Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754485Ab2KGJ5l (ORCPT ); Wed, 7 Nov 2012 04:57:41 -0500 Received: from alvesta.synopsys.com ([198.182.60.77]:40386 "EHLO alvesta.synopsys.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754220Ab2KGJ5f (ORCPT ); Wed, 7 Nov 2012 04:57:35 -0500 From: Vineet Gupta To: linux-arch@vger.kernel.org, linux-kernel@vger.kernel.org Cc: tglx@linutronix.de, arnd@arndb.de, Vineet Gupta Subject: [RFC PATCH v1 20/31] ARC: MMU Exception Handling Date: Wed, 7 Nov 2012 10:47:43 +0100 Message-Id: <1352281674-2186-21-git-send-email-vgupta@synopsys.com> X-Mailer: git-send-email 1.7.0.4 In-Reply-To: <1352281674-2186-1-git-send-email-vgupta@synopsys.com> References: <1352281674-2186-1-git-send-email-vgupta@synopsys.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 29555 Lines: 934 * MMU I-TLB / D-TLB Miss Exceptions - Fast Path TLB Refill Handler - slowpath TLB creation via do_page_fault() -> update_mmu_cache() * Duplicate PD Exception Handler Signed-off-by: Vineet Gupta --- arch/arc/include/asm/arcregs.h | 90 ++++++++++ arch/arc/include/asm/tlb-mmu1.h | 104 ++++++++++++ arch/arc/include/asm/tlb.h | 41 +++++ arch/arc/mm/tlb.c | 252 ++++++++++++++++++++++++++++ arch/arc/mm/tlbex.S | 351 +++++++++++++++++++++++++++++++++++++++ 5 files changed, 838 insertions(+), 0 deletions(-) create mode 100644 arch/arc/include/asm/tlb-mmu1.h create mode 100644 arch/arc/include/asm/tlb.h create mode 100644 arch/arc/mm/tlbex.S diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h index c12eb9b..aedfbf1 100644 --- a/arch/arc/include/asm/arcregs.h +++ b/arch/arc/include/asm/arcregs.h @@ -13,6 +13,7 @@ /* Build Configuration Registers */ #define ARC_REG_VECBASE_BCR 0x68 +#define ARC_REG_MMU_BCR 0x6f /* status32 Bits Positions */ #define STATUS_H_BIT 0 /* CPU Halted */ @@ -36,6 +37,34 @@ #define STATUS_U_MASK (1<= 2) +#define TLBWriteNI 0x5 /* write JTLB without inv uTLBs */ +#define TLBIVUTLB 0x6 /* explicitly inv uTLBs */ +#else +#undef TLBWriteNI /* These cmds don't exist on older MMU */ +#undef TLBIVUTLB +#endif + /* Instruction cache related Auxiliary registers */ #define ARC_REG_IC_BCR 0x77 /* Build Config reg */ #define ARC_REG_IC_IVIC 0x10 @@ -205,6 +272,24 @@ struct arc_fpu { * Build Configuration Registers, with encoded hardware config */ +struct bcr_mmu_1_2 { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int ver:8, ways:4, sets:4, u_itlb:8, u_dtlb:8; +#else + unsigned int u_dtlb:8, u_itlb:8, sets:4, ways:4, ver:8; +#endif +}; + +struct bcr_mmu_3 { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int ver:8, ways:4, sets:4, osm:1, reserv:3, pg_sz:4, + u_itlb:4, u_dtlb:4; +#else + unsigned int u_dtlb:4, u_itlb:4, pg_sz:4, reserv:3, osm:1, sets:4, + ways:4, ver:8; +#endif +}; + struct bcr_cache { #ifdef CONFIG_CPU_BIG_ENDIAN unsigned int pad:12, line_len:4, sz:4, config:4, ver:8; @@ -218,12 +303,17 @@ struct bcr_cache { * Generic structures to hold build configuration used at runtime */ +struct cpuinfo_arc_mmu { + unsigned int ver, pg_sz, sets, ways, u_dtlb, u_itlb, num_tlb; +}; + struct cpuinfo_arc_cache { unsigned int has_aliasing, sz, line_len, assoc, ver; }; struct cpuinfo_arc { struct cpuinfo_arc_cache icache, dcache; + struct cpuinfo_arc_mmu mmu; }; extern struct cpuinfo_arc