This will eliminate the need for apic_probe[], as the probing now will
happen based on the apic drivers order in the .apcidrivers section.
Signed-off-by: Suresh Siddha <[email protected]>
---
arch/x86/kernel/apic/probe_32.c | 39 ++++++++++++++++++++-------------------
arch/x86/kernel/apic/probe_64.c | 28 ++++++++++++++++------------
2 files changed, 36 insertions(+), 31 deletions(-)
Index: linux-2.6-tip/arch/x86/kernel/apic/probe_64.c
===================================================================
--- linux-2.6-tip.orig/arch/x86/kernel/apic/probe_64.c
+++ linux-2.6-tip/arch/x86/kernel/apic/probe_64.c
@@ -54,19 +54,21 @@ static int apicid_phys_pkg_id(int initia
*/
void __init default_setup_apic_routing(void)
{
- int i;
+ struct apic **drv;
enable_IR_x2apic();
- for (i = 0; apic_probe[i]; ++i) {
- if (apic_probe[i]->probe()) {
- apic = apic_probe[i];
+ for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) {
+ if ((*drv)->probe && (*drv)->probe()) {
+ if (apic != *drv) {
+ apic = *drv;
+ pr_info("Switched APIC routing to %s.\n",
+ apic->name);
+ }
break;
}
}
- printk(KERN_INFO "APIC routing finalized to %s.\n", apic->name);
-
if (is_vsmp_box()) {
/* need to update phys_pkg_id */
apic->phys_pkg_id = apicid_phys_pkg_id;
@@ -82,13 +84,15 @@ void apic_send_IPI_self(int vector)
int __init default_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
- int i;
+ struct apic **drv;
- for (i = 0; apic_probe[i]; ++i) {
- if (apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id)) {
- apic = apic_probe[i];
- printk(KERN_INFO "Setting APIC routing to %s.\n",
- apic->name);
+ for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) {
+ if ((*drv)->acpi_madt_oem_check(oem_id, oem_table_id)) {
+ if (apic != *drv) {
+ apic = *drv;
+ pr_info("Setting APIC routing to %s.\n",
+ apic->name);
+ }
return 1;
}
}
Index: linux-2.6-tip/arch/x86/kernel/apic/probe_32.c
===================================================================
--- linux-2.6-tip.orig/arch/x86/kernel/apic/probe_32.c
+++ linux-2.6-tip/arch/x86/kernel/apic/probe_32.c
@@ -206,14 +206,14 @@ static struct apic *apic_probe[] __initd
static int cmdline_apic __initdata;
static int __init parse_apic(char *arg)
{
- int i;
+ struct apic **drv;
if (!arg)
return -EINVAL;
- for (i = 0; apic_probe[i]; i++) {
- if (!strcmp(apic_probe[i]->name, arg)) {
- apic = apic_probe[i];
+ for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) {
+ if (!strcmp((*drv)->name, arg)) {
+ apic = *drv;
cmdline_apic = 1;
return 0;
}
@@ -247,15 +247,16 @@ void __init generic_bigsmp_probe(void)
void __init generic_apic_probe(void)
{
if (!cmdline_apic) {
- int i;
- for (i = 0; apic_probe[i]; i++) {
- if (apic_probe[i]->probe()) {
- apic = apic_probe[i];
+ struct apic **drv;
+
+ for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) {
+ if ((*drv)->probe()) {
+ apic = *drv;
break;
}
}
/* Not visible without early console */
- if (!apic_probe[i])
+ if (drv == __apicdrivers_end)
panic("Didn't find an APIC driver");
}
printk(KERN_INFO "Using APIC driver %s\n", apic->name);
@@ -266,16 +267,16 @@ void __init generic_apic_probe(void)
int __init
generic_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
{
- int i;
+ struct apic **drv;
- for (i = 0; apic_probe[i]; ++i) {
- if (!apic_probe[i]->mps_oem_check)
+ for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) {
+ if (!((*drv)->mps_oem_check))
continue;
- if (!apic_probe[i]->mps_oem_check(mpc, oem, productid))
+ if (!(*drv)->mps_oem_check(mpc, oem, productid))
continue;
if (!cmdline_apic) {
- apic = apic_probe[i];
+ apic = *drv;
printk(KERN_INFO "Switched to APIC driver `%s'.\n",
apic->name);
}
@@ -286,16 +287,16 @@ generic_mps_oem_check(struct mpc_table *
int __init default_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
- int i;
+ struct apic **drv;
- for (i = 0; apic_probe[i]; ++i) {
- if (!apic_probe[i]->acpi_madt_oem_check)
+ for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) {
+ if (!(*drv)->acpi_madt_oem_check)
continue;
- if (!apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id))
+ if (!(*drv)->acpi_madt_oem_check(oem_id, oem_table_id))
continue;
if (!cmdline_apic) {
- apic = apic_probe[i];
+ apic = *drv;
printk(KERN_INFO "Switched to APIC driver `%s'.\n",
apic->name);
}
Commit-ID: 8b37e88061e229e78959fe3257649fd5ce05f8af
Gitweb: http://git.kernel.org/tip/8b37e88061e229e78959fe3257649fd5ce05f8af
Author: Suresh Siddha <[email protected]>
AuthorDate: Fri, 20 May 2011 17:51:18 -0700
Committer: Ingo Molnar <[email protected]>
CommitDate: Sun, 22 May 2011 11:48:03 +0200
x86, apic: Use .apicdrivers section for the apic drivers list
This will eliminate the need for apic_probe[], as the probing
now will happen based on the apic drivers order in the
.apcidrivers section.
