmap(ref.fwnode);
+ fwnode_handle_put(ref.fwnode);
+
+ ret = fwnode_property_read_u32_array(fwnode, "intel,phy-mode", &val, 1);
+ if (ret)
+ return ret;
+
+ switch (val) {
+ case PHY_TYPE_PCIE:
+ cbphy->phy_mode = PHY_PCIE_MODE;
+ break;
+
+ case PHY_TYPE_SATA:
+ cbphy->phy_mode = PHY_SATA_MODE;
+ break;
+
+ case PHY_TYPE_XPCS:
+ cbphy->phy_mode = PHY_XPCS_MODE;
+ break;
+
+ default:
+ dev_err(dev, "Invalid PHY mode: %u\n", val);
+ return -EINVAL;
+ }
+
+ cbphy->clk_rate = intel_iphy_clk_rates[cbphy->phy_mode];
+
+ if (fwnode_property_present(fwnode, "intel,aggregation"))
+ cbphy->aggr_mode = PHY_DL_MODE;
+ else
+ cbphy->aggr_mode = PHY_SL_MODE;
+
+ return 0;
+}
+
+static const struct phy_ops intel_cbphy_ops = {
+ .init = intel_cbphy_init,
+ .exit = intel_cbphy_exit,
+ .calibrate = intel_cbphy_calibrate,
+ .owner = THIS_MODULE,
+};
+
+static struct phy *intel_cbphy_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct intel_combo_phy *cbphy = dev_get_drvdata(dev);
+ u32 iphy_id;
+
+ if (args->args_count < 1) {
+ dev_err(dev, "Invalid number of arguments\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ iphy_id = args->args[0];
+ if (iphy_id >= PHY_MAX_NUM) {
+ dev_err(dev, "Invalid phy instance %d\n", iphy_id);
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (cbphy->aggr_mode == PHY_DL_MODE && iphy_id == PHY_1) {
+ dev_err(dev, "Invalid. ComboPhy is in Dual lane mode %d\n", iphy_id);
+ return ERR_PTR(-EINVAL);
+ }
+
+ return cbphy->iphy[iphy_id].phy;
+}
+
+static int intel_cbphy_create(struct intel_combo_phy *cbphy)
+{
+ struct phy_provider *phy_provider;
+ struct device *dev = cbphy->dev;
+ struct intel_cbphy_iphy *iphy;
+ int i;
+
+ for (i = 0; i < PHY_MAX_NUM; i++) {
+ iphy = &cbphy->iphy[i];
+ iphy->parent = cbphy;
+ iphy->id = i;
+
+ /* In dual lane mode skip phy creation for the second phy */
+ if (cbphy->aggr_mode == PHY_DL_MODE && iphy->id == PHY_1)
+ continue;
+
+ iphy->phy = devm_phy_create(dev, NULL, &intel_cbphy_ops);
+ if (IS_ERR(iphy->phy)) {
+ dev_err(dev, "PHY[%u:%u]: create PHY instance failed!\n",
+ COMBO_PHY_ID(iphy), PHY_ID(iphy));
+
+ return PTR_ERR(iphy->phy);
+ }
+
+ phy_set_drvdata(iphy->phy, iphy);
+ }
+
+ dev_set_drvdata(dev, cbphy);
+ phy_provider = devm_of_phy_provider_register(dev, intel_cbphy_xlate);
+ if (IS_ERR(phy_provider))
+ dev_err(dev, "Register PHY provider failed!\n");
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static int intel_cbphy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct intel_combo_phy *cbphy;
+ int ret;
+
+ cbphy = devm_kzalloc(dev, sizeof(*cbphy), GFP_KERNEL);
+ if (!cbphy)
+ return -ENOMEM;
+
+ cbphy->dev = dev;
+ cbphy->init_cnt = 0;
+ mutex_init(&cbphy->lock);
+ ret = intel_cbphy_fwnode_parse(cbphy);
+ if (ret)
+ return ret;
+
+ platform_set_drvdata(pdev, cbphy);
+
+ return intel_cbphy_create(cbphy);
+}
+
+static int intel_cbphy_remove(struct platform_device *pdev)
+{
+ struct intel_combo_phy *cbphy = platform_get_drvdata(pdev);
+
+ intel_cbphy_rst_assert(cbphy);
+ clk_disable_unprepare(cbphy->core_clk);
+ return 0;
+}
+
+static const struct of_device_id of_intel_cbphy_match[] = {
+ { .compatible = "intel,combo-phy" },
+ { .compatible = "intel,combophy-lgm" },
+ {}
+};
+
+static struct platform_driver intel_cbphy_driver = {
+ .probe = intel_cbphy_probe,
+ .remove = intel_cbphy_remove,
+ .driver = {
+ .name = "intel-combo-phy",
+ .of_match_table = of_intel_cbphy_match,
+ }
+};
+
+module_platform_driver(intel_cbphy_driver);
+
+MODULE_DESCRIPTION("Intel Combo-phy driver");
+MODULE_LICENSE("GPL v2");
--
2.11.0
On Wed, 25 Mar 2020 16:59:38 +0800, Dilip Kota wrote:
> Add definition for Ethernet PCS phy type.
