Hi,
I am having problems getting audio working on my computer:
00:1f.3 Audio device: Intel Corporation Device f1c8
I did an internet search that said that I would need 5.13 or later to
have support for this device.
openSUSE 15.3 kernel 5.3.18-59.19-default says:
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC233: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Mic=0x1a
snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
but produces no sound output.
Kernel 5.13.10 or 5.14-rc6 say:
calling azx_driver_init+0x0/0x20 @ 1
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops)
snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to polling mode: last cmd=0x200f0000
snd_hda_intel 0000:00:1f.3: No response from codec, disabling MSI: last cmd=0x200f0000
snd_hda_intel 0000:00:1f.3: Codec #2 probe error; disabling it...
snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to single_cmd mode: last cmd=0x000f0001
hdaudio hdaudioC0D0: no AFG or MFG node found
snd_hda_intel 0000:00:1f.3: no codecs initialized
and of course no sound output.
Anyone have suggestions or has a fix for this already been posted?
or maybe I am just doing something wrong?
thanks.
--
~Randy
On Fri, 20 Aug 2021 07:08:34 +0200,
Randy Dunlap wrote:
>
> Hi,
>
> I am having problems getting audio working on my computer:
>
> 00:1f.3 Audio device: Intel Corporation Device f1c8
>
> I did an internet search that said that I would need 5.13 or later to
> have support for this device.
The above is Cometlake-H, and it pretty much depends on the machine
configuration.
> openSUSE 15.3 kernel 5.3.18-59.19-default says:
>
> snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC233: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
> snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
> snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
> snd_hda_codec_realtek hdaudioC0D0: inputs:
> snd_hda_codec_realtek hdaudioC0D0: Mic=0x1a
> snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
>
> but produces no sound output.
FWIW, openSUSE Leap 15.3 kernel is based on 5.3 but got tons of
backports, hence its HD-audio part is almost equivalent with 5.13 or
later kernel (except for the recently changed mute-LED handling --
which must be irrelevant with your problem).
The above indicates that the codec is detected and set up. The rest
part is often some vendor-specific quirks. For that, details are
missing completely. At best please give alsa-info.sh output (run the
script with --no-upload and attach the output).
> Kernel 5.13.10 or 5.14-rc6 say:
>
> calling azx_driver_init+0x0/0x20 @ 1
> snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
> snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops)
> snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to polling mode: last cmd=0x200f0000
> snd_hda_intel 0000:00:1f.3: No response from codec, disabling MSI: last cmd=0x200f0000
> snd_hda_intel 0000:00:1f.3: Codec #2 probe error; disabling it...
> snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to single_cmd mode: last cmd=0x000f0001
> hdaudio hdaudioC0D0: no AFG or MFG node found
> snd_hda_intel 0000:00:1f.3: no codecs initialized
If it's the result from the more-or-less similar configuration like
the previous Leap kernel (regarding the audio), this must come from
another part than the sound driver, likely either PCI or arch/x86.
You might need to bisect for that...
thanks,
Takashi
On 8/19/21 11:44 PM, Takashi Iwai wrote:
> On Fri, 20 Aug 2021 07:08:34 +0200,
> Randy Dunlap wrote:
>>
>> Hi,
>>
>> I am having problems getting audio working on my computer:
>>
>> 00:1f.3 Audio device: Intel Corporation Device f1c8
>>
>> I did an internet search that said that I would need 5.13 or later to
>> have support for this device.
>
> The above is Cometlake-H, and it pretty much depends on the machine
> configuration.
>
>> openSUSE 15.3 kernel 5.3.18-59.19-default says:
>>
>> snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC233: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
>> snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>> snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
>> snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
>> snd_hda_codec_realtek hdaudioC0D0: inputs:
>> snd_hda_codec_realtek hdaudioC0D0: Mic=0x1a
>> snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
>>
>> but produces no sound output.
>
> FWIW, openSUSE Leap 15.3 kernel is based on 5.3 but got tons of
> backports, hence its HD-audio part is almost equivalent with 5.13 or
> later kernel (except for the recently changed mute-LED handling --
> which must be irrelevant with your problem).