Signed-off-by: Suresh Siddha <[email protected]>
Tested-by: Cyrill Gorcunov <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
---
arch/x86/kernel/apic/probe_32.c | 39 ++++++++++++++++++++-------------------
arch/x86/kernel/apic/probe_64.c | 28 ++++++++++++++++------------
2 files changed, 36 insertions(+), 31 deletions(-)
diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c
index a319b33..8796e1d 100644
--- a/arch/x86/kernel/apic/probe_32.c
+++ b/arch/x86/kernel/apic/probe_32.c
@@ -206,14 +206,14 @@ static struct apic *apic_probe[] __initdata = {
static int cmdline_apic __initdata;
static int __init parse_apic(char *arg)
{
- int i;
+ struct apic **drv;
if (!arg)
return -EINVAL;
- for (i = 0; apic_probe[i]; i++) {
- if (!strcmp(apic_probe[i]->name, arg)) {
- apic = apic_probe[i];
+ for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) {
+ if (!strcmp((*drv)->name, arg)) {
+ apic = *drv;
cmdline_apic = 1;
return 0;
}
@@ -247,15 +247,16 @@ void __init generic_bigsmp_probe(void)
void __init generic_apic_probe(void)
{
if (!cmdline_apic) {
- int i;
- for (i = 0; apic_probe[i]; i++) {
- if (apic_probe[i]->probe()) {
- apic = apic_probe[i];
+ struct apic **drv;
+
+ for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) {
+ if ((*drv)->probe()) {
+ apic = *drv;
break;
}
}
/* Not visible without early console */
- if (!apic_probe[i])
+ if (drv == __apicdrivers_end)
panic("Didn't find an APIC driver");
}
printk(KERN_INFO "Using APIC driver %s\n", apic->name);
@@ -266,16 +267,16 @@ void __init generic_apic_probe(void)
int __init
generic_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
{
- int i;
+ struct apic **drv;
- for (i = 0; apic_probe[i]; ++i) {
- if (!apic_probe[i]->mps_oem_check)
+ for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) {
+ if (!((*drv)->mps_oem_check))
continue;
- if (!apic_probe[i]->mps_oem_check(mpc, oem, productid))
+ if (!(*drv)->mps_oem_check(mpc, oem, productid))
continue;
if (!cmdline_apic) {
- apic = apic_probe[i];
+ apic = *drv;
printk(KERN_INFO "Switched to APIC driver `%s'.\n",
apic->name);
}
@@ -286,16 +287,16 @@ generic_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
int __init default_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
- int i;
+ struct apic **drv;
- for (i = 0; apic_probe[i]; ++i) {
- if (!apic_probe[i]->acpi_madt_oem_check)
+ for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) {
+ if (!(*drv)->acpi_madt_oem_check)
continue;
- if (!apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id))
+ if (!(*drv)->acpi_madt_oem_check(oem_id, oem_table_id))
continue;
if (!cmdline_apic) {
- apic = apic_probe[i];
+ apic = *drv;
printk(KERN_INFO "Switched to APIC driver `%s'.\n",
apic->name);
}
diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c
index 39fb42b..e2c361d 100644
--- a/arch/x86/kernel/apic/probe_64.c
+++ b/arch/x86/kernel/apic/probe_64.c
@@ -54,19 +54,21 @@ static int apicid_phys_pkg_id(int initial_apic_id, int index_msb)
*/
void __init default_setup_apic_routing(void)
{
- int i;
+ struct apic **drv;
enable_IR_x2apic();
- for (i = 0; apic_probe[i]; ++i) {
- if (apic_probe[i]->probe()) {
- apic = apic_probe[i];
+ for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) {
+ if ((*drv)->probe && (*drv)->probe()) {
+ if (apic != *drv) {
+ apic = *drv;
+ pr_info("Switched APIC routing to %s.\n",
+ apic->name);
+ }
break;
}
}
- printk(KERN_INFO "APIC routing finalized to %s.\n", apic->name);
-
if (is_vsmp_box()) {
/* need to update phys_pkg_id */
apic->phys_pkg_id = apicid_phys_pkg_id;
@@ -82,13 +84,15 @@ void apic_send_IPI_self(int vector)
int __init default_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
- int i;
+ struct apic **drv;
- for (i = 0; apic_probe[i]; ++i) {
- if (apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id)) {
- apic = apic_probe[i];
- printk(KERN_INFO "Setting APIC routing to %s.\n",
- apic->name);
+ for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) {
+ if ((*drv)->acpi_madt_oem_check(oem_id, oem_table_id)) {
+ if (apic != *drv) {
+ apic = *drv;
+ pr_info("Setting APIC routing to %s.\n",
+ apic->name);
+ }
return 1;
}
}