cpuinfo_arc700[]; diff --git a/arch/arc/include/asm/tlb-mmu1.h b/arch/arc/include/asm/tlb-mmu1.h new file mode 100644 index 0000000..a5ff961 --- /dev/null +++ b/arch/arc/include/asm/tlb-mmu1.h @@ -0,0 +1,104 @@ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_TLB_MMU_V1_H__ +#define __ASM_TLB_MMU_V1_H__ + +#if defined(__ASSEMBLY__) && defined(CONFIG_ARC_MMU_VER == 1) + +#include + +.macro TLB_WRITE_HEURISTICS + +#define JH_HACK1 +#undef JH_HACK2 +#undef JH_HACK3 + +#ifdef JH_HACK3 +; Calculate set index for 2-way MMU +; -avoiding use of GetIndex from MMU +; and its unpleasant LFSR pseudo-random sequence +; +; r1 = TLBPD0 from TLB_RELOAD above +; +; -- jh_ex_way_set not cleared on startup +; didn't want to change setup.c +; hence extra instruction to clean +; +; -- should be in cache since in same line +; as r0/r1 saves above +; +ld r0,[jh_ex_way_sel] ; victim pointer +and r0,r0,1 ; clean +xor.f r0,r0,1 ; flip +st r0,[jh_ex_way_sel] ; store back +asr r0,r1,12 ; get set # <<1, note bit 12=R=0 +or.nz r0,r0,1 ; set way bit +and r0,r0,0xff ; clean +sr r0,[ARC_REG_TLBINDEX] +#endif + +#ifdef JH_HACK2 +; JH hack #2 +; Faster than hack #1 in non-thrash case, but hard-coded for 2-way MMU +; Slower in thrash case (where it matters) because more code is executed +; Inefficient due to two-register paradigm of this miss handler +; +/* r1 = data TLBPD0 at this point */ +lr r0,[eret] /* instruction address */ +xor r0,r0,r1 /* compare set # */ +and.f r0,r0,0x000fe000 /* 2-way MMU mask */ +bne 88f /* not in same set - no need to probe */ + +lr r0,[eret] /* instruction address */ +and r0,r0,PAGE_MASK /* VPN of instruction address */ +; lr r1,[ARC_REG_TLBPD0] /* Data VPN+ASID - already in r1 from TLB_RELOAD*/ +and r1,r1,0xff /* Data ASID */ +or r0,r0,r1 /* Instruction address + Data ASID */ + +lr r1,[ARC_REG_TLBPD0] /* save TLBPD0 containing data TLB*/ +sr r0,[ARC_REG_TLBPD0] /* write instruction address to TLBPD0 */ +sr TLBProbe, [ARC_REG_TLBCOMMAND] /* Look for instruction */ +lr r0,[ARC_REG_TLBINDEX] /* r0 = index where instruction is, if at all */ +sr r1,[ARC_REG_TLBPD0] /* restore TLBPD0 */ + +xor r0,r0,1 /* flip bottom bit of data index */ +b.d 89f +sr r0,[ARC_REG_TLBINDEX] /* and put it back */ +88: +sr TLBGetIndex, [ARC_REG_TLBCOMMAND] +89: +#endif + +#ifdef JH_HACK1 +; +; Always checks whether instruction will be kicked out by dtlb miss +; +mov_s r3, r1 ; save PD0 prepared by TLB_RELOAD in r3 +lr r0,[eret] /* instruction address */ +and r0,r0,PAGE_MASK /* VPN of instruction address */ +bmsk r1,r3,7 /* Data ASID, bits 7-0 */ +or_s r0,r0,r1 /* Instruction address + Data ASID */ + +sr r0,[ARC_REG_TLBPD0] /* write instruction address to TLBPD0 */ +sr TLBProbe, [ARC_REG_TLBCOMMAND] /* Look for instruction */ +lr r0,[ARC_REG_TLBINDEX] /* r0 = index where instruction is, if at all */ +sr r3,[ARC_REG_TLBPD0] /* restore TLBPD0 */ + +sr TLBGetIndex, [ARC_REG_TLBCOMMAND] +lr r1,[ARC_REG_TLBINDEX] /* r1 = index where MMU wants to put data */ +cmp r0,r1 /* if no match on indices, go around */ +xor.eq r1,r1,1 /* flip bottom bit of data index */ +sr r1,[ARC_REG_TLBINDEX] /* and put it back */ +#endif + +.endm + +#endif + +#endif diff --git a/arch/arc/include/asm/tlb.h b/arch/arc/include/asm/tlb.h new file mode 100644 index 0000000..b571e12 --- /dev/null +++ b/arch/arc/include/asm/tlb.h @@ -0,0 +1,41 @@ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _ASM_ARC_TLB_H +#define _ASM_ARC_TLB_H + +#ifdef __KERNEL__ + +#include + +/* Masks for actual TLB "PD"s */ +#define PTE_BITS_IN_PD0 (_PAGE_GLOBAL | _PAGE_PRESENT) +#define PTE_BITS_IN_PD1 (PAGE_MASK | _PAGE_CACHEABLE | \ + _PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ | \ + _PAGE_K_EXECUTE | _PAGE_K_WRITE | _PAGE_K_READ) + +#ifndef __ASSEMBLY__ + +#include +#include + +#ifdef CONFIG_ARC_DBG_TLB_PARANOIA +void tlb_paranoid_check(unsigned int pid_sw, unsigned long address); +#else +#define tlb_paranoid_check(a, b) +#endif + +void arc_mmu_init(void); +extern char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len); +void __init read_decode_mmu_bcr(void); + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* _ASM_ARC_TLB_H */ diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c index f1edae2..41afc84 100644 --- a/arch/arc/mm/tlb.c +++ b/arch/arc/mm/tlb.c @@ -21,3 +21,255 @@ int asid_cache = FIRST_ASID; * see get_new_mmu_context (asm-arc/mmu_context.h) */ struct mm_struct *asid_mm_map[NUM_ASID + 1]; + + +/* + * Routine to create a TLB entry + */ +void create_tlb(struct vm_area_struct *vma, unsigned long address, pte_t *ptep) +{ + unsigned long flags; + unsigned int idx, asid_or_sasid; + unsigned long pd0_flags; + + local_irq_save(flags); + + tlb_paranoid_check(vma->vm_mm->context.asid, address); + + address &= PAGE_MASK; + + /* update this PTE credentials */ + pte_val(*ptep) |= (_PAGE_PRESENT | _PAGE_ACCESSED); + + /* Create HW TLB entry Flags (in PD0) from PTE Flags */ +#if (CONFIG_ARC_MMU_VER <= 2) + pd0_flags = ((pte_val(*ptep) & PTE_BITS_IN_PD0) >> 1); +#else + pd0_flags = ((pte_val(*ptep) & PTE_BITS_IN_PD0)); +#endif + + /* ASID for this task */ + asid_or_sasid = read_aux_reg(ARC_REG_PID) & 0xff; + + write_aux_reg(ARC_REG_TLBPD0, address | pd0_flags | asid_or_sasid); + + /* Load remaining info in PD1 (Page Frame Addr and Kx/Kw/Kr Flags) */ + write_aux_reg(ARC_REG_TLBPD1, (pte_val(*ptep) & PTE_BITS_IN_PD1)); + + /* First verify if entry for this vaddr+ASID already exists */ + write_aux_reg(ARC_REG_TLBCOMMAND, TLBProbe); + idx = read_aux_reg(ARC_REG_TLBINDEX); + + /* + * If Not already present get a free slot from MMU. + * Otherwise, Probe would have located the entry and set INDEX Reg + * with existing location. This will cause Write CMD to over-write + * existing entry with new PD0 and PD1 + */ + if (likely(idx & TLB_LKUP_ERR)) + write_aux_reg(ARC_REG_TLBCOMMAND, TLBGetIndex); + + /* + * Commit the Entry to MMU + * It doesnt sound safe to use the TLBWriteNI cmd here + * which doesn't flush uTLBs. I'd rather be safe than sorry. + */ + write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite); + + local_irq_restore(flags); +} + +/* arch hook called by core VM at the end of handle_mm_fault( ), + * when a new PTE is entered in Page Tables or an existing one + * is modified. We aggresively pre-install a TLB entry + */ + +void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddress, + pte_t *ptep) +{ + /* XXX: This definitely seems useless */ +#if 0 + BUG_ON(!pfn_valid(pte_pfn(*ptep))); +#endif + + /* XXX: This is useful - but only once during execve - check