>
> The above indicates that the codec is detected and set up. The rest
> part is often some vendor-specific quirks. For that, details are
> missing completely. At best please give alsa-info.sh output (run the
> script with --no-upload and attach the output).
>
Oh, of course. Now attached.
>
>> Kernel 5.13.10 or 5.14-rc6 say:
>>
>> calling azx_driver_init+0x0/0x20 @ 1
>> snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
>> snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops)
>> snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to polling mode: last cmd=0x200f0000
>> snd_hda_intel 0000:00:1f.3: No response from codec, disabling MSI: last cmd=0x200f0000
>> snd_hda_intel 0000:00:1f.3: Codec #2 probe error; disabling it...
>> snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to single_cmd mode: last cmd=0x000f0001
>> hdaudio hdaudioC0D0: no AFG or MFG node found
>> snd_hda_intel 0000:00:1f.3: no codecs initialized
>
> If it's the result from the more-or-less similar configuration like
> the previous Leap kernel (regarding the audio), this must come from
> another part than the sound driver, likely either PCI or arch/x86.
> You might need to bisect for that...
Thanks much.
--
~Randy
On Fri, 20 Aug 2021 15:54:51 +0200,
Randy Dunlap wrote:
>
> On 8/19/21 11:44 PM, Takashi Iwai wrote:
> > On Fri, 20 Aug 2021 07:08:34 +0200,
> > Randy Dunlap wrote:
> >>
> >> Hi,
> >>
> >> I am having problems getting audio working on my computer:
> >>
> >> 00:1f.3 Audio device: Intel Corporation Device f1c8
> >>
> >> I did an internet search that said that I would need 5.13 or later to
> >> have support for this device.
> >
> > The above is Cometlake-H, and it pretty much depends on the machine
> > configuration.
> >
> >> openSUSE 15.3 kernel 5.3.18-59.19-default says:
> >>
> >> snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC233: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
> >> snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> >> snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
> >> snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
> >> snd_hda_codec_realtek hdaudioC0D0: inputs:
> >> snd_hda_codec_realtek hdaudioC0D0: Mic=0x1a
> >> snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
> >>
> >> but produces no sound output.
> >
> > FWIW, openSUSE Leap 15.3 kernel is based on 5.3 but got tons of
> > backports, hence its HD-audio part is almost equivalent with 5.13 or
> > later kernel (except for the recently changed mute-LED handling --
> > which must be irrelevant with your problem).
> >
> > The above indicates that the codec is detected and set up. The rest
> > part is often some vendor-specific quirks. For that, details are
> > missing completely. At best please give alsa-info.sh output (run the
> > script with --no-upload and attach the output).
> >
>
> Oh, of course. Now attached.
I see that the Headphone mixer switch is off by some reason.
But it should have been toggled by PulseAudio.
You can test like:
amixer -c0 set "Headphone" unmute
Also, just to be sure: did you install both pulseaudio and pipewire?
They may conflict.
Takashi
On 8/20/21 7:11 AM, Takashi Iwai wrote:
> On Fri, 20 Aug 2021 15:54:51 +0200,
> Randy Dunlap wrote:
>>
>> On 8/19/21 11:44 PM, Takashi Iwai wrote:
>>> On Fri, 20 Aug 2021 07:08:34 +0200,
>>> Randy Dunlap wrote:
>>>>
>>>> Hi,
>>>>
>>>> I am having problems getting audio working on my computer:
>>>>
>>>> 00:1f.3 Audio device: Intel Corporation Device f1c8
>>>>
>>>> I did an internet search that said that I would need 5.13 or later to
>>>> have support for this device.
>>>
>>> The above is Cometlake-H, and it pretty much depends on the machine
>>> configuration.
>>>
>>>> openSUSE 15.3 kernel 5.3.18-59.19-default says:
>>>>
>>>> snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC233: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
>>>> snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>>>> snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
>>>> snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
>>>> snd_hda_codec_realtek hdaudioC0D0: inputs:
>>>> snd_hda_codec_realtek hdaudioC0D0: Mic=0x1a
>>>> snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
>>>>
>>>> but produces no sound output.
