This series officializes the device tree bindings for the embedded
Ethernet switch on NXP LS1028A (and for the reference design board).
The driver has been in the tree since v5.4-rc6.
It also performs some DT binding changes and minor cleanup, as per
feedback received in v1 and v2:
- I've changed the DT bindings for the internal ports from "gmii" to
"internal". This means changing the ENETC phy-mode as well, for
uniformity. So I would like the entire series to be merged through a
single tree, probably the devicetree one - something which David
Miller has aggreed to, here [0].
- Disabled all Ethernet ports in the LS1028A DTSI by default, which
means not only the newly introduced switch ports, but also RGMII
standalone port 1.
[0]: https://lkml.org/lkml/2020/2/19/973
Claudiu Manoil (2):
arm64: dts: fsl: ls1028a: add node for Felix switch
arm64: dts: fsl: ls1028a: enable switch PHYs on RDB
Vladimir Oltean (4):
arm64: dts: fsl: ls1028a: delete extraneous #interrupt-cells for ENETC
RCIE
arm64: dts: fsl: ls1028a: disable all enetc ports by default
net: dsa: felix: Use PHY_INTERFACE_MODE_INTERNAL instead of GMII
dt-bindings: net: dsa: ocelot: document the vsc9959 core
.../devicetree/bindings/net/dsa/ocelot.txt | 116 ++++++++++++++++++
.../boot/dts/freescale/fsl-ls1028a-qds.dts | 1 +
.../boot/dts/freescale/fsl-ls1028a-rdb.dts | 61 ++++++++-
.../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 89 +++++++++++++-
drivers/net/dsa/ocelot/felix.c | 3 +-
drivers/net/dsa/ocelot/felix_vsc9959.c | 3 +-
6 files changed, 265 insertions(+), 8 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/dsa/ocelot.txt
--
2.17.1
On Sun, Feb 23, 2020 at 10:47:10PM +0200, Vladimir Oltean wrote:
> This series officializes the device tree bindings for the embedded
> Ethernet switch on NXP LS1028A (and for the reference design board).
> The driver has been in the tree since v5.4-rc6.
>
> It also performs some DT binding changes and minor cleanup, as per
> feedback received in v1 and v2:
>
> - I've changed the DT bindings for the internal ports from "gmii" to
> "internal". This means changing the ENETC phy-mode as well, for
> uniformity. So I would like the entire series to be merged through a
> single tree, probably the devicetree one - something which David
> Miller has aggreed to, here [0].
> - Disabled all Ethernet ports in the LS1028A DTSI by default, which
> means not only the newly introduced switch ports, but also RGMII
> standalone port 1.
>
> [0]: https://lkml.org/lkml/2020/2/19/973
>
> Claudiu Manoil (2):
> arm64: dts: fsl: ls1028a: add node for Felix switch
> arm64: dts: fsl: ls1028a: enable switch PHYs on RDB
>
> Vladimir Oltean (4):
> arm64: dts: fsl: ls1028a: delete extraneous #interrupt-cells for ENETC
> RCIE
> arm64: dts: fsl: ls1028a: disable all enetc ports by default
I applied these 4 DTS patches with changing prefix to 'arm64: dts: ls1028a: '.
Shawn
> net: dsa: felix: Use PHY_INTERFACE_MODE_INTERNAL instead of GMII
> dt-bindings: net: dsa: ocelot: document the vsc9959 core
>
> .../devicetree/bindings/net/dsa/ocelot.txt | 116 ++++++++++++++++++
> .../boot/dts/freescale/fsl-ls1028a-qds.dts | 1 +
> .../boot/dts/freescale/fsl-ls1028a-rdb.dts | 61 ++++++++-
> .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 89 +++++++++++++-
> drivers/net/dsa/ocelot/felix.c | 3 +-
> drivers/net/dsa/ocelot/felix_vsc9959.c | 3 +-
> 6 files changed, 265 insertions(+), 8 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/net/dsa/ocelot.txt
>
> --
> 2.17.1
>
Hi Shawn,
Am 2020-02-24 12:20, schrieb Shawn Guo:
> On Sun, Feb 23, 2020 at 10:47:10PM +0200, Vladimir Oltean wrote:
>> This series officializes the device tree bindings for the embedded
>> Ethernet switch on NXP LS1028A (and for the reference design board).
>> The driver has been in the tree since v5.4-rc6.
>>
>> It also performs some DT binding changes and minor cleanup, as per
>> feedback received in v1 and v2:
>>
>> - I've changed the DT bindings for the internal ports from "gmii" to
>> "internal". This means changing the ENETC phy-mode as well, for
>> uniformity. So I would like the entire series to be merged through a
>> single tree, probably the devicetree one - something which David
>> Miller has aggreed to, here [0].
>> - Disabled all Ethernet ports in the LS1028A DTSI by default, which
>> means not only the newly introduced switch ports, but also RGMII
>> standalone port 1.