why? + * handle_mm_fault() + * __get_user_pages + * copy_strings() + * do_execve() + */ + if (current->active_mm != vma->vm_mm) + return; + + create_tlb(vma, vaddress, ptep); +} + +/* Read the Cache Build Confuration Registers, Decode them and save into + * the cpuinfo structure for later use. + * No Validation is done here, simply read/convert the BCRs + */ +void __init read_decode_mmu_bcr(void) +{ + unsigned int tmp; + struct bcr_mmu_1_2 *mmu2; /* encoded MMU2 attr */ + struct bcr_mmu_3 *mmu3; /* encoded MMU3 attr */ + struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu; + + tmp = read_aux_reg(ARC_REG_MMU_BCR); + mmu->ver = (tmp >> 24); + + if (mmu->ver <= 2) { + mmu2 = (struct bcr_mmu_1_2 *)&tmp; + mmu->pg_sz = PAGE_SIZE; + mmu->sets = 1 << mmu2->sets; + mmu->ways = 1 << mmu2->ways; + mmu->u_dtlb = mmu2->u_dtlb; + mmu->u_itlb = mmu2->u_itlb; + } else { + mmu3 = (struct bcr_mmu_3 *)&tmp; + mmu->pg_sz = 512 << mmu3->pg_sz; + mmu->sets = 1 << mmu3->sets; + mmu->ways = 1 << mmu3->ways; + mmu->u_dtlb = mmu3->u_dtlb; + mmu->u_itlb = mmu3->u_itlb; + } + + mmu->num_tlb = mmu->sets * mmu->ways; +} + +void __init arc_mmu_init(void) +{ + /* + * ASID mgmt data structures are compile time init + * asid_cache = FIRST_ASID and asid_mm_map[] all zeroes + */ + + local_flush_tlb_all(); + + /* Enable the MMU */ + write_aux_reg(ARC_REG_PID, MMU_ENABLE); +} + +/* + * TLB Programmer's Model uses Linear Indexes: 0 to {255, 511} for 128 x {2,4} + * The mapping is Column-first. + * --------------------- ----------- + * |way0|way1|way2|way3| |way0|way1| + * --------------------- ----------- + * [set0] | 0 | 1 | 2 | 3 | | 0 | 1 | + * [set1] | 4 | 5 | 6 | 7 | | 2 | 3 | + * ~ ~ ~ ~ + * [set127] | 508| 509| 510| 511| | 254| 255| + * --------------------- ----------- + * For normal operations we don't(must not) care how above works since + * MMU cmd getIndex(vaddr) abstracts that out. + * However for walking WAYS of a SET, we need to know this + */ +#define SET_WAY_TO_IDX(mmu, set, way) ((set) * mmu->ways + (way)) + +/* Handling of Duplicate PD (TLB entry) in MMU. + * -Could be due to buggy customer tapeouts or obscure kernel bugs + * -MMU complaints not at the time of duplicate PD installation, but at the + * time of lookup matching multiple ways. + * -Ideally these should never happen - but if they do - workaround by deleting + * the duplicate one. + * -Knob to be verbose abt it.(TODO: hook them up to debugfs) + */ +volatile int dup_pd_verbose = 1;/* Be slient abt it or complain (default) */ + +void do_tlb_overlap_fault(unsigned long cause, unsigned long address, + struct pt_regs *regs) +{ + int set, way, n; + unsigned int pd0[4], pd1[4]; /* assume max 4 ways */ + unsigned long flags, is_valid; + struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu; + + local_irq_save(flags); + + /* re-enable the MMU */ + write_aux_reg(ARC_REG_PID, MMU_ENABLE | read_aux_reg(ARC_REG_PID)); + + /* loop thru all sets of TLB */ + for (set = 0; set < mmu->sets; set++) { + + /* read out all the ways of current set */ + for (way = 0, is_valid = 0; way < mmu->ways; way++) { + write_aux_reg(ARC_REG_TLBINDEX, + SET_WAY_TO_IDX(mmu, set, way)); + write_aux_reg(ARC_REG_TLBCOMMAND, TLBRead); + pd0[way] = read_aux_reg(ARC_REG_TLBPD0); + pd1[way] = read_aux_reg(ARC_REG_TLBPD1); + is_valid |= pd0[way] & _PAGE_PRESENT; + } + + /* If all the WAYS in SET are empty, skip to next SET */ + if (!is_valid) + continue; + + /* Scan the set for duplicate ways: needs a nested loop */ + for (way = 0; way < mmu->ways; way++) { + if (!pd0[way]) + continue; + + for (n = way + 1; n < mmu->ways; n++) { + if ((pd0[way] & PAGE_MASK) == + (pd0[n] & PAGE_MASK)) { + + if (dup_pd_verbose) { + pr_info("Duplicate PD's @" + "[%d:%d]/[%d:%d]\n", + set, way, set, n); + pr_info("TLBPD0[%u]: %08x\n", + way, pd0[way]); + } + + /* + * clear entry @way and not @n. This is + * critical to our optimised loop + */ + pd0[way] = pd1[way] = 0; + write_aux_reg(ARC_REG_TLBINDEX, + SET_WAY_TO_IDX(mmu, set, way)); + __tlb_entry_erase(); + } + } + } + } + + local_irq_restore(flags); +} + +/*********************************************************************** + * Diagnostic Routines + * -Called from Low Level TLB Hanlders if things don;t look good + **********************************************************************/ + +#ifdef CONFIG_ARC_DBG_TLB_PARANOIA + +/* + * Low Level ASM TLB handler calls this if it finds that HW and SW ASIDS + * don't match + */ +void print_asid_mismatch(int is_fast_path) +{ + int pid_sw, pid_hw; + pid_sw = current->active_mm->context.asid; + pid_hw = read_aux_reg(ARC_REG_PID) & 0xff; + + pr_emerg("ASID Mismatch in %s Path Handler: sw-pid=0x%x hw-pid=0x%x\n", + is_fast_path ? "Fast" : "Slow", pid_sw, pid_hw); + + __asm__ __volatile__("flag 1"); +} + +void tlb_paranoid_check(unsigned int pid_sw, unsigned long addr) +{ + unsigned int pid_hw; + + pid_hw = read_aux_reg(ARC_REG_PID) & 0xff; + + if (addr < 0x70000000 && ((pid_hw != pid_sw) || (pid_sw == NO_ASID))) + print_asid_mismatch(0); +} +#endif diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S new file mode 100644 index 0000000..fc5b971 --- /dev/null +++ b/arch/arc/mm/tlbex.S @@ -0,0 +1,351 @@ +/* + * TLB Exception Handling for ARC + * + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Vineetg: April 2011 : + * -MMU v1: moved out legacy code into a seperate file + * -MMU v3: PD{0,1} bits layout changed: They don't overlap anymore, + * helps avoid a shift when preparing PD0 from PTE + * + * Vineetg: July 2009 + * -For MMU V2, we need not do heuristics at the time of commiting a D-TLB + * entry, so that it doesn't knock out it's I-TLB entry + * -Some more fine tuning: + * bmsk instead of add, asl.cc instead of branch, delay slot utilise etc + * + * Vineetg: July 2009 + * -Practically rewrote the I/D TLB Miss handlers + * Now 40 and 135 instructions a peice as compared to 131 and 449 resp. + * Hence Leaner by 1.5 K + * Used Conditional arithmetic to replace excessive branching + * Also used short instructions wherever possible + * + * Vineetg: Aug 13th 2008 + * -Passing ECR (Exception Cause REG) to do_page_fault( ) for printing + * more information in case of a Fatality + * + * Vineetg: March 25th Bug #92690 + * -Added Debug Code to check if sw-ASID == hw-ASID + + * Rahul Trivedi, Amit Bhor: Codito Technologies 2004 + */ + + .cpu A7 + +#include +#include +#include +#include +#include +#include +#include +#if (CONFIG_ARC_MMU_VER == 1) +#include +#endif + +;-------------------------------------------------------------------------- +; scratch memory to