Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755602Ab2KVSqV (ORCPT ); Thu, 22 Nov 2012 13:46:21 -0500 Received: from mail-da0-f46.google.com ([209.85.210.46]:43510 "EHLO mail-da0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755577Ab2KVSqQ (ORCPT ); Thu, 22 Nov 2012 13:46:16 -0500 From: "Rajanikanth H.V" To: rob.herring@calxeda.com, robherring2@gmail.com, francescolavra.fl@gmail.com, anton.vorontsov@linaro.org Cc: lee.jones@linaro.org, arnd@arndb.de, linus.walleij@stericsson.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linaro-dev@lists.linaro.org, patches@linaro.org, STEricsson_nomadik_linux@list.st.com, rajanikanth.hv@stericsson.com, "Rajanikanth H.V" Subject: =?UTF-8?q?=5BPATCH=202/4=5D=20mfd=3A=20ab8500=3A=20add=20devicetree=20support=20for=20btemp?= Date: Fri, 23 Nov 2012 00:13:45 +0530 Message-Id: <1353609827-8218-3-git-send-email-rajanikanth.hv@linaro.org> X-Mailer: git-send-email 1.7.10.4 In-Reply-To: <1353609827-8218-1-git-send-email-rajanikanth.hv@linaro.org> References: <1353609827-8218-1-git-send-email-rajanikanth.hv@linaro.org> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 9811 Lines: 286 From: "Rajanikanth H.V" This patch adds device tree support for battery-temperature-monitor driver Signed-off-by: Rajanikanth H.V --- Documentation/devicetree/bindings/mfd/ab8500.txt | 6 ++ .../bindings/power_supply/ab8500/btemp.txt | 16 +++++ arch/arm/boot/dts/dbx5x0.dtsi | 5 ++ drivers/mfd/ab8500-core.c | 5 ++ drivers/power/Kconfig | 6 -- drivers/power/ab8500_bmdata.c | 4 +- drivers/power/ab8500_btemp.c | 65 ++++++++++++-------- 7 files changed, 73 insertions(+), 34 deletions(-) create mode 100644 Documentation/devicetree/bindings/power_supply/ab8500/btemp.txt diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt index 6ca8d81..f2ee0e7 100644 --- a/Documentation/devicetree/bindings/mfd/ab8500.txt +++ b/Documentation/devicetree/bindings/mfd/ab8500.txt @@ -30,6 +30,12 @@ ab8500-fg : : vddadc : Fuel Gauge : LOW_BAT_F : : LOW threshold battery voltage : CC_INT_CALIB : : Coulomb Counter Internal Calibration : CCEOC : : Coulomb Counter End of Conversion +ab8500-btemp : : vtvout : Battery Temperature + : BAT_CTRL_INDB : : Battery Removal Indicator + : BTEMP_LOW : : Btemp < BtempLow, if battery temperature is lower than -10°C + : BTEMP_LOW_MEDIUM : : BtempLow < Btemp < BtempMedium,if battery temperature is between -10 and 0°C + : BTEMP_MEDIUM_HIGH : : BtempMedium < Btemp < BtempHigh,if battery temperature is between 0°C and“MaxTemp + : BTEMP_HIGH : : Btemp > BtempHigh, if battery temperature is higher than “MaxTemp ab8500-gpadc : HW_CONV_END : vddadc : Analogue to Digital Converter SW_CONV_END : : ab8500-gpio : : : GPIO Controller diff --git a/Documentation/devicetree/bindings/power_supply/ab8500/btemp.txt b/Documentation/devicetree/bindings/power_supply/ab8500/btemp.txt new file mode 100644 index 0000000..0ba1bcc --- /dev/null +++ b/Documentation/devicetree/bindings/power_supply/ab8500/btemp.txt @@ -0,0 +1,16 @@ +=== AB8500 Battery Temperature Monitor Driver === + +The properties below describes the node for btemp driver. + +Required Properties: +- compatible = Shall be: "stericsson,ab8500-btemp" +- battery = Shall be battery specific information + + Example: + ab8500_btemp { + compatible = "stericsson,ab8500-btemp"; + battery = <&ab8500_battery>; + }; + +For information on battery specific node, Ref: +Documentation/devicetree/bindings/power_supply/ab8500/fg.txt diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 155cf53..3f1d899 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -357,6 +357,11 @@ thermistor-on-batctrl; }; + ab8500-btemp { + compatible = "stericsson,ab8500-btemp"; + battery = <&ab8500_battery>; + }; + ab8500-fg { compatible = "stericsson,ab8500-fg"; battery = <&ab8500_battery>; diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 7c3017b..94d45be 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -1046,8 +1046,13 @@ static struct mfd_cell __devinitdata ab8500_bm_devs[] = { }, { .name = "ab8500-btemp", + .of_compatible = "stericsson,ab8500-btemp", .num_resources = ARRAY_SIZE(ab8500_btemp_resources), .resources = ab8500_btemp_resources, +#ifndef CONFIG_OF + .platform_data = &ab8500_bm_data, + .pdata_size = sizeof(ab8500_bm_data), +#endif }, { .name = "ab8500-fg", diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 49a8939..027f74e 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -329,12 +329,6 @@ config AB8500_BM help Say Y to include support for AB8500 battery management. -config AB8500_BATTERY_THERM_ON_BATCTRL - bool "Thermistor connected on BATCTRL ADC" - depends on AB8500_BM - help - Say Y to enable battery temperature measurements using - thermistor connected on BATCTRL ADC. endif # POWER_SUPPLY