Torsten Kaiser wrote:
> So all the messages about the failing codec and MSI belong to
> 0000:01:05.2, the HDMI output.
MSI seems to be broken on all(?) Radeon IGPs; see
<http://lkml.org/lkml/2010/3/30/290>.
Torsten, what is the output of "lspci -nn" on your first system?
Regards,
Clemens
On Thu, Apr 1, 2010 at 9:26 AM, Clemens Ladisch <[email protected]> wrote:
> Torsten Kaiser wrote:
>> So all the messages about the failing codec and MSI belong to
>> 0000:01:05.2, the HDMI output.
>
> MSI seems to be broken on all(?) Radeon IGPs; see
> <http://lkml.org/lkml/2010/3/30/290>.
If you refer to "PCI quirk: RS780/RS880: work around missing MSI
initialization", the system only has a RS690.
And as far as I know, MSI works for the graphics part:
~ # grep radeon /proc/interrupts
25: 1 909 PCI-MSI-edge radeon
(I'm only using fbcon, no Xserver running)
> Torsten, what is the output of "lspci -nn" on your first system?
00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host Bridge [1002:7910]
00:01.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI
Bridge (Internal gfx) [1002:7912]
00:07.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI
Bridge (PCI Express Port 3) [1002:7917]
00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5
SATA [1002:4380]
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0)
[1002:4387]
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1)
[1002:4388]
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2)
[1002:4389]
00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3)
[1002:438a]
00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4)
[1002:438b]
00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB
Controller (EHCI) [1002:4386]
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller
[1002:4385] (rev 14)
00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c]
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel
HDA) [1002:4383]
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC
Bridge [1002:438d]
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI
Bridge [1002:4384]
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map [1022:1101]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller [1022:1102]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control [1022:1103]
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS690
[Radeon X1200 Series] [1002:791e]
01:05.2 Audio device [0403]: ATI Technologies Inc Radeon X1200 Series
Audio Controller [1002:7919]
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev
01)
03:03.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8029(AS) [10ec:8029]
03:05.0 Ethernet controller [0200]: MYSON Technology Inc SURECOM
EP-320X-S 100/10M Ethernet PCI Adapter [1516:0803]
03:06.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8
[Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev c0)
But please note: The only problem is the 6 second delay during HDMI
audio initialization. And that was not fixed by
snd_hda_intel.enable_msi=0.
As I don't have any hardware to attach to the HDMI port, I probably
can't help you debugging this further then "the delay is gone".
Thanks, Torsten