save the registers (r0-r3) used to code TLB refill Handler +; For details refer to comments before TLBMISS_FREEUP_REGS below +;-------------------------------------------------------------------------- + + .section .data + .global ex_saved_reg1 + .align 1 << L1_CACHE_SHIFT ; IMP: Must be Cache Line aligned + .type ex_saved_reg1, @object + .size ex_saved_reg1, 16 +ex_saved_reg1: + .zero 16 + +;============================================================================ +; Troubleshooting Stuff +;============================================================================ + +; Linux keeps ASID (Address Space ID) in task->active_mm->context.asid +; When Creating TLB Entries, instead of doing 3 dependent loads from memory, +; we use the MMU PID Reg to get current ASID. +; In bizzare scenrios SW and HW ASID can get out-of-sync which is trouble. +; So we try to detect this in TLB Mis shandler + + +.macro DBG_ASID_MISMATCH + +#ifdef CONFIG_ARC_DBG_TLB_PARANOIA + + ; make sure h/w ASID is same as s/w ASID + + GET_CURR_TASK_ON_CPU r3 + ld r0, [r3, TASK_ACT_MM] + ld r0, [r0, MM_CTXT+MM_CTXT_ASID] + + lr r1, [ARC_REG_PID] + and r1, r1, 0xFF + breq r1, r0, 5f + + ; Error if H/w and S/w ASID don't match, but NOT if in kernel mode + lr r0, [erstatus] + bbit0 r0, STATUS_U_BIT, 5f + + ; We sure are in troubled waters, Flag the error, but to do so + ; need to switch to kernel mode stack to call error routine + GET_TSK_STACK_BASE r3, sp + + ; Call printk to shoutout aloud + mov r0, 1 + j print_asid_mismatch + +5: ; ASIDs match so proceed normally + nop + +#endif + +.endm + +;============================================================================ +;TLB Miss handling Code +;============================================================================ + +;----------------------------------------------------------------------------- +; This macro does the page-table lookup for the faulting address. +; OUT: r0 = PTE faulted on, r1 = ptr to PTE, r2 = Faulting V-address +.macro LOAD_FAULT_PTE + + lr r2, [efa] + + lr r1, [ARC_REG_SCRATCH_DATA0] ; current pgd + + lsr r0, r2, PGDIR_SHIFT ; Bits for indexing into PGD + ld.as r1, [r1, r0] ; PGD entry corresp to faulting addr + and.f r1, r1, PAGE_MASK ; Ignoring protection and other flags + ; contains Ptr to Page Table + bz.d do_slow_path_pf ; if no Page Table, do page fault + + ; Get the PTE entry: The idea is + ; (1) x = addr >> PAGE_SHIFT -> masks page-off bits from @fault-addr + ; (2) y = x & (PTRS_PER_PTE - 1) -> to get index + ; (3) z = pgtbl[y] + ; To avoid the multiply by in end, we do the -2, <<2 below + + lsr r0, r2, (PAGE_SHIFT - 2) + and r0, r0, ( (PTRS_PER_PTE - 1) << 2) + ld.aw r0, [r1, r0] ; get PTE and PTE ptr for fault addr + +.endm + +;----------------------------------------------------------------- +; Convert Linux PTE entry into TLB entry +; A one-word PTE entry is programmed as two-word TLB Entry [PD0:PD1] in mmu +; IN: r0 = PTE, r1 = ptr to PTE + +.macro CONV_PTE_TO_TLB + and r3, r0, PTE_BITS_IN_PD1 ; Extract permission flags+PFN from PTE + sr r3, [ARC_REG_TLBPD1] ; these go in PD1 + + and r2, r0, PTE_BITS_IN_PD0 ; Extract other PTE flags: (V)alid, (G)lb +#if (CONFIG_ARC_MMU_VER <= 2) /* Neednot be done with v3 onwards */ + lsr r2, r2 ; shift PTE flags to match layout in