Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754698Ab2KVSiu (ORCPT ); Thu, 22 Nov 2012 13:38:50 -0500 Received: from mga11.intel.com ([192.55.52.93]:5693 "EHLO mga11.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753367Ab2KVSis (ORCPT ); Thu, 22 Nov 2012 13:38:48 -0500 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="4.83,299,1352102400"; d="scan'208";a="252761618" Message-ID: <1353571951.2297.7.camel@rzhang1-mobl4> Subject: Re: [PATCH 1/4] thermal: Add new thermal trend type to support quick cooling From: Zhang Rui To: Amit Kachhap Cc: linux-pm@lists.linux-foundation.org, linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org, durgadoss.r@intel.com, lenb@kernel.org, linux-acpi@vger.kernel.org, jonghwa3.lee@samsung.com Date: Thu, 22 Nov 2012 16:12:31 +0800 In-Reply-To: References: <1352348786-24255-1-git-send-email-amit.kachhap@linaro.org> <1352348786-24255-2-git-send-email-amit.kachhap@linaro.org> <1353547324.2172.1.camel@rzhang1-mobl4> Content-Type: text/plain; charset="UTF-8" X-Mailer: Evolution 3.2.3-0ubuntu6 Content-Transfer-Encoding: 7bit Mime-Version: 1.0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4198 Lines: 89 On Thu, 2012-11-22 at 10:11 +0530, Amit Kachhap wrote: > On 22 November 2012 06:52, Zhang Rui wrote: > > On Thu, 2012-11-08 at 09:56 +0530, Amit Daniel Kachhap wrote: > >> This modification adds 2 new thermal trend type THERMAL_TREND_RAISE_FULL > >> and THERMAL_TREND_DROP_FULL. This thermal trend can be used to quickly > >> jump to the upper or lower cooling level instead of incremental increase > >> or decrease. This is needed for temperature sensors which support rising/falling > >> threshold interrupts and polling can be totally avoided. > >> > >> Signed-off-by: Amit Daniel Kachhap > >> Signed-off-by: Amit Daniel Kachhap > >> --- > >> drivers/thermal/step_wise.c | 19 +++++++++++++++---- > >> include/linux/thermal.h | 2 ++ > >> 2 files changed, 17 insertions(+), 4 deletions(-) > >> > >> diff --git a/drivers/thermal/step_wise.c b/drivers/thermal/step_wise.c > >> index 1242cff..0d2d8d6 100644 > >> --- a/drivers/thermal/step_wise.c > >> +++ b/drivers/thermal/step_wise.c > >> @@ -35,6 +35,10 @@ > >> * state for this trip point > >> * b. if the trend is THERMAL_TREND_DROPPING, use lower cooling > >> * state for this trip point > >> + * c. if the trend is THERMAL_TREND_RAISE_FULL, use highest cooling > >> + * state for this trip point > >> + * d. if the trend is THERMAL_TREND_DROP_FULL, use lowest cooling > >> + * state for this trip point > >> */ > >> static unsigned long get_target_state(struct thermal_instance *instance, > >> enum thermal_trend trend) > >> @@ -50,7 +54,10 @@ static unsigned long get_target_state(struct thermal_instance *instance, > >> } else if (trend == THERMAL_TREND_DROPPING) { > >> cur_state = cur_state > instance->lower ? > >> (cur_state - 1) : instance->lower; > >> - } > >> + } else if (trend == THERMAL_TREND_RAISE_FULL) > >> + cur_state = instance->upper; > >> + else if (trend == THERMAL_TREND_DROP_FULL) > >> + cur_state = instance->lower; > >> > >> return cur_state; > >> } > >> @@ -87,7 +94,8 @@ static void update_instance_for_throttle(struct thermal_zone_device *tz, > >> } > >> > >> static void update_instance_for_dethrottle(struct thermal_zone_device *tz, > >> - int trip, enum thermal_trip_type trip_type) > >> + int trip, enum thermal_trip_type trip_type, > >> + enum thermal_trend trend) > >> { > >> struct thermal_instance *instance; > >> struct thermal_cooling_device *cdev; > >> @@ -101,7 +109,10 @@ static void update_instance_for_dethrottle(struct thermal_zone_device *tz, > >> cdev = instance->cdev; > >> cdev->ops->get_cur_state(cdev, &cur_state); > >> > >> - instance->target = cur_state > instance->lower ? > >> + if (trend == THERMAL_TREND_DROP_FULL) > >> + instance->target = instance->lower; > >> + else > >> + instance->target = cur_state > instance->lower ? > >> (cur_state - 1) : THERMAL_NO_TARGET; > >> > > what do you expect to happen if the trend is THERMAL_TREND_RAISE_FULL at > > this time? > > > Hi Rui, > > I suppose this is dethrotle routine and hence this will be called when > only drop in temperature happens. Also I did not used get_target_state > here because I thought it might cause regression in the other existing > thermal drivers(I am not sure) But I guess calling get_target_state is > the good way to know next target state and is fine if you agree. > Also one suggestion, 2 functions for throttle/dethrottle can be merged > as both look same and just get_target_state can be used in that > function > agree. patches have been refreshed, please review. thanks, rui -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/