>
> Signed-off-by: Dilip Kota <[email protected]>
> ---
> include/dt-bindings/phy/phy.h | 1 +
> 1 file changed, 1 insertion(+)
>
Acked-by: Rob Herring <[email protected]>
On Wed, 25 Mar 2020 16:59:39 +0800, Dilip Kota wrote:
> ComboPhy subsystem provides PHY support to various
> controllers, viz. PCIe, SATA and EMAC.
> Adding YAML schemas for the same.
>
> Signed-off-by: Dilip Kota <[email protected]>
> ---
> Changes on v5:
> Add changes as per Rob Herring inputs:
> Use include/dt-bindings/phy/phy.h values to set intel,phy-mode.
> Move children node properties to parent node and remove children
> node completely.
>
> Changes on v4:
> No Change.
>
> Changes on v3:
>
> Add include/dt-bindings/phy/phy-intel-combphy.h for phy modes.
> Add SoC specific compatible "intel,combophy-lgm".
> Correct the nodename pattern.
> clocks description removed and add maxItems entry.
> Remove "simple-bus" as it expects minimum one address
> cell and size cell in the children node. Call devm_of_platform_populate()
> in the driver to perform "simple-bus" functionality.
>
> Changes on v2:
>
> Add custom 'select'
> Pass hardware instance entries with phandles and
> remove cell-index and bid entries
> Clock, register address space, are same for the children.
> So move them to parent node.
> Two PHY instances cannot run in different modes,
> so move the phy-mode entry to parent node.
> Add second child entry in the DT example.
>
> .../devicetree/bindings/phy/intel,combo-phy.yaml | 101 +++++++++++++++++++++
> 1 file changed, 101 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
>
Reviewed-by: Rob Herring <[email protected]>
On Wed, 25 Mar 2020, Dilip Kota wrote:
> Traverse regmap handle entry from firmware node handle.
>
> Signed-off-by: Dilip Kota <[email protected]>
> ---
> Changes on v5:
> No changes
>
> Changes on v4:
> No changes
>
> drivers/mfd/syscon.c | 8 ++++++++
> include/linux/mfd/syscon.h | 6 ++++++
> 2 files changed, 14 insertions(+)
I think you'll find it very difficult to have a patch merged if you do
not send it to any Maintainers of the associated subsystem(s).
Did you use `scripts/get_maintainer.pl` at all?
> diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c
> index e22197c832e8..08064ffc5394 100644
> --- a/drivers/mfd/syscon.c
> +++ b/drivers/mfd/syscon.c
> @@ -178,6 +178,14 @@ struct regmap *device_node_to_regmap(struct device_node *np)
> }
> EXPORT_SYMBOL_GPL(device_node_to_regmap);
>
> +struct regmap *fwnode_to_regmap(struct fwnode_handle *fwnode)
> +{
> + struct device_node *np = to_of_node(fwnode);
> +
> + return device_node_get_regmap(np, false);
> +}
> +EXPORT_SYMBOL_GPL(fwnode_to_regmap);
> +
> struct regmap *syscon_node_to_regmap(struct device_node *np)
> {
> if (!of_device_is_compatible(np, "syscon"))
> diff --git a/include/linux/mfd/syscon.h b/include/linux/mfd/syscon.h
> index 112dc66262cc..a024dd88bdd4 100644
> --- a/include/linux/mfd/syscon.h
> +++ b/include/linux/mfd/syscon.h
> @@ -18,6 +18,7 @@ struct device_node;
>
> #ifdef CONFIG_MFD_SYSCON
> extern struct regmap *device_node_to_regmap(struct device_node *np);
> +extern struct regmap *fwnode_to_regmap(struct fwnode_handle *fwnode);
> extern struct regmap *syscon_node_to_regmap(struct device_node *np);
> extern struct regmap *syscon_regmap_lookup_by_compatible(const char *s);
> extern struct regmap *syscon_regmap_lookup_by_phandle(
> @@ -29,6 +30,11 @@ static inline struct regmap *device_node_to_regmap(struct device_node *np)
> return ERR_PTR(-ENOTSUPP);
> }
>
> +static inline struct regmap *fwnode_to_regmap(struct fwnode_handle *fwnode)
> +{
> + return ERR_PTR(-ENOTSUPP);
> +}
> +
> static inline struct regmap *syscon_node_to_regmap(struct device_node *np)
> {
> return ERR_PTR(-ENOTSUPP);
--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
On 4/15/2020 5:31 PM, Lee Jones wrote:
> On Wed, 25 Mar 2020, Dilip Kota wrote:
>
>> Traverse regmap handle entry from firmware node handle.
>>
>> Signed-off-by: Dilip Kota <[email protected]>
>> ---
>> Changes on v5:
>> No changes
>>
>> Changes on v4:
>> No changes
>>
>> drivers/mfd/syscon.c | 8 ++++++++
>> include/linux/mfd/syscon.h | 6 ++++++
>> 2 files changed, 14 insertions(+)
> I think you'll find it very difficult to have a patch merged if you do
> not send it to any Maintainers of the associated subsystem(s).
Sorry, i completely missed adding the system configuration Maintainers.
I was completely thinking about the PHY driver( in doing changes and
upgrades) while sending the patches.
I have noticed it, and already sent v6 patch series by adding you and
[email protected]
"[RESEND PATCH v6 0/4] Add Intel ComboPhy driver"
Snippet from the mail.
"Re-sending the patches v6 by adding the system configuration Maintainers,
which i missed to add them."
Regards,
Dilip
>
> Did you use `scripts/get_maintainer.pl` at all?
>
On Thu, 16 Apr 2020, Dilip Kota wrote:
>
> On 4/15/2020 5:31 PM, Lee Jones wrote:
> > On Wed, 25 Mar 2020, Dilip Kota wrote:
> >
> > > Traverse regmap handle entry from firmware node handle.
> > >
> > > Signed-off-by: Dilip Kota <[email protected]>
> > > ---
> > > Changes on v5:
> > > No changes
> > >
> > > Changes on v4:
> > > No changes
> > >
> > > drivers/mfd/syscon.c | 8 ++++++++
> > > include/linux/mfd/syscon.h | 6 ++++++
> > > 2 files changed, 14 insertions(+)
> > I think you'll find it very difficult to have a patch merged if you do
> > not send it to any Maintainers of the associated subsystem(s).
> Sorry, i completely missed adding the system configuration Maintainers. I
> was completely thinking about the PHY driver( in doing changes and upgrades)
> while sending the patches.
> I have noticed it, and already sent v6 patch series by adding you and
> [email protected]
>
> "[RESEND PATCH v6 0/4] Add Intel ComboPhy driver"
> Snippet from the mail.
>
> "Re-sending the patches v6 by adding the system configuration Maintainers,
> which i missed to add them."
I have it now. Thanks.
--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog