Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Thu, 12 Sep 2002 11:29:30 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Thu, 12 Sep 2002 11:29:30 -0400 Received: from mail.wp-sa.pl ([212.77.102.105]:49556 "EHLO mail.wp-sa.pl") by vger.kernel.org with ESMTP id ; Thu, 12 Sep 2002 11:29:25 -0400 Date: Thu, 12 Sep 2002 17:33:28 +0200 From: Mariusz Zielinski Subject: unexpected IO-APIC on IBM xSeries 440 To: linux-kernel@vger.kernel.org Reply-to: mzielinski@wp-sa.pl Message-id: <200209121733.28871.mzielinski@wp-sa.pl> Organization: Wirtualna Polska S.A. MIME-version: 1.0 X-Mailer: KMail [version 1.4] Content-type: text/plain; charset=iso-8859-2 Content-transfer-encoding: 7BIT Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 20448 Lines: 464 Hi list, as instructed I'm making contact (attached dmesg). IBM claims that machine is supported under linux (RedHat Advanced Server 2.1) but I couldn't find any patches. Is it possible that RedHat is hiding some patches from linux community? :) The problem is that /proc/cpuinfo shows at most 4 processors (depending on kernel version). Dmesg shows many "APIC error on CPUx: 00(80)" errors. I can provide you with further details (make some tests) if needed. Kernel is preemptible and is compiled with bigmem and acpi enabled. Linux version 2.5.34 (root@levi) (gcc version 2.95.4 20011002 (Debian prerelease)) #2 SMP czw wrz 12 16:32:16 CEST 2002 Video mode to be used for restore is ffff BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000dffb6fc0 (usable) BIOS-e820: 00000000dffb6fc0 - 00000000dffbf800 (ACPI data) BIOS-e820: 00000000dffbf800 - 00000000e0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000120000000 (usable) 3712MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 0009dd40 hm, page 0009d000 reserved twice. hm, page 0009e000 reserved twice. hm, page 0009e000 reserved twice. hm, page 0009f000 reserved twice. WARNING: MP table in the EBDA can be UNSAFE, contact linux-smp@vger.kernel.org if you experience SMP problems! On node 0 totalpages: 1179648 DMA zone: 4096 pages Normal zone: 225280 pages HighMem zone: 950272 pages ACPI: RSDP (v000 IBM ) @ 0x000fdba0 ACPI: RSDT (v001 IBM SERVIGIL 00000.04096) @ 0xdffbf780 ACPI: FADT (v001 IBM SERVIGIL 00000.04096) @ 0xdffbf700 ACPI: MADT (v001 IBM SERVIGIL 00000.04096) @ 0xdffbf600 ACPI: SRAT (v001 IBM SERVIGIL 00000.04096) @ 0xdffbf4c0 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:1 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) Processor #2 15:1 APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x10] enabled) Processor #16 invalid (max 16) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled) Processor #18 invalid (max 16) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x20] enabled) Processor #32 invalid (max 16) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x22] enabled) Processor #34 invalid (max 16) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x30] enabled) Processor #48 invalid (max 16) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x32] enabled) Processor #50 invalid (max 16) ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x0] trigger[0x0] lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] polarity[0x0] trigger[0x0] lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] polarity[0x0] trigger[0x0] lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] polarity[0x0] trigger[0x0] lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] polarity[0x0] trigger[0x0] lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] polarity[0x0] trigger[0x0] lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] polarity[0x0] trigger[0x0] lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] polarity[0x0] trigger[0x0] lint[0x1]) ACPI: IOAPIC (id[0x0e] address[0xfec00000] global_irq_base[0x0]) IOAPIC[0]: Assigned apic_id 14 IOAPIC[0]: apic_id 14, version 17, address 0xfec00000, IRQ 0-50 ACPI: IOAPIC (id[0x0d] address[0xfec01000] global_irq_base[0x33]) IOAPIC[1]: Assigned apic_id 13 IOAPIC[1]: apic_id 13, version 17, address 0xfec01000, IRQ 51-101 ACPI: INT_SRC_OVR (bus[0] irq[0x8] global_irq[0x8] polarity[0x3] trigger[0x1]) ACPI: INT_SRC_OVR (bus[0] irq[0xe] global_irq[0xe] polarity[0x1] trigger[0x0]) ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x24] polarity[0x0] trigger[0x0]) Using ACPI (MADT) for SMP configuration information IBM machine detected. Enabling interrupts during APM calls. IBM machine detected. Disabling SMBus accesses. Kernel command line: auto BOOT_IMAGE=linux-2.5 root=802 BOOT_FILE=/boot/linux-2.5 Initializing CPU#0 Detected 1397.813 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 2703.36 BogoMIPS Memory: 4139296k/4718592k available (1788k kernel code, 54316k reserved, 817k data, 120k init, 3276504k highmem) Security Scaffold v1.0.0 initialized Dentry-cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 0K, L1 D cache: 8K CPU: L2 cache: 256K CPU: L3 cache: 512K CPU: Hyper-Threading is disabled CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available CPU#0: Thermal monitoring enabled CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 0K, L1 D cache: 8K CPU: L2 cache: 256K CPU: L3 cache: 512K CPU: Hyper-Threading is disabled CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000 Intel machine check reporting enabled on CPU#0. CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available CPU#0: Thermal LVT vector (0xf0) already installed CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 CPU0: Intel Pentium 4 (Unknown) stepping 01 per-CPU timeslice cutoff: 731.82 usecs. task migration cache decay timeout: 1 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/2 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 mtrr: SMP support incomplete for this vendor Calibrating delay loop... 2785.28 BogoMIPS CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 0K, L1 D cache: 8K CPU: L2 cache: 256K CPU: L3 cache: 512K CPU: Hyper-Threading is disabled CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000 Intel machine check reporting enabled on CPU#1. CPU#1: Intel P4/Xeon Extended MCE MSRs (12) available CPU#1: Thermal monitoring enabled CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 CPU1: Intel Pentium 4 (Unknown) stepping 01 Total of 2 processors activated (5488.64 BogoMIPS). ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 14-0, 14-2, 14-16, 14-17, 14-18, 14-19, 14-20, 14-21, 14-22, 14-23, 14-24, 14-25, 14-26, 14-27, 14-28, 14-29, 14-30, 14-31, 14-32, 14-33, 14-34, 14-35, 14-37, 14-38, 14-39, 14-40, 14-41, 14-42, 14-43, 14-44, 14-45, 14-46, 14-47, 14-48, 14-49, 14-50, 13-0, 13-1, 13-2, 13-3, 13-4, 13-5, 13-6, 13-7, 13-8, 13-9, 13 -10, 13-11, 13-12, 13-13, 13-14, 13-15, 13-16, 13-17, 13-18, 13-19, 13-20, 13-21, 13-22, 13-23, 13-24, 13-25, 13-26, 13-27, 13-28, 13-29, 13-30, 13-31, 13-32, 13-33, 1 3-34, 13-35, 13-36, 13-37, 13-38, 13-39, 13-40, 13-41, 13-42, 13-43, 13-44, 13-45, 13-46, 13-47, 13-48, 13-49, 13-50 not connected. ..TIMER: vector=0x31 pin1=-1 pin2=0 ...trying to set up timer (IRQ0) through the 8259A ... ..... (found pin 0) ...works. number of MP IRQ sources: 16. number of IO-APIC #14 registers: 51. number of IO-APIC #13 registers: 51. testing the IO APIC....................... IO APIC #14...... .... register #00: 0E000000 ....... : physical APIC id: 0E .... register #01: 00320011 ....... : max redirection entries: 0032 WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 001 01 0 0 0 0 0 1 1 31 01 001 01 0 0 0 0 0 1 1 39 02 000 00 1 0 0 0 0 0 0 00 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 1 0 1 1 69 09 001 01 0 0 0 0 0 1 1 71 0a 001 01 0 0 0 0 0 1 1 79 0b 001 01 0 0 0 0 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 18 000 00 1 0 0 0 0 0 0 00 19 000 00 1 0 0 0 0 0 0 00 1a 000 00 1 0 0 0 0 0 0 00 1b 000 00 1 0 0 0 0 0 0 00 1c 000 00 1 0 0 0 0 0 0 00 1d 000 00 1 0 0 0 0 0 0 00 1e 000 00 1 0 0 0 0 0 0 00 1f 000 00 1 0 0 0 0 0 0 00 20 000 00 1 0 0 0 0 0 0 00 21 000 00 1 0 0 0 0 0 0 00 22 000 00 1 0 0 0 0 0 0 00 23 000 00 1 0 0 0 0 0 0 00 24 001 01 0 0 0 0 0 1 1 71 25 000 00 1 0 0 0 0 0 0 00 26 000 00 1 0 0 0 0 0 0 00 27 000 00 1 0 0 0 0 0 0 00 28 000 00 1 0 0 0 0 0 0 00 29 000 00 1 0 0 0 0 0 0 00 2a 000 00 1 0 0 0 0 0 0 00 2b 000 00 1 0 0 0 0 0 0 00 2c 000 00 1 0 0 0 0 0 0 00 2d 000 00 1 0 0 0 0 0 0 00 2e 000 00 1 0 0 0 0 0 0 00 2f 000 00 1 0 0 0 0 0 0 00 30 000 00 1 0 0 0 0 0 0 00 31 000 00 1 0 0 0 0 0 0 00 32 000 00 1 0 0 0 0 0 0 00 IO APIC #13...... .... register #00: 0D000000 ....... : physical APIC id: 0D .... register #01: 00320011 ....... : max redirection entries: 0032 WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 18 000 00 1 0 0 0 0 0 0 00 19 000 00 1 0 0 0 0 0 0 00 1a 000 00 1 0 0 0 0 0 0 00 1b 000 00 1 0 0 0 0 0 0 00 1c 000 00 1 0 0 0 0 0 0 00 1d 000 00 1 0 0 0 0 0 0 00 1e 000 00 1 0 0 0 0 0 0 00 1f 000 00 1 0 0 0 0 0 0 00 20 000 00 1 0 0 0 0 0 0 00 21 000 00 1 0 0 0 0 0 0 00 22 000 00 1 0 0 0 0 0 0 00 23 000 00 1 0 0 0 0 0 0 00 24 000 00 1 0 0 0 0 0 0 00 25 000 00 1 0 0 0 0 0 0 00 26 000 00 1 0 0 0 0 0 0 00 27 000 00 1 0 0 0 0 0 0 00 28 000 00 1 0 0 0 0 0 0 00 29 000 00 1 0 0 0 0 0 0 00 2a 000 00 1 0 0 0 0 0 0 00 2b 000 00 1 0 0 0 0 0 0 00 2c 000 00 1 0 0 0 0 0 0 00 2d 000 00 1 0 0 0 0 0 0 00 2e 000 00 1 0 0 0 0 0 0 00 2f 000 00 1 0 0 0 0 0 0 00 30 000 00 1 0 0 0 0 0 0 00 31 000 00 1 0 0 0 0 0 0 00 32 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:0 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9-> 0:36 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1396.0951 MHz. ..... host bus clock speed is 99.0782 MHz. cpu: 0, clocks: 99782, slice: 3023 CPU0 checking TSC synchronization across 2 CPUs: passed. Starting migration thread for cpu 0 Bringing up 1 cpu: 1, clocks: 99782, slice: 3023 CPU1 CPU 1 IS NOW UP! Starting migration thread for cpu 1 CPUS done 4294967295 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket PCI: PCI BIOS revision 2.10 entry at 0xfd30d, last bus=11 PCI: Using configuration type 1 ACPI: Subsystem revision 20020829 APIC error on CPU0: 00(80) APIC error on CPU1: 00(80) ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: System [ACPI] (supports S0 S5) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Root Bridge [PCI1] (00:01) PCI: Probing PCI hardware (bus 01) ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT] ACPI: PCI Root Bridge [PCI2] (00:02) PCI: Probing PCI hardware (bus 02) ACPI: PCI Interrupt Routing Table [\_SB_.PCI2._PRT] ACPI: PCI Root Bridge [PCI5] (00:05) PCI: Probing PCI hardware (bus 05) ACPI: PCI Interrupt Routing Table [\_SB_.PCI5._PRT] ACPI: PCI Root Bridge [PCI7] (00:07) PCI: Probing PCI hardware (bus 07) ACPI: PCI Interrupt Routing Table [\_SB_.PCI7._PRT] ACPI: PCI Root Bridge [PCI9] (00:09) PCI: Probing PCI hardware (bus 09) ACPI: PCI Interrupt Routing Table [\_SB_.PCI9._PRT] ACPI: PCI Interrupt Link [LVIA] (IRQs *9) ACPI: PCI Interrupt Link [LVIB] (IRQs *10) ACPI: PCI Interrupt Link [LVIC] (IRQs *3) ACPI: PCI Interrupt Link [LVID] (IRQs *5) ACPI: PCI Interrupt Link [LVUS] (IRQs *7) ACPI: PCI Interrupt Link [LHS1] (IRQs *5) ACPI: PCI Interrupt Link [LHS2] (IRQs *5) ACPI: PCI Interrupt Link [LHS3] (IRQs *5) ACPI: PCI Interrupt Link [LHS4] (IRQs *10) ACPI: PCI Interrupt Link [LHS5] (IRQs *11) ACPI: PCI Interrupt Link [LHS6] (IRQs *15) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found IOAPIC[0]: Set PCI routing entry (14-39 -> 0xa9 -> IRQ 39) 00:00:03[A] -> 14-39 -> vector 0xa9 -> IRQ 39 IOAPIC[0]: Set PCI routing entry (14-16 -> 0xb1 -> IRQ 16) 00:00:04[A] -> 14-16 -> vector 0xb1 -> IRQ 16 IOAPIC[0]: Set PCI routing entry (14-17 -> 0xb9 -> IRQ 17) 00:00:04[B] -> 14-17 -> vector 0xb9 -> IRQ 17 IOAPIC[0]: Set PCI routing entry (14-47 -> 0xc1 -> IRQ 47) 00:00:05[D] -> 14-47 -> vector 0xc1 -> IRQ 47 IOAPIC[0]: Set PCI routing entry (14-40 -> 0xc9 -> IRQ 40) 00:01:03[A] -> 14-40 -> vector 0xc9 -> IRQ 40 IOAPIC[0]: Set PCI routing entry (14-41 -> 0xd1 -> IRQ 41) 00:01:03[B] -> 14-41 -> vector 0xd1 -> IRQ 41 IOAPIC[0]: Set PCI routing entry (14-42 -> 0xd9 -> IRQ 42) 00:01:04[A] -> 14-42 -> vector 0xd9 -> IRQ 42 IOAPIC[1]: Set PCI routing entry (13-0 -> 0xe1 -> IRQ 51) 00:02:01[A] -> 13-0 -> vector 0xe1 -> IRQ 51 IOAPIC[1]: Set PCI routing entry (13-1 -> 0xe9 -> IRQ 52) 00:02:01[B] -> 13-1 -> vector 0xe9 -> IRQ 52 IOAPIC[1]: Set PCI routing entry (13-2 -> 0x32 -> IRQ 53) 00:02:01[C] -> 13-2 -> vector 0x32 -> IRQ 53 IOAPIC[1]: Set PCI routing entry (13-3 -> 0x3a -> IRQ 54) 00:02:01[D] -> 13-3 -> vector 0x3a -> IRQ 54 IOAPIC[1]: Set PCI routing entry (13-4 -> 0x42 -> IRQ 55) 00:02:02[A] -> 13-4 -> vector 0x42 -> IRQ 55 IOAPIC[1]: Set PCI routing entry (13-5 -> 0x4a -> IRQ 56) 00:02:02[B] -> 13-5 -> vector 0x4a -> IRQ 56 IOAPIC[1]: Set PCI routing entry (13-6 -> 0x52 -> IRQ 57) 00:02:02[C] -> 13-6 -> vector 0x52 -> IRQ 57 IOAPIC[1]: Set PCI routing entry (13-7 -> 0x5a -> IRQ 58) 00:02:02[D] -> 13-7 -> vector 0x5a -> IRQ 58 IOAPIC[1]: Set PCI routing entry (13-20 -> 0x62 -> IRQ 71) 00:05:04[A] -> 13-20 -> vector 0x62 -> IRQ 71 IOAPIC[1]: Set PCI routing entry (13-21 -> 0x6a -> IRQ 72) 00:05:04[B] -> 13-21 -> vector 0x6a -> IRQ 72 IOAPIC[1]: Set PCI routing entry (13-22 -> 0x72 -> IRQ 73) 00:05:04[C] -> 13-22 -> vector 0x72 -> IRQ 73 IOAPIC[1]: Set PCI routing entry (13-23 -> 0x7a -> IRQ 74) 00:05:04[D] -> 13-23 -> vector 0x7a -> IRQ 74 IOAPIC[1]: Set PCI routing entry (13-16 -> 0x82 -> IRQ 67) 00:07:03[A] -> 13-16 -> vector 0x82 -> IRQ 67 IOAPIC[1]: Set PCI routing entry (13-17 -> 0x8a -> IRQ 68) 00:07:03[B] -> 13-17 -> vector 0x8a -> IRQ 68 IOAPIC[1]: Set PCI routing entry (13-18 -> 0x92 -> IRQ 69) 00:07:03[C] -> 13-18 -> vector 0x92 -> IRQ 69 IOAPIC[1]: Set PCI routing entry (13-19 -> 0x9a -> IRQ 70) 00:07:03[D] -> 13-19 -> vector 0x9a -> IRQ 70 IOAPIC[1]: Set PCI routing entry (13-8 -> 0xa2 -> IRQ 59) 00:09:01[A] -> 13-8 -> vector 0xa2 -> IRQ 59 IOAPIC[1]: Set PCI routing entry (13-9 -> 0xaa -> IRQ 60) 00:09:01[B] -> 13-9 -> vector 0xaa -> IRQ 60 IOAPIC[1]: Set PCI routing entry (13-10 -> 0xb2 -> IRQ 61) 00:09:01[C] -> 13-10 -> vector 0xb2 -> IRQ 61 IOAPIC[1]: Set PCI routing entry (13-11 -> 0xba -> IRQ 62) 00:09:01[D] -> 13-11 -> vector 0xba -> IRQ 62 IOAPIC[1]: Set PCI routing entry (13-12 -> 0xc2 -> IRQ 63) 00:09:02[A] -> 13-12 -> vector 0xc2 -> IRQ 63 IOAPIC[1]: Set PCI routing entry (13-13 -> 0xca -> IRQ 64) 00:09:02[B] -> 13-13 -> vector 0xca -> IRQ 64 IOAPIC[1]: Set PCI routing entry (13-14 -> 0xd2 -> IRQ 65) 00:09:02[C] -> 13-14 -> vector 0xd2 -> IRQ 65 IOAPIC[1]: Set PCI routing entry (13-15 -> 0xda -> IRQ 66) 00:09:02[D] -> 13-15 -> vector 0xda -> IRQ 66 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' Starting kswapd highmem bounce pool size: 64 pages BIO: pool of 256 setup, 14Kb (56 bytes/bio) biovec: init pool 0, 1 entries, 12 bytes biovec: init pool 1, 4 entries, 48 bytes biovec: init pool 2, 16 entries, 192 bytes biovec: init pool 3, 64 entries, 768 bytes biovec: init pool 4, 128 entries, 1536 bytes biovec: init pool 5, 256 entries, 3072 bytes aio_setup: sizeof(struct page) = 44 Journalled Block Device driver loaded Capability LSM initialized PCI: Enabling Via external APIC routing PCI: Via IRQ fixup for 00:05.2, from 7 to 15 PCI: Via IRQ fixup for 00:05.3, from 7 to 15 ACPI: Power Button (FF) [PWRF] ACPI: Processor [CP07] (supports C1) ACPI: Processor [CP06] (supports C1) ACPI: Processor [CP05] (supports C1) ACPI: Processor [CP04] (supports C1) ACPI: Processor [CP03] (supports C1) ACPI: Processor [CP02] (supports C1) ACPI: Processor [CP01] (supports C1) ACPI: Processor [CP00] (supports C1) -- Mariusz Zielinski - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/