Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754358Ab2KENsv (ORCPT ); Mon, 5 Nov 2012 08:48:51 -0500 Received: from atlantis.wh2.tu-dresden.de ([141.30.228.39]:49643 "EHLO atlantis.wh2.tu-dresden.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932414Ab2KENss (ORCPT ); Mon, 5 Nov 2012 08:48:48 -0500 From: Lars Poeschel To: linus.walleij@linaro.org Cc: poeschel@lemonage.de, sameo@linux.intel.com, linux-kernel@vger.kernel.org, jic23@cam.ac.uk, khali@linux-fr.org, ben-linux@fluff.org, w.sang@pengutronix.de, grant.likely@secretlab.ca, linux-iio@vger.kernel.org Subject: [PATCH v3 5/5] iio: adc: add viperboard adc driver Date: Mon, 5 Nov 2012 15:48:26 +0100 Message-Id: <1352126906-4560-5-git-send-email-larsi@wh2.tu-dresden.de> X-Mailer: git-send-email 1.7.10.4 In-Reply-To: <1352126906-4560-1-git-send-email-larsi@wh2.tu-dresden.de> References: <1352126906-4560-1-git-send-email-larsi@wh2.tu-dresden.de> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 7073 Lines: 261 From: Lars Poeschel This adds the mfd cell to use the adc part of the Nano River Technologies viperboard. Signed-off-by: Lars Poeschel --- drivers/iio/adc/Kconfig | 7 ++ drivers/iio/adc/Makefile | 1 + drivers/iio/adc/viperboard_adc.c | 181 ++++++++++++++++++++++++++++++++++++++ drivers/mfd/viperboard.c | 3 + include/linux/mfd/viperboard.h | 1 + 5 files changed, 193 insertions(+) create mode 100644 drivers/iio/adc/viperboard_adc.c diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 4927581..35ad77d 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -60,4 +60,11 @@ config LP8788_ADC help Say yes here to build support for TI LP8788 ADC. +config VIPERBOARD_ADC + tristate "Viperboard ADC support" + depends on MFD_VIPERBOARD && USB + help + Say yes here to access the ADC part of the Nano River + Technologies Viperboard. + endmenu diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index 900995d..4852c2e 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -8,3 +8,4 @@ obj-$(CONFIG_AD7476) += ad7476.o obj-$(CONFIG_AD7791) += ad7791.o obj-$(CONFIG_AT91_ADC) += at91_adc.o obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o +obj-$(CONFIG_VIPERBOARD_ADC) += viperboard_adc.o diff --git a/drivers/iio/adc/viperboard_adc.c b/drivers/iio/adc/viperboard_adc.c new file mode 100644 index 0000000..58345c7 --- /dev/null +++ b/drivers/iio/adc/viperboard_adc.c @@ -0,0 +1,181 @@ +/* + * Nano River Technologies viperboard iio ADC driver + * + * (C) 2012 by Lemonage GmbH + * Author: Lars Poeschel + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +#define VPRBRD_ADC_CMD_GET 0x00 + +struct vprbrd_adc_msg { + u8 cmd; + u8 chan; + u8 val; +} __packed; + +struct vprbrd_adc { + struct vprbrd *vb; +}; + +#define VPRBRD_ADC_CHANNEL(_index) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = _index, \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, \ + .scan_index = _index, \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 8, \ + .storagebits = 8, \ + }, \ +} + +static struct iio_chan_spec const vprbrd_adc_iio_channels[] = { + VPRBRD_ADC_CHANNEL(0), + VPRBRD_ADC_CHANNEL(1), + VPRBRD_ADC_CHANNEL(2), + VPRBRD_ADC_CHANNEL(3), +}; + +static int vprbrd_iio_read_raw(struct iio_dev *iio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long info) +{ + int ret, error = 0; + struct vprbrd_adc *adc = iio_priv(iio_dev); + struct vprbrd *vb = adc->vb; + struct vprbrd_adc_msg *admsg = (struct vprbrd_adc_msg *)vb->buf; + + switch (info) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&vb->lock); + + admsg->cmd = VPRBRD_ADC_CMD_GET; + admsg->chan = chan->scan_index; + admsg->val = 0x00; + + ret = usb_control_msg(vb->usb_dev, + usb_sndctrlpipe(vb->usb_dev, 0), VPRBRD_USB_REQUEST_ADC, + VPRBRD_USB_TYPE_OUT, 0x0000, 0x0000, admsg, + sizeof(struct vprbrd_adc_msg), VPRBRD_USB_TIMEOUT_MS); + if (ret != sizeof(struct vprbrd_adc_msg)) { + dev_err(&iio_dev->dev, "usb send error on adc read\n"); + error = -EREMOTEIO; + } + + ret = usb_control_msg(vb->usb_dev, + usb_rcvctrlpipe(vb->usb_dev, 0), VPRBRD_USB_REQUEST_ADC, + VPRBRD_USB_TYPE_IN, 0x0000, 0x0000, admsg, + sizeof(struct vprbrd_adc_msg), VPRBRD_USB_TIMEOUT_MS); + + *val = admsg->val; + + mutex_unlock(&vb->lock); + + if (ret != sizeof(struct vprbrd_adc_msg)) { + dev_err(&iio_dev->dev, "usb recv error on adc read\n"); + error = -EREMOTEIO; + } + + if (error) + goto error; + + return IIO_VAL_INT; + default: + error = -EINVAL; + break; + } +error: + return error; +} + +static const struct iio_info vprbrd_adc_iio_info = { + .read_raw = &vprbrd_iio_read_raw, + .driver_module = THIS_MODULE, +}; + +static int __devinit vprbrd_adc_probe(struct platform_device *pdev) +{ + struct vprbrd *vb = dev_get_drvdata(pdev->dev.parent); + struct vprbrd_adc *adc; + struct iio_dev *indio_dev; + int ret; + + /* registering iio */ + indio_dev = iio_device_alloc(sizeof(struct vprbrd_adc)); + if (!indio_dev) { + dev_err(&pdev->dev, "failed allocating iio device\n"); + return -ENOMEM; + } + + adc = iio_priv(indio_dev); + adc->vb = vb; + indio_dev->name = "viperboard adc"; + indio_dev->dev.parent = &pdev->dev; + indio_dev->info = &vprbrd_adc_iio_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = vprbrd_adc_iio_channels; + indio_dev->num_channels = ARRAY_SIZE(vprbrd_adc_iio_channels); + + ret = iio_device_register(indio_dev); + if (ret) { + dev_err(&pdev->dev, "could not register iio (adc)"); + goto error; + } + + platform_set_drvdata(pdev, indio_dev); + + return 0; + +error: + iio_device_free(indio_dev); + return ret; +} + +static int __devexit vprbrd_adc_remove(struct platform_device *pdev) +{ + struct iio_dev *indio_dev = platform_get_drvdata(pdev); + + iio_device_unregister(indio_dev); + iio_device_free(indio_dev); + + return 0; +} + +static struct platform_driver vprbrd_adc_driver = { + .driver = { + .name = "viperboard-adc", + .owner = THIS_MODULE, + }, + .probe = vprbrd_adc_probe, + .remove = __devexit_p(vprbrd_adc_remove), +}; + +module_platform_driver(vprbrd_adc_driver); + +MODULE_AUTHOR("Lars Poeschel "); +MODULE_DESCRIPTION("IIO ADC driver for Nano River Techs Viperboard"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:viperboard-adc"); diff --git a/drivers/mfd/viperboard.c b/drivers/mfd/viperboard.c index a7b5b34..dacb3b7 100644 --- a/drivers/mfd/viperboard.c +++ b/drivers/mfd/viperboard.c @@ -44,6 +44,9 @@ static struct mfd_cell vprbrd_devs[] = { { .name = "viperboard-i2c", }, + { + .name = "viperboard-adc", + }, }; static int vprbrd_probe(struct usb_interface *interface, diff --git a/include/linux/mfd/viperboard.h b/include/linux/mfd/viperboard.h index ef78514..1934528 100644 --- a/include/linux/mfd/viperboard.h +++ b/include/linux/mfd/viperboard.h @@ -46,6 +46,7 @@ #define VPRBRD_USB_REQUEST_I2C 0xe9 #define VPRBRD_USB_REQUEST_MAJOR 0xea #define VPRBRD_USB_REQUEST_MINOR 0xeb +#define VPRBRD_USB_REQUEST_ADC 0xec #define VPRBRD_USB_REQUEST_GPIOA 0xed #define VPRBRD_USB_REQUEST_GPIOB 0xdd -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/