Dne 24.10.2016 v 05:59 Icenowy Zheng napsal(a):
> Allwinner SoC's PHY 0, when used as OTG controller, have no pmu part.
> The code that poke some unknown bit of PMU for H3/A64 didn't check
> the PHY, and will cause kernel oops when PHY 0 is used.
>
> Fixes: b3e0d141ca9f (phy: sun4i: add support for A64 usb phy)
>
> Signed-off-by: Icenowy Zheng <[email protected]>
> ---
> drivers/phy/phy-sun4i-usb.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
> index b9342a2..ff8e9dd 100644
> --- a/drivers/phy/phy-sun4i-usb.c
> +++ b/drivers/phy/phy-sun4i-usb.c
> @@ -264,7 +264,7 @@ static int sun4i_usb_phy_init(struct phy *_phy)
> return ret;
> }
>
> - if (data->cfg->enable_pmu_unk1) {
> + if (phy->index != 0 && data->cfg->enable_pmu_unk1) {
It might be better to check for phy->pmu directly.
regards,
o.
> val = readl(phy->pmu + REG_PMU_UNK1);
> writel(val & ~2, phy->pmu + REG_PMU_UNK1);
> }
>