source "drivers/power/avs/Kconfig" diff --git a/drivers/power/ab8500_bmdata.c b/drivers/power/ab8500_bmdata.c index 0366270..ff8f055 100644 --- a/drivers/power/ab8500_bmdata.c +++ b/drivers/power/ab8500_bmdata.c @@ -29,7 +29,7 @@ static struct abx500_res_to_temp temp_tbl_A_thermistor[] = { {65, 12500}, }; static struct abx500_res_to_temp temp_tbl_B_thermistor[] = { - {-5, 165418}, + {-5, 200000}, { 0, 159024}, { 5, 151921}, {10, 144300}, @@ -237,7 +237,7 @@ struct abx500_battery_type bat_type_thermistor[] = { }, { .name = POWER_SUPPLY_TECHNOLOGY_LIPO, - .resis_high = 165418, + .resis_high = 200000, .resis_low = 82869, .battery_resistance = 300, .charge_full_design = 900, diff --git a/drivers/power/ab8500_btemp.c b/drivers/power/ab8500_btemp.c index abc2abc..b5dfc77 100644 --- a/drivers/power/ab8500_btemp.c +++ b/drivers/power/ab8500_btemp.c @@ -20,11 +20,13 @@ #include #include #include -#include +#include +#include +#include #include +#include #include #include -#include #define VTVOUT_V 1800 @@ -76,7 +78,6 @@ struct ab8500_btemp_ranges { * @parent: Pointer to the struct ab8500 * @gpadc: Pointer to the struct gpadc * @fg: Pointer to the struct fg - * @pdata: Pointer to the abx500_btemp platform data * @bat: Pointer to the abx500_bm platform data * @btemp_psy: Structure for BTEMP specific battery properties * @events: Structure for information about events triggered @@ -93,7 +94,6 @@ struct ab8500_btemp { struct ab8500 *parent; struct ab8500_gpadc *gpadc; struct ab8500_fg *fg; - struct abx500_bmdevs_plat_data *pdata; struct abx500_bm_data *bat; struct power_supply btemp_psy; struct ab8500_btemp_events events; @@ -955,48 +955,58 @@ static int __devexit ab8500_btemp_remove(struct platform_device *pdev) flush_scheduled_work(); power_supply_unregister(&di->btemp_psy); platform_set_drvdata(pdev, NULL); - kfree(di); return 0; } +static char *supply_interface[] = { + "ab8500_chargalg", + "ab8500_fg", +}; + static int __devinit ab8500_btemp_probe(struct platform_device *pdev) { - struct abx500_bmdevs_plat_data *plat_data = pdev->dev.platform_data; + struct device_node *np = pdev->dev.of_node; struct ab8500_btemp *di; int irq, i, ret = 0; u8 val; - if (!plat_data) { - dev_err(&pdev->dev, "No platform data\n"); - return -EINVAL; + di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL); + if (!di) { + dev_err(&pdev->dev, "%s no mem for ab8500_btemp\n", __func__); + return -ENOMEM; } - di = kzalloc(sizeof(*di), GFP_KERNEL); - if (!di) - return -ENOMEM; + di->bat = pdev->mfd_cell->platform_data; + if (!di->bat) { + if (np) { + ret = bmdevs_of_probe(&pdev->dev, np, &di->bat); + if (ret) { + dev_err(&pdev->dev, + "failed to get battery information\n"); + return ret; + } + } else { + dev_err(&pdev->dev, "missing dt node for ab8500_btemp\n"); + return -EINVAL; + } + } else { + dev_info(&pdev->dev, "falling back to legacy platform data\n"); + } /* get parent data */ di->dev = &pdev->dev; di->parent = dev_get_drvdata(pdev->dev.parent); di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); - /* get btemp specific platform data */ - di->pdata = plat_data; - if (!di->pdata) { - dev_err(di->dev, "no btemp platform data supplied\n"); - ret = -EINVAL; - goto free_device_info; - } - /* BTEMP supply */ di->btemp_psy.name = "ab8500_btemp"; di->btemp_psy.type = POWER_SUPPLY_TYPE_BATTERY; di->btemp_psy.properties = ab8500_btemp_props; di->btemp_psy.num_properties = ARRAY_SIZE(ab8500_btemp_props); di->btemp_psy.get_property = ab8500_btemp_get_property; - di->btemp_psy.supplied_to = di->pdata->supplied_to; - di->btemp_psy.num_supplicants = di->pdata->num_supplicants; + di->btemp_psy.supplied_to = supply_interface; + di->btemp_psy.num_supplicants = ARRAY_SIZE(supply_interface); di->btemp_psy.external_power_changed = ab8500_btemp_external_power_changed; @@ -1006,8 +1016,7 @@ static int __devinit ab8500_btemp_probe(struct platform_device *pdev) create_singlethread_workqueue("ab8500_btemp_wq"); if (di->btemp_wq == NULL) { dev_err(di->dev, "failed to create work queue\n"); - ret = -ENOMEM; - goto free_device_info; + return -ENOMEM; } /* Init work for measuring temperature periodically */ @@ -1085,12 +1094,15 @@ free_irq: } free_btemp_wq: destroy_workqueue(di->btemp_wq); -free_device_info: - kfree(di); return ret; } +static const struct of_device_id ab8500_btemp_match[] = { + { .compatible = "stericsson,ab8500-btemp", }, + { }, +}; + static struct platform_driver ab8500_btemp_driver = { .probe = ab8500_btemp_probe, .remove = __devexit_p(ab8500_btemp_remove), @@ -1099,6 +1111,7 @@ static struct platform_driver ab8500_btemp_driver = { .driver = { .name = "ab8500-btemp", .owner = THIS_MODULE, + .of_match_table = ab8500_btemp_match, }, }; -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/