>>
>> [0]: https://lkml.org/lkml/2020/2/19/973
>>
>> Claudiu Manoil (2):
>> arm64: dts: fsl: ls1028a: add node for Felix switch
>> arm64: dts: fsl: ls1028a: enable switch PHYs on RDB
>>
>> Vladimir Oltean (4):
>> arm64: dts: fsl: ls1028a: delete extraneous #interrupt-cells for
>> ENETC
>> RCIE
>> arm64: dts: fsl: ls1028a: disable all enetc ports by default
>
> I applied these 4 DTS patches with changing prefix to 'arm64: dts:
> ls1028a: '.
Oh, then the kontron-sl28 boards won't have ethernet because the nodes
are
disabled now. I'll send a patch shortly which explicitly sets the status
to
"okay", hopefully you can pick it up so it'll end up in the same pull
request
as this one:
arm64: dts: fsl: ls1028a: disable all enetc ports by default
-michael
>
> Shawn
>
>> net: dsa: felix: Use PHY_INTERFACE_MODE_INTERNAL instead of GMII
>> dt-bindings: net: dsa: ocelot: document the vsc9959 core
>>
>> .../devicetree/bindings/net/dsa/ocelot.txt | 116
>> ++++++++++++++++++
>> .../boot/dts/freescale/fsl-ls1028a-qds.dts | 1 +
>> .../boot/dts/freescale/fsl-ls1028a-rdb.dts | 61 ++++++++-
>> .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 89 +++++++++++++-
>> drivers/net/dsa/ocelot/felix.c | 3 +-
>> drivers/net/dsa/ocelot/felix_vsc9959.c | 3 +-
>> 6 files changed, 265 insertions(+), 8 deletions(-)
>> create mode 100644
>> Documentation/devicetree/bindings/net/dsa/ocelot.txt
>>
>> --
>> 2.17.1
>>
Hi Michael,
On Mon, 24 Feb 2020 at 13:38, Michael Walle <[email protected]> wrote:
>
> Hi Shawn,
>
> Am 2020-02-24 12:20, schrieb Shawn Guo:
> > On Sun, Feb 23, 2020 at 10:47:10PM +0200, Vladimir Oltean wrote:
> >> This series officializes the device tree bindings for the embedded
> >> Ethernet switch on NXP LS1028A (and for the reference design board).
> >> The driver has been in the tree since v5.4-rc6.
> >>
> >> It also performs some DT binding changes and minor cleanup, as per
> >> feedback received in v1 and v2:
> >>
> >> - I've changed the DT bindings for the internal ports from "gmii" to
> >> "internal". This means changing the ENETC phy-mode as well, for
> >> uniformity. So I would like the entire series to be merged through a
> >> single tree, probably the devicetree one - something which David
> >> Miller has aggreed to, here [0].
> >> - Disabled all Ethernet ports in the LS1028A DTSI by default, which
> >> means not only the newly introduced switch ports, but also RGMII
> >> standalone port 1.
> >>
> >> [0]: https://lkml.org/lkml/2020/2/19/973
> >>
> >> Claudiu Manoil (2):
> >> arm64: dts: fsl: ls1028a: add node for Felix switch
> >> arm64: dts: fsl: ls1028a: enable switch PHYs on RDB
> >>
> >> Vladimir Oltean (4):
> >> arm64: dts: fsl: ls1028a: delete extraneous #interrupt-cells for
> >> ENETC
> >> RCIE
> >> arm64: dts: fsl: ls1028a: disable all enetc ports by default
> >
> > I applied these 4 DTS patches with changing prefix to 'arm64: dts:
> > ls1028a: '.
>
> Oh, then the kontron-sl28 boards won't have ethernet because the nodes
> are
> disabled now. I'll send a patch shortly which explicitly sets the status
> to
> "okay", hopefully you can pick it up so it'll end up in the same pull
> request
> as this one:
>
> arm64: dts: fsl: ls1028a: disable all enetc ports by default
>
Sorry, I didn't notice your board.
> -michael
>
> >
> > Shawn
> >
> >> net: dsa: felix: Use PHY_INTERFACE_MODE_INTERNAL instead of GMII
> >> dt-bindings: net: dsa: ocelot: document the vsc9959 core
> >>
> >> .../devicetree/bindings/net/dsa/ocelot.txt | 116
> >> ++++++++++++++++++
> >> .../boot/dts/freescale/fsl-ls1028a-qds.dts | 1 +
> >> .../boot/dts/freescale/fsl-ls1028a-rdb.dts | 61 ++++++++-
> >> .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 89 +++++++++++++-
> >> drivers/net/dsa/ocelot/felix.c | 3 +-
> >> drivers/net/dsa/ocelot/felix_vsc9959.c | 3 +-
> >> 6 files changed, 265 insertions(+), 8 deletions(-)
> >> create mode 100644
> >> Documentation/devicetree/bindings/net/dsa/ocelot.txt
> >>
> >> --
> >> 2.17.1
> >>
Regards,
-Vladimir