PD0 +#endif + + lr r3,[ARC_REG_TLBPD0] ; MMU prepares PD0 with vaddr and asid + + or r3, r3, r2 ; S | vaddr | {sasid|asid} + sr r3,[ARC_REG_TLBPD0] ; rewrite PD0 +.endm + +;----------------------------------------------------------------- +; Commit the TLB entry into MMU + +.macro COMMIT_ENTRY_TO_MMU + + /* Get free TLB slot: Set = computed from vaddr, way = random */ + sr TLBGetIndex, [ARC_REG_TLBCOMMAND] + + /* Commit the Write */ +#if (CONFIG_ARC_MMU_VER >= 2) /* introduced in v2 */ + sr TLBWriteNI, [ARC_REG_TLBCOMMAND] +#else + sr TLBWrite, [ARC_REG_TLBCOMMAND] +#endif +.endm + +;----------------------------------------------------------------- +; ARC700 Exception Handling doesn't auto-switch stack and it only provides +; ONE scratch AUX reg "ARC_REG_SCRATCH_DATA0" +; +; For Non-SMP, the scratch AUX reg is repurposed to cache task PGD, so a +; "global" is used to free-up FIRST core reg to be able to code the rest of +; exception prologue (IRQ auto-disabled on Exceptions, so it's IRQ-safe). +; Since the Fast Path TLB Miss handler is coded with 4 regs, the remaining 3 +; need to be saved as well by extending the "global" to be 4 words. Hence +; ".size ex_saved_reg1, 16" +; [All of this dance is to avoid stack switching for each TLB Miss, since we +; only need to save only a handful of regs, as opposed to complete reg file] + +; As simple as that.... + +.macro TLBMISS_FREEUP_REGS + st r0, [@ex_saved_reg1] + mov_s r0, @ex_saved_reg1 + st_s r1, [r0, 4] + st_s r2, [r0, 8] + st_s r3, [r0, 12] + + ; VERIFY if the ASID in MMU-PID Reg is same as + ; one in Linux data structures + + DBG_ASID_MISMATCH +.endm + +;----------------------------------------------------------------- +.macro TLBMISS_RESTORE_REGS + mov_s r0, @ex_saved_reg1 + ld_s r3, [r0,12] + ld_s r2, [r0, 8] + ld_s r1, [r0, 4] + ld_s r0, [r0] +.endm + +.section .text, "ax",@progbits ;Fast Path Code, candidate for ICCM + +;----------------------------------------------------------------------------- +; I-TLB Miss Exception Handler +;----------------------------------------------------------------------------- + +ARC_ENTRY EV_TLBMissI + + TLBMISS_FREEUP_REGS + + ;---------------------------------------------------------------- + ; Get the PTE corresponding to V-addr accessed + LOAD_FAULT_PTE + + ;---------------------------------------------------------------- + ; VERIFY_PTE: Check if PTE permissions approp for executing code + cmp_s r2, VMALLOC_START + mov.lo r2, (_PAGE_PRESENT | _PAGE_READ | _PAGE_EXECUTE) + mov.hs r2, (_PAGE_PRESENT | _PAGE_K_READ | _PAGE_K_EXECUTE) + + and r3, r0, r2 ; Mask out NON Flag bits from PTE + xor.f r3, r3, r2 ; check ( ( pte & flags_test ) == flags_test ) + bnz do_slow_path_pf + + ; Let Linux VM know that the page was accessed + or r0, r0, (_PAGE_PRESENT | _PAGE_ACCESSED) ; set Accessed Bit + st_s r0, [r1] ; Write back PTE + + CONV_PTE_TO_TLB + COMMIT_ENTRY_TO_MMU + TLBMISS_RESTORE_REGS + rtie + +ARC_EXIT EV_TLBMissI + +;----------------------------------------------------------------------------- +; D-TLB Miss Exception Handler +;----------------------------------------------------------------------------- + +ARC_ENTRY EV_TLBMissD + + TLBMISS_FREEUP_REGS + + ;---------------------------------------------------------------- + ; Get the