>>>
>>> FWIW, openSUSE Leap 15.3 kernel is based on 5.3 but got tons of
>>> backports, hence its HD-audio part is almost equivalent with 5.13 or
>>> later kernel (except for the recently changed mute-LED handling --
>>> which must be irrelevant with your problem).
>>>
>>> The above indicates that the codec is detected and set up. The rest
>>> part is often some vendor-specific quirks. For that, details are
>>> missing completely. At best please give alsa-info.sh output (run the
>>> script with --no-upload and attach the output).
>>>
>>
>> Oh, of course. Now attached.
>
> I see that the Headphone mixer switch is off by some reason.
> But it should have been toggled by PulseAudio.
>
> You can test like:
> amixer -c0 set "Headphone" unmute
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 87
Mono:
Front Left: Playback 87 [100%] [0.00dB] [on]
Front Right: Playback 87 [100%] [0.00dB] [on]
> Also, just to be sure: did you install both pulseaudio and pipewire?
> They may conflict.
Yes. pipewire is now gone.
Still no sound but I might need to restart...
Thanks!
--
~Randy
On 8/20/21 7:43 AM, Randy Dunlap wrote:
> On 8/20/21 7:11 AM, Takashi Iwai wrote:
>> On Fri, 20 Aug 2021 15:54:51 +0200,
>> Randy Dunlap wrote:
>>>
>>> On 8/19/21 11:44 PM, Takashi Iwai wrote:
>>>> On Fri, 20 Aug 2021 07:08:34 +0200,
>>>> Randy Dunlap wrote:
>>>>>
>>>>> Hi,
>>>>>
>>>>> I am having problems getting audio working on my computer:
>>>>>
>>>>> 00:1f.3 Audio device: Intel Corporation Device f1c8
>>>>>
>>>>> I did an internet search that said that I would need 5.13 or later to
>>>>> have support for this device.
>>>>
>>>> The above is Cometlake-H, and it pretty much depends on the machine
>>>> configuration.
>>>>
>>>>> openSUSE 15.3 kernel 5.3.18-59.19-default says:
>>>>>
>>>>> snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC233: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
>>>>> snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>>>>> snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
>>>>> snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
>>>>> snd_hda_codec_realtek hdaudioC0D0: inputs:
>>>>> snd_hda_codec_realtek hdaudioC0D0: Mic=0x1a
>>>>> snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
>>>>>
>>>>> but produces no sound output.
>>>>
>>>> FWIW, openSUSE Leap 15.3 kernel is based on 5.3 but got tons of
>>>> backports, hence its HD-audio part is almost equivalent with 5.13 or
>>>> later kernel (except for the recently changed mute-LED handling --
>>>> which must be irrelevant with your problem).
>>>>
>>>> The above indicates that the codec is detected and set up. The rest
>>>> part is often some vendor-specific quirks. For that, details are
>>>> missing completely. At best please give alsa-info.sh output (run the
>>>> script with --no-upload and attach the output).
>>>>
>>>
>>> Oh, of course. Now attached.
>>
>> I see that the Headphone mixer switch is off by some reason.
>> But it should have been toggled by PulseAudio.
>>
>> You can test like:
>> amixer -c0 set "Headphone" unmute
>
> Simple mixer control 'Headphone',0
> Capabilities: pvolume pswitch
> Playback channels: Front Left - Front Right
> Limits: Playback 0 - 87
> Mono:
> Front Left: Playback 87 [100%] [0.00dB] [on]
> Front Right: Playback 87 [100%] [0.00dB] [on]
>
>
>> Also, just to be sure: did you install both pulseaudio and pipewire?
>> They may conflict.
>
> Yes. pipewire is now gone.
>
> Still no sound but I might need to restart...
Rebooting didn't help any. I didn't know what to try next,
so I did the easy thing: use Yast Sound to delete the device
configuration and then reconfigure it.
Fortunately that fixed it and the sound device is now working.
I had not use Yast Sound to configure the device. Maybe
pipewire did that automatically? although I never ran
pipewire.
Anyway, it is all good now. Thanks for your help.
--
~Randy