PTE corresponding to V-addr accessed + ; If PTE exists, it will setup, r0 = PTE, r1 = Ptr to PTE + LOAD_FAULT_PTE + + ;---------------------------------------------------------------- + ; VERIFY_PTE: Chk if PTE permissions approp for data access (R/W/R+W) + + mov_s r2, 0 + lr r3, [ecr] + btst_s r3, ECR_C_BIT_DTLB_LD_MISS ; Read Access + or.nz r2, r2, _PAGE_READ ; chk for Read flag in PTE + btst_s r3, ECR_C_BIT_DTLB_ST_MISS ; Write Access + or.nz r2, r2, _PAGE_WRITE ; chk for Write flag in PTE + ; Above laddering takes care of XCHG access + ; which is both Read and Write + + ; If kernel mode access, ; make _PAGE_xx flags as _PAGE_K_xx + ; For copy_(to|from)_user, despite exception taken in kernel mode, + ; this code is not hit, because EFA would still be the user mode + ; address (EFA < 0x6000_0000). + ; This code is for legit kernel mode faults, vmalloc specifically + ; (EFA: 0x7000_0000 to 0x7FFF_FFFF) + + lr r3, [efa] + cmp r3, VMALLOC_START - 1 ; If kernel mode access + asl.hi r2, r2, 3 ; make _PAGE_xx flags as _PAGE_K_xx + or r2, r2, _PAGE_PRESENT ; Common flag for K/U mode + + ; By now, r2 setup with all the Flags we need to check in PTE + and r3, r0, r2 ; Mask out NON Flag bits from PTE + brne.d r3, r2, do_slow_path_pf ; is ((pte & flags_test) == flags_test) + + ;---------------------------------------------------------------- + ; UPDATE_PTE: Let Linux VM know that page was accessed/dirty + lr r3, [ecr] + or r0, r0, (_PAGE_PRESENT | _PAGE_ACCESSED) ; Accessed bit always + btst_s r3, ECR_C_BIT_DTLB_ST_MISS ; See if it was a Write Access ? + or.nz r0, r0, _PAGE_MODIFIED ; if Write, set Dirty bit as well + st_s r0, [r1] ; Write back PTE + + CONV_PTE_TO_TLB + +#if (CONFIG_ARC_MMU_VER == 1) + ; MMU with 2 way set assoc J-TLB, needs some help in pathetic case of + ; memcpy where 3 parties contend for 2 ways, ensuing a livelock. + ; But only for old MMU or one with Metal Fix + TLB_WRITE_HEURISTICS +#endif + + COMMIT_ENTRY_TO_MMU + TLBMISS_RESTORE_REGS + rtie + +;-------- Common routine to call Linux Page Fault Handler ----------- +do_slow_path_pf: + + ; Restore the 4-scratch regs saved by fast path miss handler + TLBMISS_RESTORE_REGS + + ; Slow path TLB Miss handled as a regular ARC Exception + ; (stack switching / save the complete reg-file). + ; That requires freeing up r9 + EXCPN_PROLOG_FREEUP_REG r9 + + lr r9, [erstatus] + + SWITCH_TO_KERNEL_STK + SAVE_ALL_SYS + + ; ------- setup args for Linux Page fault Hanlder --------- + mov_s r0, sp + lr r2, [efa] + lr r3, [ecr] + + ; Both st and ex imply WRITE access of some sort, hence do_page_fault( ) + ; invoked with write=1 for DTLB-st/ex Miss and write=0 for ITLB miss or + ; DTLB-ld Miss + ; DTLB Miss Cause code is ld = 0x01 , st = 0x02, ex = 0x03 + ; Following code uses that fact that st/ex have one bit in common + + btst_s r3, ECR_C_BIT_DTLB_ST_MISS + mov.z r1, 0 + mov.nz r1, 1 + + ; We don't want exceptions to be disabled while the fault is handled. + ; Now that we have saved the context we return from exception hence + ; exceptions get re-enable + + FAKE_RET_FROM_EXCPN r9 + + bl do_page_fault + b ret_from_exception + +ARC_EXIT EV_TLBMissD + +ARC_ENTRY EV_TLBMissB ; Bogus entry to measure sz of DTLBMiss hdlr -- 1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/